Keyword search

Description: Data are presented at the national level, by fuel type (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description: Data are presented at the national level by fuel type in gigajoules (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description: Chemicals and synthetic resins products annual production, data in tonnes.

Description:

Measurements of the production of asphalt roofing materials, as well as the shipments of these products, across Canada and exports.

Description: The purpose of this research paper is to highlight the impact of the many challenges faced over time by the sawmill industry on its development and its role as an economic lever for many Canadian communities.

Description:

This infographic looks at the impact the pandemic and supply chain disruptions have had on manufacturing in Canada. Specific data that is collected by the Monthly Survey of Manufacturing is shown on the infographic to help highlight the impacts.

Description:

Demand, consumption, expected procurement, manufacturing production, manufacturing capacity and distribution of personal protective equipment (PPE) by Canadian businesses by North American Industry Classification System (NAICS) for Canada and regions.

Description:

Number of businesses needing, not needing, don’t know if they need personal protection equipment (PPE), number of employees, average percentage of full-time employees by North American Industry Classification System (NAICS) for Canada and regions. Information on number of manufacturers and distributors of PPE for Canada and regions is also available.

Description:

The federal government offers business innovation and growth support through program streams managed by its departments and agencies. In 2017, enterprises in the manufacturing sector accounted for almost one-quarter of the beneficiaries of this support and received almost one-third of the total value of support (Statistics Canada, 2020). The objective of this analysis is to assess the impact of federal growth and innovation support on the employment and revenue of beneficiary enterprises in the manufacturing sector between 2007 and 2017. This analysis suggests that enterprises that received federal support for growth and innovation experienced stronger employment and revenue growth relative to non-beneficiary enterprises. Over the three years following receipt of support, employment growth for beneficiary enterprises averaged 1.8% per year while, on average, enterprises that did not receive support experienced employment declines. Over the same period, the average annual revenue growth of beneficiary enterprises was higher than that of non-beneficiary enterprises by 4.6 percentage points.

Description: This infographic features sales and inventories for the petroleum and coal products industry, as well as refinery production, while highlighting the impacts related to the COVID-19 pandemic.

Description: This section is concerned with those statistics referring to the allocation of lands and the production of forests. To some extent, these two questions are compatible only in that they have fallen under the same administrative unit for the purposes of management and data collection. They continue together in this volume as a matter of convenience. The data relating to land refer to the allocation of lands for settlement, production and recreation, and are, wherever possible, reported at both the national and provincial level. Those data relating to forests are concerned with primary products, the manufacturing of lumber, pulp and paper, and exports. Sources, together with problems or qualifications associated with them, are identified in each table by footnotes.

Description:

This section includes production, exports and imports of metallic and non-metallic minerals, the latter category including structural materials but excluding fuels, which are reported in the Energy chapter, Section Q. The section contains three parts: metallic minerals, series P1-81; non-metallic minerals, series P82-150; and principal statistics, series P151-162. The first two parts contain quantities and value of production, exports and imports; the third part contains number of employees, salaries and wages, cost of fuel and electricity, cost of process supplies and containers, gross value of production and net value added by processing.

Description:

This section updates the official statistics on manufactures for 1870 to 1959 presented in the first edition of Historical Statistics of Canada. Apart from minor revision to some series for the years 1952 to 1959, no revisions have been made to the statistics from 1870 to 1959. The descriptions of the statistics for this period have been reproduced without change from the description in the first edition written by Arthur J.R. Smith.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

From the early 2000s to the mid-2010s, the number of employees in manufacturing fell by roughly half a million in Canada. During that period, the percentage of Canadian men aged 21 to 55 employed mainly full time for at least 48 weeks in a given year fell by 5 percentage points, from 63.6% in 2000 to 58.6% in 2015. This study investigates whether the two trends are connected, i.e., whether the decline in manufacturing employment caused a decline in employment rates and wages among men.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: The need to measure both the desirable outputs (goods and services) and the undesirable outputs (emissions of greenhouse gases [GHGs] and criteria air contaminants [CACs]) from economic activity is becoming increasingly important as economic performance and environmental performance become ever more intertwined. Standard measures of multifactor productivity (MFP) growth provide insights into rising standards of living and the performance of economies, but they may be misleading if only desirable outputs are considered. This study presents estimates of environmentally adjusted multifactor productivity (EAMFP) growth using a new comprehensive database. This database contains information on GHG and CAC emissions, as well as on the production activities of Canadian manufacturers.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

The industrial capacity utilization rate (ICUR) is the ratio of an industry’s actual output to its estimated potential output—it represents the intensity with which industries use their production capacity. The rate provides insight into the overall slack in the economy or in a firm at a given point in time.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: The objective of this survey is to collect new statistical information on the nature and extent of product, process, marketing and organizational innovations in the Canadian food processing industry and on other emerging issues in the food processing industry;

Description: The survey produces statistics on shipments of fertilizer in Canada by manufacturers, wholesale distributors and major retailers.

Description: The Survey of Industrial Processes (SIP) is an industry-specific business survey focusing on small- and medium-sized enterprises (SMEs). It is designed to link economic data with industrial processes and environmental outcomes. The SIP collects data on operational activities and engineering processes of industrial, manufacturing, and service oriented establishments.

Description: This survey collects sales (end-use) information for light fuel oil from all refineries and major distributors in Canada.

Description: Information from this survey is used for market analysis, industrial and regional development, establishing trade and tariff policies, and managing natural resources.

Description: The Annual Mineral Production Survey is a survey of the mining industry in Canada. It is intended to cover all establishments primarily engaged in mining or quarrying activities as well as establishments engaged in secondary business activity linked to the mining sector. Data collected from businesses are aggregated with information from other sources to produce official estimates at the national and provincial level.

Description: The Monthly Mineral Production Survey provides information on the performance of the mining sector in Canada. This survey presents estimates on monthly production and inventories of products such as metallic and non-metallic minerals as well as aggregates and refractory minerals.

Description: The survey collects information related to the purchase, production, and sale of goods abroad by Canadian businesses. It also gathers information on whether Canadian businesses perform manufacturing or processing work for other Canadian or foreign clients, and whether Canadian businesses hire other Canadian or foreign firms to perform the same type of work.

Description: The Annual Mineral Production Survey - Preliminary Estimates is a survey of the mining industry in Canada. It is intended to cover establishments primarily engaged in mining or quarrying activities as well as establishments engaged in secondary business activity explicitly linked to the mining sector. Data collected from businesses are aggregated with information from other sources to produce official estimates of national and provincial production for these activities.

Description: This is non-Statistics Canada information.