Inference and foundations
Filter results by
Search HelpKeyword(s)
Type
Survey or statistical program
Results
All (105)
All (105) (60 to 70 of 105 results)
- Surveys and statistical programs – Documentation: 12-002-X20040027035Description:
As part of the processing of the National Longitudinal Survey of Children and Youth (NLSCY) cycle 4 data, historical revisions have been made to the data of the first 3 cycles, either to correct errors or to update the data. During processing, particular attention was given to the PERSRUK (Person Identifier) and the FIELDRUK (Household Identifier). The same level of attention has not been given to the other identifiers that are included in the data base, the CHILDID (Person identifier) and the _IDHD01 (Household identifier). These identifiers have been created for the public files and can also be found in the master files by default. The PERSRUK should be used to link records between files and the FIELDRUK to determine the household when using the master files.
Release date: 2004-10-05 - 62. Comparison of design-based and model-based methods in analyzing complex health survey data: A case study ArchivedArticles and reports: 11-522-X20020016708Description:
In this paper, we discuss the analysis of complex health survey data by using multivariate modelling techniques. Main interests are in various design-based and model-based methods that aim at accounting for the design complexities, including clustering, stratification and weighting. Methods covered include generalized linear modelling based on pseudo-likelihood and generalized estimating equations, linear mixed models estimated by restricted maximum likelihood, and hierarchical Bayes techniques using Markov Chain Monte Carlo (MCMC) methods. The methods will be compared empirically, using data from an extensive health interview and examination survey conducted in Finland in 2000 (Health 2000 Study).
The data of the Health 2000 Study were collected using personal interviews, questionnaires and clinical examinations. A stratified two-stage cluster sampling design was used in the survey. The sampling design involved positive intra-cluster correlation for many study variables. For a closer investigation, we selected a small number of study variables from the health interview and health examination phases. In many cases, the different methods produced similar numerical results and supported similar statistical conclusions. Methods that failed to account for the design complexities sometimes led to conflicting conclusions. We also discuss the application of the methods in this paper by using standard statistical software products.
Release date: 2004-09-13 - 63. Area-level models using data from multiple surveys ArchivedArticles and reports: 11-522-X20020016717Description:
In the United States, the National Health and Nutrition Examination Survey (NHANES) is linked to the National Health Interview Survey (NHIS) at the primary sampling unit level (the same counties, but not necessarily the same persons, are in both surveys). The NHANES examines about 5,000 persons per year, while the NHIS samples about 100,000 persons per year. In this paper, we present and develop properties of models that allow NHIS and administrative data to be used as auxiliary information for estimating quantities of interest in the NHANES. The methodology, related to Fay-Herriot (1979) small-area models and to calibration estimators in Deville and Sarndal (1992), accounts for the survey designs in the error structure.
Release date: 2004-09-13 - Articles and reports: 11-522-X20020016719Description:
This study takes a look at the modelling methods used for public health data. Public health has a renewed interest in the impact of the environment on health. Ecological or contextual studies ideally investigate these relationships using public health data augmented with environmental characteristics in multilevel or hierarchical models. In these models, individual respondents in health data are the first level and community data are the second level. Most public health data use complex sample survey designs, which require analyses accounting for the clustering, nonresponse, and poststratification to obtain representative estimates of prevalence of health risk behaviours.
This study uses the Behavioral Risk Factor Surveillance System (BRFSS), a state-specific US health risk factor surveillance system conducted by the Center for Disease Control and Prevention, which assesses health risk factors in over 200,000 adults annually. BRFSS data are now available at the metropolitan statistical area (MSA) level and provide quality health information for studies of environmental effects. MSA-level analyses combining health and environmental data are further complicated by joint requirements of the survey sample design and the multilevel analyses.
We compare three modelling methods in a study of physical activity and selected environmental factors using BRFSS 2000 data. Each of the methods described here is a valid way to analyse complex sample survey data augmented with environmental information, although each accounts for the survey design and multilevel data structure in a different manner and is thus appropriate for slightly different research questions.
Release date: 2004-09-13 - 65. An investigation into the development and testing of a methodology for updating census indicators ArchivedArticles and reports: 11-522-X20020016727Description:
The census data are widely used in the distribution and targeting of resources at national, regional and local levels. In the United Kingdom (UK), a population census is conducted every 10 years. As time elapses, the census data become outdated and less relevant, thus making the distribution of resources less equitable. This paper examines alternative methods in rectifying this.
A number of small area methods have been developed for producing postcensal estimates, including the Structural Preserving Estimation technique as a result of Purcell and Kish (1980). This paper develops an alternative approach that is based on a linear mixed modelling approach to producing postcensal estimates. The validity of the methodology is tested on simulated data from the Finnish population register and the technique is applied to producing updated estimates for a number of the 1991 UK census variables.
Release date: 2004-09-13 - Articles and reports: 11-522-X20020016730Description:
A wide class of models of interest in social and economic research can be represented by specifying a parametric structure for the covariances of observed variables. The availability of software, such as LISREL (Jöreskog and Sörbom 1988) and EQS (Bentler 1995), has enabled these models to be fitted to survey data in many applications. In this paper, we consider approaches to inference about such models using survey data derived by complex sampling schemes. We consider evidence of finite sample biases in parameter estimation and ways to reduce such biases (Altonji and Segal 1996) and associated issues of efficiency of estimation, standard error estimation and testing. We use longitudinal data from the British Household Panel Survey for illustration. As these data are subject to attrition, we also consider the issue of how to use nonresponse weights in the modelling.
Release date: 2004-09-13 - Articles and reports: 11-522-X20020016731Description:
Behavioural researchers use a variety of techniques to predict respondent scores on constructs that are not directly observable. Examples of such constructs include job satisfaction, work stress, aptitude for graduate study, children's mathematical ability, etc. The techniques commonly used for modelling and predicting scores on such constructs include factor analysis, classical psychometric scaling and item response theory (IRT), and for each technique there are often several different strategies that can be used to generate individual scores. However, researchers are seldom satisfied with simply measuring these constructs. They typically use the derived scores in multiple regression, analysis of variance and numerous multivariate procedures. Though using predicted scores in this way can result in biased estimates of model parameters, not all researchers are aware of this difficulty. The paper will review the literature on this issue, with particular emphasis on IRT methods. Problems will be illustrated, some remedies suggested, and areas for further research will be identified.
Release date: 2004-09-13 - 68. Inferences for finite populations using multiple data sources with different reference times ArchivedArticles and reports: 11-522-X20020016733Description:
While censuses and surveys are often said to measure populations as they are, most reflect information about individuals as they were at the time of measurement, or even at some prior time point. Inferences from such data therefore should take into account change over time at both the population and individual levels. In this paper, we provide a unifying framework for such inference problems, illustrating it through a diverse series of examples including: (1) estimating residency status on Census Day using multiple administrative records, (2) combining administrative records for estimating the size of the US population, (3) using rolling averages from the American Community Survey, and (4) estimating the prevalence of human rights abuses.
Specifically, at the population level, the estimands of interest, such as the size or mean characteristics of a population, might be changing. At the same time, individual subjects might be moving in and out of the frame of the study or changing their characteristics. Such changes over time can affect statistical studies of government data that combine information from multiple data sources, including censuses, surveys and administrative records, an increasingly common practice. Inferences from the resulting merged databases often depend heavily on specific choices made in combining, editing and analysing the data that reflect assumptions about how populations of interest change or remain stable over time.
Release date: 2004-09-13 - Articles and reports: 11-522-X20020016743Description:
There is much interest in using data from longitudinal surveys to help understand life history processes such as education, employment, fertility, health and marriage. The analysis of data on the durations of spells or sojourns that individuals spend in certain states (e.g., employment, marriage) is a primary tool in studying such processes. This paper examines methods for analysing duration data that address important features associated with longitudinal surveys: the use of complex survey designs in heterogeneous populations; missing or inaccurate information about the timing of events; and the possibility of non-ignorable dropout or censoring mechanisms. Parametric and non-parametric techniques for estimation and for model checking are considered. Both new and existing methodology are proposed and applied to duration data from Canada's Survey of Labour and Income Dynamics (SLID).
Release date: 2004-09-13 - 70. Another look at the regression discontinuity design ArchivedArticles and reports: 11-522-X20020016745Description:
The attractiveness of the Regression Discontinuity Design (RDD) rests on its close similarity to a normal experimental design. On the other hand, it is of limited applicability since it is not often the case that units are assigned to the treatment group on the basis of an observable (to the analyst) pre-program measure. Besides, it only allows identification of the mean impact on a very specific subpopulation. In this technical paper, we show that the RDD straightforwardly generalizes to the instances in which the units' eligibility is established on an observable pre-program measure with eligible units allowed to freely self-select into the program. This set-up also proves to be very convenient for building a specification test on conventional non-experimental estimators of the program mean impact. The data requirements are clearly described.
Release date: 2004-09-13
- Previous Go to previous page of All results
- 1 Go to page 1 of All results
- ...
- 5 Go to page 5 of All results
- 6 Go to page 6 of All results
- 7 (current) Go to page 7 of All results
- 8 Go to page 8 of All results
- 9 Go to page 9 of All results
- 10 Go to page 10 of All results
- 11 Go to page 11 of All results
- Next Go to next page of All results
Data (0)
Data (0) (0 results)
No content available at this time.
Analysis (97)
Analysis (97) (30 to 40 of 97 results)
- Articles and reports: 11-522-X201700014727Description:
"Probability samples of near-universal frames of households and persons, administered standardized measures, yielding long multivariate data records, and analyzed with statistical procedures reflecting the design – these have been the cornerstones of the empirical social sciences for 75 years. That measurement structure have given the developed world almost all of what we know about our societies and their economies. The stored survey data form a unique historical record. We live now in a different data world than that in which the leadership of statistical agencies and the social sciences were raised. High-dimensional data are ubiquitously being produced from Internet search activities, mobile Internet devices, social media, sensors, retail store scanners, and other devices. Some estimate that these data sources are increasing in size at the rate of 40% per year. Together their sizes swamp that of the probability-based sample surveys. Further, the state of sample surveys in the developed world is not healthy. Falling rates of survey participation are linked with ever-inflated costs of data collection. Despite growing needs for information, the creation of new survey vehicles is hampered by strained budgets for official statistical agencies and social science funders. These combined observations are unprecedented challenges for the basic paradigm of inference in the social and economic sciences. This paper discusses alternative ways forward at this moment in history. "
Release date: 2016-03-24 - Articles and reports: 11-522-X201700014738Description:
In the standard design approach to missing observations, the construction of weight classes and calibration are used to adjust the design weights for the respondents in the sample. Here we use these adjusted weights to define a Dirichlet distribution which can be used to make inferences about the population. Examples show that the resulting procedures have better performance properties than the standard methods when the population is skewed.
Release date: 2016-03-24 - Articles and reports: 11-522-X201700014759Description:
Many of the challenges and opportunities of modern data science have to do with dynamic aspects: evolving populations, the growing volume of administrative and commercial data on individuals and establishments, continuous flows of data and the capacity to analyze and summarize them in real time, and the deterioration of data absent the resources to maintain them. With its emphasis on data quality and supportable results, the domain of Official Statistics is ideal for highlighting statistical and data science issues in a variety of contexts. The messages of the talk include the importance of population frames and their maintenance; the potential for use of multi-frame methods and linkages; how the use of large scale non-survey data as auxiliary information shapes the objects of inference; the complexity of models for large data sets; the importance of recursive methods and regularization; and the benefits of sophisticated data visualization tools in capturing change.
Release date: 2016-03-24 - Articles and reports: 11-522-X201300014251Description:
I present a modeller's perspective on the current status quo in official statistics surveys-based inference. In doing so, I try to identify the strengths and weaknesses of the design and model-based inferential positions that survey sampling, at least as far as the official statistics world is concerned, finds itself at present. I close with an example from adaptive survey design that illustrates why taking a model-based perspective (either frequentist or Bayesian) represents the best way for official statistics to avoid the debilitating 'inferential schizophrenia' that seems inevitable if current methodologies are applied to the emerging information requirements of today's world (and possibly even tomorrow's).
Release date: 2014-10-31 - Articles and reports: 11-522-X201300014252Description:
Although estimating finite populations characteristics from probability samples has been very successful for large samples, inferences from non-probability samples may also be possible. Non-probability samples have been criticized due to self-selection bias and the lack of methods for estimating the precision of the estimates. The wide spread access to the Web and the ability to do very inexpensive data collection on the Web has reinvigorated interest in this topic. We review of non-probability sampling strategies and summarize some of the key issues. We then propose conditions under which non-probability sampling may be a reasonable approach. We conclude with ideas for future research.
Release date: 2014-10-31 - Articles and reports: 11-522-X201300014280Description:
During the last decade, web panel surveys have been established as a fast and cost-efficient method in market surveys. The rationale for this is new developments in information technology, in particular the continued rapid growth of internet and computer use among the public. Also growing nonresponse rates and prices forced down in the survey industry lie behind this change. However, there are some serious inherent risks connected with web panel surveys, not least selection bias due to the self-selection of respondents. There are also risks of coverage and measurement errors. The absence of an inferential framework and of data quality indicators is an obstacle against using the web panel approach for high-quality statistics about general populations. Still, there seems to be increasing challenges for some national statistical institutes by a new form of competition for ad hoc statistics and even official statistics from web panel surveys.This paper explores the question of design and use of web panels in a scientifically sound way. An outline is given of a standard from the Swedish Survey Society for performance metrics to assess some quality aspects of results from web panel surveys. Decomposition of bias and mitigation of bias risks are discussed in some detail. Some ideas are presented for combining web panel surveys and traditional surveys to achieve controlled cost-efficient inference.
Release date: 2014-10-31 - 37. Theoretical and empirical properties of model assisted decision-based regression estimators ArchivedArticles and reports: 12-001-X201400114004Description:
In 2009, two major surveys in the Governments Division of the U.S. Census Bureau were redesigned to reduce sample size, save resources, and improve the precision of the estimates (Cheng, Corcoran, Barth and Hogue 2009). The new design divides each of the traditional state by government-type strata with sufficiently many units into two sub-strata according to each governmental unit’s total payroll, in order to sample less from the sub-stratum with small size units. The model-assisted approach is adopted in estimating population totals. Regression estimators using auxiliary variables are obtained either within each created sub-stratum or within the original stratum by collapsing two sub-strata. A decision-based method was proposed in Cheng, Slud and Hogue (2010), applying a hypothesis test to decide which regression estimator is used within each original stratum. Consistency and asymptotic normality of these model-assisted estimators are established here, under a design-based or model-assisted asymptotic framework. Our asymptotic results also suggest two types of consistent variance estimators, one obtained by substituting unknown quantities in the asymptotic variances and the other by applying the bootstrap. The performance of all the estimators of totals and of their variance estimators are examined in some empirical studies. The U.S. Annual Survey of Public Employment and Payroll (ASPEP) is used to motivate and illustrate our study.
Release date: 2014-06-27 - 38. A weighted composite likelihood approach to inference for two-level models from survey data ArchivedArticles and reports: 12-001-X201300211887Description:
Multi-level models are extensively used for analyzing survey data with the design hierarchy matching the model hierarchy. We propose a unified approach, based on a design-weighted log composite likelihood, for two-level models that leads to design-model consistent estimators of the model parameters even when the within cluster sample sizes are small provided the number of sample clusters is large. This method can handle both linear and generalized linear two-level models and it requires level 2 and level 1 inclusion probabilities and level 1 joint inclusion probabilities, where level 2 represents a cluster and level 1 an element within a cluster. Results of a simulation study demonstrating superior performance of the proposed method relative to existing methods under informative sampling are also reported.
Release date: 2014-01-15 - Articles and reports: 82-003-X201300611796Geography: CanadaDescription:
The study assesses the feasibility of using statistical modelling techniques to fill information gaps related to risk factors, specifically, smoking status, in linked long-form census data.
Release date: 2013-06-19 - Articles and reports: 12-001-X201200211758Description:
This paper develops two Bayesian methods for inference about finite population quantiles of continuous survey variables from unequal probability sampling. The first method estimates cumulative distribution functions of the continuous survey variable by fitting a number of probit penalized spline regression models on the inclusion probabilities. The finite population quantiles are then obtained by inverting the estimated distribution function. This method is quite computationally demanding. The second method predicts non-sampled values by assuming a smoothly-varying relationship between the continuous survey variable and the probability of inclusion, by modeling both the mean function and the variance function using splines. The two Bayesian spline-model-based estimators yield a desirable balance between robustness and efficiency. Simulation studies show that both methods yield smaller root mean squared errors than the sample-weighted estimator and the ratio and difference estimators described by Rao, Kovar, and Mantel (RKM 1990), and are more robust to model misspecification than the regression through the origin model-based estimator described in Chambers and Dunstan (1986). When the sample size is small, the 95% credible intervals of the two new methods have closer to nominal confidence coverage than the sample-weighted estimator.
Release date: 2012-12-19
- Previous Go to previous page of Analysis results
- 1 Go to page 1 of Analysis results
- 2 Go to page 2 of Analysis results
- 3 Go to page 3 of Analysis results
- 4 (current) Go to page 4 of Analysis results
- 5 Go to page 5 of Analysis results
- 6 Go to page 6 of Analysis results
- 7 Go to page 7 of Analysis results
- ...
- 10 Go to page 10 of Analysis results
- Next Go to next page of Analysis results
Reference (8)
Reference (8) ((8 results))
- 1. The Potential Use of Remote Sensing to Produce Field Crop Statistics at Statistics Canada ArchivedSurveys and statistical programs – Documentation: 11-522-X201300014259Description:
In an effort to reduce response burden on farm operators, Statistics Canada is studying alternative approaches to telephone surveys for producing field crop estimates. One option is to publish harvested area and yield estimates in September as is currently done, but to calculate them using models based on satellite and weather data, and data from the July telephone survey. However before adopting such an approach, a method must be found which produces estimates with a sufficient level of accuracy. Research is taking place to investigate different possibilities. Initial research results and issues to consider are discussed in this paper.
Release date: 2014-10-31 - Surveys and statistical programs – Documentation: 12-002-X20040027035Description:
As part of the processing of the National Longitudinal Survey of Children and Youth (NLSCY) cycle 4 data, historical revisions have been made to the data of the first 3 cycles, either to correct errors or to update the data. During processing, particular attention was given to the PERSRUK (Person Identifier) and the FIELDRUK (Household Identifier). The same level of attention has not been given to the other identifiers that are included in the data base, the CHILDID (Person identifier) and the _IDHD01 (Household identifier). These identifiers have been created for the public files and can also be found in the master files by default. The PERSRUK should be used to link records between files and the FIELDRUK to determine the household when using the master files.
Release date: 2004-10-05 - 3. Survey of Financial Security - Methodology for Estimating the Value of Employer Pension Plan Benefits ArchivedSurveys and statistical programs – Documentation: 13F0026M2001003Description:
Initial results from the Survey of Financial Security (SFS), which provides information on the net worth of Canadians, were released on March 15 2001, in The daily. The survey collected information on the value of the financial and non-financial assets owned by each family unit and on the amount of their debt.
Statistics Canada is currently refining this initial estimate of net worth by adding to it an estimate of the value of benefits accrued in employer pension plans. This is an important addition to any asset and debt survey as, for many family units, it is likely to be one of the largest assets. With the aging of the population, information on pension accumulations is greatly needed to better understand the financial situation of those nearing retirement. These updated estimates of the Survey of Financial Security will be released in late fall 2001.
The process for estimating the value of employer pension plan benefits is a complex one. This document describes the methodology for estimating that value, for the following groups: a) persons who belonged to an RPP at the time of the survey (referred to as current plan members); b) persons who had previously belonged to an RPP and either left the money in the plan or transferred it to a new plan; c) persons who are receiving RPP benefits.
This methodology was proposed by Hubert Frenken and Michael Cohen. The former has many years of experience with Statistics Canada working with data on employer pension plans; the latter is a principal with the actuarial consulting firm William M. Mercer. Earlier this year, Statistics Canada carried out a public consultation on the proposed methodology. This report includes updates made as a result of feedback received from data users.
Release date: 2001-09-05 - 4. Survey of Financial Security - Estimating the Value of Employer Pension Plan Benefits - A Discussion Paper ArchivedSurveys and statistical programs – Documentation: 13F0026M2001002Description:
The Survey of Financial Security (SFS) will provide information on the net worth of Canadians. In order to do this, information was collected - in May and June 1999 - on the value of the assets and debts of each of the families or unattached individuals in the sample. The value of one particular asset is not easy to determine, or to estimate. That is the present value of the amount people have accrued in their employer pension plan. These plans are often called registered pension plans (RPP), as they must be registered with Canada Customs and Revenue Agency. Although some RPP members receive estimates of the value of their accrued benefit, in most cases plan members would not know this amount. However, it is likely to be one of the largest assets for many family units. And, as the baby boomers approach retirement, information on their pension accumulations is much needed to better understand their financial readiness for this transition.
The intent of this paper is to: present, for discussion, a methodology for estimating the present value of employer pension plan benefits for the Survey of Financial Security; and to seek feedback on the proposed methodology. This document proposes a methodology for estimating the value of employer pension plan benefits for the following groups:a) persons who belonged to an RPP at the time of the survey (referred to as current plan members); b) persons who had previously belonged to an RPP and either left the money in the plan or transferred it to a new plan; c) persons who are receiving RPP benefits.
Release date: 2001-02-07 - Surveys and statistical programs – Documentation: 11-522-X19990015642Description:
The Longitudinal Immigration Database (IMDB) links immigration and taxation administrative records into a comprehensive source of data on the labour market behaviour of the landed immigrant population in Canada. It covers the period 1980 to 1995 and will be updated annually starting with the 1996 tax year in 1999. Statistics Canada manages the database on behalf of a federal-provincial consortium led by Citizenship and Immigration Canada. The IMDB was created specifically to respond to the need for detailed and reliable data on the performance and impact of immigration policies and programs. It is the only source of data at Statistics Canada that provides a direct link between immigration policy levers and the economic performance of immigrants. The paper will examine the issues related to the development of a longitudinal database combining administrative records to support policy-relevant research and analysis. Discussion will focus specifically on the methodological, conceptual, analytical and privacy issues involved in the creation and ongoing development of this database. The paper will also touch briefly on research findings, which illustrate the policy outcome links the IMDB allows policy-makers to investigate.
Release date: 2000-03-02 - Surveys and statistical programs – Documentation: 11-522-X19990015650Description:
The U.S. Manufacturing Plant Ownership Change Database (OCD) was constructed using plant-level data taken from the Census Bureau's Longitudinal Research Database (LRD). It contains data on all manufacturing plants that have experienced ownership change at least once during the period 1963-92. This paper reports the status of the OCD and discuss its research possibilities. For an empirical demonstration, data taken from the database are used to study the effects of ownership changes on plant closure.
Release date: 2000-03-02 - Surveys and statistical programs – Documentation: 11-522-X19990015658Description:
Radon, a naturally occurring gas found at some level in most homes, is an established risk factor for human lung cancer. The U.S. National Research Council (1999) has recently completed a comprehensive evaluation of the health risks of residential exposure to radon, and developed models for projecting radon lung cancer risks in the general population. This analysis suggests that radon may play a role in the etiology of 10-15% of all lung cancer cases in the United States, although these estimates are subject to considerable uncertainty. In this article, we present a partial analysis of uncertainty and variability in estimates of lung cancer risk due to residential exposure to radon in the United States using a general framework for the analysis of uncertainty and variability that we have developed previously. Specifically, we focus on estimates of the age-specific excess relative risk (ERR) and lifetime relative risk (LRR), both of which vary substantially among individuals.
Release date: 2000-03-02 - Geographic files and documentation: 92F0138M1993001Geography: CanadaDescription:
The Geography Divisions of Statistics Canada and the U.S. Bureau of the Census have commenced a cooperative research program in order to foster an improved and expanded perspective on geographic areas and their relevance. One of the major objectives is to determine a common geographic area to form a geostatistical basis for cross-border research, analysis and mapping.
This report, which represents the first stage of the research, provides a list of comparable pairs of Canadian and U.S. standard geographic areas based on current definitions. Statistics Canada and the U.S. Bureau of the Census have two basic types of standard geographic entities: legislative/administrative areas (called "legal" entities in the U.S.) and statistical areas.
The preliminary pairing of geographic areas are based on face-value definitions only. The definitions are based on the June 4, 1991 Census of Population and Housing for Canada and the April 1, 1990 Census of Population and Housing for the U.S.A. The important aspect is the overall conceptual comparability, not the precise numerical thresholds used for delineating the areas.
Data users should use this report as a general guide to compare the census geographic areas of Canada and the United States, and should be aware that differences in settlement patterns and population levels preclude a precise one-to-one relationship between conceptually similar areas. The geographic areas compared in this report provide a framework for further empirical research and analysis.
Release date: 1999-03-05
- Date modified: