Keyword search
Filter results by
Search HelpKeyword(s)
Subject
- Business performance and ownership (1)
- Children and youth (1)
- Economic accounts (1)
- Education, training and learning (3)
- Families, households and marital status (1)
- Immigration and ethnocultural diversity (1)
- Income, pensions, spending and wealth (1)
- Labour (6)
- Manufacturing (1)
- Science and technology (1)
- Statistical methods (10)
Survey or statistical program
Results
All (16)
All (16) (0 to 10 of 16 results)
- Articles and reports: 11F0019M2001180Geography: Province or territoryDescription:
This study examines provincial differences in productivity (GDP per job) using decomposition and regression analysis. In the first stage of the study, the relative size of productivity differences across provinces is examined. Then, these differences are decomposed into two components - the first is the portion of the difference that arises from industry-mix, and the second is due to "real" productivity differences at the industry level. The paper also examines the contributions of the "new" and "old" economy sectors to differences in provincial productivity. Finally, regression analysis is performed in order to determine the statistical significance of interprovincial productivity differences. The paper finds that British Columbia, Alberta, Saskatchewan, Ontario and Quebec do not differ significantly from another in terms of GDP per job after differences in industry mix are considered. Manitoba and the Atlantic Provinces lag behind the others. Most of the difference in the latter two cases stems from "real" differences at the industry level rather than from the effect of differences in industry mix. The Natural Resources sector plays an important role in bolstering the performance of Alberta and Saskatchewan.
Release date: 2001-12-06 - 2. Patterns of Advanced Manufacturing Technology (AMT) Use in Canadian Manufacturing: 1998 AMT Survey Results ArchivedArticles and reports: 88F0017M2001012Geography: CanadaDescription:
This report covers the use and planned use of 26 advanced manufacturing technologies (AMTs) at the establishment level. Additional information on skill requirements, technology development and implementation practices, results of technology adoption, barriers to adoption and firms' research and development activities was obtained from the 1998 Survey of Advanced Technologies in Canadian Manufacturing.
Release date: 2001-11-29 - Articles and reports: 11F0019M2001178Geography: CanadaDescription: The school performance of the children of immigrants in the Canadian school system is analyzed using data from the first three waves of the National Longitudinal Survey of Children and Youth (NLSCY). School performance is measured in terms of ability at reading, writing, mathematics and overall aptitude. The parents' and teachers' assessments of the children's performances are used, as are the results of formal testing. On average, children of immigrants generally do at least as well as the children of the Canadian-born along each dimension of school performance. The children of immigrant parents whose first language is either English or French have especially high outcomes. The children of other immigrant parents have lower performance in reading, writing and composition but their performance in mathematics is comparable to that of the children of Canadian-born parents. It is also found that with more years in the Canadian education system, the performance of these children in reading, writing and mathematics improves and is equal to or greater than the performance of the children of Canadian-born parents by age thirteen in virtually all areas of performance.Release date: 2001-11-14
- Articles and reports: 11F0019M2001176Geography: CanadaDescription:
Since the Job Vacancy Survey conducted by Statistics Canada between 1971 and 1978, there is no data which directly measures job vacancies in Canada. Using data from the 1999 Workplace and Employee Survey (WES), we attempt to fill this gap. We study the determinants of job vacancies at the location level. We find that workplaces with high vacancy rates consist of at least two types: 1) those employing a highly skilled workforce, innovating, adopting new technologies increasing skill requirements, facing significant international competition and operating in tight local labour markets, and 2) those which are non-unionized, operate in retail trade and consumer services industries and are not part of a multi-location firm. As a result, a substantial share of job vacancies are not in the high-technology sectors. More than 40% of all job vacancies and 50% of long-term vacancies originate from retail trade and consumer services industries.
Release date: 2001-11-01 - Articles and reports: 81-003-X20000045861Geography: CanadaDescription:
This study looks at why graduates decide to change jobs.
Release date: 2001-09-07 - Articles and reports: 81-003-X20000045862Geography: Province or territoryDescription:
This study examines factors influencing academic performance of Grade 3 students in Ontario, using data from standardized tests administered in 1997 by the province's Education Quality and Accountability Office (EQAO).
Release date: 2001-09-07 - 7. Regression composite estimation for the Canadian Labour Force Survey with a rotating panel design ArchivedArticles and reports: 12-001-X20010015852Description:
We consider the regression composite estimation introduced by Singh (1994, 1996; termed earlier as "modified regression composite" estimation), a version of which (suggested by Fuller 1999) has been implemented for the Canadian Labour Force Survey (CLFS) beginning in January 2000. The regression composite (rc) estimator enhances the generalized regression (gr) estimator used earlier for the CLFS and the well known Gurney-Daly ak-composite estimator in several ways.
Release date: 2001-08-22 - Articles and reports: 12-001-X20010015853Description:
The Canadian Labour Force Survey is a monthly survey of households selected according to a stratified multistage design. The sample of households is divided into six panels (rotation groups). A panel remains in the sample for six consecutive months and is then dropped from the sample. In the past, a generalized regression estimator, based only on the current month's data, has been implemented with a regression weights program. In this paper, we study regression composite estimation procedures that make use of sample information from previous periods and that can be implemented with a regression weights program.
Release date: 2001-08-22 - Articles and reports: 12-001-X20010015854Description:
This paper looks at a range of estimators applicable to a regularly repeated household survey with controlled overlap between successive surveys. The paper shows how the Best Linear Unbiased Estimator (BLUE) based on a fixed window of time points can be improved by applying the technique of generalised regression. This improved estimator is compared to the AK estimator of Gurney and Daly (1965) and the modified regression estimator of Singh, Kennedy, Wu and Brisebois (1997), using data from the Australian Labour Force Survey.
Release date: 2001-08-22 - 10. Regression composite estimation for the Canadian Labour Force Survey: Evaluation and implementation ArchivedArticles and reports: 12-001-X20010015855Description:
The Canadian Labour Force Survey (LFS) is a monthly survey with a complex rotating panel design. After extensive studies, including the investigation of a number of alternative methods for exploiting the sample overlap to improve the quality of estimates, the LFS has chosen a composite estimation method which achieves this goal while satisfying practical constraints. In addition, for variables where there is a substantial gain in efficiency, the new time series tend to make more sense from a subject-matter perspective. This makes it easier to explain LFS estimates to users and the media. Because of the reduced variance under composite estimation, for some variables it is now possible to publish monthly estimates where only three-month moving averages were published in the past. In addition, a greater number of series can be successfully seasonally adjusted.
Release date: 2001-08-22
Data (0)
Data (0) (0 results)
No content available at this time.
Analysis (16)
Analysis (16) (0 to 10 of 16 results)
- Articles and reports: 11F0019M2001180Geography: Province or territoryDescription:
This study examines provincial differences in productivity (GDP per job) using decomposition and regression analysis. In the first stage of the study, the relative size of productivity differences across provinces is examined. Then, these differences are decomposed into two components - the first is the portion of the difference that arises from industry-mix, and the second is due to "real" productivity differences at the industry level. The paper also examines the contributions of the "new" and "old" economy sectors to differences in provincial productivity. Finally, regression analysis is performed in order to determine the statistical significance of interprovincial productivity differences. The paper finds that British Columbia, Alberta, Saskatchewan, Ontario and Quebec do not differ significantly from another in terms of GDP per job after differences in industry mix are considered. Manitoba and the Atlantic Provinces lag behind the others. Most of the difference in the latter two cases stems from "real" differences at the industry level rather than from the effect of differences in industry mix. The Natural Resources sector plays an important role in bolstering the performance of Alberta and Saskatchewan.
Release date: 2001-12-06 - 2. Patterns of Advanced Manufacturing Technology (AMT) Use in Canadian Manufacturing: 1998 AMT Survey Results ArchivedArticles and reports: 88F0017M2001012Geography: CanadaDescription:
This report covers the use and planned use of 26 advanced manufacturing technologies (AMTs) at the establishment level. Additional information on skill requirements, technology development and implementation practices, results of technology adoption, barriers to adoption and firms' research and development activities was obtained from the 1998 Survey of Advanced Technologies in Canadian Manufacturing.
Release date: 2001-11-29 - Articles and reports: 11F0019M2001178Geography: CanadaDescription: The school performance of the children of immigrants in the Canadian school system is analyzed using data from the first three waves of the National Longitudinal Survey of Children and Youth (NLSCY). School performance is measured in terms of ability at reading, writing, mathematics and overall aptitude. The parents' and teachers' assessments of the children's performances are used, as are the results of formal testing. On average, children of immigrants generally do at least as well as the children of the Canadian-born along each dimension of school performance. The children of immigrant parents whose first language is either English or French have especially high outcomes. The children of other immigrant parents have lower performance in reading, writing and composition but their performance in mathematics is comparable to that of the children of Canadian-born parents. It is also found that with more years in the Canadian education system, the performance of these children in reading, writing and mathematics improves and is equal to or greater than the performance of the children of Canadian-born parents by age thirteen in virtually all areas of performance.Release date: 2001-11-14
- Articles and reports: 11F0019M2001176Geography: CanadaDescription:
Since the Job Vacancy Survey conducted by Statistics Canada between 1971 and 1978, there is no data which directly measures job vacancies in Canada. Using data from the 1999 Workplace and Employee Survey (WES), we attempt to fill this gap. We study the determinants of job vacancies at the location level. We find that workplaces with high vacancy rates consist of at least two types: 1) those employing a highly skilled workforce, innovating, adopting new technologies increasing skill requirements, facing significant international competition and operating in tight local labour markets, and 2) those which are non-unionized, operate in retail trade and consumer services industries and are not part of a multi-location firm. As a result, a substantial share of job vacancies are not in the high-technology sectors. More than 40% of all job vacancies and 50% of long-term vacancies originate from retail trade and consumer services industries.
Release date: 2001-11-01 - Articles and reports: 81-003-X20000045861Geography: CanadaDescription:
This study looks at why graduates decide to change jobs.
Release date: 2001-09-07 - Articles and reports: 81-003-X20000045862Geography: Province or territoryDescription:
This study examines factors influencing academic performance of Grade 3 students in Ontario, using data from standardized tests administered in 1997 by the province's Education Quality and Accountability Office (EQAO).
Release date: 2001-09-07 - 7. Regression composite estimation for the Canadian Labour Force Survey with a rotating panel design ArchivedArticles and reports: 12-001-X20010015852Description:
We consider the regression composite estimation introduced by Singh (1994, 1996; termed earlier as "modified regression composite" estimation), a version of which (suggested by Fuller 1999) has been implemented for the Canadian Labour Force Survey (CLFS) beginning in January 2000. The regression composite (rc) estimator enhances the generalized regression (gr) estimator used earlier for the CLFS and the well known Gurney-Daly ak-composite estimator in several ways.
Release date: 2001-08-22 - Articles and reports: 12-001-X20010015853Description:
The Canadian Labour Force Survey is a monthly survey of households selected according to a stratified multistage design. The sample of households is divided into six panels (rotation groups). A panel remains in the sample for six consecutive months and is then dropped from the sample. In the past, a generalized regression estimator, based only on the current month's data, has been implemented with a regression weights program. In this paper, we study regression composite estimation procedures that make use of sample information from previous periods and that can be implemented with a regression weights program.
Release date: 2001-08-22 - Articles and reports: 12-001-X20010015854Description:
This paper looks at a range of estimators applicable to a regularly repeated household survey with controlled overlap between successive surveys. The paper shows how the Best Linear Unbiased Estimator (BLUE) based on a fixed window of time points can be improved by applying the technique of generalised regression. This improved estimator is compared to the AK estimator of Gurney and Daly (1965) and the modified regression estimator of Singh, Kennedy, Wu and Brisebois (1997), using data from the Australian Labour Force Survey.
Release date: 2001-08-22 - 10. Regression composite estimation for the Canadian Labour Force Survey: Evaluation and implementation ArchivedArticles and reports: 12-001-X20010015855Description:
The Canadian Labour Force Survey (LFS) is a monthly survey with a complex rotating panel design. After extensive studies, including the investigation of a number of alternative methods for exploiting the sample overlap to improve the quality of estimates, the LFS has chosen a composite estimation method which achieves this goal while satisfying practical constraints. In addition, for variables where there is a substantial gain in efficiency, the new time series tend to make more sense from a subject-matter perspective. This makes it easier to explain LFS estimates to users and the media. Because of the reduced variance under composite estimation, for some variables it is now possible to publish monthly estimates where only three-month moving averages were published in the past. In addition, a greater number of series can be successfully seasonally adjusted.
Release date: 2001-08-22
Reference (0)
Reference (0) (0 results)
No content available at this time.