Keyword search

Description:

This study examines businesses' demand for personal protective equipment, and concerns about lack of supply, using new data for October 2020 from the Personal Protective Equipment Survey.

Description: This report is a product of the Pan-Canadian Education Indicators Program (PCEIP). It is intended to facilitate the comparison of educational systems in Canada's provinces and territories with those of countries that belong to the Organisation for Economic Co-operation and Development (OECD). The document presents a series of indicators harmonized to the definitions and methodologies used by the OECD in Education at a Glance. The indicators are designed to serve as a basis for decision making and for development of programs in the field of education.

PCEIP is an ongoing initiative of the Canadian Education Statistics Council: a partnership between Statistics Canada and the Council of Ministers of Education, Canada, that provides a set of statistical measures on education systems.

Description:

This report presents statistics on airline traffic such as the volume of passengers and cargo at Canadian airports.

Description:

This article describes the revisions to the Financial Flow Accounts (FFA), the Other Changes in Assets Account (OCAA), and the National Balance Sheet Accounts (NBSA), collectively referred to as the Financial and Wealth Accounts (FWA), introduced as part of the 2020 Comprehensive Revision. These accounts are an integral part of the Canadian System of Macroeconomic Accounts (CSMA). This exercise was conducted to strengthen the overall quality and relevance of the FWA program and to introduce new concepts, methodologies, and classifications as recommended by international standards.

Description:

In this follow up QGIS tutorial on geoprocessing tools, we’ll use the Dissolve and Aggregate tools with the riparian land-cover layer to examine the distribution of different land-cover classes over the entire clip area and by specific watershed respectively.

Description:

This QGIS tutorial provides an introduction to raster datasets, covering procedures for processing, exporting and visualizing these datasets – demonstrated with the single-band Digital Elevation Model (DEM) rasters downloaded from Open Maps.

Description:

In this follow-up QGIS tutorial on raster data we’ll explore common tools and derivatives of Digital Elevation Models (DEMs) and show how to use the Raster Calculator to select and combine rasters.

Description:

Ever wanted to create your own maps, or integrate and visualize datasets to examine changes between locations and over time, or assess relations between variables? Geographic Information Systems (GIS) are the go-to programs for processing, integrating and visualizing spatial data, and conveying information in a widely-accessible and intuitive format. Follow along with these tutorials and learn the key concepts and procedures for performing common GIS tasks - such as creating maps, joining and overlaying datasets, and examining spatial variations.

Description:

This study of data from the Distributions of Household Economic Accounts compares households' economic well-being from a macro-economic accounts perspective, as measured by net saving and net worth for each generation when the major income earner for a household in one generation reached the same point in the life cycle as the major income earner for a household in another generation. The study finds that while younger generations have higher disposable income and higher consumption expenditure than older generations when they reached the same age, their net saving is relatively similar. As well, younger generations' economic well-being may be more at risk due to the COVID-19 pandemic since they depend more on employment as a primary source of income, they have higher debt relative to income, and they have less equity in financial and real estate assets from which to draw upon when needed.

Description:

Apprenticeship training is the key pathway for an individual to become a skilled tradesperson in Canada. This study uses data from the Education and Labour Market Longitudinal Platform from 2008 to 2016 to examine which factors affect the certification rates of registered apprentices in Canada, including the impact of employment conditions during on-the-job training.

Description: This report is a product of the Pan-Canadian Education Indicators Program (PCEIP). It is intended to facilitate the comparison of educational systems in Canada's provinces and territories with those of countries that belong to the Organisation for Economic Co-operation and Development (OECD). The document presents a series of indicators harmonized to the definitions and methodologies used by the OECD in Education at a Glance. The indicators are designed to serve as a basis for decision making and for development of programs in the field of education.

PCEIP is an ongoing initiative of the Canadian Education Statistics Council: a partnership between Statistics Canada and the Council of Ministers of Education, Canada, that provides a set of statistical measures on education systems.

Description:

This interactive data visualization tool features characteristics of students enrolled in, or graduating from, postsecondary programs offered in public postsecondary institutions in Canada (such as gender and status of student in Canada). It also provides an overview of program characteristics based on the International Standard Classification of Education (ISCED 2011) and on the Classification of Instructional Programs (CIP Canada 2016 cannabis variant) STEM/BHASE groupings.

Description: The Open Database of Cultural and Art Facilities (ODCAF) is a listing of cultural and art facilities across Canada. Facilities are classified in to one of the following nine types: art or cultural centre, festival site, gallery, heritage or historic site, library or archive, museum, theatre/performance and concert hall, and miscellaneous.

The listing contains the names, addresses, and geo coordinates of facilities, as well as the facility type as assigned in the data source. The ODCAF is based on data from authoritative sources that include among them provincial, territorial and municipal governments, and professional associations.

The ODCAF is released as open data under the Open Government License - Canada and provided as a zipped comma-separated values (.csv) file.

Description: The Open Database of Healthcare Facilities (ODHF) is a listing of healthcare facilities across Canada. Facilities are classified into one of three types: ambulatory health care services, hospitals, and nursing and residential care facilities. The listing contains the names, addresses, and geo coordinates of facilities, as well as the facility type as assigned in the data source.

The ODHF is based on data from authoritative sources that include among them all levels of government and public health and professional healthcare bodies. The ODHF is released as open data under the Open Government License - Canada and provided as a zipped comma-separated values (.csv) file.

Description:

This product describes the similarities and differences between two sets of United Nations (UN) guidelines for greenhouse gas (GHG) emissions: the United Nations System of Environmental-Economic Accounts (SEEA) and the United Nations Framework Convention on Climate Change (UNFCCC). Statistics Canada's Greenhouse Gas Account is compiled based on the SEEA guidelines, while the National GHG Inventory is prepared by Environment and Climate Change Canada in accordance with the UNFCCC.

Description:

This product enhances the industrial detail available for the agricultural and agri-food manufacturing sector within the national accounting framework. This detail allows users to analyze the supply and use of products across a broader range of farming and processing activities as well as facilitate the comparison of economic relationships and impacts across more industries than is possible in the core supply and use tables.

Description:

The activity indicators draw from a variety of data sources to provide information on Canada's transportation system. The indicators are presented in a data table and are updated monthly.

Description:

The performance indicators draw from a variety of data sources to provide information on how Canada's transportation system is performing. The indicators are presented in a data table and are updated monthly.

Description:

An efficient and modern transportation system has always been key to supporting a strong and competitive economy, and improving Canadians' quality of life. The Transportation Data and Information Hub (TDIH) provides easy access to a comprehensive, timely and accessible source of multimodal transportation data and transportation system performance measures. The TDIH aims to facilitate discussions and foster collaboration among key stakeholders from both the public and private sectors. The goal of the TDIH is to identify synergies and efficiencies that support effective decision-making in Canada, and ensure that the transportation system continues to contribute towards building a strong economy.

Description:

This table presents selected indicators from the short form Census at the Census Metropolitan Areas and Census Agglomerations level.

Description:

Staying apart from their parents and grandparents has been one of the hardest adjustments that Canadians have had to deal with since the start of the COVID-19 pandemic, the older population being at greater risk of infection and death from this disease. For months, most of them followed the quarantine rules, by staying home and adapting their behaviours to the infectious nature of the COVID-19. While before the outbreak visiting with one's parents was a relatively simple decision, it has since become a more delicate one. Studies have attempted to assess the risk of the virus transmission based on the frequency of intergenerational in-person contacts before the physical distancing recommendations were implemented.

This infographic provides a snapshot of the frequency and the duration of visits between adult children and their parent(s) in Canada. The results refer to Canadians who were aged 25 to 64, who were not living with their parents, and who had at least one biological or adoptive parent alive at the time of the surveys.

Description:

This infographic provides a snapshot of the net worth of Canadian families by province and family type in 2019. In addition, there's a focus on the most common asset and debt holdings of families. This infographic uses data from the Survey of Financial Security.

Description:

This article contributes to a series studies of COVID-19 impact on Canadian industries, with focus on the Retail Services Price Index (RSPI). The study analyzes the movements of RSPI during 2020 pandemic by subsectors, including clothing stores, grocery stores, and electronic stores, etc. It also compares different responses of retail sectors during 2020 pandemic and during 2008-2009 recession. Based on the in-depth analysis, the article also provides an outlook of the price index trend for the year 2020.

Description:

The COVID-19 pandemic has had unprecedented impacts on many key aspects of life, such as health, social connections, mobility, employment and incomes. Life satisfaction provides the best available umbrella measure of the combined effects of these changes on the well-being of Canadians. Using population-representative samples from two Statistics Canada surveys, this study compares the life satisfaction of Canadians before and during the COVID-19 pandemic.

Description:

This Juristat article provides a statistical overview of adults and youth admitted to and released from custody and community supervision in Canada in 2018/2019. Analysis is presented at the national as well as the provincial and territorial levels. Average counts and the incarceration rates are presented. Admissions and the characteristics of adults and youth in the correctional system (such as age, sex and Aboriginal identity) are also discussed.

Description:

The COVID-19 pandemic has had unprecedented impacts on many key aspects of life, such as health, social connections, mobility, employment and incomes. Life satisfaction provides the best available umbrella measure of the combined effects of these changes on the well-being of Canadians. Using population-representative samples from the 2018 Canadian Community Health Survey and the June 2020 Canadian Perspectives Survey Series, this study uses these data to compare life satisfaction in Canada before and during the pandemic, drawing comparisons across the population as a whole and among different regions and demographic groups.

Description:

In the past, the Bank of Canada (the Bank) and Statistics Canada both produced aggregate measures of borrowing, or credit, for sectors of the Canadian economy. The Statistics Canada measures were on a quarterly basis as part of the National Balance Sheet Accounts (NBSA) whereas the Bank of Canada published monthly statistics. While both estimates are drawn from the same data sources and paint a similar picture of the indebtedness of Canadian households and non-financial businesses, some reconcilable differences existed in the aggregate measures. Starting in December 2020 Statistics Canada will be producing monthly estimates that will be integrated into the larger NBSA framework. This will provide users with a single and consistent set of monthly estimates that align with the internationally recognized national accounting principles detailed in the United Nations System of National Accounts This guide will serve as a review of the historical differences between each organization's credit aggregates, the conceptual and statistical changes that will occur as a result of the integration of monthly estimates within the NBSA, and a detailed overview of the methods that will be employed to estimate the outstanding credit debt of households and non-financial private corporations by lending sector.

Description:

Statistics Canada has undertaken a broad range of initiatives designed to understand the impacts of COVID-19 on Canadians. This research paper highlights experimental methods designed to measure the impact of the pandemic on month-by-month family income trends of Canadians long before detailed annual statistics become available. The approach integrates weekly earnings available from the Canadian Labour Force Survey (LFS) together with information specific to government transfers including special COVID-19 benefits collected through administrative data sources and imputation. The objective is to shed light on the impact of labour market disruptions on Canadians and their families and the extent to which emergency benefits introduced by the government offset these disruptions. This paper describes the data sources used, estimation strategies employed, initial results, limitations, and potential future developments.

Description:

This study assessed the association between household food insecurity and self-perceived mental health status and anxiety symptoms among Canadians in the early months of the COVID-19 pandemic.

Description:

This study quantified prevalence trends of annually reported major depressive episodes, anxiety disorders, and comorbid major depressive episodes and anxiety disorders among working-age Canadians by labour force status between 2000 and 2016.

Description:

The Guide to the Labour Force Survey contains a dictionary of concepts and definitions and covers topics such as survey methodology, data collection, data processing and data quality. It also contains information on products and services, sub-provincial geography descriptions as well as the survey questionnaire.

Description:

As of reference year 2018, the Annual Capital and Repair Expenditures Survey (CAPEX) has added additional content allowing to produce estimates of capital and repair expenditures on infrastructure assets. In addition to the existing content, the new questionnaire asks for a breakdown of expenditures by function (or purpose) as well as the source of funding of capital expenditures from government grants and subsidies.

This product will decribe the sources and methods used to produce capital and repair expenditure estimates specific to infrastructure assets by function.

Description:

This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this release are derived from integrating the Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data on earnings. Statistics Canada has derived a series of indicators on educational pathways and labour market outcomes for registered apprentices by select trades, cohorts of apprentices, by sex, for Canada, all provinces, the Atlantic region, and for grouped territories.

Description:

This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data products associated with this release are derived from integrating the longitudinal Registered Apprenticeship Information System (RAIS) 2008 to 2017 data with other administrative data. Statistics Canada has derived a series of indicators on the interprovicial movements of newly certified journeypersons by cohort size and selected trades, for Canada, all provinces and for grouped territories.

Description:

In this QGIS tutorial we’ll cover the available symbology styles and explore their application to text and numeric field types in visualizing vector layers. Follow along as we discuss principles, procedures, and applications of these styles to different fields and vector geometries (i.e. points, lines and polygons). We’ll begin with simple edits to the colour, outline and transparency of layers, prior to applying Categorized and Graduated styles to text and numeric fields, and then conclude with three additional styles available for point layers. For graduated symbologies, the influence of the distributions of values on the mode and break values used in visualization are discussed. Learn to create striking and dynamic visualizations of point geometries with the Point Cluster and Heat Map styles, showing changing point counts and densities with changes in scale and extent. Methods for applying and modifying additional colour ramps and presets are also shown. Apply these skills in developing your own logical and interpretable visualizations for layers relevant to your areas of work and expertise – a prerequisite to creating well-balanced and intuitive maps.

Description:

This QGIS tutorial introduces the Field Calculator, used to add or update fields within the attribute table and edit features. Like the Select by Expression tool, it uses expression syntax. Follow along as we use these tools in conjunction to select and edit large selections of features. Specifically, we’ll cover syntax for adding geometric measures such as area, length and XY coordinates, as well as creating and editing feature attributes in numeric and text fields – by adding a Class field and updating the speed_rest field (speed limits) in the CPRoads layer. Build upon the foundational skills for writing expressions covered in the previous demo – using these procedures to isolate and populate feature attributes in these fields. Ensure you apply the remaining expressions and save the edits (shown at the end of the video and below) to the CPRoads layer, for use in later tutorials (Demos #10 and 23-25). Extend these skills to add, edit and update fields and feature attributes in layers relevant to your own areas of work and expertise.

Description:

In this QGIS tutorial you’ll learn to create a new vector layer and delineate feature geometries. Follow along as we cover the parameters, procedures and tools to delineate your own custom geometries, add fields and populate feature attributes, as well as copy and modify geometries from other layers of interest. These procedures, demonstrated with a polygon vector, equally extend to creating point and line vector geometries. Additionally, learn to enable and disable non-default (e.g. Advanced Digitizing, Shape Digitizing and Snapping) toolbars within QGIS’s interface, and enable editing tools. Apply these skills in creating layers of interest, such as custom clip layer for an area of interest (AOI), land-cover files, or training data, when equivalent datasets does not exist – enabling you to delineate geometries and populate feature attributes that suit your needs.

We’ll use the AOI layer in upcoming tutorials to standardize the extent of layers for further processing and analysis, so be sure to follow along and save your edits at the end of the demo. Stay tuned for the next tutorial, where we’ll introduce tools to select features by their attributes – enabling you to isolate features by criteria, conditions and values of interest within fields of a vector layer’s attribute table.

In this demo, we’ll delineate features with the Add Polygon Feature tool and additional tools on the Shape Digitizing toolbar. The Add Feature tool is the most common and versatile means for creating new features of any geometry type and form, while the latter tools are exclusive to polygon and line vectors - helping rapidly add regular polygon features. The Advanced Digitizing Panel is applied to snap feature segments at specified angles, while the Snapping tool facilitates aligning the vertices or segments of created features to those of other features. Similarly, copying and pasting feature geometries can also ensure alignment of created features with those of interest in other layers.

Description:

This QGIS tutorial covers attribute-based selection tools, which are used to query, select and subset features in a vector layer by specific criteria, conditions or values of interest within fields of the attribute table. Follow along as we work through different examples using the Select by Value and Select by Expression tools. Learn to isolate features by multiple criteria of interest, use additional selection methods (e.g. add, remove, and select features from a selection) and apply the SQL-like syntax for constructing expressions. This syntax is used in various QGIS tools. We’ll cover foundational rules, and then demonstrate creating expressions and applying associated operators to isolate text and numeric feature attributes. Learn to use wildcard characters and multiple fields in selecting features, as well as procedures for subsetting and exporting selected features to a new layer. You can then extend these skills in selecting and subsetting features by attributes in vector layers relevant to your own areas of work and expertise. We’ll continue building upon these skills in subsequent tutorials, including the next tutorial where we’ll use the Field Calculator and expression syntax to add new fields and edit feature attributes storing spatial measures, numbers and text characters.

Description:

In this introductory tutorial we'll discuss what geographic information systems (GIS) are, their applications, and potential uses in your own areas of work and expertise. We'll briefly discuss and download QGIS - an open-source program - which can be used to perform common GIS tasks, such as combining, analyzing and visualizing spatial data. These QGIS tutorials are created for new GIS users - with no formal training or experience using GIS. We'll start with foundational concepts and skills, and build towards more advanced topics. You can then extend these skills to datasets of thematic relevance to you in addressing common challenges and tasks.

Description:

This tutorial covers the main categories and sub-types of spatial data used in GIS, as well as three properties that make datasets spatial: map projections, datums and coordinate reference systems. We’ll also discuss the distinguishing characteristics and applications of vector and raster data, as well as their associated sub-types (vector: points, lines and polygons, raster: singleband, composite and thematic) and common file formats. This understanding will provide the necessary skills to navigate online geospatial archives, such as Canada’s Open Maps, and download relevant datasets in the optimal format for your intended use – which we’ll cover in Part II of this tutorial.