Weighting and estimation

Results

All (638)

All (638) (0 to 10 of 638 results)

1. Exact and approximation formulas for second-order inclusion probabilities in randomized systematic sampling with unequal probabilities and without replacement
Articles and reports: 12-001-X202600100003
Description: Probability-proportional-to-size sampling is widely used by national statistical offices. Here population units are selected with probabilities proportional to an auxiliary variable. Variance formulas in such designs require both first- and second-order inclusion probabilities. The computation of second-order inclusion probabilities is particularly challenging for large populations, and has been the subject of extensive research. This article presents some new exact and approximation formulas for second-order inclusion probabilities in randomized systematic sampling with unequal probabilities and without replacement.
Release date: 2026-06-29
2. Improving the coverage of confidence intervals with respect to degrees of freedom: Application to the Canadian Census
Articles and reports: 12-001-X202600100005
Description: Confidence intervals are very often constructed based on a probability distribution that uses a certain number of degrees of freedom as a parameter. This is the case with the Student and the modified Wilson confidence intervals, discussed in this article, which use quantiles from the Student distribution where the number of degrees of freedom is generally unknown. For the length of a confidence interval to be representative of the reliability of an estimate, the actual coverage rate must match the nominal rate. To that end, the number of degrees of freedom in the probability distribution used in practice to calculate the confidence interval must be estimated as precisely as possible. An approximate rule is often used, although it tends to overestimate the actual number of degrees of freedom. In this article, a more precise version of degrees of freedom, derived from the Satterthwaite approximation, is obtained in the context of the Canadian Census of Population. The sampling design is equivalent to a simple random design without replacement, cluster-stratified, and the variance estimation method is an adaptation of the balanced repeated replication method. An explicit expression of the degrees of freedom is obtained under these conditions, enabling the factors influencing them to be identified. For comparison, the degree of freedom formula is also established for the conventional variance estimator. A simulation study shows that using this version of degrees of freedom corrects the undercoverage problem observed with the approximate rule, showing the importance of accurately assessing this number.
Release date: 2026-06-29
3. The inverse-variance trap: A simple ratio fix for combining skewed data
Articles and reports: 12-001-X202600100009
Description: Combining estimates from independent surveys via inverse-variance weights can lead to negative bias when unknown variances are estimated and the target variable is non-negative and positively skewed. In such cases, strong positive correlations typically arise between the estimators and their corresponding variance estimators, causing standard linear combinations with inverse-variance weights to exhibit negative bias. We introduce a strikingly simple method to reduce bias: replace the standard weight with the ratio of the estimator to the variance estimator. Under a linear model linking the two, we show that the new ratio-weighted estimator is approximately unbiased, whereas the conventional inverse-variance combination exhibits downward bias. Through simulations, we demonstrate that the new method brings both the bias and the mean squared error closer to the optimum for a wide range of different target variables. As our method uses only standardly reported summary statistics, it can be immediately adopted to reduce this widespread bias and improve the reliability of scientific findings in various fields.
Release date: 2026-06-29
4. Variance of the generalized regression estimator under measurement error
Articles and reports: 12-001-X202600100010
Description: With the exception of two-phase sampling, the standard variance approximation of the generalized regression (GREG) estimator assumes that the population totals in the weighting scheme are observed without error. If the weighting model of the GREG estimator contains population totals that are observed with measurement error sources other than the sampling error of first-phase estimates, then this uncertainty will be ignored by the variance approximation of the GREG estimator. This paper proposes a variance approximation for the GREG estimator that accounts for additional uncertainty arising from measurement error in one or more of the population totals used in the weighting scheme. This approach has been developed for, and is being applied to, the Dutch Labour Force Survey (DLFS). The monthly publications of the DLFS are obtained with a time series model, which corrects for rotation group bias and discontinuities caused by major redesigns and the loss of face-to-face interviews during COVID-19. The GREG estimates for the quarterly figures are benchmarked to the average of the monthly publications to enforce numerical consistency between monthly and quarterly publication tables. The standard variance approximation of the GREG estimator assumes that these population totals are observed without error. This results in an underestimation of the variance of the GREG estimator. The variance approximation proposed in this paper results in more realistic standard errors for the quarterly GREG estimates.
Release date: 2026-06-29
5. Bayesian differential privacy for small counties and individual commodities
Articles and reports: 12-001-X202600100011
Description: We construct a hybrid Bayesian method, which includes a differentially private mechanism, to mask Census county totals for a U.S. state on acreage of a commodity. We use surrogates for data collected at the farm level from a past U.S. Census of Agriculture to illustrate our procedure. We use two Bayesian small area models (parametric and mixture) to accommodate the smaller counties with fewer farms and some counties with large acres. In these models, the Laplace distribution provides a differentially private mechanism. In pre-processing, we also incorporate the Census weights to form the observed total acreage, a scaling factor to the Laplace mechanism for each county, a square-root transformation of the observed total acreage to avoid negative masked estimates especially for small counties, and the p-percent rule and the 3+ rule to partition the counties into suppressed counties, non-sensitive counties and sensitive counties. Because of difficulties in specifying and tuning the privacy budget (an unknown parameter), to balance security and utility, we specify a prior for the privacy budget, where the values are not specified, and the Gibbs sampler is used to fit the hierarchical Bayesian models. In post-processing, we use Bayesian predictive inference to obtain masked county acreages, and this includes a benchmarking so that the masked state total matches the observed state total. As a measure of reliability of the Bayesian procedure, we use the posterior coefficients of variation for the masked posterior means of the counties. As a measure of utility, we use the absolute relative errors for the individual counties, together with other global measures. For the sensitive counties, there are some differences between the two small area models but both are much better than an individual area model; the mixture model being the best compromise for security and utility.
Release date: 2026-06-29
6. Small area estimation of general indicators in off-census years
Articles and reports: 12-001-X202600100012
Description: We propose small area estimators of general indicators in off-census years, which avoid the use of deprecated census microdata, but are nearly optimal in census years. The procedure is based on replacing the obsolete census file with a larger unit-level survey that adequately covers the areas of interest and contains the values of useful auxiliary variables. However, the minimal data requirement of the proposed method is a single survey with microdata on the target variable and suitable auxiliary variables for the period of interest. We also develop an estimator of the mean squared error (MSE) that accounts for the uncertainty introduced by the large survey used to replace the census of auxiliary information. Our empirical results indicate that the proposed predictors perform clearly better than the alternative predictors when census data are outdated, and are very close to optimal ones when census data are correct. They also illustrate that the proposed total MSE estimator corrects for the bias of purely model-based MSE estimators that do not account for the large survey uncertainty.
Release date: 2026-06-29
7. A Framework for Projecting Housing Use Associated with Immigrants and Non-Permanent Residents
Surveys and statistical programs – Documentation: 11-633-X2026002
Description: Recent changes in Canada’s immigration levels have heightened interest in understanding how immigration affects housing demand. This article develops a methodological framework for projecting housing use associated with permanent residents (PRs) and non-permanent residents (NPRs) under alternative immigration scenarios. The framework applies observed per capita housing use rates from the Census of Population to estimate incremental housing use by tenure over time.
Release date: 2026-04-24
8. Effects of model misspecification on small area estimators
Articles and reports: 12-001-X202500200001
Description: Nested error regression models are commonly used to incorporate unit specific auxiliary variables to improve small area estimates. When the mean structure of the model is misspecified, the design-based mean squared prediction error (MSPE) of Empirical Best Linear Unbiased Predictors (EBLUP) generally increases. The Observed Best Prediction (OBP) method has been proposed with the intent to improve on the design-based MSPE over EBLUP. In this paper, we conduct a Monte Carlo simulation experiments to understand the effect of misspsecification of mean structures on different small area estimators. Our findings suggest that the OBP using unit-level auxiliary variables does not outperform the EBLUP in terms of design-based MSPE, unless the number of small areas m is extremely large. Conversely, the performance of OBP significantly improves when area-level auxiliary variables are employed. This paper includes both analytical and numerical evidence to demonstrate these observations, providing practical insights for addressing model misspecification in small area estimation (SAE).
Release date: 2025-12-23
9. Estimating monthly indicators for Consumer Confidence using Structural Time Series Models
Articles and reports: 12-001-X202500200003
Description: In this paper a model-based inference procedure based on a multivariate structural time series model is developed for the production of monthly figures about consumer confidence. The input for the model are five series of direct estimates for the indices that measure consumer confidence, which are derived from the Dutch Consumer Survey. The model improves the accuracy of the direct estimates, since it provides a better separation of measurement errors and sampling errors from estimated target parameters. The standard errors for the month-to-month changes are clearly smaller under the time series model. A second problem addressed in this paper is related to the transition to a new survey process in 2017. Structural time series models in combination with a parallel run are applied to estimate discontinuities induced by the redesign. An algorithm designed for the consumer confidence variables is developed to construct uninterrupted input series for the aforementioned structural time series model. This inference method facilitated a smooth transition to a new survey design and resulted in uninterrupted series about consumer confidence that date back to 1986. The method is implemented for the production of official monthly figures on consumer confidence in the Netherlands.
Release date: 2025-12-23
10. Quantile balancing inverse probability weighting for non-probability samples
Articles and reports: 12-001-X202500200005
Description: The use of non-probability data sources for statistical purposes and for official statistics has become increasingly popular in recent years. However, statistical inference based on non-probability samples is made more difficult by nature of their biasedness and lack of representativity. In this paper we propose quantile balancing inverse probability weighting estimator (QBIPW) for non-probability samples. We apply the idea of Harms and Duchesne (2006) allowing the use of quantile information in the estimation process to reproduce known totals and the distribution of auxiliary variables. We discuss the estimation of the QBIPW probabilities and its variance. Our simulation study has demonstrated that the proposed estimators are robust against model mis-specification and, as a result, help to reduce bias and mean squared error. Finally, we applied the proposed methods to estimate the share of job vacancies aimed at Ukrainian workers in Poland using an integrated set of administrative and survey data about job vacancies.
Release date: 2025-12-23

Data (0)

Data (0) (0 results)

No content available at this time.

Analysis (610)

Analysis (610) (10 to 20 of 610 results)

11. Performance of hierarchical Bayes small area estimators using noninformative and informative priors with an application to the Canadian Labor Force Survey
Articles and reports: 12-001-X202500200010
Description: In this paper, we study the performance of hierarchical Bayes (HB) small area estimators using noninformative and informative priors. We apply the Bayesian models of You and Chapman (2006) and You (2021) to the Canadian Labor Force Survey (LFS) data and evaluate the impact of the priors on the HB estimators. A Bayesian model comparison and simulation study are also conducted. Our results indicate that a correct informative prior can lead to very good results, and noninformative priors can also perform very well. Incorrect informative priors can lead to poor results in terms of large bias and large coefficient of variation (CV). Noninformative priors are recommended in practice for HB small area estimation unless correctly specified informative priors are available. Informative priors are particularly useful when the number of small areas is relatively small.
Release date: 2025-12-23
12. Approximate hierarchical Bayes small area estimation using Natural Exponential Family with Quadratic Variance Function and poststratification
Articles and reports: 12-001-X202500200011
Description: We propose an approximate hierarchical Bayes approach that uses the Natural Exponential Family with Quadratic Variance Function (NEF-QVF) in combining information from multiple sources to improve traditional survey estimates of finite population means for small areas. Unlike other Bayesian approaches in finite population sampling, we do not assume a model for all units of the finite population and do not require linking sampled units to the finite population frame. We assume a model only for the finite population units in which the outcome variable is observed; because, for these units, the assumed model can be checked using existing statistical tools. We do not posit an elaborate model on the true means for unobserved units. Instead, we assume that population means of cells with the same combination of factor levels are identical across small areas, and that the population mean for a cell is identical to the mean of the observed units in that cell. We apply our proposed methodology to a real-life survey, linking information from multiple disparate data sources. We also provide practical ways of model selection that can be applied to a wider class of models under similar setting but for a diverse range of scientific problems.
Release date: 2025-12-23
13. Modified observed best prediction strategies for small area estimation with unit-level data
Articles and reports: 12-001-X202500200012
Description: The observed best prediction (OBP) under a nested-error regression (NER) model was previously proposed using a design-based mean squared prediction error (MSPE) as a tool to derive the best predictive estimator (BPE). A recent study showed the OBP under the NER model may suffer from numerical instability when computing the BPE. We propose several modifications of the OBP under the NER model, including ones using a model-based MSPE to derive the BPE, to improve the numerical stability and predictive performance. We compare the performance of the modified OBP strategies with the existing methods in a simulation study. A real-data example is discussed.
Release date: 2025-12-23
14. Reverse-Engineering a Hypothetical Raking Process for the Estimation of Mean Squared Error of Raked Small Area Estimates Archived
Articles and reports: 11-522-X202500100006
Description: Small area estimation is frequently used to produce estimates at a disaggregated level where direct survey estimation does not have sufficient sample to produce precise estimates. Often this is done using the area-level Fay-Herriot model, by assuming the direct estimates are independent under the design and have a known variance, and applying a smoothing process to the variance estimates of the direct estimates to better meet that last assumption. It is not rare that small area estimates are benchmarked/raked to aggregated level direct estimates. This article shows that wrongly assuming independence can have a big impact on the MSE of the raked estimates. Values of the covariances between direct estimates are thus required for good point and MSE estimates. Getting good estimates of those covariances is difficult given the small sample sizes in some areas. An original way of deriving values for those covariances, by reverse-engineering a hypothetical raking process, is presented.
Release date: 2025-09-08
15. Correcting Selection Bias in a Non-probability Two-phase Payment Survey Archived
Articles and reports: 11-522-X202500100007
Description: This paper employs the Pseudo Maximum Likelihood (PML) estimator to the non-probability two-phase sampling when relevant auxiliary information is available from both probability survey sample and non-probability survey sample. To accommodate various weight adjustments and estimates variance beyond totals and means such as medians and quantiles, a simplified pseudo-population bootstrap procedure is proposed to approximately estimate the second-phase variance. Specifically, the simplification ignores the second phase sampling variability (i.e., treated as fixed, while in fact it is random), if the first-phase sampling fraction of the non-probability sample is negligible. Using the Bank of Canada 2020 Cash Alternative Survey Wave 2, the performance of the proposed method is compared to alternative methods, which either do not explicitly model the selection probability (i.e., raking) or ignore the valuable information from Phase 1 (i.e., Phase-2-Only). The results show that the PML-based approach performs better than raking and Phase-2-Only estimates in terms of reducing the selection bias for both phases' payment-related variables, especially for the low-response youth group. Estimated variances of the PML-based estimates are stable.

Release date: 2025-09-08
16. A Bias Evaluation for Probabilistic Web Panels at Statistics Canada Archived
Articles and reports: 11-522-X202500100009
Description: Three series of web panels were implemented at Statistics Canada from 2020 to 2024. Participants for these web panel series were recruited from respondents of large probabilistic social surveys (recruitment surveys), and subsequently were invited to complete a series of short online surveys. Estimates of recruitment survey variables were calculated using both recruitment survey weights and web panel weights, and these were compared; differences signal the possibility of residual bias that was not corrected by the web panel weighting process. This investigation found more significant differences than would be expected if the web panel estimator fully corrected for the bias resulting from the web panel response process. Questions related to certain topics such as politics and voting, sense of belonging, and media consumption were found to have the most significant differences between web panel estimates and recruitment survey estimates.
Release date: 2025-09-08
17. Data-driven Imputation Strategies and their Associated Quality Indicators in Economic Surveys Archived
Articles and reports: 11-522-X202500100011
Description: The use of modern "data"-driven imputation methods to treat non-response in the context of surveys processed in the Integrated Business Statistics Program at Statistics Canada has previously been explored. It was observed that these methods can lead to high quality imputation and further have the potential to result in broad efficiencies when setting up a particular survey's edit and imputation strategy. However, estimation of the associated total variance, more specifically the component due to imputation, remains a challenge. In this article, two methods for estimation of total variance are proposed and show preliminary results that have motivated us to pursue further research in this area.
Release date: 2025-09-08
18. Exploration of Approaches to Small Area Estimation with Measurement Errors and their Application to Indonesian Household Surveys Archived
Articles and reports: 11-522-X202500100028
Description: The United Nations Sustainable Development Goals require detailed, disaggregated data, typically obtained through household surveys. However, surveys alone cannot meet these needs for granular statistics. To address this, National Statistical Institutes adopt small area methods, but these face challenges as auxiliary variables, often derived from surveys, introduce measurement errors into the models. The aim is the application of measurement error correction in classic Fay-Herriot area-level model. The results demonstrate the robustness of the standard approach and ignoring measurement error but show there are specific scenarios where correction for measurement errors is beneficial. The approach is applied to a case study utilizing Indonesian household survey data.
Release date: 2025-09-08
19. On the use of machine learning methods for the treatment of unit nonresponse in surveys
Articles and reports: 12-001-X202500100003
Description: In recent years, there has been a significant interest in machine learning in national statistical offices. Thanks to their flexibility, these methods may prove useful at the nonresponse treatment stage. In this article, we conduct an empirical investigation in order to compare several machine learning procedures in terms of bias and efficiency. In addition to the classical machine learning procedures, we assess the performance of ensemble approaches that make use of different machine learning procedures to produce a set of weights adjusted for nonresponse.
Release date: 2025-06-30
20. Mean squared prediction error estimators of the empirical best linear unbiased predictor of a small area mean under a semi-parametric Fay-Herriot model
Articles and reports: 12-001-X202500100005
Description: In this paper, we derive a second-order unbiased (or nearly unbiased) mean squared prediction error (MSPE) estimator of the empirical best linear unbiased predictor (EBLUP) of a small area mean for a semi-parametric extension to the well-known Fay-Herriot model. Specifically, we derive our MSPE estimator essentially assuming certain moment conditions on both the sampling errors and random effects distributions. The normality-based Prasad-Rao MSPE estimator has a surprising robustness property in that it remains second-order unbiased under the non-normality of random effects when a simple Prasad-Rao method-of-moments estimator is used for the variance component and the sampling error distribution is normal. We show that the normality-based MSPE estimator is no longer second-order unbiased when the sampling error distribution has non-zero kurtosis or when the Fay-Herriot moment method is used to estimate the variance component, even when the sampling error distribution is normal. Interestingly, when the simple method-of moments estimator is used for the variance component, our proposed MSPE estimator does not require the estimation of kurtosis of the random effects. Results of a simulation study on the accuracy of the proposed MSPE estimator, under non-normality of both sampling and random effects distributions, are also presented.
Release date: 2025-06-30

Reference (28)

Reference (28) (0 to 10 of 28 results)

1. A Framework for Projecting Housing Use Associated with Immigrants and Non-Permanent Residents
Surveys and statistical programs – Documentation: 11-633-X2026002
Description: Recent changes in Canada’s immigration levels have heightened interest in understanding how immigration affects housing demand. This article develops a methodological framework for projecting housing use associated with permanent residents (PRs) and non-permanent residents (NPRs) under alternative immigration scenarios. The framework applies observed per capita housing use rates from the Census of Population to estimate incremental housing use by tenure over time.
Release date: 2026-04-24
2. Technical Guide on Demographic Estimates at Statistics Canada
Surveys and statistical programs – Documentation: 91-528-X
Description: The Technical Guide on Demographic Estimates at Statistics Canada provides detailed descriptions of the most current data sources and methods used by the Centre for demography at Statistics Canada to produce demographic estimates as part of the Demographic estimates program. They comprise postcensal and intercensal population estimates; base population; births and deaths; immigrants; emigrants; returning emigrants; non-permanent residents; interprovincial migration; subprovincial estimates of population and intraprovincial migration; population estimates by age and gender; and census family estimates. A glossary of commonly used terms is available at the end of the guide.
Release date: 2025-12-17
3. Sampling and Weighting Technical Report, Census of Population
Surveys and statistical programs – Documentation: 98-306-X
Description:
This report describes sampling, weighting and estimation procedures used in the Census of Population. It provides operational and theoretical justifications for them, and presents the results of the evaluations of these procedures.
Release date: 2023-10-04
4. Effective Income Tax and Transfer Rates: Technical Reference Note
Notices and consultations: 75F0002M2019006
Description:
In 2018, Statistics Canada released two new data tables with estimates of effective tax and transfer rates for individual tax filers and census families. These estimates are derived from the Longitudinal Administrative Databank. This publication provides a detailed description of the methods used to derive the estimates of effective tax and transfer rates.
Release date: 2019-04-16
5. Revisions to 2006 to 2011 income data Archived
Surveys and statistical programs – Documentation: 75F0002M2015003
Description:
This note discusses revised income estimates from the Survey of Labour and Income Dynamics (SLID). These revisions to the SLID estimates make it possible to compare results from the Canadian Income Survey (CIS) to earlier years. The revisions address the issue of methodology differences between SLID and CIS.
Release date: 2015-12-17
6. Methodology for measuring the underground economy by province and territory Archived
Surveys and statistical programs – Documentation: 13-605-X201500414166
Description:
Estimates of the underground economy by province and territory for the period 2007 to 2012 are now available for the first time. The objective of this technical note is to explain how the methodology employed to derive upper-bound estimates of the underground economy for the provinces and territories differs from that used to derive national estimates.
Release date: 2015-04-29
7. Sampling and Weighting Technical Report, National Household Survey, 2011 Archived
Surveys and statistical programs – Documentation: 99-002-X2011001
Description:
This report describes sampling and weighting procedures used in the 2011 National Household Survey. It provides operational and theoretical justifications for them, and presents the results of the evaluation studies of these procedures.
Release date: 2015-01-28
8. Sampling and Weighting Technical Report, National Household Survey
Surveys and statistical programs – Documentation: 99-002-X
Description: This report describes sampling and weighting procedures used in the 2011 National Household Survey. It provides operational and theoretical justifications for them, and presents the results of the evaluation studies of these procedures.
Release date: 2015-01-28
9. 2006 Census Technical Report: Sampling and Weighting
Surveys and statistical programs – Documentation: 92-568-X
Description:
This report describes sampling and weighting procedures used in the 2006 Census. It reviews the history of these procedures in Canadian censuses, provides operational and theoretical justifications for them, and presents the results of the evaluation studies of these procedures.
Release date: 2009-08-11
10. Improvements in 2006 to the Labour Force Survey (LFS) Archived
Surveys and statistical programs – Documentation: 71F0031X2006003
Description:
This paper introduces and explains modifications made to the Labour Force Survey estimates in January 2006. Some of these modifications include changes to the population estimates, improvements to the public and private sector estimates and historical updates to several small Census Agglomerations (CA).
Release date: 2006-01-25

Date modified:: 2026-09-12