Keyword search

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (22 items: Prince Edward Island; Canada; Newfoundland and Labrador; Atlantic provinces ...), Housing estimates (3 items: Housing starts; Housing completions; Housing under construction ...), Type of unit (6 items: Total units; Semi-detached units; Row units; Single-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (86 items: Nova Scotia; Prince Edward Island; Canada; Newfoundland and Labrador ...), Type of dwelling unit (5 items: Total units; Row units; Single units; Semi-detached units ...), Type of market (5 items: Homeowner; Rental; Condo; Co-op ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (37 items: Census metropolitan areas; Abbotsford-Mission, British Columbia; Barrie, Ontario; Brantford, Ontario; ...);  Completed dwelling units (2 items: Absorptions; Unabsorbed inventory);  Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (38 items: All census agglomerations 50;000 and over; Barrie; Ontario; Belleville; Ontario; Abbotsford-Mission; British Columbia ...), Completed dwelling units (2 items: Absorptions; Unabsorbed inventory ...), Type of dwelling unit (3 items: Total units; Single detached units; Semi-detached units ...).

Description:

This table contains data described by the following dimensions (Not all combinations are available): Geography (11 items: Nova Scotia; Prince Edward Island; Newfoundland and Labrador; Canada ...), Housing estimates (3 items: Housing starts; Housing under construction; Housing completions ...), Type of unit (5 items: Total units; Single-detached units; Row units; Semi-detached units ...).

Description: Historical releases of employment and average weekly earnings (including overtime) for all employees by North American Industry Classification System (NAICS), last 5 months.

Description: Historical releases of employment and average weekly earnings (including overtime) for all employees by province, territory and North American Industry Classification System (NAICS), last 5 months.

Description: This table contains 16 series, with data starting from 1946 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), Foreign currency assets and liabilities (16 items: Foreign currency assets; securities; Foreign currency assets; call loans; Total; foreign currency assets; Foreign currency assets; other loans ...).

Description: This table contains 29 series, with data starting from 1953 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Assets and liabilities (29 items: Total assets; Total, Government of Canada, direct and guaranteed securities; Government of Canada, Treasury Bills; Total, Government of Canada, bonds; ...).

Description:

Monthly Canadian manufacturer's sales for 15 census metropolitan areas (CMA) for durable and non-durable goods by North American Industry Classification System (NAICS). Data in thousands of dollars. Unadjusted and seasonally adjusted data available from January 2013 to the current reference month. Not all combinations are available.

Description: Monthly capacity utilization rates for Canadian manufacturers by North American Industry Classification System (NAICS), from January 2017 to the current reference month.

Description: Canadian Sales of goods manufactured (shipments), new orders, unfilled orders, inventories, raw materials, goods or work in process, finished goods, and inventory to sales ratios for durable and non-durable goods by North American Industry Classification System (NAICS) for reference periods January 2002 to the current reference month. Not all combinations are available. Values are in constant dollars.

Description:

Monthly Canadian manufacturers' sales, new orders, unfilled orders, raw materials, goods or work in process, finished goods, total inventories, inventory to sales ratios and finished goods to sales ratios for durable and non-durable goods by North American Industry Classification System (NAICS), in dollars unless otherwise noted. Unadjusted and seasonally adjusted values available from January 1992 to the current reference month.

Description:

Monthly manufacturers' sales, inventories, orders and inventory-to-sales ratios, for motor vehicle and motor vehicle parts manufacturing industries, and motor vehicle body and trailer manufacturing industries, in dollars unless otherwise noted.

Description:

Monthly provincial and territorial manufacturing sales, by North American Industry Classification System (NAICS), data in thousands of dollars. Unadjusted and seasonally adjusted values available from January 1992 to the current reference month. Not all combinations are available.

Description: The Canadian Travel Survey, 1971 was the largest survey on travel of Canadian residents. This paper describes some important aspects of the methodology. Particular emphasis is given to the development of definitions in relation to the methodology, the sampling technique and interview strategy.

Description: J.N.K. Rao (1975) derived a general formula for estimating the variance in multistage sample designs. This general formula extends the previous results by Des Raj (1966) to the case where the conditional variance from a given primary sampling unit is a random variable. The authors reviewed Rao's paper for its application to Horvitz-Thompson and Yates-Grundy variance estimators as well as the variance estimator for the random group method by Rao, Hartley and Cochran (1962). The authors present an altered version of the Yates-Grundy variance estimators as a result of Rao's paper.

Description: This paper focuses on the improvement of sample survey estimates in the particular situation where the survey sample, or part of it, is included in a larger sample from which auxiliary information is available. The properties of a method of estimation - sometimes applied in specific circumstances - are investigated and the limitations of its application are found. The application of the method to rotation designs in continuing surveys is more closely studied in the context of composite estimation.

Description: This paper summarizes the results of a telephone experiment conducted in conjunction with the Canadian Labour Force Survey over the period June 1972 to November 1973. Included in the paper is a detailed outline of the purpose and design of the experiment. A discussion of the impact telephone interviewing had on the cost of enumeration, non-response and participation and unemployment rates is given. In addition, interviewer and respondent attitudes toward telephone interviewing are described. Finally, the paper summarizes the experiences gained from this experiment and indicates some areas where further examinations related to telephone interviewing can be carried out.

Description: A ratio estimate based on an auxiliary variable is considered for the case when the sample is post-stratified using information on another auxiliary variable. The variance of the ratio estimate is derived by the method of linearization [3,4]. An application to subprovincial estimation in the Canadian Labour Force Survey is discussed.

Description: Most sample surveys in the past have been "descriptive" in the sense that the main objective is the computation of means or totals of a number of characters of interest along with their standard errors. However, in recent years data produced from "descriptive" surveys are also being increasingly used for "analytical" purposes, i.e., for investigating relationships among variables. Also some sample surveys might have primary "analytical goals" in which case the "optimal" designing of such "analytical surveys" becomes important.

These lecture notes present an account of some recent developments in the analytical studies of sample survey data. Many challenging problems remain to be solved and I hope these notes will provide stimulation for further research in this important area.

Description:

Madow [1968] has proposed a two-phase sampling scheme under which response bias can be eliminated from sample surveys by obtaining “true” values for a subsample of the original sample. Often in cases of Censuses or ongoing surveys, the subsample data are not used to correct the main survey estimates but to assess their reliability. The main purpose of this paper is to present methods by which reliability estimates can be obtained when true values can be determined for a subsample of units.

Description:

Random rounding is a technique to ensure confidentiality of aggregate statistics. By randomly rounding all the components of a total, independently, together with the random rounding of the total itself, substantial discrepancies may arise when aggregating the published data. This paper presents a procedure which avoids substantial discrepancies while still protecting the concept of confidentiality.

Description: Although a survey is designed to satisfy a specific set of survey constraints, some steps involved in designing a survey, such as stratification, sample allocation and sample selection are common to all surveys. The steps involved in the creation of survey design systems are to identify, develop and implement common methods and procedures for such stages which, when taken together, constitute a survey design. The paper describes some methodological considerations in the development of an automated system for three methods of ratio estimation.

Description: In 1962, Hartley and Rao derived an asymptotic formula for the joint probability selection for samples selected with unequal probability sampling. In 1966, Connor, derived an exact formula for this joint probability, however, his formulae were very involved. In the present paper the authors, using a modification of Connor's formula derive the exact joint probabilities using a specially designed computer algorithm.

Description: The Analytical Studies and Modelling Branch is the research (ASMB), modelling, training and access hub of Statistics Canada. It focuses on leveraging the agency’s vast data holdings to generate in-depth insights that support evidence-based policy making and to enable others to do so through analytical training and data access. The ASMB, like other program areas in the agency, works to support Statistics Canada’s overall mission of delivering insights through data for a better Canada.

Description: To stay relevant, preparing for a new Census of Agriculture requires a thorough evaluation of data requirements. Before each census, Statistics Canada conducts consultations to solicit input and feedback on the Census of Agriculture's content. This report describes those consultations and the process that was followed to test and determine which topics could be potentially retained for the next census.

Description: This product contains specifications intended for users of the urban greenness geospatial files. This document provides important technical information for users and links to methodology.

Description: The Coverage Technical Report will present the errors included in census data that result from persons who are either missed (not enumerated) or enumerated more than once. The population coverage error is one of the most important types of errors because it affects the accuracy of not only population counts, but also all the census data results that describe the characteristics of the population universe.

Description: This product contains gridded datasets of annual and 30-year average estimates of water yield. Tracking water yield—an estimate of renewable water supply derived from National Water Data Archive (HYDAT) streamflow data—provides information to help understand water resources available for human use and ecosystem needs. Annual datasets are available for the years 1971 to 2021 and cover southern Canada. Thirty-year averages are available for 1971-2000, 1981-2010, and 1991-2020. They cover the terrestrial and freshwater extent of Canada, except for the Arctic Archipelago.

Description: This product contains specifications intended for users of the water yield geospatial files. This document provides important technical information for users and links to methodology.

Description: This guide is intended to provide a detailed review of both the 2022 IPS and IPS–NIS with respect to subject matter and methodological approaches. It is designed to help data users by serving as a guide to the concepts and measures of the survey as well as the technical details of the survey’s design, field work and data processing. This guide is meant to provide users with helpful information on how to use and interpret survey results. The discussion on data quality also allows users to review the strengths and limitations of the data for their particular needs.

Chapter 1 of this guide provides an overview of the 2022 IPS and IPS–NIS by introducing the survey background and objectives. Chapter 2 outlines the survey’s themes and explains the key concepts and definitions used for the survey. Chapters 3 to 6 cover important aspects of the survey methodology, sampling design, data collection and processing. Chapters 7 and 8 review issues of data quality and caution users about comparing 2022 IPS or IPS–NIS data with data from other sources. Chapter 9 outlines the survey products available to the public, including data tables, analytical articles and reference material. The appendices provide a comprehensive list of survey indicators, extra coding categories and standard classifications used on both the IPS and the IPS–NIS. Lastly, a glossary of survey terms and information on confidence intervals is also provided.

Description: The Guide to Employment Insurance Statistics (EIS) summarizes the survey methodology and data source and includes a dictionary of concepts and definitions used by the program.

Description: This video is part of a series that is designed to give you a basic understanding of the Census of Population web pages. This video will provide an overview of the major links and products on the main page that are available to all users.

Description: This video is part of a series that is designed to give you a basic understanding of the Census of Population web pages. The purpose of this video is to explain where to find the most popular standard data product of the Census of Population, the 2021 Census Profile, and how to filter the data.