Inference and foundations

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Type

1 facets displayed. 1 facets selected.

Geography

1 facets displayed. 0 facets selected.

Survey or statistical program

2 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (97)

All (97) (20 to 30 of 97 results)

  • Articles and reports: 12-001-X202100200006
    Description:

    Sample-based calibration occurs when the weights of a survey are calibrated to control totals that are random, instead of representing fixed population-level totals. Control totals may be estimated from different phases of the same survey or from another survey. Under sample-based calibration, valid variance estimation requires that the error contribution due to estimating the control totals be accounted for. We propose a new variance estimation method that directly uses the replicate weights from two surveys, one survey being used to provide control totals for calibration of the other survey weights. No restrictions are set on the nature of the two replication methods and no variance-covariance estimates need to be computed, making the proposed method straightforward to implement in practice. A general description of the method for surveys with two arbitrary replication methods with different numbers of replicates is provided. It is shown that the resulting variance estimator is consistent for the asymptotic variance of the calibrated estimator, when calibration is done using regression estimation or raking. The method is illustrated in a real-world application, in which the demographic composition of two surveys needs to be harmonized to improve the comparability of the survey estimates.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202000100001
    Description:

    For several decades, national statistical agencies around the world have been using probability surveys as their preferred tool to meet information needs about a population of interest. In the last few years, there has been a wind of change and other data sources are being increasingly explored. Five key factors are behind this trend: the decline in response rates in probability surveys, the high cost of data collection, the increased burden on respondents, the desire for access to “real-time” statistics, and the proliferation of non-probability data sources. Some people have even come to believe that probability surveys could gradually disappear. In this article, we review some approaches that can reduce, or even eliminate, the use of probability surveys, all the while preserving a valid statistical inference framework. All the approaches we consider use data from a non-probability source; data from a probability survey are also used in most cases. Some of these approaches rely on the validity of model assumptions, which contrasts with approaches based on the probability sampling design. These design-based approaches are generally not as efficient; yet, they are not subject to the risk of bias due to model misspecification.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X201800254956
    Description:

    In Italy, the Labor Force Survey (LFS) is conducted quarterly by the National Statistical Institute (ISTAT) to produce estimates of the labor force status of the population at different geographical levels. In particular, ISTAT provides LFS estimates of employed and unemployed counts for local Labor Market Areas (LMAs). LMAs are 611 sub-regional clusters of municipalities and are unplanned domains for which direct estimates have overly large sampling errors. This implies the need of Small Area Estimation (SAE) methods. In this paper, we develop a new area level SAE method that uses a Latent Markov Model (LMM) as linking model. In LMMs, the characteristic of interest, and its evolution in time, is represented by a latent process that follows a Markov chain, usually of first order. Therefore, areas are allowed to change their latent state across time. The proposed model is applied to quarterly data from the LFS for the period 2004 to 2014 and fitted within a hierarchical Bayesian framework using a data augmentation Gibbs sampler. Estimates are compared with those obtained by the classical Fay-Herriot model, by a time-series area level SAE model, and on the basis of data coming from the 2011 Population Census.

    Release date: 2018-12-20

  • Articles and reports: 12-001-X201800154928
    Description:

    A two-phase process was used by the Substance Abuse and Mental Health Services Administration to estimate the proportion of US adults with serious mental illness (SMI). The first phase was the annual National Survey on Drug Use and Health (NSDUH), while the second phase was a random subsample of adult respondents to the NSDUH. Respondents to the second phase of sampling were clinically evaluated for serious mental illness. A logistic prediction model was fit to this subsample with the SMI status (yes or no) determined by the second-phase instrument treated as the dependent variable and related variables collected on the NSDUH from all adults as the model’s explanatory variables. Estimates were then computed for SMI prevalence among all adults and within adult subpopulations by assigning an SMI status to each NSDUH respondent based on comparing his (her) estimated probability of having SMI to a chosen cut point on the distribution of the predicted probabilities. We investigate alternatives to this standard cut point estimator such as the probability estimator. The latter assigns an estimated probability of having SMI to each NSDUH respondent. The estimated prevalence of SMI is the weighted mean of those estimated probabilities. Using data from NSDUH and its subsample, we show that, although the probability estimator has a smaller mean squared error when estimating SMI prevalence among all adults, it has a greater tendency to be biased at the subpopulation level than the standard cut point estimator.

    Release date: 2018-06-21

  • Articles and reports: 12-001-X201700254872
    Description:

    This note discusses the theoretical foundations for the extension of the Wilson two-sided coverage interval to an estimated proportion computed from complex survey data. The interval is shown to be asymptotically equivalent to an interval derived from a logistic transformation. A mildly better version is discussed, but users may prefer constructing a one-sided interval already in the literature.

    Release date: 2017-12-21

  • Articles and reports: 12-001-X201700114822
    Description:

    We use a Bayesian method to infer about a finite population proportion when binary data are collected using a two-fold sample design from small areas. The two-fold sample design has a two-stage cluster sample design within each area. A former hierarchical Bayesian model assumes that for each area the first stage binary responses are independent Bernoulli distributions, and the probabilities have beta distributions which are parameterized by a mean and a correlation coefficient. The means vary with areas but the correlation is the same over areas. However, to gain some flexibility we have now extended this model to accommodate different correlations. The means and the correlations have independent beta distributions. We call the former model a homogeneous model and the new model a heterogeneous model. All hyperparameters have proper noninformative priors. An additional complexity is that some of the parameters are weakly identified making it difficult to use a standard Gibbs sampler for computation. So we have used unimodal constraints for the beta prior distributions and a blocked Gibbs sampler to perform the computation. We have compared the heterogeneous and homogeneous models using an illustrative example and simulation study. As expected, the two-fold model with heterogeneous correlations is preferred.

    Release date: 2017-06-22

  • Articles and reports: 12-001-X201600214662
    Description:

    Two-phase sampling designs are often used in surveys when the sampling frame contains little or no auxiliary information. In this note, we shed some light on the concept of invariance, which is often mentioned in the context of two-phase sampling designs. We define two types of invariant two-phase designs: strongly invariant and weakly invariant two-phase designs. Some examples are given. Finally, we describe the implications of strong and weak invariance from an inference point of view.

    Release date: 2016-12-20

  • Articles and reports: 12-001-X201600114545
    Description:

    The estimation of quantiles is an important topic not only in the regression framework, but also in sampling theory. A natural alternative or addition to quantiles are expectiles. Expectiles as a generalization of the mean have become popular during the last years as they not only give a more detailed picture of the data than the ordinary mean, but also can serve as a basis to calculate quantiles by using their close relationship. We show, how to estimate expectiles under sampling with unequal probabilities and how expectiles can be used to estimate the distribution function. The resulting fitted distribution function estimator can be inverted leading to quantile estimates. We run a simulation study to investigate and compare the efficiency of the expectile based estimator.

    Release date: 2016-06-22

  • Articles and reports: 11-522-X201700014704
    Description:

    We identify several research areas and topics for methodological research in official statistics. We argue why these are important, and why these are the most important ones for official statistics. We describe the main topics in these research areas and sketch what seems to be the most promising ways to address them. Here we focus on: (i) Quality of National accounts, in particular the rate of growth of GNI (ii) Big data, in particular how to create representative estimates and how to make the most of big data when this is difficult or impossible. We also touch upon: (i) Increasing timeliness of preliminary and final statistical estimates (ii) Statistical analysis, in particular of complex and coherent phenomena. These topics are elements in the present Strategic Methodological Research Program that has recently been adopted at Statistics Netherlands

    Release date: 2016-03-24

  • Articles and reports: 11-522-X201700014713
    Description:

    Big data is a term that means different things to different people. To some, it means datasets so large that our traditional processing and analytic systems can no longer accommodate them. To others, it simply means taking advantage of existing datasets of all sizes and finding ways to merge them with the goal of generating new insights. The former view poses a number of important challenges to traditional market, opinion, and social research. In either case, there are implications for the future of surveys that are only beginning to be explored.

    Release date: 2016-03-24
Data (0)

Data (0) (0 results)

No content available at this time.

Analysis (97)

Analysis (97) (0 to 10 of 97 results)

  • Articles and reports: 12-001-X202400100001
    Description: Inspired by the two excellent discussions of our paper, we offer some new insights and developments into the problem of estimating participation probabilities for non-probability samples. First, we propose an improvement of the method of Chen, Li and Wu (2020), based on best linear unbiased estimation theory, that more efficiently leverages the available probability and non-probability sample data. We also develop a sample likelihood approach, similar in spirit to the method of Elliott (2009), that properly accounts for the overlap between both samples when it can be identified in at least one of the samples. We use best linear unbiased prediction theory to handle the scenario where the overlap is unknown. Interestingly, our two proposed approaches coincide in the case of unknown overlap. Then, we show that many existing methods can be obtained as a special case of a general unbiased estimating function. Finally, we conclude with some comments on nonparametric estimation of participation probabilities.
    Release date: 2024-06-25

  • Articles and reports: 12-001-X202400100002
    Description: We provide comparisons among three parametric methods for the estimation of participation probabilities and some brief comments on homogeneous groups and post-stratification.
    Release date: 2024-06-25

  • Articles and reports: 12-001-X202400100003
    Description: Beaumont, Bosa, Brennan, Charlebois and Chu (2024) propose innovative model selection approaches for estimation of participation probabilities for non-probability sample units. We focus our discussion on the choice of a likelihood and parameterization of the model, which are key for the effectiveness of the techniques developed in the paper. We consider alternative likelihood and pseudo-likelihood based methods for estimation of participation probabilities and present simulations implementing and comparing the AIC based variable selection. We demonstrate that, under important practical scenarios, the approach based on a likelihood formulated over the observed pooled non-probability and probability samples performed better than the pseudo-likelihood based alternatives. The contrast in sensitivity of the AIC criteria is especially large for small probability sample sizes and low overlap in covariates domains.
    Release date: 2024-06-25

  • Articles and reports: 12-001-X202400100004
    Description: Non-probability samples are being increasingly explored in National Statistical Offices as an alternative to probability samples. However, it is well known that the use of a non-probability sample alone may produce estimates with significant bias due to the unknown nature of the underlying selection mechanism. Bias reduction can be achieved by integrating data from the non-probability sample with data from a probability sample provided that both samples contain auxiliary variables in common. We focus on inverse probability weighting methods, which involve modelling the probability of participation in the non-probability sample. First, we consider the logistic model along with pseudo maximum likelihood estimation. We propose a variable selection procedure based on a modified Akaike Information Criterion (AIC) that properly accounts for the data structure and the probability sampling design. We also propose a simple rank-based method of forming homogeneous post-strata. Then, we extend the Classification and Regression Trees (CART) algorithm to this data integration scenario, while again properly accounting for the probability sampling design. A bootstrap variance estimator is proposed that reflects two sources of variability: the probability sampling design and the participation model. Our methods are illustrated using Statistics Canada’s crowdsourcing and survey data.
    Release date: 2024-06-25

  • Articles and reports: 12-001-X202400100014
    Description: This paper is an introduction to the special issue on the use of nonprobability samples featuring three papers that were presented at the 29th Morris Hansen Lecture by Courtney Kennedy, Yan Li and Jean-François Beaumont.
    Release date: 2024-06-25

  • Articles and reports: 12-001-X202300200005
    Description: Population undercoverage is one of the main hurdles faced by statistical analysis with non-probability survey samples. We discuss two typical scenarios of undercoverage, namely, stochastic undercoverage and deterministic undercoverage. We argue that existing estimation methods under the positivity assumption on the propensity scores (i.e., the participation probabilities) can be directly applied to handle the scenario of stochastic undercoverage. We explore strategies for mitigating biases in estimating the mean of the target population under deterministic undercoverage. In particular, we examine a split population approach based on a convex hull formulation, and construct estimators with reduced biases. A doubly robust estimator can be constructed if a followup subsample of the reference probability survey with measurements on the study variable becomes feasible. Performances of six competing estimators are investigated through a simulation study and issues which require further investigation are briefly discussed.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200009
    Description: In this paper, we investigate how a big non-probability database can be used to improve estimates of finite population totals from a small probability sample through data integration techniques. In the situation where the study variable is observed in both data sources, Kim and Tam (2021) proposed two design-consistent estimators that can be justified through dual frame survey theory. First, we provide conditions ensuring that these estimators are more efficient than the Horvitz-Thompson estimator when the probability sample is selected using either Poisson sampling or simple random sampling without replacement. Then, we study the class of QR predictors, introduced by Särndal and Wright (1984), to handle the less common case where the non-probability database contains no study variable but auxiliary variables. We also require that the non-probability database is large and can be linked to the probability sample. We provide conditions ensuring that the QR predictor is asymptotically design-unbiased. We derive its asymptotic design variance and provide a consistent design-based variance estimator. We compare the design properties of different predictors, in the class of QR predictors, through a simulation study. This class includes a model-based predictor, a model-assisted estimator and a cosmetic estimator. In our simulation setups, the cosmetic estimator performed slightly better than the model-assisted estimator. These findings are confirmed by an application to La Poste data, which also illustrates that the properties of the cosmetic estimator are preserved irrespective of the observed non-probability sample.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200018
    Description: Sample surveys, as a tool for policy development and evaluation and for scientific, social and economic research, have been employed for over a century. In that time, they have primarily served as tools for collecting data for enumerative purposes. Estimation of these characteristics has been typically based on weighting and repeated sampling, or design-based, inference. However, sample data have also been used for modelling the unobservable processes that gave rise to the finite population data. This type of use has been termed analytic, and often involves integrating the sample data with data from secondary sources.

    Alternative approaches to inference in these situations, drawing inspiration from mainstream statistical modelling, have been strongly promoted. The principal focus of these alternatives has been on allowing for informative sampling. Modern survey sampling, though, is more focussed on situations where the sample data are in fact part of a more complex set of data sources all carrying relevant information about the process of interest. When an efficient modelling method such as maximum likelihood is preferred, the issue becomes one of how it should be modified to account for both complex sampling designs and multiple data sources. Here application of the Missing Information Principle provides a clear way forward.

    In this paper I review how this principle has been applied to resolve so-called “messy” data analysis issues in sampling. I also discuss a scenario that is a consequence of the rapid growth in auxiliary data sources for survey data analysis. This is where sampled records from one accessible source or register are linked to records from another less accessible source, with values of the response variable of interest drawn from this second source, and where a key output is small area estimates for the response variable for domains defined on the first source.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202200200001
    Description:

    Conceptual arguments and examples are presented suggesting that the Bayesian approach to survey inference can address the many and varied challenges of survey analysis. Bayesian models that incorporate features of the complex design can yield inferences that are relevant for the specific data set obtained, but also have good repeated-sampling properties. Examples focus on the role of auxiliary variables and sampling weights, and methods for handling nonresponse. The article offers ten top reasons for favoring the Bayesian approach to survey inference.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200200002
    Description:

    We provide a critical review and some extended discussions on theoretical and practical issues with analysis of non-probability survey samples. We attempt to present rigorous inferential frameworks and valid statistical procedures under commonly used assumptions, and address issues on the justification and verification of assumptions in practical applications. Some current methodological developments are showcased, and problems which require further investigation are mentioned. While the focus of the paper is on non-probability samples, the essential role of probability survey samples with rich and relevant information on auxiliary variables is highlighted.

    Release date: 2022-12-15
Reference (0)

Reference (0) (0 results)

No content available at this time.

Date modified: