Keyword search

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (22 items: Prince Edward Island; Canada; Newfoundland and Labrador; Atlantic provinces ...), Housing estimates (3 items: Housing starts; Housing completions; Housing under construction ...), Type of unit (6 items: Total units; Semi-detached units; Row units; Single-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (86 items: Nova Scotia; Prince Edward Island; Canada; Newfoundland and Labrador ...), Type of dwelling unit (5 items: Total units; Row units; Single units; Semi-detached units ...), Type of market (5 items: Homeowner; Rental; Condo; Co-op ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (37 items: Census metropolitan areas; Abbotsford-Mission, British Columbia; Barrie, Ontario; Brantford, Ontario; ...);  Completed dwelling units (2 items: Absorptions; Unabsorbed inventory);  Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (38 items: All census agglomerations 50;000 and over; Barrie; Ontario; Belleville; Ontario; Abbotsford-Mission; British Columbia ...), Completed dwelling units (2 items: Absorptions; Unabsorbed inventory ...), Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (11 items: Nova Scotia; Prince Edward Island; Newfoundland and Labrador; Canada ...), Housing estimates (3 items: Housing starts; Housing under construction; Housing completions ...), Type of unit (5 items: Total units; Single-detached units; Row units; Semi-detached units ...).

Description: Quarterly other changes in assets account data, for the household, non-profit institutions serving households, corporations, general governments and non-resident sectors, as well as the total of all sectors by category.

Description:

General government gross domestic and foreign debt, and financial liabilities by category, quarterly.

Description:

Quarterly Financial Flow Accounts data, for the household, corporations, general governments and non-resident sectors, as well as the total of all sectors and the statistical discrepancy, by category.

Description:

This financial market summary table presents quarterly Financial Flow Accounts data, unadjusted, by category.

Description: Quarterly national balance sheet data, for the household, corporations, general governments and non-resident sectors, as well as the total of all sectors and the consolidated national balance sheet, by category, in both market and book value.

Description: Infrastructure is the physical structures and systems that support the production of goods and services and their delivery to and consumption by governments, businesses and citizens. The industry undertaking that infrastructure investment is also presented. Accumulating investment flows over time produces an estimate of the stock of infrastructure assets. The perpetual inventory method is used as it estimates a value of the net stock of fixed assets in existence and in the hands of producers which is generally based on estimating how many of the fixed assets installed, as a result of investment undertaken in previous years, have survived to the current period. The depreciation of that stock is calculated using the geometric method with asset specific depreciation profiles.

Description: The economic contribution as a result of the production of infrastructure assets due to investment is presented for valued added (GDP), compensation of employees and number of jobs. Value-added is a key measure of economic performance. It represents the output of an industry minus the value of intermediate inputs that were used up in the production of the goods and services. Within the Infrastructure Economic Accounts, this is the value added due to an industry's production of infrastructure assets. The number of jobs represents the number of jobs held by the self-employed, employees and unpaid family workers. The compensation of employees represents the wages and salaries, and supplementary labour income due to labour inputs for the production of infrastructure assets.

Description: The average age of investment is the weighted age of all investments remaining in the gross stock at year end. The remaining useful life, which is the difference between the average age of the investment spending and their expected service life, is then divided by the expected service life, creating a ratio that indicates the percentage of the asset class that remains.

Description: Expansion of the Infrastructure Economic Accounts focusing on the environmental aspect to aid in understanding the relationship between investment in infrastructure and the environment. Main indicators include greenhouse gas emissions as a result of production of infrastructure assets, greenhouse gas emissions per value-added, and clean input proportion.

Description:

Quarterly balance sheet of the other financial corporations sector presented on a modified whom-to whom basis at market value according to the Special Data Dissemination Standard Plus (SDDS plus).

Description:

The author briefly reviews the factors determining the production of health statistics in Canada, with particular attention to the different sources of data and to the long-standing co-operation among the many agencies involved in the gathering of health-related information.

Description:

This paper presents results of an empirical study on fitting log-linear models to data on estimates of characteristics and their coefficients of variation (CV) from the Canadian Labour Force Survey. The characteristics were classified into groups on the basis of design effects and models were fitted to data on estimates of characteristic totals and their CVs over twelve month period. The models can be used in situations where estimates of CV are needed for new characteristics, and for providing more precise estimates of reliability of estimates based on past data. The problem of evaluation of fit of the models is considered.

Description:

The methodology of the For-hire Trucking Survey is discussed in this paper. This survey provides good examples of administrative and operational constraints faced by survey statisticians and field data collection teams.

Description:

An aspect of surveys not always given adequate consideration is maintenance.

The scope and importance of survey maintenance are discussed and a case is made for a more scientific methodological approach. Practical applications to various stages of surveys are illustrated by examples from the Canadian Labour Force Survey.

Description:

In surveys a response may be incomplete or some items may be inconsistent or, as in the case of two-phase sampling, items may be unavailable. In these cases it may be expedient to impute values for the missing items. While imputation is not a particularly good solution to any specific estimation problem, it does permit the production of arbitrary estimates in a consistent way.

The survey statistician may have to cope with a mixture of numerical and categorical items, subject to a variety of constraints. He should evaluate his technique, especially with respect to bias. He should make sure that imputed items are clearly identified and summary reports produced.

A variety of imputation techniques in current use is described and discussed, with particular reference to the practical problems involved.

Description:

A FORTRAN Subroutine to obtain the “working probabilities” for Fellegi’s (1963) method of unequal probability sampling is given. The solution is obtained by an iterative procedure where the starting values for the (k+l)th draw “working probabilities” are the solutions for the kth draw “working probabilities” and the iterative procedure is terminated when a prespecified accuracy is achieved. The limitation is that the Subroutine can only be used to obtain up to and including the 5th draw “working probabilities”. It was observed that the convergence occurs very fast in double precision. Therefore all real variables have been declared as double precision. The joint selection probabilities \Pi_{ij}’s i.e. the probability that both the ith and jth units are in the sample are obtained by summing the probabilities of selecting those samples that contain both the ith and jth units. The joint selection probabilities are required for the variance estimation of the Horvitz-Thompson estimator of population total of the characteristic of interest.

Description:

Survey organizations undertake periodic redesigns of continuous surveys. Reasons for such redesigns related to changes in information needs to be satisfied by the survey and changes in public awareness and attitudes towards surveys are discussed in the context of the redesign of the Canadian Labour Force Survey following the 1981 Census. In particular, the importance of close dialogue between users of the survey data and design statisticians at the early stages of the redesign process in order to establish survey objectives is stressed.

Description:

The Department of Supply and Services’ role and procedures are outlined as they relate to those using the services of the Department of Supply and Services and those receiving contracts.

There are two basic principles which cover all the policies and procedures. These are: i) the equality of opportunity to compete for Government contracts must be afforded to all qualified suppliers; and ii) that fair value for the taxpayers’ dollar must be obtained.

Description:

This paper discusses some of the changes in market research we should expect in the next decade. Currently, studies are issue oriented: they provide answers to specific questions or marketing issues. The next decade will see research projects with a broader scope: to understand how markets work and why consumers behave as they do. Measurements will be more complex, and multivariate analysis techniques will be used extensively to identify the subtle relationships within the data. Marketing models will be the conceptual framework for these more complex studies. Market analysis identifying consumer responsiveness segments provides a case example of what might be expected from model-based market research studies.

Description:

This paper identifies the stages in the life-cycle of government policies and programs. For each stage, examples are given of how survey research is presently used and likely trends over the next decade are identified.

Description: Documents in this series provide insight into the statistical methods used by Statistics Canada to produce official statistics. They include introductory material, in-depth descriptions of techniques and methods, best practices, and guidelines. All documents have undergone review to ensure that they conform to Statistics Canada's mandate and adhere to generally accepted methodological standards and practices.

Description: This article provides nontechnical answers to questions related to the production, use and interpretation of advance indicators for Statistics Canada’s Monthly Survey of Manufacturing, Monthly Wholesale Trade Survey and Monthly Retail Trade Survey.

Description: This reference document provides answers on selected topics related to the use, interpretation, and calculation of trend-cycle estimates for seasonally adjusted data. It is designed to complement more technical discussions of seasonal adjustment and trend-cycle estimation found in Statistics Canada publications and reference manuals.

Description: This reference document provides nontechnical answers on selected topics related to the use and interpretation of seasonally adjusted data. It is designed to complement more technical discussions of seasonal adjustment found in Statistics Canada publications and reference manuals.

Description: This product contains articles related to the latest methodological, conceptual developments in the Canadian System of Macroeconomic Accounts as well as the analysis of the Canadian economy. It includes articles detailing new methods, concepts and statistical techniques used to compile the Canadian System of Macroeconomic Accounts. It also includes information related to new or expanded data products, provides updates and supplements to information found in various guides and analytical articles touching upon a broad range of topics related to the Canadian economy.

Description: Health regions are defined by the provinces and represent administrative areas or regions of interest to health authorities. This product contains correspondence files (linking health regions to latest Census geographic codes) and digital boundary files. User documentation provides an overview of health regions, sources, methods, limitations and product description (file format and layout).

In addition to the geographic files, this product also includes Census data (basic profile) for health regions.

Description: Recent changes in Canada’s immigration levels have heightened interest in understanding how immigration affects housing demand. This article develops a methodological framework for projecting housing use associated with permanent residents (PRs) and non-permanent residents (NPRs) under alternative immigration scenarios. The framework applies observed per capita housing use rates from the Census of Population to estimate incremental housing use by tenure over time.

Description: Departmental Plans (DP) are individual expenditure plans for each department and agency. These reports provide increased levels of detail over a three-year period on an organization's main priorities by strategic outcome, program and planned/expected results, including links to related resource requirements presented in the Main Estimates. In conjunction with the Main Estimates, Departmental Plans serve to inform members of Parliament on planned expenditures of departments and agencies, and support Parliament's consideration of supply bills. The DPs are typically tabled soon after the Main Estimates by the President of the Treasury Board.

Description: The publication features products and data highlights that focus on rural areas of Canada or that have a rural dimension present. Rural areas are typically areas outside of Canada's Census Metropolitan Areas (CMA) and Census Agglomerations (CA). The publication also includes explanatory notes on key concepts and definitions.

Description: This report defines key concepts related to area-level analysis and introduces area-level measures developed and utilized at Statistics Canada for health analysis. It also provides a decision-making framework and practical recommendations to help researchers select appropriate methods. The goal is to guide readers on when area-level analysis is appropriate and what type of area-level measure is suitable to achieve research objectives.