Census Subdivision Boundary File, Reference Guide, 2020
This reference guide is intended for users of the 2020 Census Subdivision Boundary File. The guide provides an overview of the file, the general methodology used in its creation, and important technical information.
What's new?
- The 2020 Census Subdivision Boundary File portrays the boundaries of all 5,139 census subdivisions, which combined, cover all of Canada.
- The boundaries, names, and codes of census subdivisions reflect those in effect on January 1, 2020, the geographic reference date for this edition of the Census Subdivision Boundary File.
- The 2020 Census Subdivision boundaries have been adjusted to the more current, accurate and consistent CanVec hydrographic features (Topographic Data of Canada – Natural Resources Canada), which comply with international geomatics standards seamlessly across Canada.
1. About this guide
This reference guide does not provide details on specific software packages that are available for use with the 2020 Census Subdivision Boundary File. Users are advised to contact the appropriate software vendor for information.
This data product is provided 'as-is', and Statistics Canada makes no warranty, express or implied, including but not limited to, warranties of merchantability or fitness for a particular purpose. In no event will Statistics Canada be liable for any direct, special, indirect, consequential or other damages, however caused.2. Overview
The 2020 Census Subdivision Boundary File depicts the boundaries of all 5,139 census subdivisions, which combined, cover all of Canada and contains information such as unique identifiers (UIDs), names and types of the geographic area presented. As well, the UIDs, names and types (where applicable) are included for the following geographic levels:
- province or territory
- census division
The 2020 Census Subdivision Boundary File depicts the full extent of census subdivisions.
The Census Subdivision Boundary File is portrayed in Lambert conformal conic projection (North American Datum of 1983 [NAD83]). The 2020 Census Subdivision Boundary File is available as a national file.How to cite this guide
Census Subdivision Boundary File, Reference Guide, 2020, Statistics Canada Catalogue no. 92-162-G.
How to cite this product
Census Subdivision Boundary File, 2020, Statistics Canada Catalogue no. 92-162-X.
3. About this product
Purpose of the product
The purpose of the 2020 Census Subdivision Boundary File is to provide a framework for mapping and spatial analysis, and to support Geographic Information System (GIS) applications used for land use and demographic studies, as well as social, economic and market research.
The 2020 Census Subdivision Boundary File is positionally consistent with the 2020 Road Network File, which provides additional reference for mapping.
Note: It is recommended that the 2020 Census Subdivision Boundary File and the 2020 Road Network File be used as a basis for the retrieval of 2020 data for user-defined areas. Users can define their custom areas based on the roads in the 2020 Road Network File. Roads within the 2020 Road Network File correspond to the 2020 geographic frame and therefore do not require additional boundary reconciliation work, which facilitates the geocoding process. For information on custom area creation and geocoding services, please contact us at 1-800-263-1136 or STATCAN.infostats-infostats.STATCAN@canada.ca.Definitions and concepts
A census subdivision is a municipality or an area treated as equivalent to a municipality for statistical purposes (for example, Indian reserves and unorganized territories). Municipal status is defined by laws in effect in each province and territory in Canada.
Geographic terms and concepts are briefly defined in the Dictionary, Census of Population, 2016.Content
The 2020 Census Subdivision Boundary File contains the unique identifiers (UIDs), names and types of the geographic areas represented, as well as the UIDs, names and types (where applicable) of higher geographic levels including census divisions and provinces or territories.
Note: The boundaries, names, and codes of census subdivisions reflect those in effect on January 1, 2020, the geographic reference date for this edition of the Census Subdivision Boundary File.
The 2020 Census Subdivision Boundary File is available in English and French, in five formats: Shapefile (.shp), Geography Markup Language (.gml), File Geodatabase (.gdb), Esri® REST service and Web Map Service (WMS).General methodology
The National Geographic Database (NGD) is a joint Statistics Canada-Elections Canada initiative to develop and maintain a spatial database that serves the needs of both organizations. The focus of the NGD is the continual improvement of quality and currency of spatial coverage using updates from provinces, territories and local sources. The source files used for the creation of the boundary file reside on Statistics Canada's Spatial Data Infrastructure (SDI), which is derived directly from data stored on the NGD.
Creation of the 2020 Census Subdivision Boundary File
The Census Subdivision Boundary File was created from the lowest level of geography maintained in the NGD. Primary data manipulation of the product file included preserving the geographic hierarchy of the attributes inherent within a geographic level. A copy of the source census subdivision boundary file in its original format was created to facilitate geo-processing (e.g., joins, modifications and verification operations).
The file was verified for spatial and attribute content, translated into French and English, and appropriately named according to the file naming convention. Final data processing consisted of the conversion of the file using FME® (Safe Software), into the following GIS file formats: Shapefile (.shp), Geography Markup Language (.gml) and File Geodatabase (.gdb).
The Esri® REST service and Web Mapping Service (WMS) were created and published using ArcGIS® Enterprise.
The Shapefile, Geography Markup Language and File Geodatabase files are compressed into WinZip® files (file extension .zip) and made available for download from the Statistics Canada website.Limitations
The input data used to create the file was originally obtained from several sources having a wide range of scales. This boundary file will not be precise if plotted at a larger scale than the scale of the source material used in its creation. Maps created from the boundary file should not be used to determine the precise location of boundaries.
The positional accuracy of the file does not support cadastral, legal, surveying, digitizing or engineering applications.Comparison to other products/versions
Differences between the 2020 Census Subdivision Boundary File and previous versions of the census subdivision boundary file include:
- The 2020 Census Subdivision File is compatible with the 2020 edition of the Road Network File as well as the 2020 edition of the Interim List of Change to Municipal Boundaries, Status and Names.
- The 2020 Census Subdivision Boundary File is similar but not necessarily consistent with the suite of boundary files made available as a part of the 2016 Census geographic product line.
Use with other products
When considering using the 2020 Census Subdivision Boundary File, users should be aware of the compatibility of this file with those that are available from other sources. They may not be consistent with Statistics Canada files.
Reference date
The geographic reference date is a date determined by Statistics Canada to finalize the geographic framework for which statistical data are collected, tabulated and reported. The geographic reference date for the 2020 Census Subdivision Boundary File is January 1, 2020.
4. Technical specifications
Record layout and data descriptions
The following table identifies and briefly describes the selected attributes comprising the content of the 2020 Census Subdivision Boundary File.
Attribute domain values
PRUID
Uniquely identifies a province or territory. Please see the Province or territory definition from the Dictionary, Census of Population, 2016 for more information.
CSDTYPE
Census subdivisions (CSD) are classified according to designations adopted by provincial, territorial or federal authorities. The following is a list of the types of CSDs.
CDTYPE
The following is a list of the types of census divisions (CD).
Software formats
The 2020 Census Subdivision Boundary File is available for download from the Statistics Canada website in the following formats:
- Shapefile
File extension: .shp - Geography Markup Language (GML) 3.1.1
File extension: .gml - File Geodatabase
File extension: .gdb
The 2020 Census Subdivision Boundary File is also available as map services from the Statistics Canada website in the following formats:
- Esri® REST service
- Web Map Service (WMS)
File extension and accented character information
The Shapefile, Geography Markup Language and File Geodatabase files are compressed into WinZip® files (file extension .zip).
The 2020 Census Subdivision Boundary File contains attributes with accented characters. They were successfully tested on desktop versions of ArcGIS® 10.5.1 and FME Data Inspector 2015.1®.
Metadata
The downloadable compressed packages (.zip) include a metadata file (.xml) that describes and validates the structure and content of the Census Subdivision Boundary File.
The same metadata are applied to the Esri® REST service and Web Map Service.
Geographic representation
The 2020 Census Subdivision Boundary File is available from the Statistics Canada website in the following geographic representation:
- Projection: Lambert conformal conic
- False easting: 6200000.000000
- False northing: 3000000.000000
- Central meridian: -91.866667
- Standard parallel 1: 49.000000
- Standard parallel 2: 77.000000
- Latitude of origin: 63.390675
- Linear unit: metre (1.000000)
- Datum: North American 1983 (NAD83)
- Prime meridian: Greenwich
- Angular unit: degree
- Spheroid: GRS 1980
The North American Datum of 1983 (NAD83) is an adjustment of the 1927 datum (NAD27) that reflects the higher accuracy of geodetic surveying.
Users of the 2020 Census Subdivision Boundary File can transform the file into the representation that best satisfies their needs, knowing of the effects these representations have on angles, areas, distances and direction. Users have the option to choose the best projection in concert with display objectives.File naming convention
Spatial product file names follow a file naming convention. The file projection, geographic level, geographic coverage, file type, geographic reference date, file format and language are embedded within the file name. Standardizing the names of the files facilitates the storage of compressed files, all of which have the extension .zip.
Each file name is 13 characters in length. All alphabetic characters are in lower case to maintain consistency.
First character: projection of file
- l - projection of file is Lambert conformal conic
Next three characters: primary geographic level of file or type of file
- csd - census subdivision
Next three numbers: geographic code of coverage
- 000 - Canada
Next character: file type
- a - digital boundary file
Next two numbers: geographic reference date
The geographic reference date is a date determined by Statistics Canada to finalize the geographic framework for which statistical data are collected, tabulated and reported. The geographic reference date for the 2020 Census Subdivision Boundary File is January 1, 2020.
- 20 - geographic reference date is 2020
Next character: file format
- a - Shapefile (.shp)
- f - File Geodatabase (.gdb)
- g - Geography Markup Language (.gml)
- r – Esri® REST service
- w – Web Map Service (WMS)
Final two characters: language
- _e - English
- _f - French
5. Data quality
Spatial data quality elements provide information on the fitness-for-use of a spatial database by describing why, when and how the data are created, and how accurate the data are. The quality elements include an overview of lineage, positional accuracy, attribute accuracy, logical consistency and completeness. This information is provided to users for all spatial data products disseminated.
Lineage
Lineage describes the history of the spatial data, including descriptions of the source material from which the data were derived, and the methods of derivation. It also contains the dates of the source material, and all transformations involved in producing the final digital files.
Positional accuracy
Positional accuracy refers to the absolute and relative accuracy of the positions of geographic features. Absolute accuracy is the closeness of the coordinate values in a dataset to values accepted as or being true. Relative accuracy is the closeness of the relative positions of features to their respective relative positions accepted as or being true. Descriptions of positional accuracy include the quality of the final file or product after all transformations.
The NGD is not fully Global Positioning Systems (GPS)-compliant. However, every possible attempt is made to ensure that the standard geographic area boundaries maintained in the NGD respect the limits of the administrative entities that they represent (e.g., census division and census subdivision) or on which they are based (e.g., census metropolitan area or census agglomeration). The positional accuracy of these limits is dependent upon source materials used by Statistics Canada to identify the location of limits. In addition, due to the importance placed on relative positional accuracy, the positional accuracy of other geographic data (e.g., road network data and hydrographic data) that are stored within the NGD is considered when positioning the limits of the standard geographic areas.Attribute accuracy
Attribute accuracy refers to the accuracy of quantitative and qualitative attributes information attached to each feature (e.g., census subdivision unique identifier, name, type).
As noted under the General methodology section, the attributes (names, types and unique identifiers) for all standard geographic areas are sourced from Statistics Canada's SDI. The names and types of standard geographic areas have been updated using source materials from provincial, territorial and federal authorities.
The attribute data associated with the polygons in the 2020 Census Subdivision Boundary File were verified against data in the SDI and found to accurately reflect them.Logical consistency
Logical consistency describes the fidelity of relationships encoded in the structure of the digital spatial data.
The 2020 Census Subdivision Boundary File was verified against data in the SDI and found to be logically consistent.Consistency with other products
The position of the boundaries in the 2020 Census Subdivision Boundary File is not necessarily consistent with previous editions of boundary files or road network files as a result of updates made using provincially and territorially sourced data.
Topology checks were performed with the 2020 Road Network File and the 2020 Census Subdivision Boundary File to measure the degree of integration amongst these products. The results indicated that the degree of integration was within the default tolerance parameters, as defined below.
- Tolerance: 0.001 metres
- Resolution: 0.0001 metres
Completeness
Completeness refers to the degree to which geographic features, their attributes and their relationships are included or omitted in a dataset. It also includes information on selection criteria, definitions used and other relevant mapping rules.
The 2020 Census Subdivision Boundary File contains the complete set of standard geographic areas for this level of the geographic hierarchy. Users should be aware that individual census subdivisions may consist of two or more geographic parts.Appendices
See definitions of the geography universe from the Dictionary, Census of Population, 2016.
See Figure 1.1 Hierarchy of standard geographic areas for dissemination, 2016 Census from the Dictionary, Census of Population, 2016.
See Interim List of Changes to Municipal Boundaries, Status, and Names, Up to January 1st, 2020.
- Date modified: