Analysis

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: As the twelfth goal outlined in the 2030 Agenda for Sustainable Development, Canada and other UN member states have committed to ensure sustainable consumption and production patterns by 2030. This 2024 infographic provides an overview of indicators underlying the twelfth Sustainable Development Goal in support of responsible consumption and production, and the statistics and data sources used to monitor and report on this goal in Canada.

Description: The purpose of this research paper is to highlight the impact of the many challenges faced over time by the sawmill industry on its development and its role as an economic lever for many Canadian communities.

Description:

This infographic looks at the impact the pandemic and supply chain disruptions have had on manufacturing in Canada. Specific data that is collected by the Monthly Survey of Manufacturing is shown on the infographic to help highlight the impacts.

Description:

The federal government offers business innovation and growth support through program streams managed by its departments and agencies. In 2017, enterprises in the manufacturing sector accounted for almost one-quarter of the beneficiaries of this support and received almost one-third of the total value of support (Statistics Canada, 2020). The objective of this analysis is to assess the impact of federal growth and innovation support on the employment and revenue of beneficiary enterprises in the manufacturing sector between 2007 and 2017. This analysis suggests that enterprises that received federal support for growth and innovation experienced stronger employment and revenue growth relative to non-beneficiary enterprises. Over the three years following receipt of support, employment growth for beneficiary enterprises averaged 1.8% per year while, on average, enterprises that did not receive support experienced employment declines. Over the same period, the average annual revenue growth of beneficiary enterprises was higher than that of non-beneficiary enterprises by 4.6 percentage points.

Description: This infographic features sales and inventories for the petroleum and coal products industry, as well as refinery production, while highlighting the impacts related to the COVID-19 pandemic.

Description: As the twelfth goal outlined in the 2030 Agenda for Sustainable Development, Canada and other UN member states have committed to ensure sustainable consumption and production patterns by 2030. This 2020 infographic provides an overview of indicators underlying the twelfth Sustainable Development Goal in support of responsible consumption and production, and the statistics and data sources used to monitor and report on this goal in Canada.

Description:

From the early 2000s to the mid-2010s, the number of employees in manufacturing fell by roughly half a million in Canada. During that period, the percentage of Canadian men aged 21 to 55 employed mainly full time for at least 48 weeks in a given year fell by 5 percentage points, from 63.6% in 2000 to 58.6% in 2015. This study investigates whether the two trends are connected, i.e., whether the decline in manufacturing employment caused a decline in employment rates and wages among men.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This infographic looks at the impact the pandemic and supply chain disruptions have had on manufacturing in Canada. Specific data that is collected by the Monthly Survey of Manufacturing is shown on the infographic to help highlight the impacts.

Description: This infographic features sales and inventories for the petroleum and coal products industry, as well as refinery production, while highlighting the impacts related to the COVID-19 pandemic.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This paper investigates the productivity effects of the Canada-United States Free Trade Agreement (FTA) on Canadian manufacturing. It finds that Canadian tariff cuts increased exit rates among moderately productive non-exporting plants. This led to the reallocation of market share toward highly productive plants, which helps explain why aggregate productivity gains were observed when Canadian tariffs were reduced. The paper also finds that all of the within-plant productivity gains resulting from the U.S. tariff cuts involved exporters and, especially, new entrants into the export market. It demonstrates that any lack of output responses and labour-shedding as a consequence of the FTA were experienced by Canadian plants who were non-exporters, while exporters captured the gains from the FTA.

Description:

This study reviews status and trends for the manufacturing sector in 2007. It analyses major regional and industry shifts in production and put them in the context of major socio-economic drivers such as domestic demand and exports. Employment, productivity and profitability indicators are also presented.

Description:

A study of which industries are most reliant on exports for their output, and which import the most inputs.

Description:

This paper examines the presence of knowledge spillovers that affect the adoption of advanced technologies in the Canadian manufacturing sector. It examines whether plants that adopt advanced technologies are more likely to do so when there are other nearby plants that do so within a model of technology adoption.

Description:

Productivity and wages tend to be higher in cities. This is typically explained by agglomeration economies, which increase the returns associated with urban locations. Competing arguments of specialization and diversity undergird these claims. Empirical research has long sought to confirm the existence of agglomeration economies and to adjudicate between the models of Marshall, Arrow and Romer (MAR) that suggest the benefits of proximity are largely confined to individual industries, and the claims of Jacobs (1969) that such benefits derive from a general increase in the density of economic activity in a particular place and are shared by all occupants of that location. The primary goal of this paper is to identify the main sources of urban increasing returns, after Marshall (1920). A secondary goal is to examine the geographical distance across which externalities flow between businesses in the same industry. We bring to bear on these questions plant-level data organized in the form of a panel across the years 1989 and 1999. The panel data overcome selection bias resulting from unobserved plant-level heterogeneity that is constant over time. Plant-level production functions are estimated across the Canadian manufacturing sector as a whole and for five broad industry groups, each characterized by the nature of their output. Results provide strong support for Marshall's (1920) claims about the importance of buyer-supplier networks, labour market pooling and spillovers. The data show spillovers enhance plant productivity within industries rather than between them and that these spillovers tend to be more spatially extensive than previous studies have found.

Description:

In this paper, we provide an international comparison of the growth in Canadian and U.S. manufacturing industries over the 1961-to-2003 period. We find that average annual growth rates of labour productivity growth were almost identical in the Canadian and U.S. manufacturing sectors during this period. But the sources of labour productivity growth differed in the two countries. Intermediate input deepening was a more important source of labour productivity growth in Canada than in the United States, while investment in capital and multifactor productivity (MFP) growth were more important in the United States than in Canada. After 1996, labour productivity growth in Canada was lower than in the United States. The post-1996 slower labour productivity growth in Canada relative to the United States was due to slower growth in MFP and slower growth in capital intensity. The slower MFP growth in Canada accounted for 60% of Canada - United States labour productivity growth difference, and slower growth in capital intensity accounted for 30%. The slower MFP growth in the Canadian manufacturing sector relative to that of the United States after 1996 was due to lower MFP growth in the computer and electronic products industry. The slower growth in capital'labour ratio in the Canadian manufacturing compared with the United States after 1996 is related to the changes in relative prices of capital and labour inputs in the two countries.

Description:

This paper summarizes the results of several research studies conducted by the Micro-economic Analysis Division of Statistics Canada that investigate the impact of advanced technology use on business performance. These studies combine establishment-level survey data on advanced technology practices with longitudinal data that measure changes in relative performance. Together, these studies provide strong evidence that technology strategies have considerable bearing on competitive outcomes after other correlates of plant performance are taken into account. Advanced communications technologies warrant special emphasis, as the use of these technologies has been shown to be closely associated with changes in relative productivity.

Description:

Exports to China in 2007 have risen faster than imports, reflecting its voracious appetite for resources. This has helped reduce Canada's dependence on US markets.

Description:

The most recent Statistics Canada Survey of Innovation (2005) distinguished five types of innovation. The questions on types of innovation were redesigned in response to the 1997 revision of the Oslo Manual, which incorporated new insights on innovation in the service industries, and broadened the concept of process innovation to include not only production processes but also methods of product delivery. This article examines the five different types of innovation in Canadian manufacturing establishments and industry groups.

Description:

This article summarizes the findings of an econometric study using data from the 2005 Canadian Survey of Innovation. The study looked at the decision of firms in the Canadian manufacturing sector to co-operate on innovation projects. The analysis reveals that the factors influencing the decision to co-operate in order to access external knowledge are very similar to those influencing cost-sharing motives. It also finds that public funding leads firms to co-operate in order to access external knowledge and research and development (R&D).

Description:

Presented in almanac style, the 2012 Canada Year Book contains more than 500 pages of tables, charts and succinct analytical articles on every major area of Statistics Canada's expertise. The Canada Year Book is the premier reference on the social and economic life of Canada and its citizens.

Description:

This document describes all aspects of output-based Gross Domestic Product (GDP), also known as GDP by industry or simply monthly GDP. It contains a comprehensive record of specific methodologies and data sources, on an industry by industry basis.

It is meant to complement a previous Statistics Canada publication, released in November 2002, entitled Gross Domestic Product by Industry, Sources and Methods (Catalogue no. 15-547), which discusses in general terms the concepts, definitions, classifications and statistical methods underlying the monthly GDP measures.

Description:

This publication of the Canadian food processing industry provides an overview of industry trends and comparisons with the other G-7 countries.

Description:

The Canada e-Book is an online version of the Canada Year Book with texts, tables, charts and audio clips that present the country's economic and social trends. The Canada e-Book illustrates Canada and Canadians under four broad headings: The Land, The People, The Economy, and The State. You will find a wealth of information on topics including the human imprint on the environment, population and demography, health, education, household and family life, labour force, arts and leisure, industries, finance, government and justice. All Canadians will enjoy this useful reference that helps explain the social, economic and cultural forces that shape our nation.

Description:

The intent of this research paper series is to address a variety of topics related to the Canadian manufacturing sector as a whole. The papers in this series are based on the Annual Survey of Manufactures (ASM) and focus on the entire manufacturing sector (all 22 major manufacturing groups). Other data sources are used in specific papers. The topics covered include packaging products used by manufacturing industries, evolution of production costs, comparison of establishment groups (ranked by volume of shipments) and stages of processing.

Description:

Fabricated metal products industries remain in the middle of an expansion period. The construction sector's vitality, as well as the high North-American demand for industrial products, allow metal products manufacturers to live glorious days. However, where competitiveness is concerned, there could be trouble in paradise. In the last few years, the cost of labour has been on the rise, while the value added for each paid hour has been weakening. Moreover, imports have been increasing at a higher pace than exports in the last two years.

Description:

Data from the Annual Survey of manufactures (ASM) is the prime source for this publication. The results of the 1997 survey are supplemented by data from sub-annual Statistics Canada surveys and major economic indicators.

Description:

The latest issue contains the article "Performance of the textile products industries. by Yasmin Sheikh. The business climate under which the manufacturing sector has been operating has evolved particularly in the last decade. Within manufacturing, certain industries have responded better than others to the challenge brought about by advancement in technology and increased globalization. Textile products was the fastest growing industry in terms of Gross Domestic Product (GDP) from 1961 to 1987 compared to the overall economy, the manufacturing sector and closely related Primary Textile Industries. However, this industry's GDP declined sharply between 1988 and 1992. Except for 1996, the industry again experienced growth from 1993 onwards but its GDP growth index is well below its peak in 1987.

Results of the Annual Survey of Manufacturers show that manufacturing shipments of textile products in constant 1992 dollars peaked in 1988 and have since declined. This paper reviews data from this survey for the period 1988 to 1997 to underline the changes in the size, structure and performance of this industry and how it has fared in comparison to the Primary Textiles Industry. It also highlights current developments using results of the Monthly Survey of Manufacturers.

Description:

The latest issue contains the article "Refined petroleum and coal products industries" by Randall Sheldrick. The Canadian economy has been on the rise for almost a decade. But, the economy suffered a modest set back in 1998 due to the effects of the Asian economic and financial market crisis. While most manufacturing industries continued to expand, resource-based industries such as refined petroleum were hard hit by a slump in commodity prices.

This document presents an overview of the Refined Petroleum Products Industry. Most of the findings are based on the Annual Survey of Manufactures (ASM). According to this survey the total value of shipments for the industry stalled at just over $21 billion in 1997. Despite the fact that the industry tends to be cyclical in nature, demand for refined petroleum products is expected to increase steadily into the next century.

Description:

The most recent issue contains the article "The beverage industries: two markets" by Peter Zylstra.This paper presents recent developments in the Beverage Industries. Following a brief introduction, the industry is analysed in terms of the four component sub-industries, which fall into two groups: soft drinks and alcoholic beverages. The two groups constitute different overall markets. The summary of recent developments is based on results of the 1997 Annual Survey of Manufactures (ASM). Other sources are used to provide industry environment and economic backgroun.