Keyword search

View results

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Subject

Type

13 facets displayed. 0 facets selected.

Year of publication

52 facets displayed. 0 facets selected.

Geography

32 facets displayed. 0 facets selected.

Survey or statistical program

732 facets displayed. 0 facets selected.

Portal

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,554)

All (26,554) (0 to 10 of 26,554 results)

Data (13,285)

Data (13,285) (20 to 30 of 13,285 results)

  • 21. Labour force characteristics by territory, three-month moving average, seasonally adjusted
    Table: 14-10-0292-02
    Geography: Province or territory
    Frequency: Monthly
    Description: Number of persons in the labour force (employment and unemployment), unemployment rate, participation rate and employment rate by territory, gender and age group. Data are presented for 12 months earlier, previous month and current month, as well as year-over-year and month-to-month level change and percentage change. Data are also available for the standard error of the estimate, the standard error of the month-to-month change and the standard error of the year-over-year change.
    Release date: 2026-06-05
  • 22. Employment by occupation, monthly, seasonally adjusted, last 5 months
    Table: 14-10-0310-01
    Geography: Canada
    Frequency: Monthly
    Description: Number of employees by National Occupational Classification (NOC), last 5 months. Data are also available for the standard error of the estimate, the standard error of the month-to-month change and the standard error of the year-over-year change.
    Release date: 2026-06-05
  • 23. Employment by occupation, monthly, seasonally adjusted
    Table: 14-10-0310-02
    Geography: Canada
    Frequency: Monthly
    Description: Number of employees by National Occupational Classification (NOC). Data are presented for 12 months earlier, previous month and current month, as well as year-over-year and month-to-month level change and percentage change. Data are also available for the standard error of the estimate, the standard error of the month-to-month change and the standard error of the year-over-year change.
    Release date: 2026-06-05
  • 24. Average usual hours and wages by selected characteristics, monthly, unadjusted for seasonality, last 5 months
    Table: 14-10-0320-01
    Geography: Canada
    Frequency: Monthly
    Description: Average usual hours and wages of employees (full- and part-time) by age group, gender, union coverage, job permanency, and National Occupational Classification (NOC). Data are presented for 24 months earlier, 12 months earlier and current month, as well as 24-month and year-over-year level change and percentage change, last 5 months.
    Release date: 2026-06-05
  • 25. Average usual hours and wages by selected characteristics, monthly, unadjusted for seasonality
    Table: 14-10-0320-02
    Geography: Canada
    Frequency: Monthly
    Description: Average usual hours and wages of employees (full- and part-time) by age group, gender, union coverage, job permanency, and National Occupational Classification (NOC). Data are presented for 24 months earlier, 12 months earlier and current month, as well as 24-month and year-over-year level change and percentage change.
    Release date: 2026-06-05
  • 26. Duration of unemployment, monthly, seasonally adjusted
    Table: 14-10-0342-01
    Geography: Canada, Province or territory
    Frequency: Monthly
    Description: Number of unemployed persons by duration of unemployment, gender and age group.
    Release date: 2026-06-05
  • 27. Regional unemployment rates used by the Employment Insurance program, three-month moving average, seasonally adjusted
    Table: 14-10-0354-01
    Frequency: Monthly
    Description: Regional unemployment rates used by the Employment Insurance program, by effective date, current month.
    Release date: 2026-06-05
  • 28. Employment by industry, monthly, seasonally adjusted and unadjusted, and trend-cycle, last 5 months
    Table: 14-10-0355-01
    Geography: Canada, Province or territory
    Frequency: Monthly
    Description:

    Number of employees by North American Industry Classification System (NAICS) and data type (seasonally adjusted, trend-cycle and unadjusted), last 5 months. Data are also available for the standard error of the estimate, the standard error of the month-to-month change and the standard error of the year-over-year change.

    Release date: 2026-06-05
  • 29. Employment by industry, monthly, seasonally adjusted
    Table: 14-10-0355-02
    Geography: Canada, Province or territory
    Frequency: Monthly
    Description:

    Number of employees by North American Industry Classification System (NAICS). Data are presented for 12 months earlier, previous month and current month, as well as year-over-year and month-to-month level change and percentage change. Data are also available for the standard error of the estimate, the standard error of the month-to-month change and the standard error of the year-over-year change.

    Release date: 2026-06-05
  • 30. Labour force characteristics by visible minority group, three-month moving averages, monthly, unadjusted for seasonality
    Table: 14-10-0373-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: Labour force characteristic estimates by visible minority group, age group, and gender.
    Release date: 2026-06-05
Analysis (10,770)

Analysis (10,770) (10,740 to 10,750 of 10,770 results)

  • 10,741. 1974 Survey of Housing Units Archived
    Articles and reports: 12-001-X197600200003
    Description: The 1974 Survey of Housing Units was carried out by Statistics Canada on behalf of the Central Mortgage and Housing Corporation during the autumn of 1974. Statistics Canada's responsibilities on this project included the design and implementation of all phases of the survey up to and including the production of "clean" micro data tapes. The sponsoring department was in turn responsible for the specification of objectives and data requirements and for the analysis of the resulting data.

    This report, which is a modification of the summary report produced by the project team at the conclusion of the project, provides a general description of the survey and the work done by Statistics Canada on the survey.
    Release date: 1976-12-13
  • 10,742. The estimation of total variance in the 1976 Census Archived
    Articles and reports: 12-001-X197600200004
    Description: Published reports for the 1976 Census will include estimates of Total Variance as indicators of the reliability of the figures in these reports. In order to obtain these estimates of Total Variance, an Interpenetrating Design Experiment was incorporated into the collection methods for a sample of enumeration areas. In this paper we derive the formula for Total Variance in terms of variances due to sampling, correlated response and simple response. We then show how the Total Variance, and its components, can be estimated from the design and we give the estimators that will be used for the 1976 Census. The estimates of sampling and correlated response variance are unbiased but the simple response variance estimate is not.
    Release date: 1976-12-13
  • 10,743. The methodology of the 1971 Reverse Record Check Archived
    Articles and reports: 12-001-X197600200005
    Description: The 1971 Reverse Record Check is one of the most important studies that were carried out as part of the 1971 Census Evaluation Programme. Its main purpose was to investigate the incidence of under-enumeration in the 1971 Census. To do this, a frame containing all persons who should be enumerated in the 1971 Census was built up from the 1966 Census returns, plus birth and immigrant registrations. A random sample was selected from the frame and each selected person was traced to his current Census address. Current Census returns were then checked to see whether or not the selected person was enumerated. Sample figures were weighted up to the population level to obtain estimates of undercoverage. This paper gives a general description of the methodology of this study, and indicates some of the resulting improvements incorporated for 1976.
    Release date: 1976-12-13
  • 10,744. An approximation to the inverse moments of the hypergeometric distribution Archived
    Articles and reports: 12-001-X197600200006
    Description: The negative moments of the positive hypergeometric distribution are often approximated by the inverse of the positive moments of this distribution. In this paper, a suitable approximation to the positive hypergeometric distribution is used to obtain the negative moments.
    Release date: 1976-12-13
  • 10,745. Double frame Ontario Pilot Hog Surveys Archived
    Articles and reports: 12-001-X197600200007
    Description: Three Ontario pilot hog surveys were conducted in 1975 to test a sampling method based on the simultaneous use of two list frames. This paper describes the different aspects of the experience. Particular emphasis is given to the double frame methodology such as discussed by Hartley [11]. Optimal allocation of the sample between frames is considered, with revision for each following survey based on all the accumulated results.
    Release date: 1976-12-13
  • 10,746. Methodology and analysis of the Pilot Auto Exit Survey, 1974 Archived
    Articles and reports: 12-001-X197600100001
    Description: The 1974 Pilot Auto Exit Survey tested three variants of a handout, mailback questionnaire for U.S. visitors leaving Canada, in a search for a reliable low-cost method of data collection. The sample design was based on a personal interview survey done in Ontario in 1973/74. This design, results of the Pilot, comparison with the Ontario results and some conclusions are presented in this paper.
    Release date: 1976-06-14
  • 10,747. Typical survey data: Estimation and imputation Archived
    Articles and reports: 12-001-X197600100002
    Description: A special class of missing data problems is discussed, namely that of typical survey data whereby zeros dominate the multivariate response space. Here, techniques which impute means (whether conditional or unconditional) distort rather than improve the quality of the data. A probabilistic model is described which provides reasonable estimates, but also upholds the integrity of the data base. Results are given from a comparative study of the proposed methodology with other estimation/imputation models.
    Release date: 1976-06-14
  • 10,748. Raking ratio estimators Archived
    Articles and reports: 12-001-X197600100003
    Description: This paper presents large sample results for the bias and variance of raking-ratio estimators for up to four iterations. Estimators of the bias and variance are also presented. An expression for the asymptotic covariance matrix of the maximum likelihood estimators of the cell proportions in a two-way table with known marginals is also given.
    Release date: 1976-06-14
  • 10,749. Methodology of the Labour Force Survey re-interview program Archived
    Articles and reports: 12-001-X197600100004
    Description: With the recent review of the Labour Force Survey, several periphexal projects have been redesigned. This is the case with the LFS re-interview program which will for the coming years be oriented toward the measurement of response errors. This paper describes the new design of the program and discusses how data will be analysed to achieve the objectives.
    Release date: 1976-06-14
  • 10,750. The multivariate Behrens-Fisher problem with application to the Labour Force Survey Archived
    Articles and reports: 12-001-X197600100005
    Description: This paper presents the Behrens-Fisher problem and gives an overview of the major solutions brought forward to this date. The aim of the paper is to use the most appropriate approach to the problem for testing sets of six month Labour Force Survey data against those of a pilot study. This is done since in many cases (such as Methods Test Panel studies) studies are conducted for six consecutive months and comparisons are required on the basis of those sets of six month data. Empirical results are also given by testing Methods Test Panel Phase III data against corresponding Labour Force Survey data.
    Release date: 1976-06-14
Reference (2,027)

Reference (2,027) (40 to 50 of 2,027 results)

Sort Help

How are the results ordered?

The Sort by feature provides four options:

  • By date – sorts results by product release date starting with the most recent.
  • By most popular – gives priority to results that are most frequently selected by users, followed by the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Sort Help

How are the results ordered?

The Sort by feature provides three options:

  • By date – sorts results by product release date starting with the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Search Help

How do I use the filters and the search box?

  • You can initiate a search by entering keywords or selecting filters (e.g., under Subject, Geography, etc.) on the left side of the page.

  • Filters can be used together or in any combination. Each time you select a filter, the results on the page are updated.

  • To start a new search, click on the Clear all button above the search box or deselect each filter.

  • Specified keywords and filters appear above the search box. You can deselect any or all the tags to refine or clear your search.

How do I refine my search?

  • You can enter keywords in the search box. It is not necessary to use “+” or “, “ or “AND”.

  • You can delete some or all of the keywords from your search string.

  • Quotes around keywords limit the search to a specific phrase.

    • For example, “labour force survey” will limit results to products containing this phrase.

  • Use “or” between keywords to obtain results that contain one or more search terms.

    • For example, labour or­ force or survey will limit results to products containing any or all of these words.

How does the search work?

  • This search looks for results that have your query term in the title, description, subject, geography, product number or other information about the product.

    • For example, when searching the term ‘Diseases’, all results with the word ‘Diseases’ in the title, description or tagged the subject appear.

  • The text within an article or publication are not searched. For full text searching of articles, use the site search.

Date modified: