Geography - Find information by region or area

For boundary files and other geographic reference, see Geographic files and documentation.

Results

All (26,494)

All (26,494) (0 to 10 of 26,494 results)

1. Geographic variation in female breast cancer incidence and mortality in Canada - Open in new window/tab
Articles and reports: 82-003-X202600500001
Description: Previous research has found variability in cancer incidence and cancer-related outcomes according to place of residence. This study examined geographic variability in the incidence and mortality of breast cancer among females in Canada, using data from the 2021 Canadian Cancer Registry (breast cancer incidence) and the Canadian Vital Statistics – Death database (breast cancer mortality). Age-standardized incidence rates (ASIRs) and age-standardized mortality rates (ASMRs) per 100,000 females per year and their rate ratios were calculated, as well as age group-specific and age-standardized stage-specific incidence rates, and examined across provinces and territories, community sizes, and peer groups (i.e., clusters of health regions with similar socioeconomic and demographic characteristics).
Release date: 2026-05-20
2. Enhancing the OncoSim-Breast model using Canadian breast density information - Open in new window/tab
Articles and reports: 82-003-X202600500002
Description: Breast cancer is the most commonly diagnosed cancer among women in Canada. Breast density substantially influences breast cancer risk and mammography performance. However, OncoSim-Breast, a Canadian microsimulation model representing breast cancer control, including cancer onset, screening, and survival, has not previously explicitly accounted for breast density. This study describes the incorporation of density-specific parameters—prevalence, relative risk of breast cancer, and digital mammography performance (sensitivity and specificity)—using data from five Canadian provinces, into the OncoSim-Breast model. Calibration experiments and internal validations were conducted to ensure the updated OncoSim-Breast model aligned with observed data from the Canadian Cancer Registry.
Release date: 2026-05-20
3. Preterm births among mothers from racialized groups, 2016-2021 - Open in new window/tab
Articles and reports: 82-625-X202600100001
Description: This is a health fact sheet about preterm births among mothers from racialized groups. This analysis includes live births from the five-year period preceding the 2021 Census.
Release date: 2026-05-20
4. Income Research Paper Series - Open in new window/tab
Journals and periodicals: 75F0002M
Description: This series provides detailed documentation on income developments, including survey design issues, data quality evaluation and exploratory research.
Release date: 2026-05-20
5. Health Reports - Open in new window/tab
Journals and periodicals: 82-003-X
Geography: Canada
Description:

Health Reports, published by the Health Analysis and Modelling Division of Statistics Canada, is a peer-reviewed journal of population health and health services research. It is designed for a broad audience that includes health professionals, researchers, policymakers, and the general public. The journal publishes articles of wide interest that contain original and timely analyses of national or provincial/territorial surveys or administrative databases. New articles are published electronically each month.

Health Reports had an impact factor of 3.3 for 2024 and a five-year impact factor of 4.4. All articles are indexed in PubMed. Our online catalogue is free and receives more than 700,000 visits per year. External submissions are welcome.
Release date: 2026-05-20
6. Health Fact Sheets - Open in new window/tab
Journals and periodicals: 82-625-X
Geography: Canada
Description: Health fact sheets will include short, focused, single-theme analysis documents. Over the course of the series, analysis will include topics on: Health conditions, lifestyle, well-being, disability, prevention and detection of disease, deaths, pregnancy and birth, health care services and environmental factors.
Release date: 2026-05-20
7. Consumer Price Index (CPI) statistics, alternative measures, unadjusted and seasonally adjusted, Bank of Canada - Open in new window/tab
Table: 10-10-0106-01
Geography: Canada
Frequency: Monthly
Description: This table contains 18 series, with data starting from 1979 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Alternative measures (18 items: Consumer Price Index (CPI) excluding food; energy and the effect of indirect taxes; seasonally adjusted; Consumer Price Index (CPI) excluding the effect of indirect taxes; seasonally adjusted; Consumer Price Index (CPI) excluding the effect of indirect taxes; Consumer Price Index (CPI) excluding food; energy and the effect of indirect taxes ...).
Release date: 2026-05-20
8. Bank of Canada, money market and other interest rates - Open in new window/tab
Table: 10-10-0139-01
Geography: Canada
Frequency: Daily
Description: This table contains 39 series, with data for starting from 1991 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Financial market statistics (39 items: Government of Canada Treasury Bills, 1-month (composite rates); Government of Canada Treasury Bills, 2-month (composite rates); Government of Canada Treasury Bills, 3-month (composite rates);Government of Canada Treasury Bills, 6-month (composite rates); ...).
Release date: 2026-05-20
9. Credit liabilities of households - Open in new window/tab
Table: 36-10-0639-01
Geography: Canada
Frequency: Monthly
Description:
Monthly credit aggregates for the household sector, by category.
Release date: 2026-05-20
10. Credit liabilities of private non-financial corporations - Open in new window/tab
Table: 36-10-0640-01
Geography: Canada
Frequency: Monthly
Description:
Monthly credit aggregates for the private non-financial corporations sector, by category.
Release date: 2026-05-20

Data (13,239)

Data (13,239) (90 to 100 of 13,239 results)

91. New issuances of securities by type of use of proceeds and by industry, monthly - Open in new window/tab
Table: 36-10-0642-01
Geography: Canada
Frequency: Monthly
Description:
Information on new issuances of securities by type of use of proceeds and by industry. The use of proceeds includes for merger and acquisition, exploration, for research and development, for working capital, for debt repayment and refinancing, and for general corporate purposes.
Release date: 2026-05-15
92. Manufacturing sales, by industry for 15 Selected Census Metropolitan Areas - Open in new window/tab
Table: 16-10-0011-01
Geography: Census metropolitan area
Frequency: Monthly
Description:
Monthly Canadian manufacturer's sales for 15 census metropolitan areas (CMA) for durable and non-durable goods by North American Industry Classification System (NAICS). Data in thousands of dollars. Unadjusted and seasonally adjusted data available from January 2013 to the current reference month. Not all combinations are available.

Release date: 2026-05-15
93. Manufacturing capacity utilization rates, by North American Industry Classification System (NAICS) - Open in new window/tab
Table: 16-10-0012-01
Geography: Canada
Frequency: Monthly
Description: Monthly capacity utilization rates for Canadian manufacturers by North American Industry Classification System (NAICS), from January 2017 to the current reference month.
Release date: 2026-05-15
94. Real manufacturing sales, orders, inventory owned and inventory to sales ratio, 2017 dollars, seasonally adjusted - Open in new window/tab
Table: 16-10-0013-01
Geography: Canada
Frequency: Monthly
Description: Canadian Sales of goods manufactured (shipments), new orders, unfilled orders, inventories, raw materials, goods or work in process, finished goods, and inventory to sales ratios for durable and non-durable goods by North American Industry Classification System (NAICS) for reference periods January 2002 to the current reference month. Not all combinations are available. Values are in constant dollars.
Release date: 2026-05-15
95. Manufacturers' sales, inventories, orders and inventory to sales ratios, by industry (dollars unless otherwise noted) - Open in new window/tab
Table: 16-10-0047-01
Geography: Canada
Frequency: Monthly
Description:
Monthly Canadian manufacturers' sales, new orders, unfilled orders, raw materials, goods or work in process, finished goods, total inventories, inventory to sales ratios and finished goods to sales ratios for durable and non-durable goods by North American Industry Classification System (NAICS), in dollars unless otherwise noted. Unadjusted and seasonally adjusted values available from January 1992 to the current reference month.
Release date: 2026-05-15
96. Manufacturers' sales, inventories, orders and inventory-to-sales ratios for motor vehicle and motor vehicle parts manufacturing industries - Open in new window/tab
Table: 16-10-0047-02
Geography: Canada
Frequency: Monthly
Description:
Monthly manufacturers' sales, inventories, orders and inventory-to-sales ratios, for motor vehicle and motor vehicle parts manufacturing industries, and motor vehicle body and trailer manufacturing industries, in dollars unless otherwise noted.

Release date: 2026-05-15
97. Manufacturing sales by industry and province, monthly (dollars unless otherwise noted) - Open in new window/tab
Table: 16-10-0048-01
Geography: Province or territory
Frequency: Monthly
Description:
Monthly provincial and territorial manufacturing sales, by North American Industry Classification System (NAICS), data in thousands of dollars. Unadjusted and seasonally adjusted values available from January 1992 to the current reference month. Not all combinations are available.
Release date: 2026-05-15
98. Traffic Flow Dashboard - Open in new window/tab
Data Visualization: 71-607-X2022018
Description: This dashboard shows traffic count data that is obtained from traffic camera imagery using a computer vision-based system developed at the Data Exploration and Integration Lab (DEIL) at Statistics Canada. The system periodically pulls traffic imagery from the Application Programmable Interfaces (APIs) of municipal and provincial traffic camera programs. Vehicle detection was implemented using the open source You Only Look Once version 3 (YOLOv3) object detection model that was trained on the Common Objects in Context (COCO) dataset. The output of the model is used to generates real-time counts of the detected vehicles (cars, trucks, buses, motorcycles).
Release date: 2026-05-15
99. Funds advanced, outstanding balances, and interest rates for new and existing lending, Bank of Canada - Open in new window/tab
Table: 10-10-0006-01
Geography: Canada
Frequency: Monthly
Description:
This table contains 102 series, with data starting from 2013, and some select series starting from 2016. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Components (51 items: Total, funds advanced, residential mortgages, insured; Variable rate, insured; Fixed rate, insured, less than 1 year; Fixed rate, insured, from 1 to less than 3 years; ...), and Unit of measure (2 items: Dollars; Interest rate). For additional clarification on the component dimension, please visit the OSFI website for the Report on New and Existing Lending.
Release date: 2026-05-14
100. Funds advanced, outstanding balances, and interest rates for new and existing lending, dollars, Bank of Canada - Open in new window/tab
Table: 10-10-0006-02
Geography: Canada
Frequency: Monthly
Description:
This table contains 51 series, with data starting from 2013, and some select series starting from 2016. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Components (51 items: Total, funds advanced, residential mortgages, insured; Variable rate, insured; Fixed rate, insured, less than 1 year; Fixed rate, insured, from 1 to less than 3 years; ...), and Unit of measure (1 item: Dollars). For additional clarification on the component dimension, please visit the OSFI website for the Report on New and Existing Lending.
Release date: 2026-05-14

Analysis (10,756)

Analysis (10,756) (10,690 to 10,700 of 10,756 results)

10,691. A personal view of hot deck imputation procedures - Open in new window/tab Archived
Articles and reports: 12-001-X197900254832
Description:
A Hot Deck imputation procedure is defined to be one where an incomplete response is completed by using values from one or more other records on the same file and the choice of these records varies with the record requiring imputation.
General approaches to Hot Deck imputation are outlined, with emphasis on the interaction between the edit constraints and the imputation procedures. Distance functions can be constructed on a mixture of categorical and numeric fields, can be modified to take account of the relative importance of fields and can discriminate against less desirable donors. Matching fields may be correlated with missing fields, may be linked with missing fields by edits or may be natural stratification variables; but increasing the number of matching fields does not necessarily result in a better match. It is important to audit the imputation process and to summarize its performance.
Hot Deck procedures should be evaluated to study the bias and reliability of the estimates, donor usage and frequency of imputation failure in terms of a variety of conditions of the data and variations of the imputation procedure. It appears that the only generally available approach to evaluation is by simulation.
Release date: 1979-12-14
10,692. Data, statistics, information - Some issues of the Canadian Social Statistics Scene - Open in new window/tab Archived
Articles and reports: 12-001-X197900254833
Description:
This paper looks at the current state of development of social statistics in Canada. Some key concepts related to statistics and social information are defined and discussed. The availability and analysis of administrative data is highlighted, along with the need for social surveys. Suggestions are made about the types of data analysis needed for the development of social decision models to meet policy requirements. Finally, an outline of priorities for future work toward the effective use of social statistics is given.
Release date: 1979-12-14
10,693. Management of information: Future trends - Open in new window/tab Archived
Articles and reports: 12-001-X197900100001
Description: This paper discusses the management of information within the context of the information industry and indicates some likely future trends related thereto. The information industry itself is first briefly described. Then the process used in producing information, the organizational structure required for such production, and the legislation relating to the information industry are discussed in turn. Finally, some approaches to solving the problems of the future are suggested.
Release date: 1979-06-15
10,694. Non-response in the Canadian Labour Force Survey - Open in new window/tab Archived
Articles and reports: 12-001-X197900100002
Description: This paper includes a description of interviewer techniques and procedures used to minimize non-response, an outline of methods used to monitor and control non-response, and a discussion of how non-respondents are treated in the data processing and estimation stages of the Canadian Labour Force Survey. Recent non-response rates as well as data on the characteristics of non-respondents are also given. It is concluded that a yearly non-response rate of approximately 5 percent is probably the best that can be achieved in the Labour Force Survey.
Release date: 1979-06-15
10,695. An empirical investigation of an improved method of measuring correlated response variance - Open in new window/tab Archived
Articles and reports: 12-001-X197900100003
Description: Two methods for estimating the correlated response variance of a survey estimator are studied by way of both theoretical comparison and empirical investigation. The variance of these estimators is discussed and the effects of outliers examined. Finally, an improved estimator is developed and evaluated.
Release date: 1979-06-15
10,696. Selecting a sample of size n with PPSWOR from a finite population - Open in new window/tab Archived
Articles and reports: 12-001-X197900100004
Description: Let U = {1, 2, …, i, …, N} be a finite population of N identifiable units. A known “size measure” x_i is associated with unit i; i = 1, 2, ..., N. A sampling procedure for selecting a sample of size n (2 < n < N) with probability proportional to size (PPS) and without replacement (WOR) from the population is proposed. With this method, the inclusion probability is proportional to size (IPPS) for each unit in the population.
Release date: 1979-06-15
10,697. On the inclusion of large units in simple random sampling - Open in new window/tab Archived
Articles and reports: 12-001-X197900100005
Description: Approximate cutoff rules for stratifying a population into a take-all and take-some universe have been given by Dalenius (1950) and Glasser (1962). They expressed the cutoff value (that value which delineates the boundary of the take-all and take-some) as a function of the mean, the sampling weight and the population variance. Their cutoff values were derived on the assumption that a single random sample of size n was to be drawn without replacement from the population of size N.
In the present context, exact and approximate cutoff rules have been worked out for a similar situation. Rather than providing the sample size of the sample, the precision (coefficient of variation) is given. Note that in many sampling situations, the sampler is given a set of objectives in terms of reliability and not sample size. The result is particularly useful for determining the take-all - take-some boundary for samples drawn from a known population. The procedure is also extended to ratio estimation.
Release date: 1979-06-15
10,698. Unbiased estimation of proportions under sequential sampling - Open in new window/tab Archived
Articles and reports: 12-001-X197900100006
Description: Under a sequential sampling plan, the proportion defective in the sample is generally a biased estimator of the population value. In this paper, an unbiased estimator is given. Also, an unbiased estimator of its variance is derived. These results are applied to an estimation problem from the 1976 Canadian Census.
Release date: 1979-06-15
10,699. The application of a systematic method of automatic edit and imputation to the 1976 Canadian Census of Population and Housing - Open in new window/tab Archived
Articles and reports: 12-001-X197800254832
Description: I.P. Fellegi and D. Holt proposed a systematic approach to automatic edit and imputation. An implementation of this proposal was a Generalized Edit and Imputation System by the Hot-Deck Approach, that was utilized in the edit and imputation of the 1976 Canadian Census of Population and Housing. This paper discusses that application, evaluating the strengths and weaknesses of the methodology with some empirical evidence. The system will be considered in relation to the general issues of the edit and imputation of survey data. Some directions for future developments will also be considered.
Release date: 1978-12-15
10,700. Large scale imputation of survey data - Open in new window/tab Archived
Articles and reports: 12-001-X197800254833
Description: Owners of small businesses complain about the quantity of forms they are required to collectors of statistics. Administrative data are an alternative source but do not usually include all the information required by the survey takers.
The “Tax Data Imputation System” makes use of tax data collected from a large number of businesses by Revenue Canada and data obtained by sample survey for a small subset of these businesses. Survey data is imputed (estimated) for all the businesses not actually surveyed using a “hot-deck” technique, with adjustments made to ensure certain edit rules are satisfied. The results of a simulation study suggest that this procedure has reasonable statistical properties. Estimators (of means or totals) are unbiased with variances of comparable size to the corresponding ratio estimators.
Release date: 1978-12-15

Reference (2,027)

Reference (2,027) (1,890 to 1,900 of 2,027 results)

1,891. Canadian Tobacco and Nicotine Survey - Open in new window/tab
Surveys and statistical programs – Documentation: 5305
Description: The information collected in this survey will be used to fill important data gaps related to vaping, cannabis, and tobacco usage. The data will inform policy and provide a current snapshot of use across Canada.Until 2017, Statistics Canada conducted the Canadian Tobacco, Alcohol and Drugs Survey (CTADS), which collected data on tobacco as well as alcohol and drug use in Canada. In 2019, the Canadian Alcohol and Drugs Survey (CADS) was conducted to collect data on alcohol and drug use independently from the Canadian Tobacco and Nicotine Survey (CTNS) which was conducted to primarily collect data on tobacco and nicotine.
1,892. New Motor Vehicle Registration Survey - Open in new window/tab
Surveys and statistical programs – Documentation: 5307
Description: This survey collects quarterly data on the number of new motor vehicles registered in Canada.
1,893. Canadian Perspectives Survey Series (CPSS) - Open in new window/tab
Surveys and statistical programs – Documentation: 5311
Description: The Canadian Perspectives Survey Series (CPSS), Statistics Canada's new data collection project, is aimed at understanding social issues more rapidly, while reducing the cost of collecting data.
1,894. Survey of Employees under Federal Jurisdiction - Open in new window/tab
Surveys and statistical programs – Documentation: 5312
Description: Statistics Canada is conducting the Survey of Employees under Federal Jurisdiction on behalf of Employment and Social Development Canada. This survey collects information from a sample of employees working for businesses under federal jurisdiction, including regular, seasonal, term, and casual or on-call employees.
1,895. Survey on Quality of Employment - Open in new window/tab
Surveys and statistical programs – Documentation: 5313
Description: The purpose of this survey is to gain a better understanding of job quality in Canada, from the perspective of the worker, including both employees and the self-employed. Questions will be asked about employment status, work schedules, multiple jobs, job security, reasons for self-employment, compensation and benefits, and training.
1,896. Canada's external trade classified by Broad Economic Categories - Open in new window/tab
Surveys and statistical programs – Documentation: 5314
Description: Canada's external trade classified by Broad Economic Categories of Revision 5 (BEC Rev. 5) provides Canada's merchandise imports and exports by broad economic categories and partner country on customs basis. The data published is based on the concordance of 2017 Harmonised System HS6 codes to BEC Rev. 5 codes.
1,897. Survey on Savings for Persons with Disabilities - Open in new window/tab
Surveys and statistical programs – Documentation: 5315
Description: The purpose of the Survey on Savings for Persons with Disabilities is to gather information about the knowledge and behaviours of Canadians with disabilities and their caregivers with regard to savings.
1,898. Survey of Employers on Workers' Skills - Open in new window/tab
Surveys and statistical programs – Documentation: 5317
Description: The survey is designed to collect information from businesses on issues of skills requirements and skills development, as well as on the strategies deployed to mitigate the consequences of skill gaps within their businesses.
1,899. Canadian Survey on Business Conditions - Open in new window/tab
Surveys and statistical programs – Documentation: 5318
Description: The purpose of this survey is to collect information on businesses in Canada related to emerging issues. This iteration of the survey focuses on business expectations and business conditions in Canada. In addition, the questionnaire for the first quarter of 2024 includes a component specifically for non-profit organizations (NPOs). The intent of this set of questions is to address a present data gap and to provide a better understanding of the non-profit sector.
1,900. COVID-19 epidemiological reports - Open in new window/tab
Surveys and statistical programs – Documentation: 5319
Description: The data contain detailed confirmed cases of coronavirus disease (COVID-19) in Canada, which is compiled by the Public Health Agency of Canada, with the contribution from provincial and territorial Health ministries.

Other (1)

Other (1) ((1 result))

1. Data Visualization: Best Practices - Open in new window/tab
89-26-0005
Description: This document provides best practices in data visualization for basic charts. A data visualization product can be created with very different goals and for different audiences with a wide range of expertise. General information applicable to any data visualization product is provided, as well as detailed information for data visualization by chart. This report covers 5 different categories of charts, and presents graphs from the following 5 general categories: pie charts, bar charts, point charts, line charts and maps.
Release date: 2023-02-24

Date modified:: 2026-05-21

Language selection

WxT Language switcher

Search and menus

WxT Search form

Geography - Find information by region or area

Filter results by

Keyword(s)

Subject

Type

Survey or statistical program

Content

Results

All (26,494) (0 to 10 of 26,494 results)

Data (13,239) (90 to 100 of 13,239 results)

Analysis (10,756) (10,690 to 10,700 of 10,756 results)

Reference (2,027) (1,890 to 1,900 of 2,027 results)

Other (1) ((1 result))

Geography - Find information by region or area

Filter results by

Keyword(s)

Subject

Type

Survey or statistical program

Content

Results

All (26,494) (0 to 10 of 26,494 results)

Data (13,239) (90 to 100 of 13,239 results)

Analysis (10,756) (10,690 to 10,700 of 10,756 results)

Reference (2,027) (1,890 to 1,900 of 2,027 results)

Other (1) ((1 result))

How are the results ordered?

How are the results ordered?

How do I use the filters and the search box?

How do I refine my search?

How does the search work?