Keyword search

Description:

Principal statistics for the motor vehicle and motor vehicle parts manufacturing, motor vehicle body and trailer manufacturing industries. Estimates are presented on an annual basis for Canada in dollars x 1,000,000.

Description: This table contains 768 series, with data for years 2012 - 2016 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (16 items: Canada; Atlantic Region; Newfoundland and Labrador; Prince Edward Island; ...) Principal statistics (16 items: Total revenue; Revenue from logging activities; Total expenses; Total salaries and wages, direct and indirect labour; ...) North American Industry Classification System (NAICS) (3 items: Logging; Logging (except contract); Contract Logging).

Description: Data are presented at the national level, by fuel type (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description: Data are presented at the national level by fuel type in gigajoules (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description:

Measurements of the production of asphalt roofing materials, as well as the shipments of these products, across Canada and exports.

Description: The purpose of this research paper is to highlight the impact of the many challenges faced over time by the sawmill industry on its development and its role as an economic lever for many Canadian communities.

Description:

This infographic looks at the impact the pandemic and supply chain disruptions have had on manufacturing in Canada. Specific data that is collected by the Monthly Survey of Manufacturing is shown on the infographic to help highlight the impacts.

Description:

Demand, consumption, expected procurement, manufacturing production, manufacturing capacity and distribution of personal protective equipment (PPE) by Canadian businesses by North American Industry Classification System (NAICS) for Canada and regions.

Description:

Number of businesses needing, not needing, don’t know if they need personal protection equipment (PPE), number of employees, average percentage of full-time employees by North American Industry Classification System (NAICS) for Canada and regions. Information on number of manufacturers and distributors of PPE for Canada and regions is also available.

Description:

The federal government offers business innovation and growth support through program streams managed by its departments and agencies. In 2017, enterprises in the manufacturing sector accounted for almost one-quarter of the beneficiaries of this support and received almost one-third of the total value of support (Statistics Canada, 2020). The objective of this analysis is to assess the impact of federal growth and innovation support on the employment and revenue of beneficiary enterprises in the manufacturing sector between 2007 and 2017. This analysis suggests that enterprises that received federal support for growth and innovation experienced stronger employment and revenue growth relative to non-beneficiary enterprises. Over the three years following receipt of support, employment growth for beneficiary enterprises averaged 1.8% per year while, on average, enterprises that did not receive support experienced employment declines. Over the same period, the average annual revenue growth of beneficiary enterprises was higher than that of non-beneficiary enterprises by 4.6 percentage points.

Description: The Physical Flow Account for Plastic Material comprises 18 variables - expressed in tonnes - that describe the production and fate of plastic in products in the Canadian economy. This table displays resin detail for this account.

Description: Canadian lumber exports by mode of transportation, in thousands of cubic metres by provinces and for Canada.

Description:

This table presents a few different variables for over 75 products from the mining industry such as aluminum, cobalt, gold, iron, lead, nickel, silver, stone, salt, lime, etc. The variables available in this table are the quantity produced, the quantity shipped, the closing inventories and the value of shipments. The data are published at the national, provincial and territorial levels.

Description:

This dashboard presents selected data that are relevant for monitoring the impacts of COVID-19 on economic activity in Canada. It includes data on a range of monthly indicators - real GDP, consumer prices, the unemployment rate, merchandise exports and imports, retail sales, hours worked and manufacturing sales -- as well as monthly data on aircraft movements, railway carloadings, and travel between Canada and other countries.

Estimates are presented from January 2019 to the current reference month for each data series. The information will be updated continuously as new data becomes available, and additional series may be added to the dashboard as circumstances warrant.

To support the analysis of time series movements in the data, the dashboard reports changes in each series on both a month-over-month and year-over-year basis. For most of the variables reported, information on cumulative changes in the data both prior and subsequent to the end of 2019 is also presented by indexing the level estimates to December 2019, as depicted in the accompanying charts.

Description:

This table contains 86609 series, with data for years 2012 - 2016 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (17 items: Canada; Atlantic Region; Newfoundland and Labrador; Prince Edward Island; ...) Principal statistics (22 items: Total revenue; Revenue from goods manufactured; Total expenses; Total salaries and wages, direct and indirect labour; ...) North American Industry Classification System (NAICS) (290 items: Manufacturing; Food manufacturing; Animal food manufacturing; Animal food manufacturing; ...).

Description:

Principal statistics for the motor vehicle and motor vehicle parts manufacturing, motor vehicle body and trailer manufacturing industries. Estimates are presented on an annual basis for Canada in dollars x 1,000,000.

Description: This table contains 768 series, with data for years 2012 - 2016 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (16 items: Canada; Atlantic Region; Newfoundland and Labrador; Prince Edward Island; ...) Principal statistics (16 items: Total revenue; Revenue from logging activities; Total expenses; Total salaries and wages, direct and indirect labour; ...) North American Industry Classification System (NAICS) (3 items: Logging; Logging (except contract); Contract Logging).

Description: Data are presented at the national level, by fuel type (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description: Data are presented at the national level by fuel type in gigajoules (butane, electricity, steam, etc) and by North American Industry Classification System (NAICS). Not all combinations are available.

Description:

Measurements of the production of asphalt roofing materials, as well as the shipments of these products, across Canada and exports.

Description:

This paper examines the challenges that the manufacturing sector has faced over the last half century focusing on both long- and short-term performance. It first examines whether there is evidence that this sector is in long-term decline. The paper also investigates how the industry has responded to specific shocks during this period from exchange-rate movements, trade liberalization and business cycles. It finds little evidence of long-term decline. Rather it describes how manufacturing has adapted to varying challenges, whether from demand shifts due to business cycles, relative price shifts associated with exchange rate shocks or changes in tariff regimes.

Description:

Using data from Statistics Canada's Survey of Environmental Protection Expenditures and Annual Survey of Manufacturers and Logging, as well as data derived from Environment Canada's National Pollution Release Inventory, this study examines environmental expenditures in the manufacturing sector.

Description: The feature article, Food in Canada, begins with a brief historical perspective on fishing and farming in Canada and moves on to explore the impact of the food system on the economy, environment and society. It illustrates how the contribution of the food system to gross domestic product and employment has shifted over the past forty years, and investigates the impact of primary food production on land, water, air and climate. The article concludes with a characterization of what is on the Canadian table, and the greenhouse gas emissions and energy-use associated with household food purchases.

Description:

This article explores differences in characteristics of innovative and non-innovative manufacturing plants in Canada using results from the Survey of Innovation (SOI) 2005. It finds that innovative plants are more likely than non-innovators to be large, to have employees with higher education credentials, to engage in research and development (R&D) and marketing activities and to have full-time R&D employees. Innovative plants are also more likely to receive external funding, to export and import, to use both formal and informal methods of intellectual property protection, and to have differences in how they rate the importance of success factors.

Description:

This paper examines the characteristics of plants in the manufacturing sector undergoing changes in ownership to further our understanding of the underlying causes of mergers and acquisitions. Previous Canadian studies (Baldwin 1995; Baldwin and Caves 1991) compare the performance of merged plants at the beginning and the end of the 1970s. This paper examines annual changes that occurred over the 1970s, 1980s, and 1990s to provide a longer-run perspective. In doing so, it outlines the amount of change taking place (both the number of plants affected and the share of employment) and the characteristics of plants that led to their takeover. Differences between foreign and domestic takeovers are also examined.

Description:

This paper uses plant-level data on productivity growth and changes in market share over different periods during the 1970s, 1980s, and 1990s to investigate whether plants with declining market shares obtain productivity spillovers from more successful producers and whether the impact of spillovers is affected by the distance between plants. We are primarily interested in the extent to which productivity externalities moderate the centrifugal forces that separate growing plants from declining rivals because of the productivity advantages enjoyed by the former.

The paper focuses on the productivity performance of plants with declining market shares as potential receivers of productivity spillovers. Two possible sources for these spillovers are examined rival plants operating at the technological frontier and rivals that are actively gaining market share. The analysis advances a model of the externality process in which the productivity of declining plants is influenced by (1) the economic distance of the declining plant from its technological frontier at the beginning of any period, (2) contemporaneous productivity gains in rival plants that are actively wresting market share away from decliners, and (3) the distance between rival plants.

We evaluate the existence and magnitude of these sources of spillovers frontier plants and market-share gainers because of what they reveal about the types of productive information that struggling plants may be able to assimilate from rivals. Spillovers from the plants at the existing frontier are likely to reflect the established best practices of industry leaders; spillovers coming from market-share gainers involve new sources of productive knowledge that emerge as the frontier is actively being re-established. Our model also incorporates geographic information on the proximity of declining plants to both frontier plants and market-share gainers to test whether productivity spillovers are spatially circumscribed. The results provide evidence that productivity improvements in more successful plants benefit their struggling rivals and that these benefits are inversely related to distance; however, the magnitude of spillovers from growing plants to decliners is relatively small. Spillovers do not offer much of a safety net for producers that are losing the productivity race. The paper also shows that declining plants that start out behind the technological frontier are likely to fall further behind, after the impact of mean reversion is taken into account.

Description:

This study reviews status and trends for the manufacturing sector in 2008. It analyses major regional and industry shifts in production and put them in the context of major socio-economic drivers such as domestic demand, prices and exports. Employment, investment, productivity and profitability indicators are also presented.

Description:

Many historical comparisons of international productivity use measures of labour productivity (output per worker). Differences in labour productivity can be caused by differences in technical efficiency or differences in capital intensity. Moving to measures of total factor productivity allows international comparisons to ascertain whether differences in labour productivity arise from differences in efficiency or differences in factors utilized in the production process.

This paper examines differences in output per worker in the manufacturing sectors of Canada and the United States in 1929 and the extent to which it arises from efficiency differences. It makes corrections for differences in capital and materials intensity per worker in order to derive a measure of total factor efficiency of Canada relative to the United States, using detailed industry data. It finds that while output per worker in Canada was only about 75% of the United States productivity level, the total factor productivity measure of Canada was about the same as the United States level - that is, there was very little difference in technical efficiency in the two countries. Canada's lower output per worker was the result of the use of less capital and materials per worker than the United States.

Description:

Innovation commercialization, the process of introducing a new or significantly improved product to market, is an important innovation activity for a plant and is the final stage in new product development. Without successful commercialization, innovations may not return any benefits for a plant's innovation efforts. The Survey of Innovation 2005 asked innovative manufacturing plants questions related to commercialization activities and provides information on the type of these activities being undertaken. Market success is measured in terms of the share of revenues in 2004 from product innovations introduced during the years 2002 to 2004.

Description:

In its recently released science and technology (S&T) strategy, Mobilizing Science and Technology to Canada's Advantage (Government of Canada 2007), the federal government stated its commitment to improving its ability to measure and report on the impact of federal S&T expenditures. In response to this challenge, the Policy Research Initiative (PRI) collaborated with departments and agencies that conduct and fund S&T to explore these issues. This article provides a summary from one of the PRI reports, The Transmission of Technology and Knowledge to Innovative Manufacturing Firms by Publicly Funded Research Organizations.

Description: This annual survey collects information on Canadian companies involved in the contract drilling and other services to the oil and gas extraction industry. The survey collects financial and operating statistics.

Description: The Monthly Survey of Manufacturing (MSM) publishes statistical series for manufacturers -- sales of goods manufactured, inventories, unfilled orders, new orders and capacity utilization rate.

Description: This survey collects the financial and commodity information used to compile statistics on Canada's manufacturing and logging industries.

Description: The monthly survey, Steel Pipe and Tubing, measures the quantities of steel pipe and tubular products that are produced and shipped by Canadian manufacturers.

Description: The monthly survey, Steel Wire and Specified Wire Products, measures quantities of steel wire and specified wire products that are produced and shipped by Canadian manufacturers.

Description: This survey collects the financial and commodity information used to compile statistics on Canada's logging industries.

Description: The bank contains data on the value of trade and industrial sales of paints, varnish, lacquers, thinners and removers. The main use was to provide market information.

Description: This survey provided data on current levels of production and shipments of the gypsum products for construction in Canada and serves as an early indication of trends in the Canadian economy.

Description: The monthly survey, Mineral Wool Including Fibrous Glass Insulation, measures quantities of mineral wool products including fibrous glass insulation (for building insulation) that are produced and shipped by Canadian manufacturers.

Description: This survey collected monthly data on production, sales and stocks from manufacturers of major appliances in Canada.