Keyword search
Filter results by
Search HelpKeyword(s)
Subject
- Selected: Manufacturing (288)
- Chemicals, plastics and rubber (6)
- Fertilizer production, inventories and shipments (4)
- Food, beverage and tobacco (20)
- Innovative manufacturing plants (83)
- Machinery, computers and electronics (1)
- Non-metallic mineral and metal (13)
- Petroleum and coal (10)
- Technology use (26)
- Textiles, clothing and leather (5)
- Transportation equipment (7)
- Wood, paper and printing (22)
- Other content related to Manufacturing (91)
- Other manufactured products (6)
Type
Year of publication
Geography
Survey or statistical program
Results
All (288)
All (288) (0 to 10 of 288 results)
- Table: 16-10-0015-01Geography: CanadaFrequency: MonthlyDescription:
Historical monthly release of capacity utilization rates for Canadian manufacturers by North American Industry Classification System (NAICS), from January 2017 to the current reference month.
Release date: 2024-09-23 - Table: 16-10-0019-01Geography: Canada, Geographical region of Canada, Province or territoryFrequency: MonthlyDescription:
This table presents a few different variables for over 50 products from the mining industry such as aluminum, cobalt, gold, iron, lead, nickel, silver, etc. The variables available in this table are the quantity produced, the quantity shipped, the closing inventories and the value of shipments. The data are published at the national, provincial and territorial levels.
Release date: 2024-09-20 - Table: 16-10-0020-01Geography: Canada, Geographical region of Canada, Province or territoryFrequency: MonthlyDescription:
This table presents different variables for a dozen of products from the mining industry such as diamonds, clay, gypsum, lime, potash, salt, etc. The variables available in this table are the quantity produced, the quantity shipped and the value of shipments. The data are published at the national, provincial and territorial levels.
Release date: 2024-09-20 - Table: 16-10-0021-01Geography: Canada, Geographical region of Canada, Province or territoryFrequency: MonthlyDescription:
This table presents the value of shipments for multiple mining industry products such as cobalt, gold, iron, lead, platinum, titanium, zinc, diamonds, etc. The data are published at the national, provincial and territorial levels.
Release date: 2024-09-20 - Table: 16-10-0021-02Geography: Canada, Geographical region of Canada, Province or territoryFrequency: MonthlyDescription:
Value of shipments of critical minerals, as defined by the Critical Minerals Centre of Excellence (CMCE) at Natural Resources Canada.
Release date: 2024-09-20 - 6. Manufacturing capacity utilization rates, by North American Industry Classification System (NAICS)Table: 16-10-0012-01Geography: CanadaFrequency: MonthlyDescription: Monthly capacity utilization rates for Canadian manufacturers by North American Industry Classification System (NAICS), from January 2017 to the current reference month.Release date: 2024-09-16
- Table: 16-10-0013-01Geography: CanadaFrequency: MonthlyDescription: Canadian Sales of goods manufactured (shipments), new orders, unfilled orders, inventories, raw materials, goods or work in process, finished goods, and inventory to sales ratios for durable and non-durable goods by North American Industry Classification System (NAICS) for reference periods January 2002 to the current reference month. Not all combinations are available. Values are in constant dollars.Release date: 2024-09-16
- Table: 16-10-0047-01Geography: CanadaFrequency: MonthlyDescription:
Monthly Canadian manufacturers' sales, new orders, unfilled orders, raw materials, goods or work in process, finished goods, total inventories, inventory to sales ratios and finished goods to sales ratios for durable and non-durable goods by North American Industry Classification System (NAICS), in dollars unless otherwise noted. Unadjusted and seasonally adjusted values available from January 1992 to the current reference month.
Release date: 2024-09-16 - Table: 16-10-0047-02Geography: CanadaFrequency: MonthlyDescription:
Monthly manufacturers' sales, inventories, orders and inventory-to-sales ratios, for motor vehicle and motor vehicle parts manufacturing industries, and motor vehicle body and trailer manufacturing industries, in dollars unless otherwise noted.
Release date: 2024-09-16 - Table: 16-10-0109-01Geography: CanadaFrequency: QuarterlyDescription: Quarterly data, by North American Industry Classification System (NAICS).Release date: 2024-09-13
- Previous Go to previous page of All results
- 1 (current) Go to page 1 of All results
- 2 Go to page 2 of All results
- 3 Go to page 3 of All results
- 4 Go to page 4 of All results
- 5 Go to page 5 of All results
- 6 Go to page 6 of All results
- 7 Go to page 7 of All results
- ...
- 29 Go to page 29 of All results
- Next Go to next page of All results
Data (136)
Data (136) (100 to 110 of 136 results)
- Table: 27-10-0232-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Innovation, logging and manufacturing industries, percentage of plants with activities to develop product or process innovations that were abandoned by type of plant and the North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0233-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Survey of innovation, logging and manufacturing industries, non-innovative plants, by reason for not innovating and the North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0234-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Innovation, logging and manufacturing industries, by innovation activities and North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0235-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Innovation, logging and manufacturing industries, percentage of innovative plant's total expenditures devoted to innovation activities by percentage range of expenditures and the North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0236-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Innovation, logging and manufacturing industries, percentage of innovative plants using sources of information that provided information for new innovation projects by sources of information, degree of importance and the North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0237-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Innovation, logging and manufacturing industries, percentage of innovative plants that cooperated on innovation activities with other firms, by North American Industry Classification System (NAICS) for provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0240-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Survey of innovation, logging and manufacturing industries, percentage of innovative plants, by type of co-operative arrangements and geographic location of cooperation partners and the North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0241-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Survey of innovation, logging and manufacturing industries, percentage of innovative plants, by location of cooperation partners, type of co-operative arrangements and the North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0242-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Innovation, logging and manufacturing industries, percentage of innovative plants, by the most valuable type of co-operation partner for innovation activities, co-operative arrangements and the North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Table: 27-10-0243-01Geography: Canada, Province or territoryFrequency: OccasionalDescription: Innovation, logging and manufacturing industries, percentage of innovative plants indicating importance of impacts from product or process innovations introduced by impact of innovation, degree of importance and the North American Industry Classification System (NAICS) for Canada, provinces and territories in 2005. (Terminated)Release date: 2015-06-25
- Previous Go to previous page of Data results
- 1 Go to page 1 of Data results
- ...
- 8 Go to page 8 of Data results
- 9 Go to page 9 of Data results
- 10 Go to page 10 of Data results
- 11 (current) Go to page 11 of Data results
- 12 Go to page 12 of Data results
- 13 Go to page 13 of Data results
- 14 Go to page 14 of Data results
- Next Go to next page of Data results
Analysis (152)
Analysis (152) (40 to 50 of 152 results)
- 41. Long-term Productivity Growth in Manufacturing in Canada and the United States, 1961 to 2003 ArchivedArticles and reports: 15-206-X2007015Geography: CanadaDescription:
In this paper, we provide an international comparison of the growth in Canadian and U.S. manufacturing industries over the 1961-to-2003 period. We find that average annual growth rates of labour productivity growth were almost identical in the Canadian and U.S. manufacturing sectors during this period. But the sources of labour productivity growth differed in the two countries. Intermediate input deepening was a more important source of labour productivity growth in Canada than in the United States, while investment in capital and multifactor productivity (MFP) growth were more important in the United States than in Canada. After 1996, labour productivity growth in Canada was lower than in the United States. The post-1996 slower labour productivity growth in Canada relative to the United States was due to slower growth in MFP and slower growth in capital intensity. The slower MFP growth in Canada accounted for 60% of Canada - United States labour productivity growth difference, and slower growth in capital intensity accounted for 30%. The slower MFP growth in the Canadian manufacturing sector relative to that of the United States after 1996 was due to lower MFP growth in the computer and electronic products industry. The slower growth in capital'labour ratio in the Canadian manufacturing compared with the United States after 1996 is related to the changes in relative prices of capital and labour inputs in the two countries.
Release date: 2007-12-18 - Articles and reports: 11-622-M2007016Geography: CanadaDescription:
This paper summarizes the results of several research studies conducted by the Micro-economic Analysis Division of Statistics Canada that investigate the impact of advanced technology use on business performance. These studies combine establishment-level survey data on advanced technology practices with longitudinal data that measure changes in relative performance. Together, these studies provide strong evidence that technology strategies have considerable bearing on competitive outcomes after other correlates of plant performance are taken into account. Advanced communications technologies warrant special emphasis, as the use of these technologies has been shown to be closely associated with changes in relative productivity.
Release date: 2007-12-05 - Articles and reports: 11-010-X200701110382Geography: CanadaDescription:
Exports to China in 2007 have risen faster than imports, reflecting its voracious appetite for resources. This has helped reduce Canada's dependence on US markets.
Release date: 2007-11-08 - 44. Five types of innovation in Canadian manufacturing: First results from the Survey of Innovation 2005 ArchivedArticles and reports: 88-003-X200700210316Geography: CanadaDescription:
The most recent Statistics Canada Survey of Innovation (2005) distinguished five types of innovation. The questions on types of innovation were redesigned in response to the 1997 revision of the Oslo Manual, which incorporated new insights on innovation in the service industries, and broadened the concept of process innovation to include not only production processes but also methods of product delivery. This article examines the five different types of innovation in Canadian manufacturing establishments and industry groups.
Release date: 2007-10-09 - 45. Motives for co-operation in innovation: Evidence from the 2005 Canadian Survey of Innovation ArchivedArticles and reports: 88-003-X200700210317Geography: CanadaDescription:
This article summarizes the findings of an econometric study using data from the 2005 Canadian Survey of Innovation. The study looked at the decision of firms in the Canadian manufacturing sector to co-operate on innovation projects. The analysis reveals that the factors influencing the decision to co-operate in order to access external knowledge are very similar to those influencing cost-sharing motives. It also finds that public funding leads firms to co-operate in order to access external knowledge and research and development (R&D).
Release date: 2007-10-09 - 46. Not Dutch Disease, It's China Syndrome ArchivedArticles and reports: 11-624-M2007017Geography: CanadaDescription:
This paper empirically investigates how the Canadian economy has evolved following the rise in commodity prices and appreciation of the Canadian dollar that began in 2003. The adjustment in the manufacturing industry has garnered the greatest attention because it has borne the brunt of job losses. However, the adjustment of the manufacturing industry has not been straightforward. Rather, a complex reallocation has been taking place within manufacturing that has been predominantly due to the integration of emerging nations into the global economy. The increased commodity prices and falling manufactured prices caused by this integration have affected durable and non-durable manufacturing industries differently. Non-durable manufacturers have tended to see their competitiveness eroded and their output has tended to fall. Durable manufacturers, on the other hand, have increased output in response to the resource boom and increased demand in general. The result has been stable manufacturing output overall, accompanied by a re-orientation of manufacturing output away from non-durables and toward durables.
The appreciated dollar and higher commodity prices have also led to a more widespread industrial reallocation in Canada. The higher commodity prices have started a resource boom, particularly in Alberta. The boom has led to rising resource industry employment, while manufacturing employment declined, and to rising service-sector employment. It has contributed to inter-provincial migration, and has greatly increased the purchasing power of Canadian incomes as terms of trade have improved.
Release date: 2007-08-16 - Articles and reports: 11F0027M2007044Geography: CanadaDescription:
Utilizing a longitudinal micro data file of manufacturing plants (1974 to 1999), this study tests the effect of higher levels of trade on the level of industrial specialization experienced by regional manufacturing economies. Consistent with trade driven by comparative advantage, the analysis demonstrates that higher levels of export intensity (exports as a share of output) across regions are associated with greater industrial specialization. However, the analysis also shows that changes in export intensity are only weakly associated with changes in specialization. This occurs because comparative advantage tends to shift away from industries that account for a large share of regional manufacturing employment and towards industries that initially have lower shares. This ebb and flow of comparative advantage helps to explain why Canadian manufacturing regions have not become more specialized in an environment of increasing integration into the world market.
Release date: 2007-06-25 - 48. Urban Economies and Productivity ArchivedArticles and reports: 11F0027M2007045Geography: CanadaDescription:
Productivity levels and productivity growth rates vary significantly over space. These differences are perhaps most pronounced between countries, but they remain acutely evident within national spaces as economic growth favors some cities and regions and not others. In this paper, we map the spatial variation in productivity levels across Canadian cities and we model the underlying determinants of that variation. We have two main goals. First, to confirm the existence, the nature and the size of agglomeration economies, that is, the gains in efficiency related to the spatial clustering of economic activity. We focus attention on the impacts of buyer-supplier networks, labour market pooling and knowledge spillovers. Second, we identify the geographical extent of knowledge spillovers using information on the location of individual manufacturing plants. Plant-level data developed by the Micro-economic Analysis Division of Statistics Canada underpin the analysis. After controlling for a series of plant and firm characteristics, analysis reveals that the productivity performance of plants is positively influenced by all three of Marshall's mechanisms of agglomeration (Marshall, 1920). The analysis also shows that the effect of knowledge spillovers on productivity is spatially circumscribed, extending, at most, only 10 km beyond individual plants. The reliance of individual businesses on place-based economies varies across the sectors to which the businesses are aggregated. These sectors are defined by the factors that influence the process of competition'access to natural resources, labour costs, scale economies, product differentiation, and the application of scientific knowledge. Neither labour market pooling, buyer-supplier networks nor knowledge spillovers are universally important across all sectors. This paper provides confirmation of the importance of agglomeration, while also providing evidence that external economies are spatially bounded and not universally important across all industries.
Release date: 2007-06-18 - 49. The Canadian Lumber Industry: Recent Trends ArchivedArticles and reports: 11-621-M2007055Geography: CanadaDescription:
This study examines recent trends in the Canadian softwood lumber industry in Canada up to 2006. Trends in shipments, production, exports, productivity, innovation and financial results are analysed in the context of recent economic and commercial pressures affecting the industry.
Release date: 2007-06-07 - 50. Canada's changing auto industry ArchivedArticles and reports: 11-010-X20070059639Geography: CanadaDescription:
The auto industry has been a leading force in globalization, with overseas firms shifting production to North America following their success in sales. This paper looks at how Canada fared in attracting new domestic plants, and whether they behaved differently in buying parts locally and trading internationally.
Release date: 2007-05-17
- Previous Go to previous page of Analysis results
- 1 Go to page 1 of Analysis results
- 2 Go to page 2 of Analysis results
- 3 Go to page 3 of Analysis results
- 4 Go to page 4 of Analysis results
- 5 (current) Go to page 5 of Analysis results
- 6 Go to page 6 of Analysis results
- 7 Go to page 7 of Analysis results
- ...
- 16 Go to page 16 of Analysis results
- Next Go to next page of Analysis results
Reference (0)
Reference (0) (0 results)
No content available at this time.
- Date modified: