Analysis

Description:

The attractiveness of the Regression Discontinuity Design (RDD) rests on its close similarity to a normal experimental design. On the other hand, it is of limited applicability since it is not often the case that units are assigned to the treatment group on the basis of an observable (to the analyst) pre-program measure. Besides, it only allows identification of the mean impact on a very specific subpopulation. In this technical paper, we show that the RDD straightforwardly generalizes to the instances in which the units' eligibility is established on an observable pre-program measure with eligible units allowed to freely self-select into the program. This set-up also proves to be very convenient for building a specification test on conventional non-experimental estimators of the program mean impact. The data requirements are clearly described.

Description:

In 1961, the European Commission launched a harmonized qualitative survey program to the consumers and the heads of companies (industry, services, construction, retail trade, investments) that covers more than 40 countries today. These qualitative surveys are aimed at understanding the economic situation of these companies. Results are available a few days after the end of the reference period, well before the results of the quantitative surveys.

Although qualitative, these surveys have quickly become an essential tool of the cyclical diagnosis and of the short-term economic forecast. This product shows how these surveys are used by the European Commission, in particular by the Directorate-General for economic and financial Affairs (DG ECFIN) and the Statistical Office of the European Communities (EUROSTAT), to evaluate the economic situation of the Euro zone.

The first part of this product briefly presents the harmonized European business and consumer survey program. In the second part, we look at how DG ECFIN calculates a coincident indicator of the economic activity, using a dynamic factorial analysis of the questions of the survey in industry. This type of indicator makes it possible, in addition, to study the convergence of the economic cycles of the member states. The quantitative short-term indicators for the Euro zone are often criticized for the delay with which they are published. In the third part, we look at how EUROSTAT plans to publish flash estimates of the industrial product price index (IPPI) resulting from econometric models integrating the business survey series. Lastly, we show how these surveys can be used to forecast the gross domestic product (GDP) and to define proxies for some non-available key indicators (new orders in industry, etc.).

Description:

This project seeks to shed light not only on the degree to which individuals are stuck in the low-income range, but also on those who have sufficient opportunity to move into the upper part of the income distribution. It also seeks to compare patterns of mobility through the income distribution in North America and Europe, shedding light on the impact of different models of integration. Cross-National Equivalent File data from the British Household Panel Survey (BHPS) for the United Kingdom, the German Socio-Economic Panel (GSOEP) for Germany, the Panel Study of Income Dynamics (PSID) for the United States and the Survey of Labour Income Dynamics (SLID) for Canada offer a comparative analysis of the dynamics of household income during the 1990s, paying particular attention to both low- and high-income dynamics. Canadian administrative data drawn from income tax files are also used. These panel datasets range in length from six years (for the SLID) to almost 20 years (for the PSID and the Canadian administrative data). The analysis focuses on developments during the 1990s, but also explores the sensitivity of the results to changes in the length of the period analysed.

The analysis begins by offering a broad descriptive overview of the major characteristics and events (demographic versus labour market) that determine levels and changes in adjusted household incomes. Attention is paid to movements into and out of low- and high- income ranges. A number of definitions are used, incorporating absolute and relative notions of poverty. The sensitivity of the results to the use of various equivalence scales is examined. An overview offers a broad picture of the state of household income in each country and the relative roles of family structure, the labour market and welfare state in determining income mobility. The paper employs discrete time-hazard methods to model the dynamics of entry to and exit from both low and high income.

Both observed and unobserved heterogeneity are controlled for with the intention of highlighting differences in the determinants of the transition rates between the countries. This is done in a way that assesses the importance of the relative roles of family, market and state. Attention is also paid to important institutional changes, most notably the increasing integration of product and labour markets in North America and Europe.

Description:

Practitioners often use data collected from complex surveys (such as labour force and health surveys involving stratified cluster sampling) to fit logistic regression and other models of interest. A great deal of effort over the last two decades has been spent on developing methods to analyse survey data that take account of design features. This paper looks at an alternative method known as inverse sampling.

Specialized programs, such as SUDAAN and WESVAR, are also available to implement some of the methods developed to take into account the design features. However, these methods require additional information such as survey weights, design effects or cluster identification of microdata and thus, another method is necessary.

Inverse sampling (Hinkins et al., Survey Methodology, 1977) provides an alternative approach by undoing the complex data structures so that standard methods can be applied. Repeated subsamples with simple random structure are drawn and each subsample is analysed by standard methods and is combined to increase the efficiency. Although computer-intensive, this method has the potential to preserve confidentiality of microdata files. A drawback of the method is that it can lead to biased estimates of regression parameters when the subsample sizes are small (as in the case of stratified cluster sampling).

In this paper, we propose using the estimating equation approach that combines the subsamples before estimation and thus leads to nearly unbiased estimates of regression parameters regardless of subsample sizes. This method is computationally less intensive than the original method. We apply the method to cluster-correlated data generated from a nested error linear regression model to illustrate its advantages. A real dataset from a Statistics Canada survey will also be analysed using the estimating equation method.

Description:

Survey sampling is a statistical domain that has been slow to take advantage of flexible regression methods. In this technical paper, two approaches are discussed that could be used to make these regression methods accessible: adapt the techniques to the complex survey design that has been used or sample the survey data so that the standard techniques are applicable.

In following the former route, we introduce techniques that account for the complex survey structure of the data for scatterplot smoothing and additive models. The use of penalized least squares in the sampling context is studied as a tool for the analysis of a general trend in a finite population. We focus on smooth regression with a normal error model. Ties in covariates abound for large scale surveys resulting in the application of scatterplot smoothers to means. The estimation of smooths (for example, smoothing splines) depends on the sampling design only via the sampling weights, meaning that standard software can be used for estimation. Inference for these curves is more challenging, as a result of correlations induced by the sampling design. We propose and illustrate tests that account for the sampling design. Illustrative examples are given using the Ontario health survey, including scatterplot smoothing, additive models and model diagnostics. In an attempt to resolve the problem by appropriate sampling of the survey data file, we discuss some of the hurdles that are faced when using this approach.

Description:

Analyses of data from social and economic surveys sometimes use generalized variance function models to approximate the design variance of point estimators of population means and proportions. Analysts may use the resulting standard error estimates to compute associated confidence intervals or test statistics for the means and proportions of interest. In comparison with design-based variance estimators computed directly from survey microdata, generalized variance function models have several potential advantages, as will be discussed in this paper, including operational simplicity; increased stability of standard errors; and, for cases involving public-use datasets, reduction of disclosure limitation problems arising from the public release of stratum and cluster indicators.

These potential advantages, however, may be offset in part by several inferential issues. First, the properties of inferential statistics based on generalized variance functions (e.g., confidence interval coverage rates and widths) depend heavily on the relative empirical magnitudes of the components of variability associated, respectively, with:

(a) the random selection of a subset of items used in estimation of the generalized variance function model(b) the selection of sample units under a complex sample design (c) the lack of fit of the generalized variance function model (d) the generation of a finite population under a superpopulation model.

Second, under conditions, one may link each of components (a) through (d) with different empirical measures of the predictive adequacy of a generalized variance function model. Consequently, these measures of predictive adequacy can offer us some insight into the extent to which a given generalized variance function model may be appropriate for inferential use in specific applications.

Some of the proposed diagnostics are applied to data from the US Survey of Doctoral Recipients and the US Current Employment Survey. For the Survey of Doctoral Recipients, components (a), (c) and (d) are of principal concern. For the Current Employment Survey, components (b), (c) and (d) receive principal attention, and the availability of population microdata allow the development of especially detailed models for components (b) and (c).

Description:

Closing remarks

Description:

Opening remarks of the Symposium 2002: Modelling Survey Data for Social and Economic Research, presented by David Binder.

Description:

Keynote Address.

Description:

This study examines trends in the internal migration of the Canadian-born and long-term immigrants into and out of Canada's three largest metropolitan areas.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: We can try our best, but its not always easy knowing what's best for the environment. The world is complicated, and it isn't as simple as reduce, reuse, recycle—though that's a great place to start! In the immortal words of Kermit the Frog, "It's not easy bein' green."

We have two stories exploring that theme. The first is one we made in-house asking just how green our digital world really is, and the second comes from the Simply Science podcast exploring the world of urban forests.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: This paper discusses the management of information within the context of the information industry and indicates some likely future trends related thereto. The information industry itself is first briefly described. Then the process used in producing information, the organizational structure required for such production, and the legislation relating to the information industry are discussed in turn. Finally, some approaches to solving the problems of the future are suggested.

Description: This paper includes a description of interviewer techniques and procedures used to minimize non-response, an outline of methods used to monitor and control non-response, and a discussion of how non-respondents are treated in the data processing and estimation stages of the Canadian Labour Force Survey. Recent non-response rates as well as data on the characteristics of non-respondents are also given. It is concluded that a yearly non-response rate of approximately 5 percent is probably the best that can be achieved in the Labour Force Survey.

Description: Two methods for estimating the correlated response variance of a survey estimator are studied by way of both theoretical comparison and empirical investigation. The variance of these estimators is discussed and the effects of outliers examined. Finally, an improved estimator is developed and evaluated.

Description: Let U = {1, 2, …, i, …, N} be a finite population of N identifiable units. A known “size measure” x_i is associated with unit i; i = 1, 2, ..., N. A sampling procedure for selecting a sample of size n (2 < n < N) with probability proportional to size (PPS) and without replacement (WOR) from the population is proposed. With this method, the inclusion probability is proportional to size (IPPS) for each unit in the population.

Description: Approximate cutoff rules for stratifying a population into a take-all and take-some universe have been given by Dalenius (1950) and Glasser (1962). They expressed the cutoff value (that value which delineates the boundary of the take-all and take-some) as a function of the mean, the sampling weight and the population variance. Their cutoff values were derived on the assumption that a single random sample of size n was to be drawn without replacement from the population of size N.

In the present context, exact and approximate cutoff rules have been worked out for a similar situation. Rather than providing the sample size of the sample, the precision (coefficient of variation) is given. Note that in many sampling situations, the sampler is given a set of objectives in terms of reliability and not sample size. The result is particularly useful for determining the take-all - take-some boundary for samples drawn from a known population. The procedure is also extended to ratio estimation.

Description: Under a sequential sampling plan, the proportion defective in the sample is generally a biased estimator of the population value. In this paper, an unbiased estimator is given. Also, an unbiased estimator of its variance is derived. These results are applied to an estimation problem from the 1976 Canadian Census.

Description: I.P. Fellegi and D. Holt proposed a systematic approach to automatic edit and imputation. An implementation of this proposal was a Generalized Edit and Imputation System by the Hot-Deck Approach, that was utilized in the edit and imputation of the 1976 Canadian Census of Population and Housing. This paper discusses that application, evaluating the strengths and weaknesses of the methodology with some empirical evidence. The system will be considered in relation to the general issues of the edit and imputation of survey data. Some directions for future developments will also be considered.

Description: Owners of small businesses complain about the quantity of forms they are required to collectors of statistics. Administrative data are an alternative source but do not usually include all the information required by the survey takers.

The “Tax Data Imputation System” makes use of tax data collected from a large number of businesses by Revenue Canada and data obtained by sample survey for a small subset of these businesses. Survey data is imputed (estimated) for all the businesses not actually surveyed using a “hot-deck” technique, with adjustments made to ensure certain edit rules are satisfied. The results of a simulation study suggest that this procedure has reasonable statistical properties. Estimators (of means or totals) are unbiased with variances of comparable size to the corresponding ratio estimators.

Description: Frames designed for continuous surveys are sometimes used for ad hoc surveys which require selection of sampling units separate from those selected for the continuous survey. This paper presents an unbiased extension of Keyfitz’s (1951) sample updating method to the case where a portion of the frame has been reserved for surveys other than the main continuous survey. A simple although biased alternative is presented.

The scope under Platek and Singh’s (1975) design strategy for an area based continuous survey requiring updating is then expanded to encompass rotation of first stage units, establishment of a separate special survey sub-frame, and procedures to prevent re-selection of ultimate sampling units.

The methods are evaluated in a Monte Carlo study using Census data to simulate the design for the Canadian Labour Force Survey.

Description: Some estimators alternative to the usual PPS estimator are suggested in this paper for situations where the size measure used for PPS sampling is not correlated with the study variable and where data are available on another supplementary variable (size measure). Properties of these estimators are studied under super-population models and also empirically.

Description:

Health Reports, published by the Health Analysis Division of Statistics Canada, is a peer-reviewed journal of population health and health services research. It is designed for a broad audience that includes health professionals, researchers, policymakers, and the general public. The journal publishes articles of wide interest that contain original and timely analyses of national or provincial/territorial surveys or administrative databases. New articles are published electronically each month.

Health Reports had an impact factor of 5.0 for 2022 and a five-year impact factor of 5.6. All articles are indexed in PubMed. Our online catalogue is free and receives more than 700,000 visits per year. External submissions are welcome.

Description: The Prices Analytical Series provides research and analysis pertaining to price indices. The Analytical series is intended to stimulate discussion on a variety of topics related to the analysis of the evolution of prices through time or space.

Description: The papers published in the Analysis in Brief analytical series shed light on current economic issues. Aimed at a general audience, they cover a wide range of topics including National Accounts, business enterprises, trade, transportation, agriculture, the environment, manufacturing, science and technology, services, etc.

Description: Labour Statistics at a Glance features short analytical articles on specific topics of interest related to Canada's labour market. The studies examine recent or historical trends using data produced by the Centre for Labour Market Information, i.e., the Labour Force Survey, the Survey of Employment Payrolls and Hours, the Job Vacancy and Wage Survey, the Employment Insurance Coverage Survey and the Employment Insurance Statistics Program.

Description: The Health Research Working Paper Series publishes: analytical work-in-progress; background documentation for specific research projects (e.g methodological papers); lengthy reports intended for specific clients, and; compendiums of data tables. Publication in this series does not preclude publication of specific aspects of the work in a peer-reviewed journal.

Description: Environment fact sheets will include short, focused, single-theme analysis on key issues within the changing environment with regards to all Canadians. Over the course of the series, analysis will include topics on: air and climate, pollution and waste, environmental protection and quality, and natural resources.

Description: The ‘Eh Sayers’ podcast explores data of interest to Canadians, like social or news-worthy topics. It also aims to foster data literacy and deliver insight into the lives of Canadians by exploring the data the agency produces and tying it to real life situations through storytelling.

Description: Every year, Statistics Canada collects data from hundreds of surveys. As the amount of data gathered increases, Statistics Canada has introduced infographics to help people, business owners, academics, and management at all levels, understand key information derived from the data. Infographics can be used to quickly communicate a message, to simplify the presentation of large amounts of data, to see data patterns and relationships, and to monitor changes in variables over time.

These infographics will provide a quick overview of Statistics Canada survey data.

Description: This publication presents key highlights and results from the General Social Survey on the topics of caregiving and care receiving; social identity; giving, volunteering and participating; victimization; time use; and family.

Description: Statistics Canada produces videos that present key communications messages to multiple publics in an easy-to-understand way. As a communications tool, they make complex information and ideas easy to interpret by telling a visual story. Statistics Canada has videos on a variety of topics.