Keyword search

Description: Data are presented at the national level, by fuel type (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description: Data are presented at the national level by fuel type in gigajoules (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description: Chemicals and synthetic resins products annual production, data in tonnes.

Description:

Measurements of the production of asphalt roofing materials, as well as the shipments of these products, across Canada and exports.

Description: The purpose of this research paper is to highlight the impact of the many challenges faced over time by the sawmill industry on its development and its role as an economic lever for many Canadian communities.

Description:

This infographic looks at the impact the pandemic and supply chain disruptions have had on manufacturing in Canada. Specific data that is collected by the Monthly Survey of Manufacturing is shown on the infographic to help highlight the impacts.

Description:

Demand, consumption, expected procurement, manufacturing production, manufacturing capacity and distribution of personal protective equipment (PPE) by Canadian businesses by North American Industry Classification System (NAICS) for Canada and regions.

Description:

Number of businesses needing, not needing, don’t know if they need personal protection equipment (PPE), number of employees, average percentage of full-time employees by North American Industry Classification System (NAICS) for Canada and regions. Information on number of manufacturers and distributors of PPE for Canada and regions is also available.

Description:

The federal government offers business innovation and growth support through program streams managed by its departments and agencies. In 2017, enterprises in the manufacturing sector accounted for almost one-quarter of the beneficiaries of this support and received almost one-third of the total value of support (Statistics Canada, 2020). The objective of this analysis is to assess the impact of federal growth and innovation support on the employment and revenue of beneficiary enterprises in the manufacturing sector between 2007 and 2017. This analysis suggests that enterprises that received federal support for growth and innovation experienced stronger employment and revenue growth relative to non-beneficiary enterprises. Over the three years following receipt of support, employment growth for beneficiary enterprises averaged 1.8% per year while, on average, enterprises that did not receive support experienced employment declines. Over the same period, the average annual revenue growth of beneficiary enterprises was higher than that of non-beneficiary enterprises by 4.6 percentage points.

Description: This infographic features sales and inventories for the petroleum and coal products industry, as well as refinery production, while highlighting the impacts related to the COVID-19 pandemic.

Description: Monthly capacity utilization rates for Canadian manufacturers by North American Industry Classification System (NAICS), from January 2017 to the current reference month.

Description: Canadian Sales of goods manufactured (shipments), new orders, unfilled orders, inventories, raw materials, goods or work in process, finished goods, and inventory to sales ratios for durable and non-durable goods by North American Industry Classification System (NAICS) for reference periods January 2002 to the current reference month. Not all combinations are available. Values are in constant dollars.

Description:

Monthly Canadian manufacturers' sales, new orders, unfilled orders, raw materials, goods or work in process, finished goods, total inventories, inventory to sales ratios and finished goods to sales ratios for durable and non-durable goods by North American Industry Classification System (NAICS), in dollars unless otherwise noted. Unadjusted and seasonally adjusted values available from January 1992 to the current reference month.

Description:

Monthly manufacturers' sales, inventories, orders and inventory-to-sales ratios, for motor vehicle and motor vehicle parts manufacturing industries, and motor vehicle body and trailer manufacturing industries, in dollars unless otherwise noted.

Description:

Monthly provincial and territorial manufacturing sales, by North American Industry Classification System (NAICS), data in thousands of dollars. Unadjusted and seasonally adjusted values available from January 1992 to the current reference month. Not all combinations are available.

Description: This table provides manufacturing sales data based on origin, destination and industry cross-tabulations from the Annual Survey of Manufacturing and Logging. Origins include all provinces and territories. Destinations include all provinces and territories, the United States of America, and the rest of the world. Industry detail is available at the 2, 3 and 4 digit NAICS level.

Description: Lumber, monthly production, shipments and stocks by species; data in thousands of cubic metres.

Description:

Lumber, monthly production, by product; data in thousands of cubic metres.

Description:

Lumber, monthly shipments, by product; data in thousands of cubic metres.

Description:

Lumber, monthly stocks, by product; data in thousands of cubic metres.

Description:

Food is as much a necessity as the air we breathe and the water we drink. But do we know where our food comes from, and what it takes to get it into our kitchens? The question of where our food is grown or processed is coming under increased scrutiny, not just in Canada but in other countries, including our trading partners. Concerns underlying this increased focus include discussions of energy consumption required for food transport, environmental concerns, product safety, food security and food costs. The article, Fork in the Road, takes a look at the trade in food and shows how Canadians can find out what foods are being produced in their local area.

Description: Canada stands to profit from the surge in food prices. Producers already have seen food exports hit a record high early in 2008. While consumers pay more for bread and cereals, this has been offset by stable or lower prices for other foodstuffs.

Description:

Using data from the Survey of Innovation 2005, this article will examine the use of patents by Canadian manufacturing plants. Survey findings establish that plants use strategic methods more than patents for intellectual property protection. Patent use varies both by how big the plant is and whether it is innovative or non-innovative. In addition, the use of patents by Canadian manufacturing plants varies by the subsector in which they are classified.

Description:

The 2005 Survey of Innovation asked non-innovative manufacturing plants why they did not innovate; that is, why they did not introduce a new or significantly improved product or process to the market during the three-year reference period 2002 to 2004. Lack of market demand was the main response. An examination of repondents' other specified reasons shows that some non-innovators may actually be innovative although they do not perceive themselves to be. Innovative and non-innovative plants perceive success factors, such as developing and seeking new markets, in significantly different ways. Non-innovative plants are not expected to be innovative in the near future.

Description:

The paper investigates how Canadian manufacturing plants adjust to an increase in low-wage import competition by changing their commodity portfolios. At the commodity level, we distinguish between 'core' versus 'peripheral' and differentiated versus homogeneous commodities. We also account for cost and technological complementarities using input-output linkages between commodities produced by a plant. We document large commodity turnover within plants over the period from 1988 to 1996. The largest changes happened in multi-commodity plants and involved peripheral commodities. The commodities that were affected the most were those commodities that are potentially used as inputs in production of the 'core' commodity; homogeneous (rather than differentiated) commodities; and, commodities with relatively weak input complementarities with the core product. Plants experiencing large import competition shifted their output toward production of their core commodity and away from production of unrelated peripheral commodities.

Description:

Over the past three decades, tariff barriers have fallen significantly, leading to an increasing integration of Canadian manufactures into world markets and especially the U.S. market. Much attention has been paid to the effects of this shift at the national scale, while little attention has been given to whether these effects vary across regions. In a country that spans a continent, there is ample reason to believe that the effects of trade will vary across regions. In particular, location has a significant effect on the size of markets available to firms, and this may impact the extent to which firms reorganize their production in response to falling trade barriers. Utilizing a longitudinal microdata file of manufacturing plants (1974 to 1999), this study tests the effect of higher levels of trade across regions on the organization of production within plants. The study finds that higher levels of export intensity (exports as a share of output) across regions are positively associated with longer production runs, larger plants and product specialization within plants. These effects are strongest in Ontario and Quebec, provinces that are best situated with respect to the U.S. market.

Description:

This paper investigates the productivity effects of the Canada-United States Free Trade Agreement (FTA) on Canadian manufacturing. It finds that Canadian tariff cuts increased exit rates among moderately productive non-exporting plants. This led to the reallocation of market share toward highly productive plants, which helps explain why aggregate productivity gains were observed when Canadian tariffs were reduced. The paper also finds that all of the within-plant productivity gains resulting from the U.S. tariff cuts involved exporters and, especially, new entrants into the export market. It demonstrates that any lack of output responses and labour-shedding as a consequence of the FTA were experienced by Canadian plants who were non-exporters, while exporters captured the gains from the FTA.

Description:

This study reviews status and trends for the manufacturing sector in 2007. It analyses major regional and industry shifts in production and put them in the context of major socio-economic drivers such as domestic demand and exports. Employment, productivity and profitability indicators are also presented.

Description:

A study of which industries are most reliant on exports for their output, and which import the most inputs.

Description:

This paper examines the presence of knowledge spillovers that affect the adoption of advanced technologies in the Canadian manufacturing sector. It examines whether plants that adopt advanced technologies are more likely to do so when there are other nearby plants that do so within a model of technology adoption.

Description: The survey collected data on production, sales and stocks at the end of the month for these products.

Description: This survey was designed to collect information on current levels of operation. The results, which provided an early indication of trends in the Canadian economy, were used by Industry Measures and Analysis Division as part of the System of National Accounts.

Description: The survey collected data on blast furnace charges (materials used to produce pig iron) and also the tonnages of pig iron produced and shipped each month. As of 1985, this survey was amalgamated with the Steel Primary Forms, Steel Castings and Pig Iron (Survey ID 2116).

Description: The monthly survey, Steel primary forms, Steel castings and Pig iron, measures quantities of selected steel products that are produced and shipped by Canadian manufacturers.

Description: The purpose of this survey is to collect data on the shipments (including imports) of electric lamps (light bulbs and tubes) by the Electric Lamp Bulb and Parts Manufacturing Industry.

Description: This survey is designed to collect information on current levels of operation. The results, which provide an early indication of trends in the Canadian economy, are used extensively by the Canadian Soft Drink Association, food and beverage manufacturers, aluminium manufacturers, and investment houses.

Description: The purpose of this survey is to collect data on the production (number of pairs) of footwear. Data are provided for types of footwear by materials used for uppers and soles.

Description: This survey was a cost-recoverable survey funded by the Canadian Oil Seed Processors Association designed to collect information on current levels of operation. The results, which provide an early indication of trends in the Canadian economy, were used extensively by the association, as well as by food companies and the Canadian Wheat Board.

Description: The main purpose of the survey was to chart the progress (or decline) of the hardboard industry.

Description: This survey was designed to collect information on current levels of operation. The results were used by the System of National Accounts at Statistics Canada to provide an early indication of trends in the Canadian economy, and were used by the Rigid Insulating Board Industry for production and trend analysis.