Frames and coverage
Filter results by
Search HelpKeyword(s)
Type
Survey or statistical program
Results
All (70)
All (70) (0 to 10 of 70 results)
- Articles and reports: 75F0002M2023001Description: This discussion paper describes the work being achieved and undertaken by Statistics Canada, in partnership with the Treasury Board of Canada Secretariat, the Department of Finance Canada and the Privy Council Office, on developing the Quality of Life Framework for Canada and related outputs, including an online Hub. This is the first paper in a series that will provide updates on the progress of work relating to the Framework.Release date: 2023-04-19
- Articles and reports: 36-28-0001202300100003Description: Quality of life and well-being research often involves survey content that is subjective in nature, for example questions pertaining to life satisfaction. Two phenomena impacting responses to self-reported life satisfaction are studied across a range of social surveys: the framing effect, where a respondent’s answer is influenced by the theme of the survey or its content; and the mode effect, where a respondent’s answer is influenced by the method in which survey data is collected (with an interviewer, through an online collection portal, etc.). The objective of this paper is to document the effect that survey collection and survey content have on Canadians’ self-reported satisfaction with their lives. The impact of these effects on life satisfaction responses is measured across three Statistics Canada survey series: the General Social Survey, the Canadian Community Health Survey, and the Canadian Social Survey.Release date: 2023-01-25
- Articles and reports: 12-001-X201900300008Description:
Dual frame surveys are useful when no single frame with adequate coverage exists. However estimators from dual frame designs require knowledge of the frame memberships of each sampled unit. When this information is not available from the frame itself, it is often collected from the respondent. When respondents provide incorrect membership information, the resulting estimators of means or totals can be biased. A method for reducing this bias, using accurate membership information obtained about a subsample of respondents, is proposed. The properties of the new estimator are examined and compared to alternative estimators. The proposed estimator is applied to the data from the motivating example, which was a recreational angler survey, using an address frame and an incomplete fishing license frame.
Release date: 2019-12-17 - 4. A modern framework: Breaking new ground ArchivedStats in brief: 11-629-X2019004Description: This video explains the Necessity and Proportionality Framework, which assesses data sensitivity and gathering in a more integrated way while ensuring the data needs of Canadians are met.Release date: 2019-11-26
- Surveys and statistical programs – Documentation: 98-303-XDescription:
The Coverage Technical Report will present the error included in census data that results from either persons being missed (not enumerated) or from persons being enumerated more than once by the 2016 Census. The population coverage error is one of the most important types of errors because it affects not only the accuracy of population counts, but also the accuracy of all the census data results describing the characteristics of the population universe.
Release date: 2019-11-13 - 6. Enterprise Portfolio Management ArchivedStats in brief: 11-629-X2016003Description: Discover how the Enterprise Portfolio Management team (EPM) supports some of Canada’s largest enterprises.Release date: 2016-06-02
- Surveys and statistical programs – Documentation: 11-522-X201700014708Description:
Statistics Canada’s Household Survey Frames (HSF) Programme provides various universe files that can be used alone or in combination to improve survey design, sampling, collection, and processing in the traditional “need to contact a household model.” Even as surveys are migrating onto these core suite of products, the HSF is starting to plan the changes to infrastructure, organisation, and linkages with other data assets in Statistics Canada that will help enable a shift to increased use of a wide variety of administrative data as input to the social statistics programme. The presentation will provide an overview of the HSF Programme, foundational concepts that will need to be implemented to expand linkage potential, and will identify strategic research being under-taken toward 2021.
Release date: 2016-03-24 - Articles and reports: 12-001-X201500114149Description:
This paper introduces a general framework for deriving the optimal inclusion probabilities for a variety of survey contexts in which disseminating survey estimates of pre-established accuracy for a multiplicity of both variables and domains of interest is required. The framework can define either standard stratified or incomplete stratified sampling designs. The optimal inclusion probabilities are obtained by minimizing costs through an algorithm that guarantees the bounding of sampling errors at the domains level, assuming that the domain membership variables are available in the sampling frame. The target variables are unknown, but can be predicted with suitable super-population models. The algorithm takes properly into account this model uncertainty. Some experiments based on real data show the empirical properties of the algorithm.
Release date: 2015-06-29 - Articles and reports: 12-001-X201400214128Description:
Users, funders and providers of official statistics want estimates that are “wider, deeper, quicker, better, cheaper” (channeling Tim Holt, former head of the UK Office for National Statistics), to which I would add “more relevant” and “less burdensome”. Since World War II, we have relied heavily on the probability sample survey as the best we could do - and that best being very good - to meet these goals for estimates of household income and unemployment, self-reported health status, time use, crime victimization, business activity, commodity flows, consumer and business expenditures, et al. Faced with secularly declining unit and item response rates and evidence of reporting error, we have responded in many ways, including the use of multiple survey modes, more sophisticated weighting and imputation methods, adaptive design, cognitive testing of survey items, and other means to maintain data quality. For statistics on the business sector, in order to reduce burden and costs, we long ago moved away from relying solely on surveys to produce needed estimates, but, to date, we have not done that for household surveys, at least not in the United States. I argue that we can and must move from a paradigm of producing the best estimates possible from a survey to that of producing the best possible estimates to meet user needs from multiple data sources. Such sources include administrative records and, increasingly, transaction and Internet-based data. I provide two examples - household income and plumbing facilities - to illustrate my thesis. I suggest ways to inculcate a culture of official statistics that focuses on the end result of relevant, timely, accurate and cost-effective statistics and treats surveys, along with other data sources, as means to that end.
Release date: 2014-12-19 - 10. Overcoverage in the 2011 Canadian Census ArchivedSurveys and statistical programs – Documentation: 11-522-X201300014269Description:
The Census Overcoverage Study (COS) is a critical post-census coverage measurement study. Its main objective is to produce estimates of the number of people erroneously enumerated, by province and territory, study the characteristics of individuals counted multiple times and identify possible reasons for the errors. The COS is based on the sampling and clerical review of groups of connected records that are built by linking the census response database to an administrative frame, and to itself. In this paper we describe the new 2011 COS methodology. This methodology has incorporated numerous improvements including a greater use of probabilistic record-linkage, the estimation of linking parameters with an Expectation-Maximization (E-M) algorithm, and the efficient use of household information to detect more overcoverage cases.
Release date: 2014-10-31
Data (0)
Data (0) (0 results)
No content available at this time.
Analysis (60)
Analysis (60) (10 to 20 of 60 results)
- Articles and reports: 11-522-X200800010979Description:
Prior to 2006, the Canadian Census of Population relied on field staff to deliver questionnaires to all dwellings in Canada. For the 2006 Census, an address frame was created to cover almost 70% of dwellings in Canada, and these questionnaires were delivered by Canada Post. For the 2011 Census, Statistics Canada aims to expand this frame further, with a target of delivering questionnaires by mail to between 80% and 85% of dwellings. Mailing questionnaires for the Census raises a number of issues, among them: ensuring returned questionnaires are counted in the right area, creating an up to date address frame that includes all new growth, and determining which areas are unsuitable for having questionnaires delivered by mail. Changes to the address frame update procedures for 2011, most notably the decision to use purely administrative data as the frame wherever possible and conduct field update exercises only where deemed necessary, provide a new set of challenges for the 2011 Census.
Release date: 2009-12-03 - 12. Wireless substitution in the U.S. and Canada: prevalence and impact on random-digit-dialed health surveys ArchivedArticles and reports: 11-522-X200600110420Description:
Most major survey research organizations in the United States and Canada do not include wireless telephone numbers when conducting random-digit-dialed (RDD) household telephone surveys. In this paper, we offer the most up-to-date estimates available from the U.S. National Center for Health Statistics and Statistics Canada concerning the prevalence and demographic characteristics of the wireless-only population. We then present data from the U.S. National Health Interview Survey on the health and health care access of wireless-only adults, and we examine the potential for coverage bias when health research is conducted using RDD surveys that exclude wireless telephone numbers.
Release date: 2008-03-17 - Articles and reports: 12-001-X200700210492Description:
Multiple Frame Surveys were originally proposed to foster cost savings on the basis of an optimality approach. As surveys on special, rare and difficult-to-sample populations are becoming more prominent, a single list of population units to be used as a sampling frame is often unavailable in sampling practice. In recent literature multiple frame designs have been put forward in order to increase population coverage, to improve response rates and to capture differences and subgroups. Alternative approaches to multiple frame estimation have appeared, all of them relying upon the virtual partition of the set of the available overlapping frames into disjointed domains. Hence the correct classification of sampled units into the domains is required for practical applications. In this paper a multiple frame estimator is proposed using a multiplicity approach. Multiplicity estimators require less information about unit domain membership hence they are insensitive to misclassification. Moreover the proposed estimator is analytically simple so that it is easy to implement and its exact variance is given. Empirical results from an extensive simulation study comparing the multiplicity estimator with major competitors are also provided.
Release date: 2008-01-03 - 14. Estimation of the coverage of the 2000 census of population in Switzerland: Methods and results ArchivedArticles and reports: 12-001-X200700210497Description:
Coverage deficiencies are estimated and analysed for the 2000 population census in Switzerland. For the undercoverage component, the estimation is based on a sample independent of the census and a match with the census. For the overcoverage component, the estimation is based on a sample drawn from the census list and a match with the rest of the census. The over- and undercoverage components are then combined to obtain an estimate of the resulting net coverage. This estimate is based on a capture-recapture model, named the dual system, combined with a synthetic model. The estimators are calculated for the full population and different subgroups, with a variance estimated by a stratified jackknife. The coverage analyses are supplemented by a study of matches between the independent sample and the census in order to determine potential errors of measurement and location in the census data.
Release date: 2008-01-03 - 15. Single frame estimation in multiple frame survey ArchivedArticles and reports: 11-522-X20050019449Description:
Literature about Multiple Frame estimation theory mainly concentrates over the Dual Frame case and it is only rarely concerned with the important practical issue of the variance estimation. By using a multiplicity approach a fixed weights Single Frame estimator for Multiple Frame Survey is proposed.
Release date: 2007-03-02 - 16. The redesign of the Dutch business register ArchivedArticles and reports: 11-522-X20050019452Description:
The redesign of the Dutch Business Register was started for both technical and statistical reasons. The major changes in the new register are the use of the new Dutch Basic Business Register as the source for legal and local units, the inclusion of administrative units in the register and a new automated algorithm to derive the statistical frame from administrative sources.
Release date: 2007-03-02 - Articles and reports: 11-522-X20050019454Geography: CanadaDescription:
The goal of the BR Redesign Project is to simplify, optimize, and harmonize its processes and methods. This paper provides an overview of the BR Redesign with emphasis on the issues that affect the methodology of business surveys.
Release date: 2007-03-02 - Articles and reports: 12-001-X20060029551Description:
To select a survey sample, it happens that one does not have a frame containing the desired collection units, but rather another frame of units linked in a certain way to the list of collection units. It can then be considered to select a sample from the available frame in order to produce an estimate for the desired target population by using the links existing between the two. This can be designated by Indirect Sampling.
Estimation for the target population surveyed by Indirect Sampling can constitute a big challenge, in particular if the links between the units of the two are not one-to-one. The problem comes especially from the difficulty to associate a selection probability, or an estimation weight, to the surveyed units of the target population. In order to solve this type of estimation problem, the Generalized Weight Share Method (GWSM) has been developed by Lavallée (1995) and Lavallée (2002). The GWSM provides an estimation weight for every surveyed unit of the target population.
This paper first describes Indirect Sampling, which constitutes the foundations of the GWSM. Second, an overview of the GWSM is given where we formulate the GWSM in a theoretical framework using matrix notation. Third, we present some properties of the GWSM such as unbiasedness and transitivity. Fourth, we consider the special case where the links between the two populations are expressed by indicator variables. Fifth, some special typical linkages are studied to assess their impact on the GWSM. Finally, we consider the problem of optimality. We obtain optimal weights in a weak sense (for specific values of the variable of interest), and conditions for which these weights are also optimal in a strong sense and independent of the variable of interest.
Release date: 2006-12-21 - Articles and reports: 11-522-X20040018752Description:
This paper outlines some possible applications of the permanent sample of households ready to respond with respect to surveying difficult-to-reach population groups.
Release date: 2005-10-27 - Articles and reports: 11-522-X20040018756Description:
This paper evaluates several approaches that have been used to construct or augment frames for a variety of Statistics Canada surveys. On the basis of these experiences, some good practices for frame construction and use are proposed.
Release date: 2005-10-27
- Previous Go to previous page of Analysis results
- 1 Go to page 1 of Analysis results
- 2 (current) Go to page 2 of Analysis results
- 3 Go to page 3 of Analysis results
- 4 Go to page 4 of Analysis results
- 5 Go to page 5 of Analysis results
- 6 Go to page 6 of Analysis results
- Next Go to next page of Analysis results
Reference (10)
Reference (10) ((10 results))
- Surveys and statistical programs – Documentation: 98-303-XDescription:
The Coverage Technical Report will present the error included in census data that results from either persons being missed (not enumerated) or from persons being enumerated more than once by the 2016 Census. The population coverage error is one of the most important types of errors because it affects not only the accuracy of population counts, but also the accuracy of all the census data results describing the characteristics of the population universe.
Release date: 2019-11-13 - Surveys and statistical programs – Documentation: 11-522-X201700014708Description:
Statistics Canada’s Household Survey Frames (HSF) Programme provides various universe files that can be used alone or in combination to improve survey design, sampling, collection, and processing in the traditional “need to contact a household model.” Even as surveys are migrating onto these core suite of products, the HSF is starting to plan the changes to infrastructure, organisation, and linkages with other data assets in Statistics Canada that will help enable a shift to increased use of a wide variety of administrative data as input to the social statistics programme. The presentation will provide an overview of the HSF Programme, foundational concepts that will need to be implemented to expand linkage potential, and will identify strategic research being under-taken toward 2021.
Release date: 2016-03-24 - 3. Overcoverage in the 2011 Canadian Census ArchivedSurveys and statistical programs – Documentation: 11-522-X201300014269Description:
The Census Overcoverage Study (COS) is a critical post-census coverage measurement study. Its main objective is to produce estimates of the number of people erroneously enumerated, by province and territory, study the characteristics of individuals counted multiple times and identify possible reasons for the errors. The COS is based on the sampling and clerical review of groups of connected records that are built by linking the census response database to an administrative frame, and to itself. In this paper we describe the new 2011 COS methodology. This methodology has incorporated numerous improvements including a greater use of probabilistic record-linkage, the estimation of linking parameters with an Expectation-Maximization (E-M) algorithm, and the efficient use of household information to detect more overcoverage cases.
Release date: 2014-10-31 - 4. Conceptual framework for Culture Statistics 2011 ArchivedSurveys and statistical programs – Documentation: 87-542-X2011001Geography: CanadaDescription:
The first issue of the series presents the Conceptual Framework for Culture Statistics 2011, a revision of the 2004 Canadian Framework for Culture Statistics.
The conceptual framework contains an official statistical definition of culture and describes a set of culture domains that can be used to measure culture from creation to use.
Release date: 2011-10-24 - Surveys and statistical programs – Documentation: 87-542-X2011002Geography: CanadaDescription:
The second issue of this series is a companion piece to the Conceptual Framework for Culture Statistics 2011, a revision to the 2004 Canadian Framework for Culture Statistics.
The guide maps the 2011 Canadian framework for culture statistics to the following Statistics Canada's standard classification systems: the North American Industry Classification System (NAICS) 2007, the North American Product Classification System (NAPCS) - Canada (Provisional Version 0.1), National Occupational Classification - Statistics (NOC-S) 2006 and Classification of Instructional Programs (CIP), Canada, 2000.
It contains explanations, definitions and examples of how the classification codes are mapped to the conceptual framework. It also contains a series of tables that contain codes, by classification system, which help illustrate the framework domains and sub-domains, and flags those codes that do not map well to the framework.
Release date: 2011-10-24 - Surveys and statistical programs – Documentation: 87-542-XGeography: CanadaDescription:
This series the Canadian Framework for Culture Statistics 2011 replaces the 2004 Canadian Framework for Culture Statistics (Catalogue 81-595-MIE2004021).
The first issue of this series presents the conceptual framework, including a definition of culture, domains and sub-domains, and criteria for their inclusion in culture. The second issue is a guide that maps the conceptual framework to selected standard classification systems. It is intended to foster a standard approach to the measurement of culture in Canada.
Release date: 2011-10-24 - Surveys and statistical programs – Documentation: 92-567-XDescription:
The Coverage Technical Report will present the error included in census data that results from persons missed by the 2006 Census or persons enumerated in error. Population coverage errors are one of the most important types of error because they affect not only the accuracy of population counts but also the accuracy of all of the census data describing characteristics of the population universe.
Release date: 2010-03-25 - Surveys and statistical programs – Documentation: 92-394-XDescription:
This report deals with coverage errors that occur when persons, households, dwellings or families are missed or enumerated in error by the census. After the 2001 Census was taken, a number of studies were carried out to estimate gross undercoverage, gross overcoverage and net undercoverage. This report presents the results of the Dwelling Classification Study, the Reverse Record Check Study, the Automated Match Study and the Collective Dwelling Study. The report first describes census universes, coverage error and census collection and processing procedures that may result in coverage error. Then it gives estimates of net undercoverage for a number of demographic characteristics. After, the technical report presents the methodology and results of each coverage study and the estimates of coverage error after describing how the results of the various studies are combined. A historical perspective completes the product.
Release date: 2004-11-25 - Surveys and statistical programs – Documentation: 92-370-XDescription:
Series description
This series includes five general reference products - the Preview of Products and Services; the Catalogue; the Dictionary; the Handbook and the Technical Reports - as well as geography reference products - GeoSuite and Reference Maps.
Product description
Technical Reports examine the quality of data from the 1996 Census, a large and complex undertaking. While considerable effort was taken to ensure high quality standards throughout each step, the results are subject to a certain degree of error. Each report looks at the collection and processing operations and presents results from data evaluation, as well as notes on historical comparability.
Technical Reports are aimed at moderate and sophisticated users but are written in a manner which could make them useful to all census data users. Most of the technical reports have been cancelled, with the exception of Age, Sex, Marital Status and Common-law Status, Coverage and Sampling and Weighting. These reports will be available as bilingual publications as well as being available in both official languages on the Internet as free products.
This report deals with coverage errors, which occured when persons, households, dwellings or families were missed by the 1996 Census or enumerated in error. Coverage errors are one of the most important types of error since they affect not only the accuracy of the counts of the various census universes but also the accuracy of all of the census data describing the characteristics of these universes. With this information, users can determine the risks involved in basing conclusions or decisions on census data.
Release date: 1999-12-14 - Surveys and statistical programs – Documentation: 5241Description: The SRGD is conducting a Global Positioning System (GPS) and digital mapping test to improve Statistic Canada's rural dwelling inventory by collecting dwelling identifiers to be used by field collection staff. In rural areas dwelling identification can be difficult where there is an absence of civic style addresses. The test is evaluating alternative methods for dwelling identification including the collection of GPS coordinates and digital photos using a mapping application and a digital tablet
- Date modified: