Analysis

Description: This paper discusses the management of information within the context of the information industry and indicates some likely future trends related thereto. The information industry itself is first briefly described. Then the process used in producing information, the organizational structure required for such production, and the legislation relating to the information industry are discussed in turn. Finally, some approaches to solving the problems of the future are suggested.

Description: This paper includes a description of interviewer techniques and procedures used to minimize non-response, an outline of methods used to monitor and control non-response, and a discussion of how non-respondents are treated in the data processing and estimation stages of the Canadian Labour Force Survey. Recent non-response rates as well as data on the characteristics of non-respondents are also given. It is concluded that a yearly non-response rate of approximately 5 percent is probably the best that can be achieved in the Labour Force Survey.

Description: Two methods for estimating the correlated response variance of a survey estimator are studied by way of both theoretical comparison and empirical investigation. The variance of these estimators is discussed and the effects of outliers examined. Finally, an improved estimator is developed and evaluated.

Description: Let U = {1, 2, …, i, …, N} be a finite population of N identifiable units. A known “size measure” x_i is associated with unit i; i = 1, 2, ..., N. A sampling procedure for selecting a sample of size n (2 < n < N) with probability proportional to size (PPS) and without replacement (WOR) from the population is proposed. With this method, the inclusion probability is proportional to size (IPPS) for each unit in the population.

Description: Approximate cutoff rules for stratifying a population into a take-all and take-some universe have been given by Dalenius (1950) and Glasser (1962). They expressed the cutoff value (that value which delineates the boundary of the take-all and take-some) as a function of the mean, the sampling weight and the population variance. Their cutoff values were derived on the assumption that a single random sample of size n was to be drawn without replacement from the population of size N.

In the present context, exact and approximate cutoff rules have been worked out for a similar situation. Rather than providing the sample size of the sample, the precision (coefficient of variation) is given. Note that in many sampling situations, the sampler is given a set of objectives in terms of reliability and not sample size. The result is particularly useful for determining the take-all - take-some boundary for samples drawn from a known population. The procedure is also extended to ratio estimation.

Description: Under a sequential sampling plan, the proportion defective in the sample is generally a biased estimator of the population value. In this paper, an unbiased estimator is given. Also, an unbiased estimator of its variance is derived. These results are applied to an estimation problem from the 1976 Canadian Census.

Description: I.P. Fellegi and D. Holt proposed a systematic approach to automatic edit and imputation. An implementation of this proposal was a Generalized Edit and Imputation System by the Hot-Deck Approach, that was utilized in the edit and imputation of the 1976 Canadian Census of Population and Housing. This paper discusses that application, evaluating the strengths and weaknesses of the methodology with some empirical evidence. The system will be considered in relation to the general issues of the edit and imputation of survey data. Some directions for future developments will also be considered.

Description: Owners of small businesses complain about the quantity of forms they are required to collectors of statistics. Administrative data are an alternative source but do not usually include all the information required by the survey takers.

The “Tax Data Imputation System” makes use of tax data collected from a large number of businesses by Revenue Canada and data obtained by sample survey for a small subset of these businesses. Survey data is imputed (estimated) for all the businesses not actually surveyed using a “hot-deck” technique, with adjustments made to ensure certain edit rules are satisfied. The results of a simulation study suggest that this procedure has reasonable statistical properties. Estimators (of means or totals) are unbiased with variances of comparable size to the corresponding ratio estimators.

Description: Frames designed for continuous surveys are sometimes used for ad hoc surveys which require selection of sampling units separate from those selected for the continuous survey. This paper presents an unbiased extension of Keyfitz’s (1951) sample updating method to the case where a portion of the frame has been reserved for surveys other than the main continuous survey. A simple although biased alternative is presented.

The scope under Platek and Singh’s (1975) design strategy for an area based continuous survey requiring updating is then expanded to encompass rotation of first stage units, establishment of a separate special survey sub-frame, and procedures to prevent re-selection of ultimate sampling units.

The methods are evaluated in a Monte Carlo study using Census data to simulate the design for the Canadian Labour Force Survey.

Description: Some estimators alternative to the usual PPS estimator are suggested in this paper for situations where the size measure used for PPS sampling is not correlated with the study variable and where data are available on another supplementary variable (size measure). Properties of these estimators are studied under super-population models and also empirically.

Description: From April 2nd to May 6th, 2024, Statistics Canada conducted the Canadian Survey on Business Conditions. The purpose of this survey is to collect information on businesses in Canada related to emerging issues. This infographic presents key results from this.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This report presents an update to the results from the Survey of Labour and Income Dynamics (SLID) and the Survey of Consumer Finances (SCF) for a variety of important time series and it compares the estimates from the two sources.

Description:

This article investigates the extent to which factors not previously explored in the Canadian context account for wage differences between men and women. It uses data from the Survey of Labour and Income Dynamics (SLID).

Description:

This paper outlines the growth in advanced technology use that has taken place over the last decade in Canadian manufacturing establishments. It presents the percentage of plants that use any one of the advanced technologies studied and how this has changed between 1989 and 1998. It also investigates how growth rates in the 1990s have varied across different technologies in specific functional areas, such as design and engineering, fabrication, communications, and integration and control. In an attempt to discover how changes in technology use are related to certain plant characteristics, the paper then investigates whether the growth in technology use varies across plants that differ by size, nationality and industry. Multivariate analysis is used to investigate the joint effects of plant size, foreign ownership and industry on the incidence of technology adoption and how these effects have changed over the last decade.

Description:

This Juristat examines how much is being spent to operate the justice system in Canada and how many people are working in the system. Trends in spending and personnel are discussed for policing, courts, legal aid, criminal prosecutions, and corrections. Data for the report come from several sources, including the Canadian Centre for Justice Statistics' resource, expenditure and personnel surveys, Statistics Canada's Financial Management System, and Justice Canada. Depending on the source, the data cover the period up to 1996/97 or 1997/98.

Description:

This article examines the family circumstances of 8- to 11-year-old youngsters to assess the link between behaviour and certain family characteristics.

Description:

This article provides information about Internet usage by Canadian households at the end of the 20th century.

Description:

This article looks at those Canadians who moved either to provide care to someone with a long-term health problem or to be looked after by someone else.

Description:

This article examines the location of First Nations communities whose well-being is above average, average and below average. It then compares the living conditions of these First Nations communities with those of other Canadian communities.

Description:

This article draws a brief profile of Canadians who move to improve their quality of life.

Description:

This article compares some selected indicators of psychological and social well-being for married seniors in poor health with those for seniors in good health. It also examines whether the well-being of partners is affected by their spouse's health.

Description: The papers published in the Analysis in Brief analytical series shed light on current economic issues. Aimed at a general audience, they cover a wide range of topics including National Accounts, business enterprises, trade, transportation, agriculture, the environment, manufacturing, science and technology, services, etc.

Description: Labour Statistics at a Glance features short analytical articles on specific topics of interest related to Canada's labour market. The studies examine recent or historical trends using data produced by the Centre for Labour Market Information, i.e., the Labour Force Survey, the Survey of Employment Payrolls and Hours, the Job Vacancy and Wage Survey, the Employment Insurance Coverage Survey and the Employment Insurance Statistics Program.

Description: The Health Research Working Paper Series publishes: analytical work-in-progress; background documentation for specific research projects (e.g methodological papers); lengthy reports intended for specific clients, and; compendiums of data tables. Publication in this series does not preclude publication of specific aspects of the work in a peer-reviewed journal.

Description: Environment fact sheets will include short, focused, single-theme analysis on key issues within the changing environment with regards to all Canadians. Over the course of the series, analysis will include topics on: air and climate, pollution and waste, environmental protection and quality, and natural resources.

Description: The ‘Eh Sayers’ podcast explores data of interest to Canadians, like social or news-worthy topics. It also aims to foster data literacy and deliver insight into the lives of Canadians by exploring the data the agency produces and tying it to real life situations through storytelling.

Description: Every year, Statistics Canada collects data from hundreds of surveys. As the amount of data gathered increases, Statistics Canada has introduced infographics to help people, business owners, academics, and management at all levels, understand key information derived from the data. Infographics can be used to quickly communicate a message, to simplify the presentation of large amounts of data, to see data patterns and relationships, and to monitor changes in variables over time.

These infographics will provide a quick overview of Statistics Canada survey data.

Description: This publication presents key highlights and results from the General Social Survey on the topics of caregiving and care receiving; social identity; giving, volunteering and participating; victimization; time use; and family.

Description: Statistics Canada produces videos that present key communications messages to multiple publics in an easy-to-understand way. As a communications tool, they make complex information and ideas easy to interpret by telling a visual story. Statistics Canada has videos on a variety of topics.

Description: The Canadian Survey on Disability (CSD) is a national survey of Canadians aged 15 and over whose everyday activities are limited because of a long-term condition or health-related problem.

Description: The newsletter offers information aimed at three main groups, businesses (small to medium), communities and ethno-cultural groups/communities. Articles and outreach materials will assist their understanding of national and local data from the many relevant sources found on the Statistics Canada website.