Keyword search
Filter results by
Search HelpKeyword(s)
Subject
Year of publication
Survey or statistical program
Portal
Results
All (23)
All (23) (0 to 10 of 23 results)
- Articles and reports: 11F0019M2020001Description:
Multifactor productivity (MFP) declined in Canada from 2000 to 2009 and then recovered after. The movements in productivity since 2000 have attracted great attention from researchers and policy makers because productivity is important both for economic growth and for improvements in living standards. This paper applies the stochastic frontier framework to decompose each firm’s MFP into two parts: its technological frontier and its technical efficiency. Change in the aggregate technological frontier refers to improvements in the productivity potential of an economy, i.e., the maximum productivity of an economy if all firms are fully efficient. Aggregate technical efficiency reflects the economy’s capacity to achieve that potential. The results of this decomposition can show whether the movements in productivity after 2000 in Canada were mainly the result of changes in the technological frontier and productivity potential or of changes in the technical efficiency.
Release date: 2020-01-17 - 2. Environmentally Adjusted Multifactor Productivity Growth for the Canadian Manufacturing Sector ArchivedArticles and reports: 11F0019M2019013Description: The need to measure both the desirable outputs (goods and services) and the undesirable outputs (emissions of greenhouse gases [GHGs] and criteria air contaminants [CACs]) from economic activity is becoming increasingly important as economic performance and environmental performance become ever more intertwined. Standard measures of multifactor productivity (MFP) growth provide insights into rising standards of living and the performance of economies, but they may be misleading if only desirable outputs are considered. This study presents estimates of environmentally adjusted multifactor productivity (EAMFP) growth using a new comprehensive database. This database contains information on GHG and CAC emissions, as well as on the production activities of Canadian manufacturers.Release date: 2019-05-08
- Articles and reports: 11F0019M2018409Description:
Labour productivity growth and multifactor productivity (MFP) growth slowed in Canada and other advanced economies after 2000. Several measurement challenges have been suggested as potential explanations for this trend. These include the measurement of intangible capital in a digital economy, the measurement of natural resource capital in the resource extraction sectors, the effect of infrastructure capital and the effect of cyclical fluctuations in the utilization of capital in industries adversely affected by world demand. This paper focuses on the role of these measurement issues in the slower productivity growth observed in Canada.
Release date: 2018-10-29 - Articles and reports: 11F0019M2015372Description: This paper presents a growth accounting framework in which subsoil mineral and energy resources are recognized as natural capital input into the production process. It is the first study of its kind in Canada. Firstly, the income attributable to subsoil resources, or resource rent, is estimated as a surplus value after all extraction costs and normal returns on produced capital have been accounted for. The value of a resource reserve is then estimated as the present value of the future resource rents generated from the efficient extraction of the reserve. Lastly, with extraction as the observed service flows of natural capital, multifactor productivity (MFP) growth and the other sources of economic growth can be reassessed by updating the income shares of all inputs, and then, by estimating the contribution to growth coming from changes in the value of natural capital input. This framework is then applied to the Canadian oil and gas extraction sector.Release date: 2015-12-14
- Articles and reports: 11F0027M2015097Description:
Canada’s aggregate productivity performance has closely tracked changes in Canada’s trading environment. To gain a better understanding of the link, the Economic Analysis Division of Statistics Canada has conducted a set of studies that investigate whether and how changes in the trading environment, brought about by trade liberalization policies and exchange-rate movements, contributed to productivity growth. The firm-level analysis provides insights into the productivity dynamics that arise from within-industry growth and restructuring as resources are shifted from declining to growing industries. The paper provides an overview of the key Canadian empirical findings over the last two decades.
Release date: 2015-06-16 - Articles and reports: 15-206-X2014038Description:
This paper provides an overview of the productivity program at Statistics Canada and a brief description of Canada’s productivity performance. The paper defines productivity and the various measures that are used to investigate different aspects of productivity growth. It describes the difference between partial productivity measures (such as labour productivity) and a more complete measure (multifactor productivity) and the advantages and disadvantages of each. The paper explains why productivity is important. It outlines how productivity growth fits into the growth accounting framework and how this framework is used to examine the various sources of economic growth. The paper briefly discusses the challenges that face statisticians in measuring productivity growth. It also provides an overview of Canada’s long-term productivity performance and compares Canada to the United States—both in terms of productivity levels and productivity growth rates.
Release date: 2014-09-15 - Articles and reports: 15-206-X2014037Description:
This paper presents estimates of effective multifactor productivity (MFP) growth for Canada, the United States, Australia, Japan and selected European Union (EU) countries, based on the EU KLEMS productivity database and the World Input-Output Tables. Effective MFP growth captures the impact of the productivity gains in upstream industries on the productivity growth and international competitiveness of domestic industries, thereby providing an appropriate measure of productivity growth and international competitiveness in the production of final demand products such as consumption, investment and export products. A substantial portion of MFP growth, especially for small, open economies such as Canada’s, is attributable to gains in the production of intermediate inputs in foreign countries. Productivity growth tends to be higher in investment and export products than for the production of consumption products. Technical progress and productivity growth in foreign countries have made a larger contribution to production growth in investment and export products than in consumption products. The analysis provides empirical evidence consistent with the hypothesis that effective MFP growth is a more informative relevant indicator of international competitiveness than is standard MFP growth.
Release date: 2014-09-09 - Articles and reports: 15-206-X2014035Description:
This paper highlights revisions to multifactor productivity (MFP) growth and related variables in the business sector and in individual industries, which resulted from the historical revision of the Canadian System of National Accounts (CSNA) released October 1, 2012, revisions to the labour productivity accounts released October 12, 2012, and changes in the estimation of capital input that were made in order to improve its consistency in industry MFP growth estimates.
The multifactor productivity program produces indexes of MFP and related measures (output, capital input, labour input and intermediate inputs) for the business sector, broad economic sub-sectors, and their constituent industries. The MFP program divides growth in labour productivity into its key determinants: capital intensity (changes in capital per hour worked), investment in human capital, and MFP, which includes technological change, organizational innovation and economies of scale.
Release date: 2014-07-08 - Articles and reports: 11-626-X2013031Geography: CanadaDescription:
This article in the Economic Insights series reports the impact of correcting for variations in capacity utilization on multifactor productivity growth in Canadian business industries. It is based on a recently released Statistics Canada research paper. Results show that multifactor productivity growth is procyclical for almost all business industries, and that such pro-cyclicality largely reflects variations in capacity utilization in some industries, especially in manufacturing and mining.
Release date: 2013-10-04 - Articles and reports: 15-206-X2009025Description:
Baldwin and Gu (2008) provide an overview of the productivity program at Statistics Canada and a brief description of Canada's productivity performance. This paper provides an update of Canada's productivity performance in more recent years and analyses the sources of weak productivity performance in Canada since 2000.
Release date: 2009-08-04
Data (0)
Data (0) (0 results)
No content available at this time.
Analysis (23)
Analysis (23) (0 to 10 of 23 results)
- Articles and reports: 11F0019M2020001Description:
Multifactor productivity (MFP) declined in Canada from 2000 to 2009 and then recovered after. The movements in productivity since 2000 have attracted great attention from researchers and policy makers because productivity is important both for economic growth and for improvements in living standards. This paper applies the stochastic frontier framework to decompose each firm’s MFP into two parts: its technological frontier and its technical efficiency. Change in the aggregate technological frontier refers to improvements in the productivity potential of an economy, i.e., the maximum productivity of an economy if all firms are fully efficient. Aggregate technical efficiency reflects the economy’s capacity to achieve that potential. The results of this decomposition can show whether the movements in productivity after 2000 in Canada were mainly the result of changes in the technological frontier and productivity potential or of changes in the technical efficiency.
Release date: 2020-01-17 - 2. Environmentally Adjusted Multifactor Productivity Growth for the Canadian Manufacturing Sector ArchivedArticles and reports: 11F0019M2019013Description: The need to measure both the desirable outputs (goods and services) and the undesirable outputs (emissions of greenhouse gases [GHGs] and criteria air contaminants [CACs]) from economic activity is becoming increasingly important as economic performance and environmental performance become ever more intertwined. Standard measures of multifactor productivity (MFP) growth provide insights into rising standards of living and the performance of economies, but they may be misleading if only desirable outputs are considered. This study presents estimates of environmentally adjusted multifactor productivity (EAMFP) growth using a new comprehensive database. This database contains information on GHG and CAC emissions, as well as on the production activities of Canadian manufacturers.Release date: 2019-05-08
- Articles and reports: 11F0019M2018409Description:
Labour productivity growth and multifactor productivity (MFP) growth slowed in Canada and other advanced economies after 2000. Several measurement challenges have been suggested as potential explanations for this trend. These include the measurement of intangible capital in a digital economy, the measurement of natural resource capital in the resource extraction sectors, the effect of infrastructure capital and the effect of cyclical fluctuations in the utilization of capital in industries adversely affected by world demand. This paper focuses on the role of these measurement issues in the slower productivity growth observed in Canada.
Release date: 2018-10-29 - Articles and reports: 11F0019M2015372Description: This paper presents a growth accounting framework in which subsoil mineral and energy resources are recognized as natural capital input into the production process. It is the first study of its kind in Canada. Firstly, the income attributable to subsoil resources, or resource rent, is estimated as a surplus value after all extraction costs and normal returns on produced capital have been accounted for. The value of a resource reserve is then estimated as the present value of the future resource rents generated from the efficient extraction of the reserve. Lastly, with extraction as the observed service flows of natural capital, multifactor productivity (MFP) growth and the other sources of economic growth can be reassessed by updating the income shares of all inputs, and then, by estimating the contribution to growth coming from changes in the value of natural capital input. This framework is then applied to the Canadian oil and gas extraction sector.Release date: 2015-12-14
- Articles and reports: 11F0027M2015097Description:
Canada’s aggregate productivity performance has closely tracked changes in Canada’s trading environment. To gain a better understanding of the link, the Economic Analysis Division of Statistics Canada has conducted a set of studies that investigate whether and how changes in the trading environment, brought about by trade liberalization policies and exchange-rate movements, contributed to productivity growth. The firm-level analysis provides insights into the productivity dynamics that arise from within-industry growth and restructuring as resources are shifted from declining to growing industries. The paper provides an overview of the key Canadian empirical findings over the last two decades.
Release date: 2015-06-16 - Articles and reports: 15-206-X2014038Description:
This paper provides an overview of the productivity program at Statistics Canada and a brief description of Canada’s productivity performance. The paper defines productivity and the various measures that are used to investigate different aspects of productivity growth. It describes the difference between partial productivity measures (such as labour productivity) and a more complete measure (multifactor productivity) and the advantages and disadvantages of each. The paper explains why productivity is important. It outlines how productivity growth fits into the growth accounting framework and how this framework is used to examine the various sources of economic growth. The paper briefly discusses the challenges that face statisticians in measuring productivity growth. It also provides an overview of Canada’s long-term productivity performance and compares Canada to the United States—both in terms of productivity levels and productivity growth rates.
Release date: 2014-09-15 - Articles and reports: 15-206-X2014037Description:
This paper presents estimates of effective multifactor productivity (MFP) growth for Canada, the United States, Australia, Japan and selected European Union (EU) countries, based on the EU KLEMS productivity database and the World Input-Output Tables. Effective MFP growth captures the impact of the productivity gains in upstream industries on the productivity growth and international competitiveness of domestic industries, thereby providing an appropriate measure of productivity growth and international competitiveness in the production of final demand products such as consumption, investment and export products. A substantial portion of MFP growth, especially for small, open economies such as Canada’s, is attributable to gains in the production of intermediate inputs in foreign countries. Productivity growth tends to be higher in investment and export products than for the production of consumption products. Technical progress and productivity growth in foreign countries have made a larger contribution to production growth in investment and export products than in consumption products. The analysis provides empirical evidence consistent with the hypothesis that effective MFP growth is a more informative relevant indicator of international competitiveness than is standard MFP growth.
Release date: 2014-09-09 - Articles and reports: 15-206-X2014035Description:
This paper highlights revisions to multifactor productivity (MFP) growth and related variables in the business sector and in individual industries, which resulted from the historical revision of the Canadian System of National Accounts (CSNA) released October 1, 2012, revisions to the labour productivity accounts released October 12, 2012, and changes in the estimation of capital input that were made in order to improve its consistency in industry MFP growth estimates.
The multifactor productivity program produces indexes of MFP and related measures (output, capital input, labour input and intermediate inputs) for the business sector, broad economic sub-sectors, and their constituent industries. The MFP program divides growth in labour productivity into its key determinants: capital intensity (changes in capital per hour worked), investment in human capital, and MFP, which includes technological change, organizational innovation and economies of scale.
Release date: 2014-07-08 - Articles and reports: 11-626-X2013031Geography: CanadaDescription:
This article in the Economic Insights series reports the impact of correcting for variations in capacity utilization on multifactor productivity growth in Canadian business industries. It is based on a recently released Statistics Canada research paper. Results show that multifactor productivity growth is procyclical for almost all business industries, and that such pro-cyclicality largely reflects variations in capacity utilization in some industries, especially in manufacturing and mining.
Release date: 2013-10-04 - Articles and reports: 15-206-X2009025Description:
Baldwin and Gu (2008) provide an overview of the productivity program at Statistics Canada and a brief description of Canada's productivity performance. This paper provides an update of Canada's productivity performance in more recent years and analyses the sources of weak productivity performance in Canada since 2000.
Release date: 2009-08-04
Reference (0)
Reference (0) (0 results)
No content available at this time.
- Date modified: