Keyword search

Description: Data are presented at the national level, by fuel type (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description: Data are presented at the national level by fuel type in gigajoules (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description: Chemicals and synthetic resins products annual production, data in tonnes.

Description:

Measurements of the production of asphalt roofing materials, as well as the shipments of these products, across Canada and exports.

Description: The purpose of this research paper is to highlight the impact of the many challenges faced over time by the sawmill industry on its development and its role as an economic lever for many Canadian communities.

Description:

This infographic looks at the impact the pandemic and supply chain disruptions have had on manufacturing in Canada. Specific data that is collected by the Monthly Survey of Manufacturing is shown on the infographic to help highlight the impacts.

Description:

Demand, consumption, expected procurement, manufacturing production, manufacturing capacity and distribution of personal protective equipment (PPE) by Canadian businesses by North American Industry Classification System (NAICS) for Canada and regions.

Description:

Number of businesses needing, not needing, don’t know if they need personal protection equipment (PPE), number of employees, average percentage of full-time employees by North American Industry Classification System (NAICS) for Canada and regions. Information on number of manufacturers and distributors of PPE for Canada and regions is also available.

Description:

The federal government offers business innovation and growth support through program streams managed by its departments and agencies. In 2017, enterprises in the manufacturing sector accounted for almost one-quarter of the beneficiaries of this support and received almost one-third of the total value of support (Statistics Canada, 2020). The objective of this analysis is to assess the impact of federal growth and innovation support on the employment and revenue of beneficiary enterprises in the manufacturing sector between 2007 and 2017. This analysis suggests that enterprises that received federal support for growth and innovation experienced stronger employment and revenue growth relative to non-beneficiary enterprises. Over the three years following receipt of support, employment growth for beneficiary enterprises averaged 1.8% per year while, on average, enterprises that did not receive support experienced employment declines. Over the same period, the average annual revenue growth of beneficiary enterprises was higher than that of non-beneficiary enterprises by 4.6 percentage points.

Description: This infographic features sales and inventories for the petroleum and coal products industry, as well as refinery production, while highlighting the impacts related to the COVID-19 pandemic.

Description:

This table presents different variables for a dozen of products from the mining industry such as diamonds, clay, gypsum, lime, potash, salt, etc. The variables available in this table are the quantity produced, the quantity shipped and the value of shipments. The data are published at the national, provincial and territorial levels.

Description:

This table presents the value of shipments for multiple mining industry products such as cobalt, gold, iron, lead, platinum, titanium, zinc, diamonds, etc. The data are published at the national, provincial and territorial levels.

Description:

Value of shipments of critical minerals, as defined by the Critical Minerals Centre of Excellence (CMCE) at Natural Resources Canada.

Description: This table provides manufacturing sales data based on origin, destination and industry cross-tabulations from the Annual Survey of Manufacturing and Logging. Origins include all provinces and territories. Destinations include all provinces and territories, the United States of America, and the rest of the world. Industry detail is available at the 2, 3 and 4 digit NAICS level.

Description: This table contains principal statistics for the Canadian mineral industries which include metal ore mining and non-metallic mineral mining and quarrying. The table includes data on revenue and expenses, number of employees as well as opening and closing inventories.

Description: This table contains principal statistics for the Canadian mineral industries which include metal ore mining and non-metallic mineral mining and quarrying. The table includes data on revenue and expenses, number of employees as well as opening and closing inventories.

Description: The industrial capacity utilization rate is the ratio of actual output to potential output. Data are published quarterly and cover all goods-producing industries, with the exception of the agriculture industry. The visualization model shows rates, quarterly changes, and year-over-year changes for manufacturing industries.

Description: Quarterly data, by North American Industry Classification System (NAICS).

Description: Data on fertilizer inventories such as ammonia, urea ammonium nitrate, ammonium sulphate, diammonium phosphate and other fertilizer products for the Eastern and Western provinces of Canada.

Description: Data on the production of fertilizer such as ammonia, urea ammonium nitrate, ammonium sulphate, diammonium phosphate and other fertilizer products for Canada.

Description:

The latest issue contains the article "Refined petroleum and coal products industries" by Randall Sheldrick. The Canadian economy has been on the rise for almost a decade. But, the economy suffered a modest set back in 1998 due to the effects of the Asian economic and financial market crisis. While most manufacturing industries continued to expand, resource-based industries such as refined petroleum were hard hit by a slump in commodity prices.

This document presents an overview of the Refined Petroleum Products Industry. Most of the findings are based on the Annual Survey of Manufactures (ASM). According to this survey the total value of shipments for the industry stalled at just over $21 billion in 1997. Despite the fact that the industry tends to be cyclical in nature, demand for refined petroleum products is expected to increase steadily into the next century.

Description:

The most recent issue contains the article "The beverage industries: two markets" by Peter Zylstra.This paper presents recent developments in the Beverage Industries. Following a brief introduction, the industry is analysed in terms of the four component sub-industries, which fall into two groups: soft drinks and alcoholic beverages. The two groups constitute different overall markets. The summary of recent developments is based on results of the 1997 Annual Survey of Manufactures (ASM). Other sources are used to provide industry environment and economic backgroun.

Description:

This article describes the changes to the logging industry and the demand for lumber, paper pulp and newsprint in 1997 and 1998, as well as more recent events.

Description:

This paper examines current expenditures on packaging products by manufacturing industries and outlines various trends observed since the start of the decade.

Description:

This research paper series publishes research pertaining to the logging industry based on data from the Annual Survey of Logging and Forestry and other surveys dealing with related topics. The purpose of those research papers is to disseminate general information on this sector of the Canadian economy.

Description:

This paper examines how several factors contribute to innovative activity in the Canadian manufacturing sector. First, it investigates the extent to which intellectual property right protection stimulates innovation. Second, it examines the contribution that R&D makes to innovation. Third, it considers the importance of various competencies in the area of marketing, human resource, technology and production to the innovation process. Fourth, it examines the extent to which a larger firm size and less competition serve to stimulate competition-the so-called Schumpeterian hypothesis. Fifth, the effect of the nationality of a firm on innovation is also investigated. Finally, the paper examines the effect of an industry's environment on a firm's ability to innovate.

Several findings are of note. First, the relationship between innovation and patent use is found to be much stronger going from innovation to patent use than from patent use to innovation. Firms that innovate take out patents; but firms and industries that make more intensive use of patents do not tend to produce more innovations. Second, while R&D is important, developing capabilities in other areas, such as technological competency and marketing, is also important. Third, size effects are significant. The largest firms tend to be more innovative. As for competition, intermediate levels of competition are the most conducive to innovation. Fourth, foreign-controlled firms are not significantly more likely to innovate than domestic-controlled firms once differences in competencies have been taken into account. Fifth, the scientific infrastructure provided by university research is a significant determinant of innovation.

Description:

This study uses data to study differences in labour productivity gains across domestic and foreign-controlled establishments in the manufacturing sector for the period 1973 to 1993. In doing so, it also examines the extent to which labour productivity differences exist between small and large establishments and across industry sectors and how they have been changing over time.

The analysis consists of three parts. In the first section, the connection between labour usage and output is examined. This analysis investigates differences in marginal labour propensities for the different subgroups in the short and long-run. Here volatility is seen to be lower for foreign-controlled establishments. The second section examines the difference between the growth in average labour productivity for the same groups. Here foreign-controlled establishments are seen to have the highest growth rates. The third section investigates whether any trend can be found in the rates of growth for large and small, domestic and foreign establishments and finds that these differences have been increasing over time.

Description:

In recent years, several economic forces have caused a change in the structure of the economy. Factors such as globalization and trade liberalization, among others, have intensified competition resulting in reallocation of resources among sectors in Canada. As business services, communications and wholesale trade emerged as engines of growth, it is generally perceived that the manufacturing industry has lost its significance. In contrast, a review of historical data on the Gross Domestic Product (GDP) show that the share of manufacturing output was slightly up, from 17.2% in 1961 to 17.8% in 1998.

This paper reflects upon the importance of manufacturing in the economy and focuses on one industry - Primary Textiles. It concentrates on the evolution and significance of this industry within an overall changing economic structure using Statistics Canada's data base, CANSIM, results of the Annual Survey of Manufactures (1988 to 1997) along with current findings of the Monthly Survey of Manufacturing (1998 and 1999).

Description:

The latest issue consists of the article "Strong growth propels the electrical and electronic products industry into the 21st century" by Russell Kowaluk. Despite the recent turmoil in global stock markets, manufacturing in Canada is finally reaping the benefits of prosperity on many accounts, and such positive indicators are prevalent in one of Canada's more innovative, and dynamic industries, the electrical and electronic products industry (Major Group 33). Following a brief pause in 1996, the value of shipments surpassed the $30 billion mark in 1997. Employment levels recorded their strongest growth in ten years, while international trade estimates again achieved record highs.

This review paper highlights the results of the 1997 Annual Survey of Manufactures (ASM), and details various prevailing economic indicators, illustrating the growth in the electrical and electronic products industry. These factors will be highlighted and analyzed, and the electrical and electronic products sector will be compared to other industries and measured relative to the manufacturing sector as a whole. Key current indicators to be investigated include the value of shipments and costs of production, international trade and labor statistics.

Description:

The most recent issue contains "Non-Electrical machinery industries post strong growth in 1997, with market uncertainty on the horizon" by Russell Kowaluk. Based on statistical information provided by the Annual Survey of Manufactures (ASM), this article explores the machinery industries (except electrical machinery), discussing various key statistics including shipment value, input costs and labour information. Other significant economic indicators to be assessed include monthly manufacturing estimates, international trade statistics, and rates of capacity utilization and investment.

Canada's machinery industries remained one of the fastest growing manufacturing sectors in 1997. However, during the later half of 1998 and into 1999, recent developments confirm that the tide of prosperity the industry has benefited from in recent years has tapered off. The ensuing article discusses the industry, detailing the results of the 1997 ASM, and highlighting the economic climate now challenging the sector.

Description: The objective of this survey is to collect new statistical information on the nature and extent of product, process, marketing and organizational innovations in the Canadian food processing industry and on other emerging issues in the food processing industry;

Description: The survey produces statistics on shipments of fertilizer in Canada by manufacturers, wholesale distributors and major retailers.

Description: The Survey of Industrial Processes (SIP) is an industry-specific business survey focusing on small- and medium-sized enterprises (SMEs). It is designed to link economic data with industrial processes and environmental outcomes. The SIP collects data on operational activities and engineering processes of industrial, manufacturing, and service oriented establishments.

Description: This survey collects sales (end-use) information for light fuel oil from all refineries and major distributors in Canada.

Description: Information from this survey is used for market analysis, industrial and regional development, establishing trade and tariff policies, and managing natural resources.

Description: The Annual Mineral Production Survey is a survey of the mining industry in Canada. It is intended to cover all establishments primarily engaged in mining or quarrying activities as well as establishments engaged in secondary business activity linked to the mining sector. Data collected from businesses are aggregated with information from other sources to produce official estimates at the national and provincial level.

Description: The Monthly Mineral Production Survey provides information on the performance of the mining sector in Canada. This survey presents estimates on monthly production and inventories of products such as metallic and non-metallic minerals as well as aggregates and refractory minerals.

Description: The survey collects information related to the purchase, production, and sale of goods abroad by Canadian businesses. It also gathers information on whether Canadian businesses perform manufacturing or processing work for other Canadian or foreign clients, and whether Canadian businesses hire other Canadian or foreign firms to perform the same type of work.

Description: The Annual Mineral Production Survey - Preliminary Estimates is a survey of the mining industry in Canada. It is intended to cover establishments primarily engaged in mining or quarrying activities as well as establishments engaged in secondary business activity explicitly linked to the mining sector. Data collected from businesses are aggregated with information from other sources to produce official estimates of national and provincial production for these activities.

Description: This is non-Statistics Canada information.