Keyword search

Skip to main content
Skip to footer

Language selection

Français

Search and menus

Search and menus

Search

Results

All (83)

All (83) (0 to 10 of 83 results)

1. Technological Frontiers and Post-2000 Productivity Growth in Canada
Articles and reports: 11F0019M2020001
Description:
Multifactor productivity (MFP) declined in Canada from 2000 to 2009 and then recovered after. The movements in productivity since 2000 have attracted great attention from researchers and policy makers because productivity is important both for economic growth and for improvements in living standards. This paper applies the stochastic frontier framework to decompose each firm’s MFP into two parts: its technological frontier and its technical efficiency. Change in the aggregate technological frontier refers to improvements in the productivity potential of an economy, i.e., the maximum productivity of an economy if all firms are fully efficient. Aggregate technical efficiency reflects the economy’s capacity to achieve that potential. The results of this decomposition can show whether the movements in productivity after 2000 in Canada were mainly the result of changes in the technological frontier and productivity potential or of changes in the technical efficiency.
Release date: 2020-01-17
2. Technological Change in the Private and Public Sectors Archived
Articles and reports: 88F0006X2009004
Description:
This paper provides an analysis of technological change within the Canadian economy based on data from the 2006 Survey of Electronic Commerce and Technology where firms indicated how they introduced significantly improved technologies. The paper explores differences in the use of methods of introduction of significantly improved technologies by firm/organization size and by industry in both the private and public sectors.
The paper begins with a brief presentation of previous work carried out on technology introduction. The methodology is described. A description of concepts used in the analysis will follow. Analytic results examining technological change in the private sector overall, by industry and by size, and the public sector overall, by industry and by size are presented. A comparison of technological change in the private and public sectors follows. The paper concludes with a discussion of analytic results and further analytic work that could be undertaken.
Release date: 2009-11-19
3. Organizational and technological improvements in Canadian firms and organizations, 2004 to 2006 Archived
Articles and reports: 88-003-X200800210739
Geography: Canada
Description:
The 2006 Survey of Electronic Commerce and Technology (SECT) included two questions that dealt with the issues of organizational and technological change. This article will examine organizational and technological change in the private and public sectors, providing the first look at this cross-economy data. An upcoming article will explore the relationship between the introduction of significantly improved organizational structures, management techniques, or technology and the training associated with implementation of these changes.
Release date: 2008-11-21
4. Innovative Exporters and Intellectual Property Regimes in Selected Service Industries: Evidence from the Canadian Survey of Innovation 2003 Archived
Articles and reports: 88F0006X2008001
Description:
This study compares the characteristics of innovative exporting firms using formal intellectual property (IP) regimes and those using informal intellectual property regimes. Two service industry groups are examined: Information and Communication Technology (ICT) and Selected Professional, Scientific and Technical Services. The data are based on the 2003 Survey of Innovation
Release date: 2008-02-29
5. New Economy: Using National Accounting Architecture to Estimate the Size of the High-technology Economy Archived
Articles and reports: 11-622-M2007015
Geography: Canada
Description:
This paper illustrates how the statistical architecture of Canada's System of National Accounts can be utilized to study the size and composition of a specific economic sector. For illustrative purposes, the analysis focuses on the information and communications technology (ICT) sector, and hence, on the set of technology-producing industries and technology outputs most commonly associated with what is often termed the high-technology economy. Using supply and use tables from the input-output accounts, we develop integrated ICT industry and commodity classifications that link domestic technology producers to their principal commodity outputs. We then use these classifications to generate a series of descriptive statistics that examine the size of Canada's high-technology economy along with its underlying composition. In our view, these integrated ICT classifications can be used to develop a richer profile of the high-technology economy than one obtains from examining its industry or commodity dimensions in isolation.
Release date: 2007-12-21
6. Investment and Long-term Productivity Growth in the Canadian Business Sector, 1961 to 2002 Archived
Articles and reports: 15-206-X2007006
Geography: Canada
Description:
This paper employs the databases that are used to construct Statistics Canada's Productivity Accounts to examine the sources of growth in the Canadian economy and the history of productivity growth in Canada over the period 1961 to 2002. It makes use of a new time series using the North American Industry Classification System. The growth accounting system provides the framework for the analysis. This framework provides estimates of the relative importance of labour inputs, investments in capital, and productivity growth. The data that are required to address this issue also allow changes in the composition of capital and labour inputs to be investigated. In addition, the underlying factors that determine labour productivity (multifactor productivity, capital deepening, and increases in skill level) are outlined. Since the database is constructed at the industry level, all these relationships can be pursued both at the level of the total economy and for individual industries.
Release date: 2007-01-12
7. Training through the ages Archived
Articles and reports: 75-001-X200611013173
Geography: Canada
Description:
Rapid technological change and an increased emphasis on skill-based knowledge have led to an increased need for training entry-level workers and retraining older ones. How do the training rates of workers aged 25 to 34 compare with those aged 55 to 64? Personal and job-related characteristics are examined for training participants, as are employer support, self-directed learning, barriers faced, and objectives and outcomes of training.
Release date: 2006-12-20
8. Education and earnings Archived
Articles and reports: 75-001-X200610613165
Geography: Canada
Description:
Between 1980 and 2000, and particularly the latter half of the 1990s, the earnings gap widened between young workers who were less-educated and those who were well-educated. Some research attributes the gap to technological change, which requires a workforce that is more skilled and better educated. The subsequent demand resulted in higher wages for such workers and hence increased returns to education. However, the past five years have seen strong job growth in industries that employ many young people with less education. How has the earnings gap been affected?
Release date: 2006-09-19
9. Conceptualizing and Measuring Business Incubation Archived
Articles and reports: 88F0006X2006006
Description:
This paper conceptualizes business incubation and translates theoretical ideas into measurable metrics. Specifically, it explains and develops the concept, discusses the influence of major economic and technological events on its evolution, identifies different models and explains how business incubators create value. It then explains how these concepts have been implemented in Statistics Canada's first survey of business incubators.
Release date: 2006-07-24
10. Global Links: The Benefits to Domestically-controlled Plants from Inward Direct Investment - The Role of Vertical Linkages Archived
Articles and reports: 11-622-M2006010
Geography: Canada
Description:
Using data on manufacturing plants operating in Canada for the period 1981 to 1997, we estimate the effect of changes in the level of foreign control upon labour productivity in domestically-controlled plants. We distinguish between foreign control in own industry of domestically-controlled plants and foreign control in industries linked by their supply or use of intermediate inputs. We find that foreign control increases productivity growth in domestically-controlled plants in a way that is consistent with the transfer of technology from foreign suppliers to domestically-controlled plants. The positive productivity effects of foreign control are more pronounced for those plants that outsource more intermediates, and who purchase science-based intermediate inputs (i.e., electronics, machinery and equipment, and chemicals).
Release date: 2006-04-13

Data (0)

Data (0) (0 results)

No content available at this time.

Analysis (83)

Analysis (83) (0 to 10 of 83 results)

1. Technological Frontiers and Post-2000 Productivity Growth in Canada
Articles and reports: 11F0019M2020001
Description:
Multifactor productivity (MFP) declined in Canada from 2000 to 2009 and then recovered after. The movements in productivity since 2000 have attracted great attention from researchers and policy makers because productivity is important both for economic growth and for improvements in living standards. This paper applies the stochastic frontier framework to decompose each firm’s MFP into two parts: its technological frontier and its technical efficiency. Change in the aggregate technological frontier refers to improvements in the productivity potential of an economy, i.e., the maximum productivity of an economy if all firms are fully efficient. Aggregate technical efficiency reflects the economy’s capacity to achieve that potential. The results of this decomposition can show whether the movements in productivity after 2000 in Canada were mainly the result of changes in the technological frontier and productivity potential or of changes in the technical efficiency.
Release date: 2020-01-17
2. Technological Change in the Private and Public Sectors Archived
Articles and reports: 88F0006X2009004
Description:
This paper provides an analysis of technological change within the Canadian economy based on data from the 2006 Survey of Electronic Commerce and Technology where firms indicated how they introduced significantly improved technologies. The paper explores differences in the use of methods of introduction of significantly improved technologies by firm/organization size and by industry in both the private and public sectors.
The paper begins with a brief presentation of previous work carried out on technology introduction. The methodology is described. A description of concepts used in the analysis will follow. Analytic results examining technological change in the private sector overall, by industry and by size, and the public sector overall, by industry and by size are presented. A comparison of technological change in the private and public sectors follows. The paper concludes with a discussion of analytic results and further analytic work that could be undertaken.
Release date: 2009-11-19
3. Organizational and technological improvements in Canadian firms and organizations, 2004 to 2006 Archived
Articles and reports: 88-003-X200800210739
Geography: Canada
Description:
The 2006 Survey of Electronic Commerce and Technology (SECT) included two questions that dealt with the issues of organizational and technological change. This article will examine organizational and technological change in the private and public sectors, providing the first look at this cross-economy data. An upcoming article will explore the relationship between the introduction of significantly improved organizational structures, management techniques, or technology and the training associated with implementation of these changes.
Release date: 2008-11-21
4. Innovative Exporters and Intellectual Property Regimes in Selected Service Industries: Evidence from the Canadian Survey of Innovation 2003 Archived
Articles and reports: 88F0006X2008001
Description:
This study compares the characteristics of innovative exporting firms using formal intellectual property (IP) regimes and those using informal intellectual property regimes. Two service industry groups are examined: Information and Communication Technology (ICT) and Selected Professional, Scientific and Technical Services. The data are based on the 2003 Survey of Innovation
Release date: 2008-02-29
5. New Economy: Using National Accounting Architecture to Estimate the Size of the High-technology Economy Archived
Articles and reports: 11-622-M2007015
Geography: Canada
Description:
This paper illustrates how the statistical architecture of Canada's System of National Accounts can be utilized to study the size and composition of a specific economic sector. For illustrative purposes, the analysis focuses on the information and communications technology (ICT) sector, and hence, on the set of technology-producing industries and technology outputs most commonly associated with what is often termed the high-technology economy. Using supply and use tables from the input-output accounts, we develop integrated ICT industry and commodity classifications that link domestic technology producers to their principal commodity outputs. We then use these classifications to generate a series of descriptive statistics that examine the size of Canada's high-technology economy along with its underlying composition. In our view, these integrated ICT classifications can be used to develop a richer profile of the high-technology economy than one obtains from examining its industry or commodity dimensions in isolation.
Release date: 2007-12-21
6. Investment and Long-term Productivity Growth in the Canadian Business Sector, 1961 to 2002 Archived
Articles and reports: 15-206-X2007006
Geography: Canada
Description:
This paper employs the databases that are used to construct Statistics Canada's Productivity Accounts to examine the sources of growth in the Canadian economy and the history of productivity growth in Canada over the period 1961 to 2002. It makes use of a new time series using the North American Industry Classification System. The growth accounting system provides the framework for the analysis. This framework provides estimates of the relative importance of labour inputs, investments in capital, and productivity growth. The data that are required to address this issue also allow changes in the composition of capital and labour inputs to be investigated. In addition, the underlying factors that determine labour productivity (multifactor productivity, capital deepening, and increases in skill level) are outlined. Since the database is constructed at the industry level, all these relationships can be pursued both at the level of the total economy and for individual industries.
Release date: 2007-01-12
7. Training through the ages Archived
Articles and reports: 75-001-X200611013173
Geography: Canada
Description:
Rapid technological change and an increased emphasis on skill-based knowledge have led to an increased need for training entry-level workers and retraining older ones. How do the training rates of workers aged 25 to 34 compare with those aged 55 to 64? Personal and job-related characteristics are examined for training participants, as are employer support, self-directed learning, barriers faced, and objectives and outcomes of training.
Release date: 2006-12-20
8. Education and earnings Archived
Articles and reports: 75-001-X200610613165
Geography: Canada
Description:
Between 1980 and 2000, and particularly the latter half of the 1990s, the earnings gap widened between young workers who were less-educated and those who were well-educated. Some research attributes the gap to technological change, which requires a workforce that is more skilled and better educated. The subsequent demand resulted in higher wages for such workers and hence increased returns to education. However, the past five years have seen strong job growth in industries that employ many young people with less education. How has the earnings gap been affected?
Release date: 2006-09-19
9. Conceptualizing and Measuring Business Incubation Archived
Articles and reports: 88F0006X2006006
Description:
This paper conceptualizes business incubation and translates theoretical ideas into measurable metrics. Specifically, it explains and develops the concept, discusses the influence of major economic and technological events on its evolution, identifies different models and explains how business incubators create value. It then explains how these concepts have been implemented in Statistics Canada's first survey of business incubators.
Release date: 2006-07-24
10. Global Links: The Benefits to Domestically-controlled Plants from Inward Direct Investment - The Role of Vertical Linkages Archived
Articles and reports: 11-622-M2006010
Geography: Canada
Description:
Using data on manufacturing plants operating in Canada for the period 1981 to 1997, we estimate the effect of changes in the level of foreign control upon labour productivity in domestically-controlled plants. We distinguish between foreign control in own industry of domestically-controlled plants and foreign control in industries linked by their supply or use of intermediate inputs. We find that foreign control increases productivity growth in domestically-controlled plants in a way that is consistent with the transfer of technology from foreign suppliers to domestically-controlled plants. The positive productivity effects of foreign control are more pronounced for those plants that outsource more intermediates, and who purchase science-based intermediate inputs (i.e., electronics, machinery and equipment, and chemicals).
Release date: 2006-04-13

Reference (0)

Reference (0) (0 results)

No content available at this time.

Report a problem or mistake on this page

Date modified:: 2024-06-04