Geography - Find information by region or area

Skip to filters. View results.

View results

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Subject

Type

13 facets displayed. 0 facets selected.

Survey or statistical program

407 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries
For boundary files and other geographic reference, see Geographic files and documentation.

Results

All (26,494)

All (26,494) (0 to 10 of 26,494 results)

  • 1. Geographic variation in female breast cancer incidence and mortality in Canada - Open in new window/tab
    Articles and reports: 82-003-X202600500001
    Description: Previous research has found variability in cancer incidence and cancer-related outcomes according to place of residence. This study examined geographic variability in the incidence and mortality of breast cancer among females in Canada, using data from the 2021 Canadian Cancer Registry (breast cancer incidence) and the Canadian Vital Statistics – Death database (breast cancer mortality). Age-standardized incidence rates (ASIRs) and age-standardized mortality rates (ASMRs) per 100,000 females per year and their rate ratios were calculated, as well as age group-specific and age-standardized stage-specific incidence rates, and examined across provinces and territories, community sizes, and peer groups (i.e., clusters of health regions with similar socioeconomic and demographic characteristics).
    Release date: 2026-05-20
  • 2. Enhancing the OncoSim-Breast model using Canadian breast density information - Open in new window/tab
    Articles and reports: 82-003-X202600500002
    Description: Breast cancer is the most commonly diagnosed cancer among women in Canada. Breast density substantially influences breast cancer risk and mammography performance. However, OncoSim-Breast, a Canadian microsimulation model representing breast cancer control, including cancer onset, screening, and survival, has not previously explicitly accounted for breast density. This study describes the incorporation of density-specific parameters—prevalence, relative risk of breast cancer, and digital mammography performance (sensitivity and specificity)—using data from five Canadian provinces, into the OncoSim-Breast model. Calibration experiments and internal validations were conducted to ensure the updated OncoSim-Breast model aligned with observed data from the Canadian Cancer Registry.
    Release date: 2026-05-20
  • 3. Preterm births among mothers from racialized groups, 2016-2021 - Open in new window/tab
    Articles and reports: 82-625-X202600100001
    Description: This is a health fact sheet about preterm births among mothers from racialized groups. This analysis includes live births from the five-year period preceding the 2021 Census.
    Release date: 2026-05-20
  • 4. Income Research Paper Series - Open in new window/tab
    Journals and periodicals: 75F0002M
    Description: This series provides detailed documentation on income developments, including survey design issues, data quality evaluation and exploratory research.
    Release date: 2026-05-20
  • 5. Health Reports - Open in new window/tab
    Journals and periodicals: 82-003-X
    Geography: Canada
    Description:

    Health Reports, published by the Health Analysis and Modelling Division of Statistics Canada, is a peer-reviewed journal of population health and health services research. It is designed for a broad audience that includes health professionals, researchers, policymakers, and the general public. The journal publishes articles of wide interest that contain original and timely analyses of national or provincial/territorial surveys or administrative databases. New articles are published electronically each month.

    Health Reports had an impact factor of 3.3 for 2024 and a five-year impact factor of 4.4. All articles are indexed in PubMed. Our online catalogue is free and receives more than 700,000 visits per year. External submissions are welcome.
    Release date: 2026-05-20
  • 6. Health Fact Sheets - Open in new window/tab
    Journals and periodicals: 82-625-X
    Geography: Canada
    Description: Health fact sheets will include short, focused, single-theme analysis documents. Over the course of the series, analysis will include topics on: Health conditions, lifestyle, well-being, disability, prevention and detection of disease, deaths, pregnancy and birth, health care services and environmental factors.
    Release date: 2026-05-20
  • 7. Consumer Price Index (CPI) statistics, alternative measures, unadjusted and seasonally adjusted, Bank of Canada - Open in new window/tab
    Table: 10-10-0106-01
    Geography: Canada
    Frequency: Monthly
    Description: This table contains 18 series, with data starting from 1979 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Alternative measures (18 items: Consumer Price Index (CPI) excluding food; energy and the effect of indirect taxes; seasonally adjusted; Consumer Price Index (CPI) excluding the effect of indirect taxes; seasonally adjusted; Consumer Price Index (CPI) excluding the effect of indirect taxes; Consumer Price Index (CPI) excluding food; energy and the effect of indirect taxes ...).
    Release date: 2026-05-20
  • 8. Bank of Canada, money market and other interest rates - Open in new window/tab
    Table: 10-10-0139-01
    Geography: Canada
    Frequency: Daily
    Description: This table contains 39 series, with data for starting from 1991 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Financial market statistics (39 items: Government of Canada Treasury Bills, 1-month (composite rates); Government of Canada Treasury Bills, 2-month (composite rates); Government of Canada Treasury Bills, 3-month (composite rates);Government of Canada Treasury Bills, 6-month (composite rates); ...).
    Release date: 2026-05-20
  • 9. Credit liabilities of households - Open in new window/tab
    Table: 36-10-0639-01
    Geography: Canada
    Frequency: Monthly
    Description:

    Monthly credit aggregates for the household sector, by category.

    Release date: 2026-05-20
  • 10. Credit liabilities of private non-financial corporations - Open in new window/tab
    Table: 36-10-0640-01
    Geography: Canada
    Frequency: Monthly
    Description:

    Monthly credit aggregates for the private non-financial corporations sector, by category.

    Release date: 2026-05-20
Data (13,239)

Data (13,239) (20 to 30 of 13,239 results)

Analysis (10,756)

Analysis (10,756) (10,680 to 10,690 of 10,756 results)

  • 10,681. Commissioning research - The business relationship - Open in new window/tab Archived
    Articles and reports: 12-001-X198000254950
    Description: The government survey sponsor should plan carefully what he expects to get from the supplier, specifying who is to do what, when, including details of what the sponsor will do. If there are many eligible suppliers, only a small number should be invited to submit proposals, increasing as the value of the contract increases. Procedures for screening suppliers and selecting the successful one should be organized before proposals are received. These should include visits to review suppliers, facilities and organization, as a good relationship between a sponsor and a supplier depends largely on good faith and willing cooperation. Sponsor-supplier relationships are more formal, and more time-consuming in the selection process, than in the private sector.
    Release date: 1980-12-15
  • 10,682. Serving the needs of the user - Open in new window/tab Archived
    Articles and reports: 12-001-X198000254951
    Description: Various research methods are discussed in terms of evaluating government programs and meeting the needs of users in the private sector. A brief evaluation of social trend studies is given, as well as a description of problems associated with consumer research.
    Release date: 1980-12-15
  • 10,683. Non-textbook problems in the revision of a business based employment survey - Open in new window/tab Archived
    Articles and reports: 12-001-X198000154834
    Description:

    The paper illustrates several practical problems in the adaptation of statistical theory to survey design in the context of the revision of an employment survey programme.

    Release date: 1980-06-16
  • 10,684. Reverse record check: Tracing people in Canada - Open in new window/tab Archived
    Articles and reports: 12-001-X198000154835
    Description:

    The Reverse Record Check is the main vehicle used to assess the level of undercoverage in the Canadian Census of Population. A sample of persons is selected from sources independent of the current census and extensive tracing operations are undertaken to determine the usual address of each selected person as of Census day. Census records are then checked to determine whether or not each selected person was enumerated. The tracing is by far the most complex, costly and time-consuming operation associated with this study. It involves extensive use of administrative records as well as tracing in the field. This paper describes the various tracing methods used as well as the success obtained from each of them.

    Release date: 1980-06-16
  • 10,685. Comparison of some ratio type estimators for large scale household surveys - Open in new window/tab Archived
    Articles and reports: 12-001-X198000154836
    Description: In this paper three types of ratio estimators, namely combined, post-stratified and a generalized ratio estimator developed earlier by Singh (1969) and Naga Reddy (1974), are considered. Based on an empirical evaluation, their efficiencies are compared for two large scale household surveys, namely the Canadian Labour Force Survey and the Survey of Consumer Finances.
    Release date: 1980-06-15
  • 10,686. Sample design of the Monthly Restaurants, Caterers and Taverns Survey - Open in new window/tab Archived
    Articles and reports: 12-001-X198000154837
    Description: Statistics on sales of establishments classified as restaurants, caterers and taverns have been collected since 1951. The sample has not been updated for births since 1968 and as a result, it is not representative of the current universe. This paper reports on several methodological aspects of the redesign. The sampling unit, sample design, sample size and allocation, data collection methods, edits and imputations, accumulations and calculations, frame and sample maintenance are described. The new survey will reduce manual procedures wherever possible. Collection, editing, imputation, tabulation and updating procedures will be completely computerized. Data collection will be decentralized and will take place via telephone.
    Release date: 1980-06-15
  • 10,687. 1979 Farm Expenditure Survey design and estimation procedures - Open in new window/tab Archived
    Articles and reports: 12-001-X198000154838
    Description: The Farm Expenditure Survey was developed to provide annual expenditure estimates for the Western Grain Stabilization Act which is an income stabilization program for grain farmers in the prairies and Peace River district of British Columbia. This paper describes the design of the 1979 survey which incorporated a stratified two-stage design in the area sample and a single take-all stratum in the list sample.
    Release date: 1980-06-15
  • 10,688. Sampling with unequal probabilities and without replacement - A rejective method - Open in new window/tab Archived
    Articles and reports: 12-001-X197900254834
    Description: An alternative to the direct selection of sample is suggested, which while retaining the efficiency at the same level simplifies the selection and variance estimation processes in a wide variety of situations. If n* is the largest feasible pPS sample size that can be drawn from a given population of size N, then the proposed method entails selection of m (=N - n*) units using a pPS scheme and rejecting these units from the population such that the remainder is a pPS sample of n* units; the final sample of n units is then selected as a subsample from the remainder set. This method for selecting the pPS sample can be seen as an analogue of SRS where it is well known that the “unsampled” part of the population as well as any subsample from this part are also SRS from the entire population when SRS is the procedure used. The method is very practical for situations where m is less than the actual sample size n. Moreover, the method has the additional advantage in the context of continuing surveys, e.g. Canadian Labour Force Survey (LFS), where the number of primary sampling units (PSU’s) may have to be increased (or decreased) subsequent to the initial selection of the sample. The method also has advantages in the case of sample rotation. Main features of the proposed scheme and its limitations are given. Efficiency of the method is also evaluated empirically.
    Release date: 1979-12-15
  • 10,689. Test of multiple frame sampling techniques for agricultural surveys: New Brunswick, 1978 - Open in new window/tab Archived
    Articles and reports: 12-001-X197900254835
    Description: The problem considered in this paper is the estimation of various agricultural variables using a multiple frame approach. The list frame is completely contained within the area frame. The stratification for the list and area frames are based on different criteria. Overall, the multiple frame shows some gains in terms of variance over the area frame. However, a more careful analysis reveals problem areas associated with the list frame such as the method of stratification and the degeneration of list strata over time.
    Release date: 1979-12-15
  • 10,690. Canadian victimization surveys: A report on pretests in Edmonton and Hamilton - Open in new window/tab Archived
    Articles and reports: 12-001-X197900254836
    Description: This article presents the methodology and analysis of two major pretests undertaken in order to compare the effectiveness of different interviewing methods and to assess the feasibility of collecting information which would meet Victimization Survey information requirements.
    Release date: 1979-12-15
Reference (2,027)

Reference (2,027) (10 to 20 of 2,027 results)

  • 11. Population Projections for Canada (2025 to 2075), Provinces and Territories (2025 to 2050): Technical Report on Methodology and Assumptions - Open in new window/tab
    Surveys and statistical programs – Documentation: 17-20-00032026002
    Description: This report aims to describe the methods used for the calculation of projection parameters, the various projection assumptions and their rationales.
    Release date: 2026-01-27
  • 12. Canadian Food Environment Dataset: A New Pan-Canadian Dataset of Retail Food Environment Measures - Open in new window/tab
    Surveys and statistical programs – Documentation: 13-20-0001
    Description: The Canadian Food Environment Dataset (Can-FED) is a pan-Canadian dataset of retail food environment measures at the dissemination area (DA) level based on food outlet data from the Statistics Canada Business Register.
    Release date: 2025-12-19
  • 13. Canadian Food Environment Dataset: User Guide - Open in new window/tab
    Surveys and statistical programs – Documentation: 13-20-00012025002
    Description: This user guide contains supporting documentation for the Canadian Food Environment Dataset (Can-FED). Can-FED is a pan-Canadian dataset of retail food environment measures at the dissemination area level based on food outlet data from the 2024 Statistics Canada Business Register.
    Release date: 2025-12-19
  • 14. Technical Reference Guides for the Education and Labour Market Longitudinal Platform (ELMLP) - Open in new window/tab
    Surveys and statistical programs – Documentation: 37-20-0001
    Description: These reference guides are intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The guide provides an overview of the Postsecondary Student Information System (PSIS) and the Registered Apprenticeship Information System (RAIS), the general methodology used to create longitudinal indicators, and important technical information for users.
    Release date: 2025-12-17
  • 15. Persistence and graduation indicators of postsecondary students, 2011/2012 to 2023/2024 - Open in new window/tab
    Surveys and statistical programs – Documentation: 37-20-00012025003
    Description: This technical reference guide is intended for users of the Education and Labour Market Longitudinal Platform (ELMLP). The data for the products associated with this issue are based on the longitudinal Postsecondary Student Information System (PSIS) administrative data files. Statistics Canada has derived a series of annual indicators of public postsecondary students including persistence rates, graduation rates, and average time to graduation by educational qualification, field of study, age group and gender for Canada, the provinces, and the three combined Territories.
    Release date: 2025-12-17
  • 16. Technical Guide on Demographic Estimates at Statistics Canada - Open in new window/tab
    Surveys and statistical programs – Documentation: 91-528-X
    Description: The Technical Guide on Demographic Estimates at Statistics Canada provides detailed descriptions of the most current data sources and methods used by the Centre for demography at Statistics Canada to produce demographic estimates as part of the Demographic estimates program. They comprise postcensal and intercensal population estimates; base population; births and deaths; immigrants; emigrants; returning emigrants; non-permanent residents; interprovincial migration; subprovincial estimates of population and intraprovincial migration; population estimates by age and gender; and census family estimates. A glossary of commonly used terms is available at the end of the guide.
    Release date: 2025-12-17
  • 17. Technical Guide for the Telecommunications Services Producer Price Indexes - Open in new window/tab
    Surveys and statistical programs – Documentation: 62F0014M2025008
    Description: This technical guide describes the methodological details for the  Telecommunications Services Producer Price Indexes (TSPPI). The document includes information about the purpose of the index, index coverage, data source and availability, pricing methodology, and limitations.
    Release date: 2025-12-17
  • 18. Longitudinal Immigration Database (IMDB) Technical Report, 2024 - Open in new window/tab
    Surveys and statistical programs – Documentation: 11-633-X2025004
    Description: The Longitudinal Immigration Database (IMDB) is a comprehensive source of data that plays a key role in the understanding of the economic behaviour of immigrants. It is the only annual Canadian dataset that allows users to study the characteristics of immigrants to Canada at the time of admission and their economic outcomes and regional (inter-provincial) mobility over a time span of more than 40 years.
    Release date: 2025-12-08
  • 19. Canadian Export Classification - Open in new window/tab
    Classification: 65-209-X
    Description: The Canadian Export Classification is a structured, hierarchical classification system based on the Harmonized Description and Coding System. The HS nomenclature is divided into 21 Sections, which in general, group goods produced in the same sector of the economy.
    Release date: 2025-12-04
  • 20. The Guide to the Post Index - Open in new window/tab
    Surveys and statistical programs – Documentation: 62F0072G
    Description: The Post Indexes are a collection of spatial price indexes for Government of Canada staff posted abroad that compare the cost of purchasing a fixed basket of goods and services between the post locations and Ottawa. These indexes are constructed as part of Foreign Service Directive 55.
    Release date: 2025-11-25
Other (1)

Other (1) ((1 result))

  • 1. Data Visualization: Best Practices - Open in new window/tab
    89-26-0005
    Description: This document provides best practices in data visualization for basic charts. A data visualization product can be created with very different goals and for different audiences with a wide range of expertise. General information applicable to any data visualization product is provided, as well as detailed information for data visualization by chart. This report covers 5 different categories of charts, and presents graphs from the following 5 general categories: pie charts, bar charts, point charts, line charts and maps.
    Release date: 2023-02-24

Sort Help

How are the results ordered?

The Sort by feature provides four options:

  • By date – sorts results by product release date starting with the most recent.
  • By most popular – gives priority to results that are most frequently selected by users, followed by the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Sort Help

How are the results ordered?

The Sort by feature provides three options:

  • By date – sorts results by product release date starting with the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Search Help

How do I use the filters and the search box?

  • You can initiate a search by entering keywords or selecting filters (e.g., under Subject, Geography, etc.) on the left side of the page.

  • Filters can be used together or in any combination. Each time you select a filter, the results on the page are updated.

  • To start a new search, click on the Clear all button above the search box or deselect each filter.

  • Specified keywords and filters appear above the search box. You can deselect any or all the tags to refine or clear your search.

How do I refine my search?

  • You can enter keywords in the search box. It is not necessary to use “+” or “, “ or “AND”.

  • You can delete some or all of the keywords from your search string.

  • Quotes around keywords limit the search to a specific phrase.

    • For example, “labour force survey” will limit results to products containing this phrase.

  • Use “or” between keywords to obtain results that contain one or more search terms.

    • For example, labour or­ force or survey will limit results to products containing any or all of these words.

How does the search work?

  • This search looks for results that have your query term in the title, description, subject, geography, product number or other information about the product.

    • For example, when searching the term ‘Diseases’, all results with the word ‘Diseases’ in the title, description or tagged the subject appear.

  • The text within an article or publication are not searched. For full text searching of articles, use the site search.

Date modified: