Canadian Export Classification
Chapter 72
Iron and steel
| HS Code | Statistical suffix | Description | Unit of measure |
|---|---|---|---|
| I. Primary materials; products in granular or powder form | |||
| 72.01 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. | ||
| 7201.10 | 00 | -Non-alloy pig iron containing by weight 0.5% or less of phosphorus | TNE |
| 7201.20 | 00 | -Non-alloy pig iron containing by weight more than 0.5% of phosphorus | TNE |
| 7201.50 | 00 | -Alloy pig iron; spiegeleisen | TNE |
| 72.02 | Ferro-alloys. | ||
| -Ferro-manganese: | |||
| 7202.11 | 00 | --Containing by weight more than 2% of carbon | KGM |
| 7202.19 | 00 | --Other | KGM |
| -Ferro-silicon: | |||
| 7202.21 | 00 | --Containing by weight more than 55% of silicon | KGM |
| 7202.29 | 00 | --Other | KGM |
| 7202.30 | 00 | -Ferro-silico-manganese | KGM |
| -Ferro-chromium: | |||
| 7202.41 | 00 | --Containing by weight more than 4% of carbon | KGM |
| 7202.49 | 00 | --Other | KGM |
| 7202.50 | 00 | -Ferro-silico-chromium | KGM |
| 7202.60 | 00 | -Ferro-nickel | KGM |
| 7202.70 | 00 | -Ferro-molybdenum | KGM |
| 7202.80 | 00 | -Ferro-tungsten and ferro-silico-tungsten | KGM |
| -Other: | |||
| 7202.91 | 00 | --Ferro-titanium and ferro-silico-titanium | KGM |
| 7202.92 | 00 | --Ferro-vanadium | KGM |
| 7202.93 | 00 | --Ferro-niobium | KGM |
| 7202.99 | 00 | --Other | KGM |
| 72.03 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. | ||
| 7203.10 | 00 | -Ferrous products obtained by direct reduction of iron ore | TNE |
| 7203.90 | 00 | -Other | TNE |
| 72.04 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. | ||
| 7204.10 | 00 | -Waste and scrap of cast iron | TNE |
| -Waste and scrap of alloy steel: | |||
| 7204.21 | 00 | --Of stainless steel | TNE |
| 7204.29 | 00 | --Other | TNE |
| 7204.30 | 00 | -Waste and scrap of tinned iron or steel | TNE |
| -Other waste and scrap: | |||
| 7204.41 | 00 | --Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | TNE |
| 7204.49 | 00 | --Other | TNE |
| 7204.50 | 00 | -Remelting scrap ingots | TNE |
| 72.05 | Granules and powders, of pig iron, spiegeleisen, iron or steel. | ||
| 7205.10 | 00 | -Granules | TNE |
| -Powders: | |||
| 7205.21 | 00 | --Of alloy steel | TNE |
| 7205.29 | 00 | --Other | TNE |
| II. Iron and non-alloy steel | |||
| 72.06 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). | ||
| 7206.10 | 00 | -Ingots | TNE |
| 7206.90 | 00 | -Other | TNE |
| 72.07 | Semi-finished products of iron or non-alloy steel. | ||
| -Containing by weight less than 0.25% of carbon: | |||
| 7207.11 | 00 | --Of rectangular (including square) cross-section, the width measuring less than twice the thickness | TNE |
| 7207.12 | 00 | --Other, of rectangular (other than square) cross-section | TNE |
| 7207.19 | 00 | --Other | TNE |
| 7207.20 | 00 | -Containing by weight 0.25% or more of carbon | TNE |
| 72.08 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. | ||
| 7208.10 | 00 | -In coils, not further worked than hot-rolled, with patterns in relief | KGM |
| -Other, in coils, not further worked than hot-rolled, pickled: | |||
| 7208.25 | 00 | --Of a thickness of 4.75 mm or more | KGM |
| 7208.26 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7208.27 | 00 | --Of a thickness of less than 3 mm | KGM |
| -Other, in coils, not further worked than hot-rolled: | |||
| 7208.36 | 00 | --Of a thickness exceeding 10 mm | KGM |
| 7208.37 | 00 | --Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM |
| 7208.38 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7208.39 | 00 | --Of a thickness of less than 3 mm | KGM |
| 7208.40 | 00 | -Not in coils, not further worked than hot-rolled, with patterns in relief | KGM |
| -Other, not in coils, not further worked than hot-rolled: | |||
| 7208.51 | 00 | --Of a thickness exceeding 10 mm | KGM |
| 7208.52 | 00 | --Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM |
| 7208.53 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7208.54 | 00 | --Of a thickness of less than 3 mm | KGM |
| 7208.90 | 00 | -Other | KGM |
| 72.09 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. | ||
| -In coils, not further worked than cold-rolled (cold-reduced): | |||
| 7209.15 | 00 | --Of a thickness of 3 mm or more | KGM |
| 7209.16 | 00 | --Of a thickness exceeding 1 mm but less than 3 mm | KGM |
| 7209.17 | 00 | --Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM |
| 7209.18 | 00 | --Of a thickness of less than 0.5 mm | KGM |
| -Not in coils, not further worked than cold-rolled (cold-reduced): | |||
| 7209.25 | 00 | --Of a thickness of 3 mm or more | KGM |
| 7209.26 | 00 | --Of a thickness exceeding 1 mm but less than 3 mm | KGM |
| 7209.27 | 00 | --Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM |
| 7209.28 | 00 | --Of a thickness of less than 0.5 mm | KGM |
| 7209.90 | 00 | -Other | KGM |
| 72.10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. | ||
| -Plated or coated with tin: | |||
| 7210.11 | 00 | --Of a thickness of 0.5 mm or more | KGM |
| 7210.12 | 00 | --Of a thickness of less than 0.5 mm | KGM |
| 7210.20 | 00 | -Plated or coated with lead, including terne-plate | KGM |
| 7210.30 | 00 | -Electrolytically plated or coated with zinc | KGM |
| -Otherwise plated or coated with zinc: | |||
| 7210.41 | 00 | --Corrugated | KGM |
| 7210.49 | 00 | --Other | KGM |
| 7210.50 | 00 | -Plated or coated with chromium oxides or with chromium and chromium oxides | KGM |
| -Plated or coated with aluminum: | |||
| 7210.61 | 00 | --Plated or coated with aluminum-zinc alloys | KGM |
| 7210.69 | 00 | --Other | KGM |
| 7210.70 | 00 | -Painted, varnished or coated with plastics | KGM |
| 7210.90 | 00 | -Other | KGM |
| 72.11 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. | ||
| -Not further worked than hot-rolled: | |||
| 7211.13 | 00 | --Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief | KGM |
| 7211.14 | 00 | --Other, of a thickness of 4.75 mm or more | KGM |
| 7211.19 | 00 | --Other | KGM |
| -Not further worked than cold-rolled (cold-reduced): | |||
| 7211.23 | 00 | --Containing by weight less than 0.25% of carbon | KGM |
| 7211.29 | 00 | --Other | KGM |
| 7211.90 | 00 | -Other | KGM |
| 72.12 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. | ||
| 7212.10 | 00 | -Plated or coated with tin | KGM |
| 7212.20 | 00 | -Electrolytically plated or coated with zinc | KGM |
| 7212.30 | 00 | -Otherwise plated or coated with zinc | KGM |
| 7212.40 | 00 | -Painted, varnished or coated with plastics | KGM |
| 7212.50 | 00 | -Otherwise plated or coated | KGM |
| 7212.60 | 00 | -Clad | KGM |
| 72.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. | ||
| 7213.10 | 00 | -Containing indentations, ribs, grooves or other deformations produced during the rolling process | KGM |
| 7213.20 | 00 | -Other, of free-cutting steel | KGM |
| -Other: | |||
| 7213.91 | 00 | --Of circular cross-section measuring less than 14 mm in diameter | KGM |
| 7213.99 | 00 | --Other | KGM |
| 72.14 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. | ||
| 7214.10 | 00 | -Forged | KGM |
| 7214.20 | 00 | -Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | KGM |
| 7214.30 | 00 | -Other, of free-cutting steel | KGM |
| -Other: | |||
| 7214.91 | 00 | --Of rectangular (other than square) cross-section | KGM |
| 7214.99 | 00 | --Other | KGM |
| 72.15 | Other bars and rods of iron or non-alloy steel. | ||
| 7215.10 | 00 | -Of free-cutting steel, not further worked than cold-formed or cold-finished | KGM |
| 7215.50 | 00 | -Other, not further worked than cold-formed or cold-finished | KGM |
| 7215.90 | 00 | -Other | KGM |
| 72.16 | Angles, shapes and sections of iron or non-alloy steel. | ||
| 7216.10 | 00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | KGM |
| -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: | |||
| 7216.21 | 00 | --L sections | KGM |
| 7216.22 | 00 | --T sections | KGM |
| -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: | |||
| 7216.31 | 00 | --U sections | KGM |
| 7216.32 | 00 | --I sections | KGM |
| 7216.33 | 00 | --H sections | KGM |
| 7216.40 | 00 | -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | KGM |
| 7216.50 | 00 | -Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | KGM |
| -Angles, shapes and sections, not further worked than cold-formed or cold-finished: | |||
| 7216.61 | 00 | --Obtained from flat-rolled products | KGM |
| 7216.69 | 00 | --Other | KGM |
| -Other: | |||
| 7216.91 | 00 | --Cold-formed or cold-finished from flat-rolled products | KGM |
| 7216.99 | 00 | --Other | KGM |
| 72.17 | Wire of iron or non-alloy steel. | ||
| 7217.10 | 00 | -Not plated or coated, whether or not polished | KGM |
| 7217.20 | 00 | -Plated or coated with zinc | KGM |
| 7217.30 | 00 | -Plated or coated with other base metals | KGM |
| 7217.90 | 00 | -Other | KGM |
| III. Stainless steel | |||
| 72.18 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. | ||
| 7218.10 | 00 | -Ingots and other primary forms | TNE |
| -Other: | |||
| 7218.91 | 00 | --Of rectangular (other than square) cross-section | TNE |
| 7218.99 | 00 | --Other | TNE |
| 72.19 | Flat-rolled products of stainless steel, of a width of 600 mm or more. | ||
| -Not further worked than hot-rolled, in coils: | |||
| 7219.11 | 00 | --Of a thickness exceeding 10 mm | KGM |
| 7219.12 | 00 | --Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM |
| 7219.13 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7219.14 | 00 | --Of a thickness of less than 3 mm | KGM |
| -Not further worked than hot-rolled, not in coils: | |||
| 7219.21 | 00 | --Of a thickness exceeding 10 mm | KGM |
| 7219.22 | 00 | --Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM |
| 7219.23 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7219.24 | 00 | --Of a thickness of less than 3 mm | KGM |
| -Not further worked than cold-rolled (cold-reduced): | |||
| 7219.31 | 00 | --Of a thickness of 4.75 mm or more | KGM |
| 7219.32 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7219.33 | 00 | --Of a thickness exceeding 1 mm but less than 3 mm | KGM |
| 7219.34 | 00 | --Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM |
| 7219.35 | 00 | --Of a thickness of less than 0.5 mm | KGM |
| 7219.90 | 00 | -Other | KGM |
| 72.20 | Flat-rolled products of stainless steel, of a width of less than 600 mm. | ||
| -Not further worked than hot-rolled: | |||
| 7220.11 | 00 | --Of a thickness of 4.75 mm or more | KGM |
| 7220.12 | 00 | --Of a thickness of less than 4.75 mm | KGM |
| 7220.20 | 00 | -Not further worked than cold-rolled (cold-reduced) | KGM |
| 7220.90 | 00 | -Other | KGM |
| 7221.00 | 00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | KGM |
| 72.22 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. | ||
| -Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: | |||
| 7222.11 | 00 | --Of circular cross-section | KGM |
| 7222.19 | 00 | --Other | KGM |
| 7222.20 | 00 | -Bars and rods, not further worked than cold-formed or cold-finished | KGM |
| 7222.30 | 00 | -Other bars and rods | KGM |
| 7222.40 | 00 | -Angles, shapes and sections | KGM |
| 7223.00 | 00 | Wire of stainless steel | KGM |
| IV. Other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | |||
| 72.24 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. | ||
| 7224.10 | 00 | -Ingots and other primary forms | TNE |
| 7224.90 | 00 | -Other | TNE |
| 72.25 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. | ||
| -Of silicon-electrical steel: | |||
| 7225.11 | 00 | --Grain-oriented | KGM |
| 7225.19 | 00 | --Other | KGM |
| 7225.30 | 00 | -Other, not further worked than hot-rolled, in coils | KGM |
| 7225.40 | 00 | -Other, not further worked than hot-rolled, not in coils | KGM |
| 7225.50 | 00 | -Other, not further worked than cold-rolled (cold-reduced) | KGM |
| -Other: | |||
| 7225.91 | 00 | --Electrolytically plated or coated with zinc | KGM |
| 7225.92 | 00 | --Otherwise plated or coated with zinc | KGM |
| 7225.99 | 00 | --Other | KGM |
| 72.26 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. | ||
| -Of silicon-electrical steel: | |||
| 7226.11 | 00 | --Grain-oriented | KGM |
| 7226.19 | 00 | --Other | KGM |
| 7226.20 | 00 | -Of high speed steel | KGM |
| -Other: | |||
| 7226.91 | 00 | --Not further worked than hot-rolled | KGM |
| 7226.92 | 00 | --Not further worked than cold-rolled (cold-reduced) | KGM |
| 7226.99 | 00 | --Other | KGM |
| 72.27 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. | ||
| 7227.10 | 00 | -Of high speed steel | KGM |
| 7227.20 | 00 | -Of silico-manganese steel | KGM |
| 7227.90 | 00 | -Other | KGM |
| 72.28 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. | ||
| 7228.10 | 00 | -Bars and rods, of high speed steel | KGM |
| 7228.20 | 00 | -Bars and rods, of silico-manganese steel | KGM |
| 7228.30 | 00 | -Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded | KGM |
| 7228.40 | 00 | -Other bars and rods, not further worked than forged | KGM |
| 7228.50 | 00 | -Other bars and rods, not further worked than cold-formed or cold-finished | KGM |
| 7228.60 | 00 | -Other bars and rods | KGM |
| 7228.70 | 00 | -Angles, shapes and sections | KGM |
| 7228.80 | 00 | -Hollow drill bars and rods | KGM |
| 72.29 | Wire of other alloy steel. | ||
| 7229.20 | 00 | -Of silico-manganese steel | KGM |
| 7229.90 | 00 | -Other | KGM |
- Date modified: