Keyword search
Filter results by
Search HelpKeyword(s)
Subject
Type
Year of publication
Results
All (23)
All (23) (0 to 10 of 23 results)
- Articles and reports: 11F0019M2020005Description:
Understanding intangible investments is essential for providing accurate measures of gross fixed capital formation (GFCF), gross domestic product (GDP) and productivity growth, and for understanding the innovation system. Statistical agencies need measures of intangible investment to produce economic statistics on aggregate activity that accurately measure concepts such as GDP, GFCF or savings. The levels of GDP, GFCF and savings will be underestimated to the extent that expenditures are incorrectly classified as intermediate inputs that are fully consumed during the period being measured—and not as investments that are not fully consumed during the period when the expenditures are incurred. Estimates for GDP and productivity growth rates may be similarly underestimated. This paper updates and expands upon the intangible capital estimates presented by Baldwin et al. (2009), who extended already measured intangibles (i.e., research and development [R&D], software, mineral exploration) to include additional asset classes consistent with international research on intangible capital measurement (see Corrado, Hulten and Sichel 2009).
Release date: 2020-02-12 - Articles and reports: 11F0019M2020001Description:
Multifactor productivity (MFP) declined in Canada from 2000 to 2009 and then recovered after. The movements in productivity since 2000 have attracted great attention from researchers and policy makers because productivity is important both for economic growth and for improvements in living standards. This paper applies the stochastic frontier framework to decompose each firm’s MFP into two parts: its technological frontier and its technical efficiency. Change in the aggregate technological frontier refers to improvements in the productivity potential of an economy, i.e., the maximum productivity of an economy if all firms are fully efficient. Aggregate technical efficiency reflects the economy’s capacity to achieve that potential. The results of this decomposition can show whether the movements in productivity after 2000 in Canada were mainly the result of changes in the technological frontier and productivity potential or of changes in the technical efficiency.
Release date: 2020-01-17 - Articles and reports: 11-626-X2014038Description:
This article in the Economic Insights series describes the results of a data linkage project that created experimental long-term estimates of firm entry and exit rates for the Canadian business sector. It is part of a series of papers that examines firm dynamics using micro-economic data.
Release date: 2014-08-25 - Articles and reports: 15-206-X2013030Geography: Canada, Province or territoryDescription:
This paper provides a provincial perspective on the slowdown in productivity and economic growth in the total business sector in Canada between 2000 and 2010 compared to the late 1990s. It uses the most recent provincial multifactor productivity database.
Release date: 2013-04-17 - Articles and reports: 11F0027M2012078Geography: CanadaDescription:
This paper asks how market expansion contributes to productivity growth. It investigates whether entry to both new international markets and new domestic markets is associated with greater productivity growth. It also examines whether exit from export markets is necessarily associated with deteriorating performance or whether it too can lead to success when associated with movements to new markets. Finally, the paper examines the strategy of firms that move to new markets after they withdraw from export markets in order to examine the differences that set them apart from their counterparts that do not find themselves able to adapt because they simply withdraw to their home domestic markets.
Release date: 2012-03-20 - 6. Export Growth, Capacity Utilization and Productivity Growth: Evidence from Canadian Manufacturing Plants ArchivedArticles and reports: 11F0027M2011075Geography: CanadaDescription:
Labour productivity growth in the Canadian business sector slowed substantially after 2000. Most of the slowdown occurred in the manufacturing sector. This paper examines how this slowdown was associated with the restructuring that occurred in manufacturing as a result of the increase in excess capacity, the dramatic increase in the Canada-U.S. exchange rate and a slowdown in export growth.
Release date: 2011-12-12 - 7. Firm Turnover and Productivity Growth in Selected Canadian Services Industries, 2000 to 2007 ArchivedArticles and reports: 11F0027M2011072Geography: CanadaDescription:
The nature of the competitive process that causes a reallocation of market shares within an industry contributes to aggregate productivity growth. This paper extends our understanding of industry differences in the competitive process by examining firm turnover and productivity growth in various services industries in Canada and situating them relative to retailing and manufacturing, two industries which have been the focus of these studies in the past. Seven industries in the services sector, namely wholesale trade, transportation and warehousing, air transportation, truck transportation, broadcasting and telecommunications, business services and financial services, are examined.
Release date: 2011-08-19 - 8. Export Market Dynamics and Plant-level Productivity: Impact of Tariff Reductions and Exchange Rate Cycles ArchivedArticles and reports: 11F0027M2010063Geography: CanadaDescription:
This paper examines how trade liberalization and fluctuations in real exchange rates affect export-market entry/exit and plant-level productivity. It uses the experience of Canadian manufacturing plants over three separate periods that featuring different rates of bilateral tariff reduction and differing movements in bilateral real exchange rates. The patterns of entry and exit responses as well as the productivity outcomes differ markedly in the three periods. Consistent with much of the recent literature, the paper finds that plants self-select into export markets-that is, more efficient plants are more likely to enter and less likely to exit export markets. The reverse also occurs: entrants to export markets improve their productivity performance relative to the population from which they originated and plants that stay in export markets do better than comparable plants that exited, lending support to the thesis that exporting boosts productivity. Finally, we find that overall market access conditions, including real exchange rate trends, significantly affect the extent of productivity gains to be derived from participating in export markets. In particular, the increase in the value of the Canadian dollar during the post-2002 period almost completely offset the productivity growth advantages that new export-market participants would otherwise have enjoyed.
Release date: 2010-06-25 - 9. Cyclical changes in output and employment ArchivedArticles and reports: 11-010-X200900510867Geography: CanadaDescription:
An examination of whether turning points in employment lag output, and whether employers hoard labour during cyclical downturns.
Release date: 2009-05-14 - Articles and reports: 11F0027M2008051Geography: CanadaDescription:
This paper investigates the productivity effects of the Canada-United States Free Trade Agreement (FTA) on Canadian manufacturing. It finds that Canadian tariff cuts increased exit rates among moderately productive non-exporting plants. This led to the reallocation of market share toward highly productive plants, which helps explain why aggregate productivity gains were observed when Canadian tariffs were reduced. The paper also finds that all of the within-plant productivity gains resulting from the U.S. tariff cuts involved exporters and, especially, new entrants into the export market. It demonstrates that any lack of output responses and labour-shedding as a consequence of the FTA were experienced by Canadian plants who were non-exporters, while exporters captured the gains from the FTA.
Release date: 2008-05-07
Data (0)
Data (0) (0 results)
No content available at this time.
Analysis (22)
Analysis (22) (0 to 10 of 22 results)
- Articles and reports: 11F0019M2020005Description:
Understanding intangible investments is essential for providing accurate measures of gross fixed capital formation (GFCF), gross domestic product (GDP) and productivity growth, and for understanding the innovation system. Statistical agencies need measures of intangible investment to produce economic statistics on aggregate activity that accurately measure concepts such as GDP, GFCF or savings. The levels of GDP, GFCF and savings will be underestimated to the extent that expenditures are incorrectly classified as intermediate inputs that are fully consumed during the period being measured—and not as investments that are not fully consumed during the period when the expenditures are incurred. Estimates for GDP and productivity growth rates may be similarly underestimated. This paper updates and expands upon the intangible capital estimates presented by Baldwin et al. (2009), who extended already measured intangibles (i.e., research and development [R&D], software, mineral exploration) to include additional asset classes consistent with international research on intangible capital measurement (see Corrado, Hulten and Sichel 2009).
Release date: 2020-02-12 - Articles and reports: 11F0019M2020001Description:
Multifactor productivity (MFP) declined in Canada from 2000 to 2009 and then recovered after. The movements in productivity since 2000 have attracted great attention from researchers and policy makers because productivity is important both for economic growth and for improvements in living standards. This paper applies the stochastic frontier framework to decompose each firm’s MFP into two parts: its technological frontier and its technical efficiency. Change in the aggregate technological frontier refers to improvements in the productivity potential of an economy, i.e., the maximum productivity of an economy if all firms are fully efficient. Aggregate technical efficiency reflects the economy’s capacity to achieve that potential. The results of this decomposition can show whether the movements in productivity after 2000 in Canada were mainly the result of changes in the technological frontier and productivity potential or of changes in the technical efficiency.
Release date: 2020-01-17 - Articles and reports: 11-626-X2014038Description:
This article in the Economic Insights series describes the results of a data linkage project that created experimental long-term estimates of firm entry and exit rates for the Canadian business sector. It is part of a series of papers that examines firm dynamics using micro-economic data.
Release date: 2014-08-25 - Articles and reports: 15-206-X2013030Geography: Canada, Province or territoryDescription:
This paper provides a provincial perspective on the slowdown in productivity and economic growth in the total business sector in Canada between 2000 and 2010 compared to the late 1990s. It uses the most recent provincial multifactor productivity database.
Release date: 2013-04-17 - Articles and reports: 11F0027M2012078Geography: CanadaDescription:
This paper asks how market expansion contributes to productivity growth. It investigates whether entry to both new international markets and new domestic markets is associated with greater productivity growth. It also examines whether exit from export markets is necessarily associated with deteriorating performance or whether it too can lead to success when associated with movements to new markets. Finally, the paper examines the strategy of firms that move to new markets after they withdraw from export markets in order to examine the differences that set them apart from their counterparts that do not find themselves able to adapt because they simply withdraw to their home domestic markets.
Release date: 2012-03-20 - 6. Export Growth, Capacity Utilization and Productivity Growth: Evidence from Canadian Manufacturing Plants ArchivedArticles and reports: 11F0027M2011075Geography: CanadaDescription:
Labour productivity growth in the Canadian business sector slowed substantially after 2000. Most of the slowdown occurred in the manufacturing sector. This paper examines how this slowdown was associated with the restructuring that occurred in manufacturing as a result of the increase in excess capacity, the dramatic increase in the Canada-U.S. exchange rate and a slowdown in export growth.
Release date: 2011-12-12 - 7. Firm Turnover and Productivity Growth in Selected Canadian Services Industries, 2000 to 2007 ArchivedArticles and reports: 11F0027M2011072Geography: CanadaDescription:
The nature of the competitive process that causes a reallocation of market shares within an industry contributes to aggregate productivity growth. This paper extends our understanding of industry differences in the competitive process by examining firm turnover and productivity growth in various services industries in Canada and situating them relative to retailing and manufacturing, two industries which have been the focus of these studies in the past. Seven industries in the services sector, namely wholesale trade, transportation and warehousing, air transportation, truck transportation, broadcasting and telecommunications, business services and financial services, are examined.
Release date: 2011-08-19 - 8. Export Market Dynamics and Plant-level Productivity: Impact of Tariff Reductions and Exchange Rate Cycles ArchivedArticles and reports: 11F0027M2010063Geography: CanadaDescription:
This paper examines how trade liberalization and fluctuations in real exchange rates affect export-market entry/exit and plant-level productivity. It uses the experience of Canadian manufacturing plants over three separate periods that featuring different rates of bilateral tariff reduction and differing movements in bilateral real exchange rates. The patterns of entry and exit responses as well as the productivity outcomes differ markedly in the three periods. Consistent with much of the recent literature, the paper finds that plants self-select into export markets-that is, more efficient plants are more likely to enter and less likely to exit export markets. The reverse also occurs: entrants to export markets improve their productivity performance relative to the population from which they originated and plants that stay in export markets do better than comparable plants that exited, lending support to the thesis that exporting boosts productivity. Finally, we find that overall market access conditions, including real exchange rate trends, significantly affect the extent of productivity gains to be derived from participating in export markets. In particular, the increase in the value of the Canadian dollar during the post-2002 period almost completely offset the productivity growth advantages that new export-market participants would otherwise have enjoyed.
Release date: 2010-06-25 - 9. Cyclical changes in output and employment ArchivedArticles and reports: 11-010-X200900510867Geography: CanadaDescription:
An examination of whether turning points in employment lag output, and whether employers hoard labour during cyclical downturns.
Release date: 2009-05-14 - Articles and reports: 11F0027M2008051Geography: CanadaDescription:
This paper investigates the productivity effects of the Canada-United States Free Trade Agreement (FTA) on Canadian manufacturing. It finds that Canadian tariff cuts increased exit rates among moderately productive non-exporting plants. This led to the reallocation of market share toward highly productive plants, which helps explain why aggregate productivity gains were observed when Canadian tariffs were reduced. The paper also finds that all of the within-plant productivity gains resulting from the U.S. tariff cuts involved exporters and, especially, new entrants into the export market. It demonstrates that any lack of output responses and labour-shedding as a consequence of the FTA were experienced by Canadian plants who were non-exporters, while exporters captured the gains from the FTA.
Release date: 2008-05-07
Reference (1)
Reference (1) ((1 result))
- Surveys and statistical programs – Documentation: 15-206-X2008017Description:
This paper provides an overview of the productivity program at Statistics Canada and a brief description of Canada's productivity performance. The paper defines productivity and the various measures that are used to investigate different aspects of productivity growth. It describes the difference between partial productivity measures (such as labour productivity) and a more complete measure (multifactor productivity) and the advantages and disadvantages of each. The paper explains why productivity is important. It outlines how productivity growth fits into the growth accounting framework and how this framework is used to examine the various sources of economic growth. The paper briefly discusses the challenges that face statisticians in measuring productivity growth. It also provides an overview of Canada's long-term productivity performance and compares Canada to the United States - both in terms of productivity levels and productivity growth rates.
Release date: 2008-02-25
- Date modified: