Keyword search

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (22 items: Prince Edward Island; Canada; Newfoundland and Labrador; Atlantic provinces ...), Housing estimates (3 items: Housing starts; Housing completions; Housing under construction ...), Type of unit (6 items: Total units; Semi-detached units; Row units; Single-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (86 items: Nova Scotia; Prince Edward Island; Canada; Newfoundland and Labrador ...), Type of dwelling unit (5 items: Total units; Row units; Single units; Semi-detached units ...), Type of market (5 items: Homeowner; Rental; Condo; Co-op ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (37 items: Census metropolitan areas; Abbotsford-Mission, British Columbia; Barrie, Ontario; Brantford, Ontario; ...);  Completed dwelling units (2 items: Absorptions; Unabsorbed inventory);  Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (38 items: All census agglomerations 50;000 and over; Barrie; Ontario; Belleville; Ontario; Abbotsford-Mission; British Columbia ...), Completed dwelling units (2 items: Absorptions; Unabsorbed inventory ...), Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (11 items: Nova Scotia; Prince Edward Island; Newfoundland and Labrador; Canada ...), Housing estimates (3 items: Housing starts; Housing under construction; Housing completions ...), Type of unit (5 items: Total units; Single-detached units; Row units; Semi-detached units ...).

Description:

This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

Description: The Public-Use Microdata File (PUMF) for the Survey of Household Spending (SHS) provides information on household expenditures as well as selected information on dwelling characteristics and household equipment. The production of this file includes many safeguards to prevent the identification of any one person or household.

PUMFs were produced on an annual basis for SHS 1997 to 2009, before a redesigned survey was introduced with the 2010 reference year. The SHS 2017 PUMF is the first SHS PUMF based on data collected after the 2010 survey redesign.

Due to changes to data collection, processing and estimation methods introduced with the 2010 redesign, users are advised not to compare data from SHS 1997 to 2009 with data from any subsequent years, unless otherwise noted.

Description: Basket weights of major components, gasoline, and selected special aggregates of the Consumer Price Index (CPI) basket, for Canada, provinces, Whitehorse, Yellowknife and Iqaluit, last 5 years of the CPI basket. Includes price period of the weights as either weights at basket link month prices or weights at basket reference period prices. Weights are shown in percentage terms.

Description: Basket weights of the all-items Consumer Price Index (CPI) basket, for Canada, provinces, Whitehorse, Yellowknife and Iqaluit, last 5 years of the CIP basket. Includes price period of the weights as either weights at basket link month prices or weights at basket reference period prices. Weights are shown in percentage terms.

Description:

Wholesale sales, price and volume, for Canada, includes all members under North American Industry Classification System. Data are seasonally adjusted, available on a monthly basis in dollars x 1,000,000.

Description:

Wholesale sales, price and volume for motor vehicle and parts merchant wholesalers. Data are seasonally adjusted, available for Canada on a monthly basis in dollars x 1,000,000.

Description:

Wholesale trade sales, available for all members under North American Industry Classification System (NAICS) and adjustments dimensions, available monthly, for Canada, provinces and territories, in dollars X 1,000.

Description:

Wholesale trade sales for motor vehicle and parts merchant wholesalers. Seasonally adjusted and unadjusted data are available on a monthly basis for Canada, provinces and territories, in dollars X 1,000.

Description:

Wholesale trade inventories, available for all members under adjustments and North American Industry Classification System (NAICS) dimensions, available on a monthly basis, for Canada, in dollars x 1,000.

Description:

Wholesale trade inventories for motor vehicle and parts merchant wholesalers. Seasonally adjusted and unadjusted data are available on a monthly basis for Canada, in dollars x 1,000.

Description:

The author briefly reviews the factors determining the production of health statistics in Canada, with particular attention to the different sources of data and to the long-standing co-operation among the many agencies involved in the gathering of health-related information.

Description:

This paper presents results of an empirical study on fitting log-linear models to data on estimates of characteristics and their coefficients of variation (CV) from the Canadian Labour Force Survey. The characteristics were classified into groups on the basis of design effects and models were fitted to data on estimates of characteristic totals and their CVs over twelve month period. The models can be used in situations where estimates of CV are needed for new characteristics, and for providing more precise estimates of reliability of estimates based on past data. The problem of evaluation of fit of the models is considered.

Description:

The methodology of the For-hire Trucking Survey is discussed in this paper. This survey provides good examples of administrative and operational constraints faced by survey statisticians and field data collection teams.

Description:

An aspect of surveys not always given adequate consideration is maintenance.

The scope and importance of survey maintenance are discussed and a case is made for a more scientific methodological approach. Practical applications to various stages of surveys are illustrated by examples from the Canadian Labour Force Survey.

Description:

In surveys a response may be incomplete or some items may be inconsistent or, as in the case of two-phase sampling, items may be unavailable. In these cases it may be expedient to impute values for the missing items. While imputation is not a particularly good solution to any specific estimation problem, it does permit the production of arbitrary estimates in a consistent way.

The survey statistician may have to cope with a mixture of numerical and categorical items, subject to a variety of constraints. He should evaluate his technique, especially with respect to bias. He should make sure that imputed items are clearly identified and summary reports produced.

A variety of imputation techniques in current use is described and discussed, with particular reference to the practical problems involved.

Description:

A FORTRAN Subroutine to obtain the “working probabilities” for Fellegi’s (1963) method of unequal probability sampling is given. The solution is obtained by an iterative procedure where the starting values for the (k+l)th draw “working probabilities” are the solutions for the kth draw “working probabilities” and the iterative procedure is terminated when a prespecified accuracy is achieved. The limitation is that the Subroutine can only be used to obtain up to and including the 5th draw “working probabilities”. It was observed that the convergence occurs very fast in double precision. Therefore all real variables have been declared as double precision. The joint selection probabilities \Pi_{ij}’s i.e. the probability that both the ith and jth units are in the sample are obtained by summing the probabilities of selecting those samples that contain both the ith and jth units. The joint selection probabilities are required for the variance estimation of the Horvitz-Thompson estimator of population total of the characteristic of interest.

Description:

Survey organizations undertake periodic redesigns of continuous surveys. Reasons for such redesigns related to changes in information needs to be satisfied by the survey and changes in public awareness and attitudes towards surveys are discussed in the context of the redesign of the Canadian Labour Force Survey following the 1981 Census. In particular, the importance of close dialogue between users of the survey data and design statisticians at the early stages of the redesign process in order to establish survey objectives is stressed.

Description:

The Department of Supply and Services’ role and procedures are outlined as they relate to those using the services of the Department of Supply and Services and those receiving contracts.

There are two basic principles which cover all the policies and procedures. These are: i) the equality of opportunity to compete for Government contracts must be afforded to all qualified suppliers; and ii) that fair value for the taxpayers’ dollar must be obtained.

Description:

This paper discusses some of the changes in market research we should expect in the next decade. Currently, studies are issue oriented: they provide answers to specific questions or marketing issues. The next decade will see research projects with a broader scope: to understand how markets work and why consumers behave as they do. Measurements will be more complex, and multivariate analysis techniques will be used extensively to identify the subtle relationships within the data. Marketing models will be the conceptual framework for these more complex studies. Market analysis identifying consumer responsiveness segments provides a case example of what might be expected from model-based market research studies.

Description:

This paper identifies the stages in the life-cycle of government policies and programs. For each stage, examples are given of how survey research is presently used and likely trends over the next decade are identified.

Description: The purpose of this series of videos is to provide you with a good understanding of data table building concepts and to present you with some of the data table key components that might come into play when analyzing data. This video will explain the data requirements for creating a table with census data.

Description: The purpose of this series of videos is to provide you with a good understanding of data table building concepts and to present you with some of the data table key components that might come into play when analyzing data. This video will provide you with a deeper understanding of census focuses and populations of interest.

Description: The purpose of this series of videos is to provide you with a good understanding of data table building concepts and to present you with some of the data table key components that might come into play when analyzing data. This video will explore the variables and dimensions that are associated with different focuses and populations of interest.

Description: The purpose of this series of videos is to provide you with a good understanding of data table building concepts and to present you with some of the data table key components that might come into play when analyzing data. This video will explore census geographies and show you how to use them when building a table.

Description: This video is part of a series that is designed to give you a basic understanding of the Census of Population web pages. The purpose of this video is to explain where to find and how to extract census data tables on the 2021 Census of Population website.

Description: The Consolidated Energy Statistics table (CEST) provides national level monthly estimates of supply and demand characteristics, for both primary and secondary energy sources by fuel type. The data is presented in terajoules; a common unit of measure, allowing easy comparisons between different fuel and energy types. The table is updated with new data on a monthly basis.

Description: The Guide to the Labour Force Survey contains a dictionary of concepts and definitions and covers topics such as survey methodology, data collection, data processing and data quality. It also contains information on products and services, sub-provincial geography descriptions as well as the survey questionnaire.

Description: The data for the products associated with this technical reference guide are derived from an early version of the T1 file that Statistics Canada receives from Canada Revenue Agency (CRA). Data on special topics linked to income and income tax deductions can be derived from the T1 income tax returns. Topics of interest for this preliminary release of the T1 data can vary from year to year.

Description: This document describes the methodology used to develop the land cover register, a raster dataset that maps Canada’s terrestrial and freshwater land cover using an 11-class classification system. The data product, with a spatial resolution of 30 metres, represents circa 2020 and was created through the integration of multiple land cover and land use datasets. The dataset and documentation were created by the Census of Environment program and will support Statistics Canada's ecosystem accounting efforts.

Description: The Guide to the Survey of Employment, Payrolls and Hours contains a dictionary of concepts and definitions and covers topics such as survey methodology, data collection and processing, and data quality. It also provides information on products and services, as well as the survey questionnaire.