Analysis

Skip to filters. View results.
View results
Sort Help
entries

Results

All (31)

All (31) (0 to 10 of 31 results)

  • 1. Business Special Surveys and Technology Statistics Division Working Papers
    Journals and periodicals: 88F0006X
    Geography: Canada
    Description:

    Statistics Canada is engaged in the "Information System for Science and Technology Project" to develop useful indicators of activity and a framework to tie them together into a coherent picture of science and technology (S&T) in Canada. The working papers series is used to publish results of the different initiatives conducted within this project. The data are related to the activities, linkages and outcomes of S&T. Several key areas are covered such as: innovation, technology diffusion, human resources in S&T and interrelations between different actors involved in S&T. This series also presents data tabulations taken from regular surveys on research and development (R&D) and S&T and made possible by the project.

    Release date: 2011-12-23
  • 2. Modelling of complex survey data: Why model? Why is it a problem? How can we approach it? Archived
    Articles and reports: 12-001-X201100211602
    Description:

    This article attempts to answer the three questions appearing in the title. It starts by discussing unique features of complex survey data not shared by other data sets, which require special attention but suggest a large variety of diverse inference procedures. Next a large number of different approaches proposed in the literature for handling these features are reviewed with discussion on their merits and limitations. The approaches differ in the conditions underlying their use, additional data required for their application, goodness of fit testing, the inference objectives that they accommodate, statistical efficiency, computational demands, and the skills required from analysts fitting the model. The last part of the paper presents simulation results, which compare the approaches when estimating linear regression coefficients from a stratified sample in terms of bias, variance, and coverage rates. It concludes with a short discussion of pending issues.

    Release date: 2011-12-21
  • 3. A Bayesian analysis of small area probabilities under a constraint Archived
    Articles and reports: 12-001-X201100211603
    Description:

    In many sample surveys there are items requesting binary response (e.g., obese, not obese) from a number of small areas. Inference is required about the probability for a positive response (e.g., obese) in each area, the probability being the same for all individuals in each area and different across areas. Because of the sparseness of the data within areas, direct estimators are not reliable, and there is a need to use data from other areas to improve inference for a specific area. Essentially, a priori the areas are assumed to be similar, and a hierarchical Bayesian model, the standard beta-binomial model, is a natural choice. The innovation is that a practitioner may have much-needed additional prior information about a linear combination of the probabilities. For example, a weighted average of the probabilities is a parameter, and information can be elicited about this parameter, thereby making the Bayesian paradigm appropriate. We have modified the standard beta-binomial model for small areas to incorporate the prior information on the linear combination of the probabilities, which we call a constraint. Thus, there are three cases. The practitioner (a) does not specify a constraint, (b) specifies a constraint and the parameter completely, and (c) specifies a constraint and information which can be used to construct a prior distribution for the parameter. The griddy Gibbs sampler is used to fit the models. To illustrate our method, we use an example on obesity of children in the National Health and Nutrition Examination Survey in which the small areas are formed by crossing school (middle, high), ethnicity (white, black, Mexican) and gender (male, female). We use a simulation study to assess some of the statistical features of our method. We have shown that the gain in precision beyond (a) is in the order with (b) larger than (c).

    Release date: 2011-12-21
  • 4. On bias-robust mean squared error estimation for pseudo-linear small area estimators Archived
    Articles and reports: 12-001-X201100211604
    Description:

    We propose a method of mean squared error (MSE) estimation for estimators of finite population domain means that can be expressed in pseudo-linear form, i.e., as weighted sums of sample values. In particular, it can be used for estimating the MSE of the empirical best linear unbiased predictor, the model-based direct estimator and the M-quantile predictor. The proposed method represents an extension of the ideas in Royall and Cumberland (1978) and leads to MSE estimators that are simpler to implement, and potentially more bias-robust, than those suggested in the small area literature. However, it should be noted that the MSE estimators defined using this method can also exhibit large variability when the area-specific sample sizes are very small. We illustrate the performance of the method through extensive model-based and design-based simulation, with the latter based on two realistic survey data sets containing small area information.

    Release date: 2011-12-21
  • 5. Variance estimation under composite imputation: The methodology behind SEVANI Archived
    Articles and reports: 12-001-X201100211605
    Description:

    Composite imputation is often used in business surveys. The term "composite" means that more than a single imputation method is used to impute missing values for a variable of interest. The literature on variance estimation in the presence of composite imputation is rather limited. To deal with this problem, we consider an extension of the methodology developed by Särndal (1992). Our extension is quite general and easy to implement provided that linear imputation methods are used to fill in the missing values. This class of imputation methods contains linear regression imputation, donor imputation and auxiliary value imputation, sometimes called cold-deck or substitution imputation. It thus covers the most common methods used by national statistical agencies for the imputation of missing values. Our methodology has been implemented in the System for the Estimation of Variance due to Nonresponse and Imputation (SEVANI) developed at Statistics Canada. Its performance is evaluated in a simulation study.

    Release date: 2011-12-21
  • 6. Alternative demographic sample designs being explored at the U.S. Census Bureau Archived
    Articles and reports: 12-001-X201100211606
    Description:

    This paper introduces a U.S. Census Bureau special compilation by presenting four other papers of the current issue: three papers from authors Tillé, Lohr and Thompson as well as a discussion paper from Opsomer.

    Release date: 2011-12-21
  • 7. Adaptive network and spatial sampling Archived
    Articles and reports: 12-001-X201100211607
    Description:

    This paper describes recent developments in adaptive sampling strategies and introduces new variations on those strategies. Recent developments described included targeted random walk designs and adaptive web sampling. These designs are particularly suited for sampling in networks; for example, for finding a sample of people from a hidden human population by following social links from sample individuals to find additional members of the hidden population to add to the sample. Each of these designs can also be translated into spatial settings to produce flexible new spatial adaptive strategies for sampling unevenly distributed populations. Variations on these sampling strategies include versions in which the network or spatial links have unequal weights and are followed with unequal probabilities.

    Release date: 2011-12-21
  • 8. Alternative survey sample designs: Sampling with multiple overlapping frames Archived
    Articles and reports: 12-001-X201100211608
    Description:

    Designs and estimators for the single frame surveys currently used by U.S. government agencies were developed in response to practical problems. Federal household surveys now face challenges of decreasing response rates and frame coverage, higher data collection costs, and increasing demand for small area statistics. Multiple frame surveys, in which independent samples are drawn from separate frames, can be used to help meet some of these challenges. Examples include combining a list frame with an area frame or using two frames to sample landline telephone households and cellular telephone households. We review point estimators and weight adjustments that can be used to analyze multiple frame surveys with standard survey software, and summarize construction of replicate weights for variance estimation. Because of their increased complexity, multiple frame surveys face some challenges not found in single frame surveys. We investigate misclassification bias in multiple frame surveys, and propose a method for correcting for this bias when misclassification probabilities are known. Finally, we discuss research that is needed on nonsampling errors with multiple frame surveys.

    Release date: 2011-12-21
  • 9. Ten years of balanced sampling with the cube method: An appraisal Archived
    Articles and reports: 12-001-X201100211609
    Description:

    This paper presents a review and assessment of the use of balanced sampling by means of the cube method. After defining the notion of balanced sample and balanced sampling, a short history of the concept of balancing is presented. The theory of the cube method is briefly presented. Emphasis is placed on the practical problems posed by balanced sampling: the interest of the method with respect to other sampling methods and calibration, the field of application, the accuracy of balancing, the choice of auxiliary variables and ways to implement the method.

    Release date: 2011-12-21
  • 10. Innovations in survey sampling design: Discussion of three contributions presented at the U.S. Census Bureau Archived
    Articles and reports: 12-001-X201100211610
    Description:

    In this paper, a discussion of the three papers from the US Census Bureau special compilation is presented.

    Release date: 2011-12-21
Stats in brief (1)

Stats in brief (1) ((1 result))

  • 1. Purchasing Power Parities and Real Expenditures, United States and Canada, 2002 to 2009 Archived
    Stats in brief: 13-604-M2010064
    Description:

    This paper provides the latest annual results for the U.S./Canada purchasing power parities (PPPs) and real expenditure indexes in the U.S. compared with Canada for the period 2002 to 2009. Revisions to previously published data and an update using the most recent US and Canada expenditure data from the National Accounts and in-depth price comparisons for 2005 are incorporated. The paper provides a primer on purchasing power parities and related measures and why they are important in international comparisons of economic performance. It also describes a new projection methodology for total economy measures that are now based on Gross Domestic Income and shows the impact of this change on the data.

    Release date: 2011-01-28
Articles and reports (29)

Articles and reports (29) (20 to 30 of 29 results)

  • 21. Replication variance estimation under two-phase sampling Archived
    Articles and reports: 12-001-X201100111448
    Description:

    In two-phase sampling for stratification, the second-phase sample is selected by a stratified sample based on the information observed in the first-phase sample. We develop a replication-based bias adjusted variance estimator that extends the method of Kim, Navarro and Fuller (2006). The proposed method is also applicable when the first-phase sampling rate is not negligible and when second-phase sample selection is unequal probability Poisson sampling within each stratum. The proposed method can be extended to variance estimation for two-phase regression estimators. Results from a limited simulation study are presented.

    Release date: 2011-06-29
  • 22. Cost efficiency of repeated cluster surveys Archived
    Articles and reports: 12-001-X201100111449
    Description:

    We analyze the statistical and economic efficiency of different designs of cluster surveys collected in two consecutive time periods, or waves. In an independent design, two cluster samples in two waves are taken independently from one another. In a cluster-panel design, the same clusters are used in both waves, but samples within clusters are taken independently in two time periods. In an observation-panel design, both clusters and observations are retained from one wave of data collection to another. By assuming a simple population structure, we derive design variances and costs of the surveys conducted according to these designs. We first consider a situation in which the interest lies in estimation of the change in the population mean between two time periods, and derive the optimal sample allocations for the three designs of interest. We then propose the utility maximization framework borrowed from microeconomics to illustrate a possible approach to the choice of the design that strives to optimize several variances simultaneously. Incorporating the contemporaneous means and their variances tends to shift the preferences from observation-panel towards simpler panel-cluster and independent designs if the panel mode of data collection is too expensive. We present numeric illustrations demonstrating how a survey designer may want to choose the efficient design given the population parameters and data collection cost.

    Release date: 2011-06-29
  • 23. On the efficiency of randomized probability proportional to size sampling Archived
    Articles and reports: 12-001-X201100111450
    Description:

    This paper examines the efficiency of the Horvitz-Thompson estimator from a systematic probability proportional to size (PPS) sample drawn from a randomly ordered list. In particular, the efficiency is compared with that of an ordinary ratio estimator. The theoretical results are confirmed empirically with of a simulation study using Dutch data from the Producer Price Index.

    Release date: 2011-06-29
  • 24. The use of estimating equations to perform a calibration on complex parameters Archived
    Articles and reports: 12-001-X201100111451
    Description:

    In the calibration method proposed by Deville and Särndal (1992), the calibration equations take only exact estimates of auxiliary variable totals into account. This article examines other parameters besides totals for calibration. Parameters that are considered complex include the ratio, median or variance of auxiliary variables.

    Release date: 2011-06-29
  • 25. Primary mental health care visits in self-reported data versus provincial administrative records Archived
    Articles and reports: 82-003-X201100211474
    Description:

    This study compares the number of mental health visits reported to the Canadian Community Health Survey: Mental Health with provincial administrative records, using diagnostic codes to identify visits in the administrative data.

    Release date: 2011-06-15
  • 26. Low Income Lines, 2009-2010 Archived
    Articles and reports: 75F0002M2011002
    Description:

    In order to provide a holographic or complete picture of low income, Statistics Canada uses three complementary low income lines: the Low Income Cut-offs (LICOs), the Low Income Measures (LIMs) and the Market Basket Measure (MBM). While the first two lines were developed by Statistics Canada, the MBM is based on concepts developed by Human Resources and Skill Development Canada. Though these measures differ from one another, they give a generally consistent picture of low income status over time. None of these measures is the best. Each contributes its own perspective and its own strengths to the study of low income, so that cumulatively, the three provide a better understanding of the phenomenon of low income as a whole. These measures are not measures of poverty, but strictly measures of low income.

    Release date: 2011-06-15
  • 27. Measuring Voluntary Inter-household Transfers in Canada Archived
    Articles and reports: 75F0002M2011001
    Description:

    Households provide money, goods and services directly to help other households: these inter-household transfers add up to a sizable flow of economic resources between households. While measured by Statistics Canada surveys, inter-household transfers are not included in the recipient household's total income-except court-ordered alimony and child support payments. Because inter-household transfers affect a household's ability to consume goods (Smeeding and Weinburg, 2001), they are important in measuring a household's economic well-being. This paper examines the conceptual and measurement issues related to voluntary inter-household transfers, and provides a portrait of voluntary inter-household transfer in Canada. This paper uses the recent data on inter-household transfers from Statistics Canada's income, expenditure, and wealth surveys.

    Release date: 2011-05-25
  • 28. Psychometric properties, factorial structure, and measurement invariance of the English and French versions of the Medical Outcomes Study social support scale Archived
    Articles and reports: 82-003-X201100211437
    Geography: Canada
    Description:

    This article examines the internal consistency of the English and French versions of the Medical Outcomes Study social support scale for a sample of older adults. The second objective is to conduct a confirmatory factor analysis to assess the factor structure of the English and French versions of the scale. A third purpose is to determine if the items comprising the scale operate in the same way for English- and French-speaking respondents.

    Release date: 2011-05-18
  • 29. Evaluation of the factor structure of the child-reported parenting questionnaire in the National Longitudinal Survey of Children and Youth Archived
    Articles and reports: 82-003-X201100111404
    Geography: Canada
    Description:

    This study assesses three child-reported parenting behaviour scales (nurturance, rejection and monitoring) in the National Longitudinal Survey of Children and Youth.

    Release date: 2011-02-16
Journals and periodicals (1)

Journals and periodicals (1) ((1 result))

  • 1. Business Special Surveys and Technology Statistics Division Working Papers
    Journals and periodicals: 88F0006X
    Geography: Canada
    Description:

    Statistics Canada is engaged in the "Information System for Science and Technology Project" to develop useful indicators of activity and a framework to tie them together into a coherent picture of science and technology (S&T) in Canada. The working papers series is used to publish results of the different initiatives conducted within this project. The data are related to the activities, linkages and outcomes of S&T. Several key areas are covered such as: innovation, technology diffusion, human resources in S&T and interrelations between different actors involved in S&T. This series also presents data tabulations taken from regular surveys on research and development (R&D) and S&T and made possible by the project.

    Release date: 2011-12-23
Report a problem or mistake on this page
Date modified:

Search help

How do I use the filters and the search box?

  • You can initiate a search by entering keywords or selecting filters (e.g., under Subject, Geography, etc.) on the left side of the page.

  • Filters can be used together or in any combination. Each time you select a filter, the results on the page are updated.

  • To start a new search, click on the Clear all button above the search box or deselect each filter.

  • Specified keywords and filters appear above the search box. You can deselect any or all the tags to refine or clear your search.

How do I refine my search?

  • You can enter keywords in the search box. It is not necessary to use “+” or “, “ or “AND”.

  • You can delete some or all of the keywords from your search string.

  • Quotes around keywords limit the search to a specific phrase.

    • For example, “labour force survey” will limit results to products containing this phrase.

  • Use “or” between keywords to obtain results that contain one or more search terms.

    • For example, labour or­ force or survey will limit results to products containing any or all of these words.

How does the search work?

  • This search looks for results that have your query term in the title, description, subject, geography, product number or other information about the product.

    • For example, when searching the term ‘Diseases’, all results with the word ‘Diseases’ in the title, description or tagged the subject appear.

  • The text within an article or publication are not searched. For full text searching of articles, use the site search.

Sort help

How are the results ordered?

The Sort by feature provides three options:

  • By date – sorts results by product release date starting with the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Sort help

How are the results ordered?

The Sort by feature provides four options:

  • By date – sorts results by product release date starting with the most recent.
  • By most popular – gives priority to results that are most frequently selected by users, followed by the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.