Keyword search

View results

Filter results by

Search Help
Currently selected filters that can be removed
Remove Remove "Economic accounts" filterRemove Remove "Canada" filter
Clear all

Keyword(s)

Subject

Type

4 facets displayed. 0 facets selected.

Year of publication

24 facets displayed. 0 facets selected.

Geography

8 facets displayed. 1 facets selected.

Survey or statistical program

69 facets displayed. 0 facets selected.

Portal

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (922)

All (922) (860 to 870 of 922 results)

  • 861. A Frontier Approach to Canada-U.S. Multifactor Productivity Performance Archived
    Articles and reports: 11F0027M2003010
    Geography: Canada
    Description:

    This research paper explores the productivity gap between Canada and the United States. It constructs a North American frontier for the business sector and manufacturing sectors based on data from the two countries.

    Release date: 2003-03-31
  • 862. Year-end review [2002] Archived
    Articles and reports: 11-010-X20030036501
    Geography: Canada
    Description:

    This article examines financial markets, business investment, household spending, interest rates, taxes, the job market and other economic developments in Canada and around the world in 2002. These factors are seen against longer-term trends in our society, such as an aging population and the increasing education of women.

    Release date: 2003-03-20
  • 863. Environmental Management and Technologies in the Business Sector Archived
    Journals and periodicals: 16F0024X
    Geography: Canada
    Description:

    Businesses today are involved in a variety of practices aimed at preventing or reducing environmental degradation generated from their production activity. During the 1990s, the environmental regulation context changed. Increasingly, governments have relied on voluntary initiatives undertaken by businesses to reduce pollutants and waste, as opposed to regulations. However, at the same time, the federal authorities have undertaken to revise the Canadian Environmental Protection Act (CEPA), in order to increase federal power for environmental regulation but with strong emphasis put on promoting pollution prevention. Consequently, businesses today are looking at alternative ways to limit impacts from their operations on the environment.

    Environmental Management and Technologies in the Business Sector presents a profile of business demand for environmental processes and technologies, pollution prevention methods and environmental practices, such as environmental management systems and voluntary actions. What types of treatment processes are the most popular ones for reducing gas emissions, liquid, solid and hazardous waste, noise, radiation and vibration, for saving energy or for site reclamation? What is the market for environmental processes and technologies? What pollution prevention methods are used more frequently? What additional environmental practices have businesses adopted (for instance, are voluntary programs more popular than eco-labelling?)?

    This paper is based on results from the Survey of Environmental Protection Expenditures. For the first time, the survey asked detailed questions on the type of environmental process or technology used and the adoption of environmental practices. The paper is a complement to both 1996-1997 and 1998 Environmental Protection Expenditures in the Business Sector reports (Catalogue no. 16F0006XIE).

    Release date: 2002-12-20
  • 864. National tourism indicators - 1999 results Archived
    Articles and reports: 87-403-X20010015956
    Geography: Canada
    Description:

    In 1999, Canada's travel account balance (including passenger fares), the difference between the expenditures of foreign visitors in the country and those of Canadian residents outside the country, measured its lowest deficit since 1988, declining to $3.0 billion.

    Release date: 2001-10-12
  • 865. Foreign Affiliate Trade Statistics: Measuring Economic Globalization Archived
    Articles and reports: 67F0001M2001021
    Geography: Canada
    Description:

    This paper examines some of the fundamental issues behind foreign affiliate trade statistics (FATS), including what they are, who needs them and why they have become so important, and Statistics Canada's plan for collecting FATS.

    Release date: 2001-10-11
  • 866. Foreign Direct Investment: A Driving Force in Economic Globalization Archived
    Articles and reports: 67F0001M2001020
    Geography: Canada
    Description:

    This paper offers a Canadian viewpoint of globalization by presenting the concepts and main trends of foreign direct investment issues.

    Release date: 2001-08-27
  • 867. International transactions in services, commercial services, by selected countries and regions Archived
    Table: 36-10-0070-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 70 series, with data for years 1990 - 2000 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), Selected countries and regions (35 items: International institutions;Oceania;Central America and Antilles ...), Commercial services, receipts and payments (2 items: Receipts;Payments ...).
    Release date: 2001-06-27
  • 868. Interprovincial and international trade flows at producer prices [1992 - 1999] Archived
    Table: 12-10-0085-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: This table contains 8955 series, with data for years 1992 - 1999 (not all combinations necessarily have data for all years), and was last released on 2001-04-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (16 items: Canada;Newfoundland and Labrador;Prince Edward Island;Nova Scotia ...), Trade flow detail (23 items: Total supply and demand;Total demand;To Newfoundland and Labrador;Total supply ...), Goods and services (54 items: Grains;Other agricultural products;Forestry products;Fish; seafood and trapping products ...).
    Release date: 2001-04-20
  • 869. Labour Productivity Differences Between Domestic and Foreign-controlled Establishments in the Canadian Manufacturing Sector Archived
    Articles and reports: 11F0019M2000118
    Geography: Canada
    Description:

    This study uses data to study differences in labour productivity gains across domestic and foreign-controlled establishments in the manufacturing sector for the period 1973 to 1993. In doing so, it also examines the extent to which labour productivity differences exist between small and large establishments and across industry sectors and how they have been changing over time.

    The analysis consists of three parts. In the first section, the connection between labour usage and output is examined. This analysis investigates differences in marginal labour propensities for the different subgroups in the short and long-run. Here volatility is seen to be lower for foreign-controlled establishments. The second section examines the difference between the growth in average labour productivity for the same groups. Here foreign-controlled establishments are seen to have the highest growth rates. The third section investigates whether any trend can be found in the rates of growth for large and small, domestic and foreign establishments and finds that these differences have been increasing over time.

    Release date: 2000-03-01
  • 870. Government transfer payments to persons, annual, 1926 - 1990 Archived
    Table: 36-10-0284-01
    Geography: Canada, Province or territory
    Frequency: Annual
    Description: This table contains 15 series, with data for years 1926 - 1990 (not all combinations necessarily have data for all years), and was last released on 2000-02-19. This table contains data described by the following dimensions (Not all combinations are available): Geography (15 items: Canada; Newfoundland and Labrador; Nova Scotia; Prince Edward Island ...), Transfer payments (1 items: Government transfer payments to persons ...).
    Release date: 2000-02-19
Data (747)

Data (747) (20 to 30 of 747 results)

Analysis (175)

Analysis (175) (10 to 20 of 175 results)

  • 11. Productivity Growth in the Canadian Broadcasting and Telecommunications Industry: Evidence from Micro Data Archived
    Articles and reports: 11F0027M2014089
    Geography: Canada
    Description:

    This paper examines two aspects of productivity growth in Canada's broadcasting and telecommunications industry. The first is the extent to which aggregate MFP growth in the sector came from scale economies as opposed to technical progress. The second is the extent to which aggregate labour productivity growth and MFP growth came from within-firm growth, and from the effect of reallocation due to firm entry and exit and within incumbents' the dynamic forces associated with competitive change.

    Release date: 2014-02-06
  • 12. The Distribution of Gross Domestic Product and Hours Worked in Canada and the United States Across Firm Size Classes Archived
    Articles and reports: 11F0027M2014088
    Geography: Canada
    Description:

    This paper compares the relative importance of small and large firms in the business sectors of Canada and the United States from 2002 to 2008 using estimates of the contribution of small and large firms to the gross domestic product (GDP) of each country. It then makes use of estimates of labour input for comparison purposes. In this paper, small firms are defined as those with fewer than 500 employees and large firms as those with 500 or more employees.

    Release date: 2014-01-08
  • 13. Productivity Growth and Capacity Utilization in Canadian Business Industries Archived
    Articles and reports: 11-626-X2013031
    Geography: Canada
    Description:

    This article in the Economic Insights series reports the impact of correcting for variations in capacity utilization on multifactor productivity growth in Canadian business industries. It is based on a recently released Statistics Canada research paper. Results show that multifactor productivity growth is procyclical for almost all business industries, and that such pro-cyclicality largely reflects variations in capacity utilization in some industries, especially in manufacturing and mining.

    Release date: 2013-10-04
  • 14. Recent Developments in the Canadian Economy: Fall 2013 Archived
    Articles and reports: 11-626-X2013030
    Geography: Canada
    Description:

    This article in the Economic Insights series provides users with an integrated summary of recent changes in output, employment, household demand, international trade and prices. Organized as a statistical summary of major indicators, the report is designed to inform about recent developments in the Canadian economy, highlighting changes in the economic data during the first half of 2013. Unless otherwise noted, the tabulations presented in this report are based on seasonally-adjusted data available in CANSIM on September 17, 2013.

    Release date: 2013-09-30
  • 15. Productivity Growth and Capacity Utilization Archived
    Articles and reports: 11F0027M2013085
    Geography: Canada
    Description:

    This paper presents a non-parametric approach for adjusting the multifactor productivity growth (MFPG) measure for variations in capacity utilization over time. In the framework developed here, a capital utilization measure is derived from the economic theory of production and is estimated by comparing the ex-post return with the ex-ante expected return on capital. The non-parametric approach is then compared with the parametric approach and the standard growth accounting framework. Both the non-parametric and parametric approaches correct for the cyclical bias in the standard MFPG measure, but the non-parametric approach offers more practical adjustment for capacity utilization, because it is easier to implement and more in line with the non-parametric approach long used by statistical agencies and researchers.

    Release date: 2013-07-23
  • 16. The 1981 to 2012 revisions of the Income and Expenditure Accounts Archived
    Stats in brief: 13-605-X201300411818
    Geography: Canada
    Description:

    Revised estimates of the Income and Expenditure Accounts (IEA) covering the period 1981 to 2012 have been released along with those for the first quarter of 2013. These revised estimates incorporate the most current source data and seasonal patterns.

    Release date: 2013-06-07
  • 17. Recent Developments in the Canadian Economy: Spring 2013 Archived
    Articles and reports: 11-626-X2013023
    Geography: Canada
    Description:

    This article in the Economic Insights series provides users with a concise, integrated summary of recent changes in output, employment, household demand, international trade and prices. Organized as a statistical summary of major indicators, the report is designed to inform about ongoing developments in the Canadian economy, highlighting changes in the economic data during late 2012 and early 2013. Unless otherwise noted, the data presented in this report are seasonally adjusted, and all data are available in CANSIM.

    Release date: 2013-05-01
  • 18. Productivity and Economic Growth in the Canadian Provinces, 1997 to 2010 Archived
    Articles and reports: 15-206-X2013030
    Geography: Canada, Province or territory
    Description:

    This paper provides a provincial perspective on the slowdown in productivity and economic growth in the total business sector in Canada between 2000 and 2010 compared to the late 1990s. It uses the most recent provincial multifactor productivity database.

    Release date: 2013-04-17
  • 19. Changes in the Composition of Aggregate Investment Archived
    Articles and reports: 11-626-X2013022
    Geography: Canada
    Description:

    This Economic Insights article reports on the composition of capital expenditures in Canada. It highlights major changes in the distribution of aggregate capital spending over the last decade, as investments in structural assets accelerated in resource-based regions. The article also discusses the new preliminary actual estimates for 2012 and the investment intentions for 2013. It is one of a series of Economic Insights articles designed to facilitate ongoing assessments of the Canadian economy.

    Release date: 2013-02-27
  • 20. Urban Productivity: Who Benefits from Agglomeration Economies? Archived
    Articles and reports: 11F0027M2013084
    Geography: Canada
    Description:

    There is abundant evidence that many firms cluster together in space and that there is an association between clustering and productivity. This paper moves beyond identifying the broad effects of clustering and explores how different types of firms benefit from agglomeration. It advances research on agglomeration by showing, first, that not all firms gain to the same degree from co-location and, second, that businesses with different internal capabilities capture different forms of geographical externalities. The empirical analysis focuses on Canadian manufacturing establishments operating over the period from 1989 to 1999.

    Release date: 2013-02-06
Reference (0)

Reference (0) (0 results)

No content available at this time.

Sort Help

How are the results ordered?

The Sort by feature provides four options:

  • By date – sorts results by product release date starting with the most recent.
  • By most popular – gives priority to results that are most frequently selected by users, followed by the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Sort Help

How are the results ordered?

The Sort by feature provides three options:

  • By date – sorts results by product release date starting with the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Search Help

How do I use the filters and the search box?

  • You can initiate a search by entering keywords or selecting filters (e.g., under Subject, Geography, etc.) on the left side of the page.

  • Filters can be used together or in any combination. Each time you select a filter, the results on the page are updated.

  • To start a new search, click on the Clear all button above the search box or deselect each filter.

  • Specified keywords and filters appear above the search box. You can deselect any or all the tags to refine or clear your search.

How do I refine my search?

  • You can enter keywords in the search box. It is not necessary to use “+” or “, “ or “AND”.

  • You can delete some or all of the keywords from your search string.

  • Quotes around keywords limit the search to a specific phrase.

    • For example, “labour force survey” will limit results to products containing this phrase.

  • Use “or” between keywords to obtain results that contain one or more search terms.

    • For example, labour or­ force or survey will limit results to products containing any or all of these words.

How does the search work?

  • This search looks for results that have your query term in the title, description, subject, geography, product number or other information about the product.

    • For example, when searching the term ‘Diseases’, all results with the word ‘Diseases’ in the title, description or tagged the subject appear.

  • The text within an article or publication are not searched. For full text searching of articles, use the site search.

Date modified: