Keyword search

View results

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Subject

Type

13 facets displayed. 0 facets selected.

Year of publication

52 facets displayed. 0 facets selected.

Geography

32 facets displayed. 0 facets selected.

Survey or statistical program

732 facets displayed. 0 facets selected.

Portal

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,571)

All (26,571) (0 to 10 of 26,571 results)

  • 1. Daily average foreign exchange rates in Canadian dollars, Bank of Canada
    Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-06-17
  • 2. Workplace artificial intelligence use: A profile of sociodemographic and job characteristics
    Articles and reports: 75-006-X202600100007
    Description: Using data from the Canadian Survey on Working Conditions, this article provides a profile of workers aged 15 to 69 who used artificial intelligence (AI) and automation technologies at work during the previous year. The article focuses on generative AI which refers to tools trained on large datasets that are used to create new content and to support tasks such as answering questions and problem-solving. Examples of Generative AI tools include ChatGPT and Google Gemini.
    Release date: 2026-06-17
  • 3. Canadian Active Living Environments 2.0: Development of an open-source pipeline for the replication and extension of the Canadian Active Living Environments measure
    Articles and reports: 82-003-X202600600001
    Description: The Canadian Active Living Environments (Can-ALE) project was developed in 2019 to provide a standardized, pan-Canadian indicator of how supportive neighbourhood built environments are for physical activity and active transportation, enabling comparisons across places and over time. Can-ALE 1.0 produced measures for the 2006 and 2016 census years, but it did not include 2011 or 2021. As well, the data and processing steps were not packaged in a fully reproducible format, limiting longitudinal analyses and replication. In this study, the original measure was replicated and extended by developing Can-ALE 2.0, an open-source, reproducible R-based workflow to generate Can-ALE metrics for the 2011, 2016, and 2021 census years.
    Release date: 2026-06-17
  • 4. Patient experiences with virtual health care in Canada: Modes of delivery and satisfaction with care
    Articles and reports: 82-003-X202600600002
    Description: The COVID-19 pandemic expanded virtual care through telephone, video, and digital communication, with usage patterns varying by patients’ sociodemographic and health characteristics. Continued virtual care use after the pandemic highlights the need for updated information on modality choice and patient satisfaction. This study used data from the 2023 Canadian Social Survey – Quality of Life, Virtual Health Care and Trust, to estimate the distribution of virtual care modes by provider type, positive and negative aspects of patients’ last virtual appointment, and satisfaction levels.
    Release date: 2026-06-17
  • 5. Population estimates, quarterly
    Table: 17-10-0009-01
    Geography: Canada, Province or territory
    Frequency: Quarterly
    Description: Estimated number of persons by quarter of a year and by year, Canada, provinces and territories.
    Release date: 2026-06-17
  • 6. Estimates of the components of interprovincial migration, quarterly
    Table: 17-10-0020-01
    Geography: Canada, Province or territory
    Frequency: Quarterly
    Description: Components of interprovincial migratory increase, quarterly: in- and out- interprovincial migrants./Subjects modified by client request - ME 37/2019
    Release date: 2026-06-17
  • 7. Estimates of the components of international migration, quarterly
    Table: 17-10-0040-01
    Geography: Canada, Province or territory
    Frequency: Quarterly
    Description: Components of international migratory increase, quarterly: immigrants, emigrants, returning emigrants, net temporary emigrants, net non-permanent residents.
    Release date: 2026-06-17
  • 8. Estimates of interprovincial migrants by province or territory of origin and destination, quarterly
    Table: 17-10-0045-01
    Geography: Province or territory
    Frequency: Quarterly
    Description: Quarterly number of interprovincial migrants by province of origin and destination, Canada, provinces and territories.
    Release date: 2026-06-17
  • 9. Estimates of the components of natural increase, quarterly
    Table: 17-10-0059-01
    Geography: Canada, Province or territory
    Frequency: Quarterly
    Description: Components of natural increase, quarterly: births and deaths.
    Release date: 2026-06-17
  • 10. Estimates of the number of non-permanent residents by type, quarterly
    Table: 17-10-0121-01
    Geography: Canada, Province or territory
    Frequency: Quarterly
    Description: This table provides quarterly estimates of the number of non-permanent residents by type for Canada, provinces and territories.
    Release date: 2026-06-17
Data (13,287)

Data (13,287) (60 to 70 of 13,287 results)

Analysis (10,783)

Analysis (10,783) (10,720 to 10,730 of 10,783 results)

  • 10,721. Non-response in the Canadian Labour Force Survey Archived
    Articles and reports: 12-001-X197900100002
    Description: This paper includes a description of interviewer techniques and procedures used to minimize non-response, an outline of methods used to monitor and control non-response, and a discussion of how non-respondents are treated in the data processing and estimation stages of the Canadian Labour Force Survey. Recent non-response rates as well as data on the characteristics of non-respondents are also given. It is concluded that a yearly non-response rate of approximately 5 percent is probably the best that can be achieved in the Labour Force Survey.
    Release date: 1979-06-15
  • 10,722. An empirical investigation of an improved method of measuring correlated response variance Archived
    Articles and reports: 12-001-X197900100003
    Description: Two methods for estimating the correlated response variance of a survey estimator are studied by way of both theoretical comparison and empirical investigation. The variance of these estimators is discussed and the effects of outliers examined. Finally, an improved estimator is developed and evaluated.
    Release date: 1979-06-15
  • 10,723. Selecting a sample of size n with PPSWOR from a finite population Archived
    Articles and reports: 12-001-X197900100004
    Description: Let U = {1, 2, …, i, …, N} be a finite population of N identifiable units. A known “size measure” x_i is associated with unit i; i = 1, 2, ..., N. A sampling procedure for selecting a sample of size n (2 < n < N) with probability proportional to size (PPS) and without replacement (WOR) from the population is proposed. With this method, the inclusion probability is proportional to size (IPPS) for each unit in the population.
    Release date: 1979-06-15
  • 10,724. On the inclusion of large units in simple random sampling Archived
    Articles and reports: 12-001-X197900100005
    Description: Approximate cutoff rules for stratifying a population into a take-all and take-some universe have been given by Dalenius (1950) and Glasser (1962). They expressed the cutoff value (that value which delineates the boundary of the take-all and take-some) as a function of the mean, the sampling weight and the population variance. Their cutoff values were derived on the assumption that a single random sample of size n was to be drawn without replacement from the population of size N.

    In the present context, exact and approximate cutoff rules have been worked out for a similar situation. Rather than providing the sample size of the sample, the precision (coefficient of variation) is given. Note that in many sampling situations, the sampler is given a set of objectives in terms of reliability and not sample size. The result is particularly useful for determining the take-all - take-some boundary for samples drawn from a known population. The procedure is also extended to ratio estimation.
    Release date: 1979-06-15
  • 10,725. Unbiased estimation of proportions under sequential sampling Archived
    Articles and reports: 12-001-X197900100006
    Description: Under a sequential sampling plan, the proportion defective in the sample is generally a biased estimator of the population value. In this paper, an unbiased estimator is given. Also, an unbiased estimator of its variance is derived. These results are applied to an estimation problem from the 1976 Canadian Census.
    Release date: 1979-06-15
  • 10,726. The application of a systematic method of automatic edit and imputation to the 1976 Canadian Census of Population and Housing Archived
    Articles and reports: 12-001-X197800254832
    Description: I.P. Fellegi and D. Holt proposed a systematic approach to automatic edit and imputation. An implementation of this proposal was a Generalized Edit and Imputation System by the Hot-Deck Approach, that was utilized in the edit and imputation of the 1976 Canadian Census of Population and Housing. This paper discusses that application, evaluating the strengths and weaknesses of the methodology with some empirical evidence. The system will be considered in relation to the general issues of the edit and imputation of survey data. Some directions for future developments will also be considered.
    Release date: 1978-12-15
  • 10,727. Large scale imputation of survey data Archived
    Articles and reports: 12-001-X197800254833
    Description: Owners of small businesses complain about the quantity of forms they are required to collectors of statistics. Administrative data are an alternative source but do not usually include all the information required by the survey takers.

    The “Tax Data Imputation System” makes use of tax data collected from a large number of businesses by Revenue Canada and data obtained by sample survey for a small subset of these businesses. Survey data is imputed (estimated) for all the businesses not actually surveyed using a “hot-deck” technique, with adjustments made to ensure certain edit rules are satisfied. The results of a simulation study suggest that this procedure has reasonable statistical properties. Estimators (of means or totals) are unbiased with variances of comparable size to the corresponding ratio estimators.
    Release date: 1978-12-15
  • 10,728. Some methods for updating sample survey frames and their effects on estimation Archived
    Articles and reports: 12-001-X197800254834
    Description: Frames designed for continuous surveys are sometimes used for ad hoc surveys which require selection of sampling units separate from those selected for the continuous survey. This paper presents an unbiased extension of Keyfitz’s (1951) sample updating method to the case where a portion of the frame has been reserved for surveys other than the main continuous survey. A simple although biased alternative is presented.

    The scope under Platek and Singh’s (1975) design strategy for an area based continuous survey requiring updating is then expanded to encompass rotation of first stage units, establishment of a separate special survey sub-frame, and procedures to prevent re-selection of ultimate sampling units.

    The methods are evaluated in a Monte Carlo study using Census data to simulate the design for the Canadian Labour Force Survey.
    Release date: 1978-12-15
  • 10,729. Alternative estimators in PPS sampling Archived
    Articles and reports: 12-001-X197800254835
    Description: Some estimators alternative to the usual PPS estimator are suggested in this paper for situations where the size measure used for PPS sampling is not correlated with the study variable and where data are available on another supplementary variable (size measure). Properties of these estimators are studied under super-population models and also empirically.
    Release date: 1978-12-15
  • 10,730. Non-response and imputation Archived
    Articles and reports: 12-001-X197800254830
    Description: The problems of dealing with non-response at various stages of survey planning are discussed with implications for the mean square error, practicality and possible advantages and disadvantages. Conceptual issues of editing and imputation are also considered with regard to complexity and levels of imputation. The methods of imputation include weighting, duplication, and substitution of historical records. The paper includes some methodology on the bias and variance.
    Release date: 1978-12-15
Reference (2,029)

Reference (2,029) (50 to 60 of 2,029 results)

  • 51. Content changes for the 2026 Census of Population: Population group
    Surveys and statistical programs – Documentation: 98-20-00042026010
    Description: This fact sheet offers a summary of content changes for the 2026 Census specific to the question on population group. The tested changes are explained, along with the resulting approach for 2026.
    Release date: 2025-07-04
  • 52. Report on content changes for the 2026 Census of Population: General health
    Surveys and statistical programs – Documentation: 98-20-00052026001
    Description: This report outlines the steps taken to develop a new question on general health for the 2026 Census of Population questionnaire.
    Release date: 2025-07-04
  • 53. Report on content changes for the 2026 Census of Population: Homelessness
    Surveys and statistical programs – Documentation: 98-20-00052026002
    Description: This report outlines the steps taken to develop new questions capturing data about homelessness for the 2026 Census of Population questionnaire.
    Release date: 2025-07-04
  • 54. Report on content changes for the 2026 Census of Population: Sexual orientation
    Surveys and statistical programs – Documentation: 98-20-00052026003
    Description: This report outlines the steps taken to develop a new question capturing data on sexual orientation for the 2026 Census of Population questionnaire.
    Release date: 2025-07-04
  • 55. 2024 Census Test: Design and methodology of the content test
    Surveys and statistical programs – Documentation: 98-20-00052026004
    Description: This report provides detailed insight into the design and methodology of the content test component of the 2024 Census Test. This test evaluated changes to the wording and flow of some questions, as well as the potential addition of new questions, to help determine the content of the 2026 Census of Population.
    Release date: 2025-07-04
  • 56. Census of Agriculture: Changes to the questionnaire
    Surveys and statistical programs – Documentation: 32-26-0008
    Description: This report describes the main changes, additions or deletions to the Census of Agriculture questionnaire by topic and in the order they appear on the questionnaire.
    Release date: 2025-07-04
  • 57. User Guide and Data Dictionary for the Dataset on Confirmed Cases of COVID-19
    Surveys and statistical programs – Documentation: 13-26-0002
    Description: Created in collaboration with the Public Health Agency of Canada (PHAC), this user guide with appended data dictionary provides Canadians and researchers with required information to be able to utilize the Detailed preliminary information on confirmed cases of COVID-19 (Revised) table.

    The user guide with appended data dictionary describes background information of COVID-19 as well as objectives, coverage, content, limitations and data quality concerns of the table.

    Release date: 2025-07-02
  • 58. Canadian Census Health and Environment Cohort: User Guide
    Surveys and statistical programs – Documentation: 13-26-0005
    Description: The Canadian Census Health and Environment Cohorts (CanCHECs) are a series of population-based microdata linkages. The CanCHECs combine census respondents to the long-form questionnaire with administrative health data and annual postal codes for mailing addresses. These data can be used to examine health outcomes by population characteristics measured by the census long-form sample data. This user guide has been created to help potential data users, including researchers and academics, public health officials, government agencies, the private sector, and non-governmental organizations.
    Release date: 2025-06-18
  • 59. Census Subdivision Boundary File, Reference Guide
    Geographic files and documentation: 92-162-G
    Description: This reference guide is intended for users of the Census Subdivisions Boundary File. The guide provides an overview of the file, the general methodology used to create it, and important technical information for users.
    Release date: 2025-06-18
  • 60. Census Subdivision Boundary File
    Geographic files and documentation: 92-162-X
    Description: The Census Subdivision Boundary File contains the boundaries of all census subdivisions which combined cover all of Canada. A census subdivision is a municipality or an area treated as an equivalent to a municipality for statistical purposes (for example, unorganized territories). The file provides a framework for mapping and spatial analysis using commercially available geographic information systems (GIS) or other mapping software.

    The Census Subdivision Boundary File is portrayed in Lambert conformal conic projection and is based on the North American Datum of 1983 (NAD83). A reference guide is available (92-162-G).

    Release date: 2025-06-18

Sort Help

How are the results ordered?

The Sort by feature provides four options:

  • By date – sorts results by product release date starting with the most recent.
  • By most popular – gives priority to results that are most frequently selected by users, followed by the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Sort Help

How are the results ordered?

The Sort by feature provides three options:

  • By date – sorts results by product release date starting with the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Search Help

How do I use the filters and the search box?

  • You can initiate a search by entering keywords or selecting filters (e.g., under Subject, Geography, etc.) on the left side of the page.

  • Filters can be used together or in any combination. Each time you select a filter, the results on the page are updated.

  • To start a new search, click on the Clear all button above the search box or deselect each filter.

  • Specified keywords and filters appear above the search box. You can deselect any or all the tags to refine or clear your search.

How do I refine my search?

  • You can enter keywords in the search box. It is not necessary to use “+” or “, “ or “AND”.

  • You can delete some or all of the keywords from your search string.

  • Quotes around keywords limit the search to a specific phrase.

    • For example, “labour force survey” will limit results to products containing this phrase.

  • Use “or” between keywords to obtain results that contain one or more search terms.

    • For example, labour or­ force or survey will limit results to products containing any or all of these words.

How does the search work?

  • This search looks for results that have your query term in the title, description, subject, geography, product number or other information about the product.

    • For example, when searching the term ‘Diseases’, all results with the word ‘Diseases’ in the title, description or tagged the subject appear.

  • The text within an article or publication are not searched. For full text searching of articles, use the site search.

Date modified: