Keyword search

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (22 items: Prince Edward Island; Canada; Newfoundland and Labrador; Atlantic provinces ...), Housing estimates (3 items: Housing starts; Housing completions; Housing under construction ...), Type of unit (6 items: Total units; Semi-detached units; Row units; Single-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (86 items: Nova Scotia; Prince Edward Island; Canada; Newfoundland and Labrador ...), Type of dwelling unit (5 items: Total units; Row units; Single units; Semi-detached units ...), Type of market (5 items: Homeowner; Rental; Condo; Co-op ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (37 items: Census metropolitan areas; Abbotsford-Mission, British Columbia; Barrie, Ontario; Brantford, Ontario; ...);  Completed dwelling units (2 items: Absorptions; Unabsorbed inventory);  Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (38 items: All census agglomerations 50;000 and over; Barrie; Ontario; Belleville; Ontario; Abbotsford-Mission; British Columbia ...), Completed dwelling units (2 items: Absorptions; Unabsorbed inventory ...), Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (11 items: Nova Scotia; Prince Edward Island; Newfoundland and Labrador; Canada ...), Housing estimates (3 items: Housing starts; Housing under construction; Housing completions ...), Type of unit (5 items: Total units; Single-detached units; Row units; Semi-detached units ...).

Description:

This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

Description: The Public-Use Microdata File (PUMF) for the Survey of Household Spending (SHS) provides information on household expenditures as well as selected information on dwelling characteristics and household equipment. The production of this file includes many safeguards to prevent the identification of any one person or household.

PUMFs were produced on an annual basis for SHS 1997 to 2009, before a redesigned survey was introduced with the 2010 reference year. The SHS 2017 PUMF is the first SHS PUMF based on data collected after the 2010 survey redesign.

Due to changes to data collection, processing and estimation methods introduced with the 2010 redesign, users are advised not to compare data from SHS 1997 to 2009 with data from any subsequent years, unless otherwise noted.

Description: Basket weights of major components, gasoline, and selected special aggregates of the Consumer Price Index (CPI) basket, for Canada, provinces, Whitehorse, Yellowknife and Iqaluit, last 5 years of the CPI basket. Includes price period of the weights as either weights at basket link month prices or weights at basket reference period prices. Weights are shown in percentage terms.

Description: Basket weights of the all-items Consumer Price Index (CPI) basket, for Canada, provinces, Whitehorse, Yellowknife and Iqaluit, last 5 years of the CIP basket. Includes price period of the weights as either weights at basket link month prices or weights at basket reference period prices. Weights are shown in percentage terms.

Description:

Wholesale sales, price and volume, for Canada, includes all members under North American Industry Classification System. Data are seasonally adjusted, available on a monthly basis in dollars x 1,000,000.

Description:

Wholesale sales, price and volume for motor vehicle and parts merchant wholesalers. Data are seasonally adjusted, available for Canada on a monthly basis in dollars x 1,000,000.

Description:

Wholesale trade sales, available for all members under North American Industry Classification System (NAICS) and adjustments dimensions, available monthly, for Canada, provinces and territories, in dollars X 1,000.

Description:

Wholesale trade sales for motor vehicle and parts merchant wholesalers. Seasonally adjusted and unadjusted data are available on a monthly basis for Canada, provinces and territories, in dollars X 1,000.

Description:

Wholesale trade inventories, available for all members under adjustments and North American Industry Classification System (NAICS) dimensions, available on a monthly basis, for Canada, in dollars x 1,000.

Description:

Wholesale trade inventories for motor vehicle and parts merchant wholesalers. Seasonally adjusted and unadjusted data are available on a monthly basis for Canada, in dollars x 1,000.

Description:

The author briefly reviews the factors determining the production of health statistics in Canada, with particular attention to the different sources of data and to the long-standing co-operation among the many agencies involved in the gathering of health-related information.

Description:

This paper presents results of an empirical study on fitting log-linear models to data on estimates of characteristics and their coefficients of variation (CV) from the Canadian Labour Force Survey. The characteristics were classified into groups on the basis of design effects and models were fitted to data on estimates of characteristic totals and their CVs over twelve month period. The models can be used in situations where estimates of CV are needed for new characteristics, and for providing more precise estimates of reliability of estimates based on past data. The problem of evaluation of fit of the models is considered.

Description:

The methodology of the For-hire Trucking Survey is discussed in this paper. This survey provides good examples of administrative and operational constraints faced by survey statisticians and field data collection teams.

Description:

An aspect of surveys not always given adequate consideration is maintenance.

The scope and importance of survey maintenance are discussed and a case is made for a more scientific methodological approach. Practical applications to various stages of surveys are illustrated by examples from the Canadian Labour Force Survey.

Description:

In surveys a response may be incomplete or some items may be inconsistent or, as in the case of two-phase sampling, items may be unavailable. In these cases it may be expedient to impute values for the missing items. While imputation is not a particularly good solution to any specific estimation problem, it does permit the production of arbitrary estimates in a consistent way.

The survey statistician may have to cope with a mixture of numerical and categorical items, subject to a variety of constraints. He should evaluate his technique, especially with respect to bias. He should make sure that imputed items are clearly identified and summary reports produced.

A variety of imputation techniques in current use is described and discussed, with particular reference to the practical problems involved.

Description:

A FORTRAN Subroutine to obtain the “working probabilities” for Fellegi’s (1963) method of unequal probability sampling is given. The solution is obtained by an iterative procedure where the starting values for the (k+l)th draw “working probabilities” are the solutions for the kth draw “working probabilities” and the iterative procedure is terminated when a prespecified accuracy is achieved. The limitation is that the Subroutine can only be used to obtain up to and including the 5th draw “working probabilities”. It was observed that the convergence occurs very fast in double precision. Therefore all real variables have been declared as double precision. The joint selection probabilities \Pi_{ij}’s i.e. the probability that both the ith and jth units are in the sample are obtained by summing the probabilities of selecting those samples that contain both the ith and jth units. The joint selection probabilities are required for the variance estimation of the Horvitz-Thompson estimator of population total of the characteristic of interest.

Description:

Survey organizations undertake periodic redesigns of continuous surveys. Reasons for such redesigns related to changes in information needs to be satisfied by the survey and changes in public awareness and attitudes towards surveys are discussed in the context of the redesign of the Canadian Labour Force Survey following the 1981 Census. In particular, the importance of close dialogue between users of the survey data and design statisticians at the early stages of the redesign process in order to establish survey objectives is stressed.

Description:

The Department of Supply and Services’ role and procedures are outlined as they relate to those using the services of the Department of Supply and Services and those receiving contracts.

There are two basic principles which cover all the policies and procedures. These are: i) the equality of opportunity to compete for Government contracts must be afforded to all qualified suppliers; and ii) that fair value for the taxpayers’ dollar must be obtained.

Description:

This paper discusses some of the changes in market research we should expect in the next decade. Currently, studies are issue oriented: they provide answers to specific questions or marketing issues. The next decade will see research projects with a broader scope: to understand how markets work and why consumers behave as they do. Measurements will be more complex, and multivariate analysis techniques will be used extensively to identify the subtle relationships within the data. Marketing models will be the conceptual framework for these more complex studies. Market analysis identifying consumer responsiveness segments provides a case example of what might be expected from model-based market research studies.

Description:

This paper identifies the stages in the life-cycle of government policies and programs. For each stage, examples are given of how survey research is presently used and likely trends over the next decade are identified.

Description:

This geographical file represents Canada's national road network, containing information such as street names, types, directions and address ranges.

A reference guide is available (Road Network File, Reference Guide, 92-500-G).

Description: This report provides a summary of changes to municipal boundaries, status and names. The list is usually produced on an annual basis for changes that occurred during the previous year. A five year list is produced on Census of population years.

Description: The Canadian Census Health and Environment Cohorts (CanCHECs) are a series of population-based microdata linkages. The CanCHECs combine census respondents to the long-form questionnaire with administrative health data and annual postal codes for mailing addresses. These data can be used to examine health outcomes by population characteristics measured by the census long-form sample data. This user guide has been created to help potential data users, including researchers and academics, public health officials, government agencies, the private sector, and non-governmental organizations.

Description: This reference guide is intended for users of the Survey of Environmental Goods and Services (SEGS). The tables indicate which technologies and services were included in SEGS.

Description: This publication provides user guides and datasets containing statistics on a variety of topics and issues related to justice and community safety.

Description: The Canadian Index of Social Resilience (CISR) and the Canadian Index of Social Vulnerability (CISV) were created to provide area-based information on resilience and vulnerability to natural hazards and disasters across Canada. The user guide explains how the CISR and CISV were developed and how to use them. The indexes can be used to better understand areas which may experience the largest disproportional social impacts from natural hazards.

Description: This guide presents information of interest to users of data from the Survey of Household Spending (SHS). It includes descriptions of the survey terms and variables definitions as well as of the survey methodology and data quality. The guide also includes a section describing various examples of estimates that can be drawn from the survey data.

Description: This product contains specifications intended for users of the land cover register geospatial files. This document provides important technical information for users and links to methodology.

Description: This product contains specifications intended for users of the Statistical Ecosystem Register grid system reference files. This document provides important technical information for users, including the coordinate reference system, resolution, and file contents and structure. This document also provides additional information about the grid system, reasons for some of the chosen parameters, and intended uses.

Description: The purpose of this series of videos is to provide you with a good understanding of data table building concepts and to present you with some of the data table key components that might come into play when analysing data. This video will introduce you to census data and census data tables.