Keyword search

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (22 items: Prince Edward Island; Canada; Newfoundland and Labrador; Atlantic provinces ...), Housing estimates (3 items: Housing starts; Housing completions; Housing under construction ...), Type of unit (6 items: Total units; Semi-detached units; Row units; Single-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (86 items: Nova Scotia; Prince Edward Island; Canada; Newfoundland and Labrador ...), Type of dwelling unit (5 items: Total units; Row units; Single units; Semi-detached units ...), Type of market (5 items: Homeowner; Rental; Condo; Co-op ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (37 items: Census metropolitan areas; Abbotsford-Mission, British Columbia; Barrie, Ontario; Brantford, Ontario; ...);  Completed dwelling units (2 items: Absorptions; Unabsorbed inventory);  Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (38 items: All census agglomerations 50;000 and over; Barrie; Ontario; Belleville; Ontario; Abbotsford-Mission; British Columbia ...), Completed dwelling units (2 items: Absorptions; Unabsorbed inventory ...), Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (11 items: Nova Scotia; Prince Edward Island; Newfoundland and Labrador; Canada ...), Housing estimates (3 items: Housing starts; Housing under construction; Housing completions ...), Type of unit (5 items: Total units; Single-detached units; Row units; Semi-detached units ...).

Description:

This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

Description: The Public-Use Microdata File (PUMF) for the Survey of Household Spending (SHS) provides information on household expenditures as well as selected information on dwelling characteristics and household equipment. The production of this file includes many safeguards to prevent the identification of any one person or household.

PUMFs were produced on an annual basis for SHS 1997 to 2009, before a redesigned survey was introduced with the 2010 reference year. The SHS 2017 PUMF is the first SHS PUMF based on data collected after the 2010 survey redesign.

Due to changes to data collection, processing and estimation methods introduced with the 2010 redesign, users are advised not to compare data from SHS 1997 to 2009 with data from any subsequent years, unless otherwise noted.

Description: Basket weights of major components, gasoline, and selected special aggregates of the Consumer Price Index (CPI) basket, for Canada, provinces, Whitehorse, Yellowknife and Iqaluit, last 5 years of the CPI basket. Includes price period of the weights as either weights at basket link month prices or weights at basket reference period prices. Weights are shown in percentage terms.

Description: Basket weights of the all-items Consumer Price Index (CPI) basket, for Canada, provinces, Whitehorse, Yellowknife and Iqaluit, last 5 years of the CIP basket. Includes price period of the weights as either weights at basket link month prices or weights at basket reference period prices. Weights are shown in percentage terms.

Description:

Wholesale sales, price and volume, for Canada, includes all members under North American Industry Classification System. Data are seasonally adjusted, available on a monthly basis in dollars x 1,000,000.

Description:

Wholesale sales, price and volume for motor vehicle and parts merchant wholesalers. Data are seasonally adjusted, available for Canada on a monthly basis in dollars x 1,000,000.

Description:

Wholesale trade sales, available for all members under North American Industry Classification System (NAICS) and adjustments dimensions, available monthly, for Canada, provinces and territories, in dollars X 1,000.

Description:

Wholesale trade sales for motor vehicle and parts merchant wholesalers. Seasonally adjusted and unadjusted data are available on a monthly basis for Canada, provinces and territories, in dollars X 1,000.

Description:

Wholesale trade inventories, available for all members under adjustments and North American Industry Classification System (NAICS) dimensions, available on a monthly basis, for Canada, in dollars x 1,000.

Description:

Wholesale trade inventories for motor vehicle and parts merchant wholesalers. Seasonally adjusted and unadjusted data are available on a monthly basis for Canada, in dollars x 1,000.

Description: Owners of small businesses complain about the quantity of forms they are required to collectors of statistics. Administrative data are an alternative source but do not usually include all the information required by the survey takers.

The “Tax Data Imputation System” makes use of tax data collected from a large number of businesses by Revenue Canada and data obtained by sample survey for a small subset of these businesses. Survey data is imputed (estimated) for all the businesses not actually surveyed using a “hot-deck” technique, with adjustments made to ensure certain edit rules are satisfied. The results of a simulation study suggest that this procedure has reasonable statistical properties. Estimators (of means or totals) are unbiased with variances of comparable size to the corresponding ratio estimators.

Description: Frames designed for continuous surveys are sometimes used for ad hoc surveys which require selection of sampling units separate from those selected for the continuous survey. This paper presents an unbiased extension of Keyfitz’s (1951) sample updating method to the case where a portion of the frame has been reserved for surveys other than the main continuous survey. A simple although biased alternative is presented.

The scope under Platek and Singh’s (1975) design strategy for an area based continuous survey requiring updating is then expanded to encompass rotation of first stage units, establishment of a separate special survey sub-frame, and procedures to prevent re-selection of ultimate sampling units.

The methods are evaluated in a Monte Carlo study using Census data to simulate the design for the Canadian Labour Force Survey.

Description: Some estimators alternative to the usual PPS estimator are suggested in this paper for situations where the size measure used for PPS sampling is not correlated with the study variable and where data are available on another supplementary variable (size measure). Properties of these estimators are studied under super-population models and also empirically.

Description: The problems of dealing with non-response at various stages of survey planning are discussed with implications for the mean square error, practicality and possible advantages and disadvantages. Conceptual issues of editing and imputation are also considered with regard to complexity and levels of imputation. The methods of imputation include weighting, duplication, and substitution of historical records. The paper includes some methodology on the bias and variance.

Description:

A chronological account of the development of Canada’s central statistical agency is presented in this paper with emphasis on the importance of adapting the organization to the demands of the times.

Description: When a two-stage sample is used to collect data, the correlations between the sampled units make the ?2 test of independence invalid. Use of the ordinary ?2 tables generally results in a test which is greater than the desired level of significance. The effect of the sample design comes from two main areas: the sample size within PSU’s and the degree to which the characteristics are independent within each PSU. The effect of the sample size within PSU’s is greatest when there is no independence within each PSU, and diminishes as the degree of independence increases.

Description: The impact on linear statistics of the sample design used in obtaining survey data is the subject of much of sampling literature. Recently, more attention has been paid to the design’s impact on non-linear statistics; the major factor inhibiting these investigations has been the problem of estimating at least the first two moments of such statistics. The present article examines the problem of estimating the variances of non-linear statistics from complex samples, in the light of existing literature. The behaviour of the chi-square statistic computed from a complex sample to test hypotheses of goodness of fit or independence is studied. Alternative tests are developed and their properties studied in simulation experiments.

Description: This paper describes a survey design established to measure truck commodity flows in Peru. The article addresses the conceptual and operational features of the survey design as well as describing its elements and implementation techniques in the context of a pilot project. Finally, the paper illustrates how the results of this pilot might be used to design and implement a full-scale national survey.

Description: The total variance of a survey estimate incorporates sampling variance, simple response variance and correlated response variance. The last component reflects the part of the total variance due to a common influence on a group of respondents. In the Canadian census, self-enumeration was adopted as the standard method of enumeration in the 1971 Census. One factor in favor of introducing this method was evidence, from the 1961 Census, that correlated response variance made an important contribution to the total variance of census estimates. Based on a study conducted using interpenetration of interviewers, this article compares correlated response variances from the 1961, 1971 and 1976 Censuses. The empirical results demonstrate that although the self-enumeration adopted in the 1971 Census did not completely remove the correlated response variance, this approach has considerably reduced the magnitude of this component of variance for almost all the characteristics examined.

Description: This article presents the findings of an experimental design set up to study the variation in refusal rates to the different modules of the physical measures component of the Canada Health Survey. The study indicated that interviewer teams have a significant impact on refusal rates. Also, a large proportion of the refusals was due to total family refusals rather than individual refusals within responding families.

Description: The Canadian Census Health and Environment Cohorts (CanCHECs) enable the creation of population-based linked data sets. The CanCHECs combine census respondents to the long-form questionnaire with administrative health data and annual postal codes for mailing addresses. These data can be used to examine health outcomes by population characteristics measured by the census long-form sample data or the National Household Survey data.

Description: The Infrastructure Economic Account isolates the role and estimates the impact of infrastructure on Canada, the provinces and the territories. It provides a macroeconomic perspective of the infrastructure assets that represent the physical structures and systems that support the production of goods and services and their delivery to and consumption by governments, businesses and citizens.

Description: This program produces experimental estimates on the asking rent of available rental units listed on major rental platforms in Canada to provide a detailed and up-to-date portrait of rental market prices in Canadian CMAs. These statistics cover apartments by number of bedrooms and single rooms available for rent.

Description: A novel index for estimating the expense of housing and transportation in Canada has been developed, based on the Center for Neighborhood Technology’s Housing + Transportation (H+T®) Affordability Index. By combining Census data and data from other statistical programs, we obtain a composite index (the H+T Index) for all Aggregate Dissemination Areas of Canada, except for Territories and First Nations.

Description: The Canadian indexes of social resilience and vulnerability were created to provide area-based information on resilience and vulnerability to natural hazards and disasters across Canada.

Description: The Canadian Child Care Worker Survey (CCCWS), sponsored by Employment and Social Development Canada, collects information from centre-based child care workers on factors related to the workplace and staff well-being.

Description: The Natural Resources Satellite Account - Critical Minerals Extension (NRSA-CME) aims to provide estimates of nominal output, real and nominal GDP, and jobs associated with the production of critical minerals in Canada.

Description: This statistical program develops a set of population projections by age and gender for Canadian communities, as defined by the statistical concepts of census divisions (CD) and census subdivisions (CSD).

Description: This product provides a harmonized Canada-wide open dataset of cycling infrastructure. The Data Exploration and Integration Lab (DEIL) compiled data from open data sources, validated, and standardized these to the The Canadian Bikeway Comfort and Safety (CAN-BICS) classification system. The dataset can be used for research, planning, policy and official statistics.