Statistics Canada
www.statcan.gc.ca
Common menu bar links
Table
Chapter 72 Iron
and steel
Archived Content
Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please "contact us" to request a format other than those available.
| Commodity code Harmonized System | Commodity code Statistical suffix | Description | Unit of measure |
|---|---|---|---|
| I. Primary materials; products in granular or powder form | |||
| 72.01 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. | ||
| 7201.10 | 00 | -Non-alloy pig iron containing by weight 0.5% or less of phosphorus | TNE |
| 7201.20 | 00 | -Non-alloy pig iron containing by weight more than 0.5% of phosphorus | TNE |
| 7201.50 | 00 | -Alloy pig iron; spiegeleisen | TNE |
| 72.02 | Ferro-alloys. | ||
| -Ferro-manganese: | |||
| 7202.11 | 00 | --Containing by weight more than 2% of carbon | KGM |
| 7202.19 | 00 | --Other | KGM |
| -Ferro-silicon: | |||
| 7202.21 | 00 | --Containing by weight more than 55% of silicon | KGM |
| 7202.29 | 00 | --Other | KGM |
| 7202.30 | 00 | -Ferro-silico-manganese | KGM |
| -Ferro-chromium: | |||
| 7202.41 | 00 | --Containing by weight more than 4% of carbon | KGM |
| 7202.49 | 00 | --Other | KGM |
| 7202.50 | 00 | -Ferro-silico-chromium | KGM |
| 7202.60 | 00 | -Ferro-nickel | KGM |
| 7202.70 | 00 | -Ferro-molybdenum | KGM |
| 7202.80 | 00 | -Ferro-tungsten and ferro-silico-tungsten | KGM |
| -Other: | |||
| 7202.91 | 00 | --Ferro-titanium and ferro-silico-titanium | KGM |
| 7202.92 | 00 | --Ferro-vanadium | KGM |
| 7202.93 | 00 | --Ferro-niobium | KGM |
| 7202.99 | 00 | --Other | KGM |
| 72.03 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. | ||
| 7203.10 | 00 | -Ferrous products obtained by direct reduction of iron ore | TNE |
| 7203.90 | 00 | -Other | TNE |
| 72.04 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. | ||
| 7204.10 | 00 | -Waste and scrap of cast iron | TNE |
| -Waste and scrap of alloy steel: | |||
| 7204.21 | 00 | --Of stainless steel | TNE |
| 7204.29 | 00 | --Other | TNE |
| 7204.30 | 00 | -Waste and scrap of tinned iron or steel | TNE |
| -Other waste and scrap: | |||
| 7204.41 | 00 | --Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | TNE |
| 7204.49 | 00 | --Other | TNE |
| 7204.50 | 00 | -Remelting scrap ingots | TNE |
| 72.05 | Granules and powders, of pig iron, spiegeleisen, iron or steel. | ||
| 7205.10 | 00 | -Granules | TNE |
| -Powders: | |||
| 7205.21 | 00 | --Of alloy steel | TNE |
| 7205.29 | 00 | --Other | TNE |
| II. Iron and non-alloy steel | |||
| 72.06 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). | ||
| 7206.10 | 00 | -Ingots | TNE |
| 7206.90 | 00 | -Other | TNE |
| 72.07 | Semi-finished products of iron or non-alloy steel. | ||
| -Containing by weight less than 0.25% of carbon: | |||
| 7207.11 | 00 | --Of rectangular (including square) cross-section, the width measuring less than twice the thickness | TNE |
| 7207.12 | 00 | --Other, of rectangular (other than square) cross-section | TNE |
| 7207.19 | 00 | --Other | TNE |
| 7207.20 | 00 | -Containing by weight 0.25% or more of carbon | TNE |
| 72.08 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. | ||
| 7208.10 | 00 | -In coils, not further worked than hot-rolled, with patterns in relief | KGM |
| -Other, in coils, not further worked than hot-rolled, pickled: | |||
| 7208.25 | 00 | --Of a thickness of 4.75 mm or more | KGM |
| 7208.26 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7208.27 | 00 | --Of a thickness of less than 3 mm | KGM |
| -Other, in coils, not further worked than hot-rolled: | |||
| 7208.36 | 00 | --Of a thickness exceeding 10 mm | KGM |
| 7208.37 | 00 | --Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM |
| 7208.38 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7208.39 | 00 | --Of a thickness of less than 3 mm | KGM |
| 7208.40 | 00 | -Not in coils, not further worked than hot-rolled, with patterns in relief | KGM |
| -Other, not in coils, not further worked than hot-rolled: | |||
| 7208.51 | 00 | --Of a thickness exceeding 10 mm | KGM |
| 7208.52 | 00 | --Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM |
| 7208.53 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7208.54 | 00 | --Of a thickness of less than 3 mm | KGM |
| 7208.90 | 00 | -Other | KGM |
| 72.09 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. | ||
| -In coils, not further worked than cold-rolled (cold-reduced): | |||
| 7209.15 | 00 | --Of a thickness of 3 mm or more | KGM |
| 7209.16 | 00 | --Of a thickness exceeding 1 mm but less than 3 mm | KGM |
| 7209.17 | 00 | --Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM |
| 7209.18 | 00 | --Of a thickness of less than 0.5 mm | KGM |
| -Not in coils, not further worked than cold-rolled (cold-reduced): | |||
| 7209.25 | 00 | --Of a thickness of 3 mm or more | KGM |
| 7209.26 | 00 | --Of a thickness exceeding 1 mm but less than 3 mm | KGM |
| 7209.27 | 00 | --Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM |
| 7209.28 | 00 | --Of a thickness of less than 0.5 mm | KGM |
| 7209.90 | 00 | -Other | KGM |
| 72.10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. | ||
| -Plated or coated with tin: | |||
| 7210.11 | 00 | --Of a thickness of 0.5 mm or more | KGM |
| 7210.12 | 00 | --Of a thickness of less than 0.5 mm | KGM |
| 7210.20 | 00 | -Plated or coated with lead, including terne-plate | KGM |
| 7210.30 | 00 | -Electrolytically plated or coated with zinc | KGM |
| -Otherwise plated or coated with zinc: | |||
| 7210.41 | 00 | --Corrugated | KGM |
| 7210.49 | 00 | --Other | KGM |
| 7210.50 | 00 | -Plated or coated with chromium oxides or with chromium and chromium oxides | KGM |
| -Plated or coated with aluminum: | |||
| 7210.61 | 00 | --Plated or coated with aluminum-zinc alloys | KGM |
| 7210.69 | 00 | --Other | KGM |
| 7210.70 | 00 | -Painted, varnished or coated with plastics | KGM |
| 7210.90 | 00 | -Other | KGM |
| 72.11 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. | ||
| -Not further worked than hot-rolled: | |||
| 7211.13 | 00 | --Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief | KGM |
| 7211.14 | 00 | --Other, of a thickness of 4.75 mm or more | KGM |
| 7211.19 | 00 | --Other | KGM |
| -Not further worked than cold-rolled (cold-reduced): | |||
| 7211.23 | 00 | --Containing by weight less than 0.25% of carbon | KGM |
| 7211.29 | 00 | --Other | KGM |
| 7211.90 | 00 | -Other | KGM |
| 72.12 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. | ||
| 7212.10 | 00 | -Plated or coated with tin | KGM |
| 7212.20 | 00 | -Electrolytically plated or coated with zinc | KGM |
| 7212.30 | 00 | -Otherwise plated or coated with zinc | KGM |
| 7212.40 | 00 | -Painted, varnished or coated with plastics | KGM |
| 7212.50 | 00 | -Otherwise plated or coated | KGM |
| 7212.60 | 00 | -Clad | KGM |
| 72.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. | ||
| 7213.10 | 00 | -Containing indentations, ribs, grooves or other deformations produced during the rolling process | KGM |
| 7213.20 | 00 | -Other, of free-cutting steel | KGM |
| -Other: | |||
| 7213.91 | 00 | --Of circular cross-section measuring less than 14 mm in diameter | KGM |
| 7213.99 | 00 | --Other | KGM |
| 72.14 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. | ||
| 7214.10 | 00 | -Forged | KGM |
| 7214.20 | 00 | -Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | KGM |
| 7214.30 | 00 | -Other, of free-cutting steel | KGM |
| -Other: | |||
| 7214.91 | 00 | --Of rectangular (other than square) cross-section | KGM |
| 7214.99 | 00 | --Other | KGM |
| 72.15 | Other bars and rods of iron or non-alloy steel. | ||
| 7215.10 | 00 | -Of free-cutting steel, not further worked than cold-formed or cold-finished | KGM |
| 7215.50 | 00 | -Other, not further worked than cold-formed or cold-finished | KGM |
| 7215.90 | 00 | -Other | KGM |
| 72.16 | Angles, shapes and sections of iron or non-alloy steel. | ||
| 7216.10 | 00 | -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | KGM |
| -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: | |||
| 7216.21 | 00 | --L sections | KGM |
| 7216.22 | 00 | --T sections | KGM |
| -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: | |||
| 7216.31 | 00 | --U sections | KGM |
| 7216.32 | 00 | --I sections | KGM |
| 7216.33 | 00 | --H sections | KGM |
| 7216.40 | 00 | -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | KGM |
| 7216.50 | 00 | -Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | KGM |
| -Angles, shapes and sections, not further worked than cold-formed or cold-finished: | |||
| 7216.61 | 00 | --Obtained from flat-rolled products | KGM |
| 7216.69 | 00 | --Other | KGM |
| -Other: | |||
| 7216.91 | 00 | --Cold-formed or cold-finished from flat-rolled products | KGM |
| 7216.99 | 00 | --Other | KGM |
| 72.17 | Wire of iron or non-alloy steel. | ||
| 7217.10 | 00 | -Not plated or coated, whether or not polished | KGM |
| 7217.20 | 00 | -Plated or coated with zinc | KGM |
| 7217.30 | 00 | -Plated or coated with other base metals | KGM |
| 7217.90 | 00 | -Other | KGM |
| III. Stainless steel | |||
| 72.18 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. | ||
| 7218.10 | 00 | -Ingots and other primary forms | TNE |
| -Other: | |||
| 7218.91 | 00 | --Of rectangular (other than square) cross-section | TNE |
| 7218.99 | 00 | --Other | TNE |
| 72.19 | Flat-rolled products of stainless steel, of a width of 600 mm or more. | ||
| -Not further worked than hot-rolled, in coils: | |||
| 7219.11 | 00 | --Of a thickness exceeding 10 mm | KGM |
| 7219.12 | 00 | --Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM |
| 7219.13 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7219.14 | 00 | --Of a thickness of less than 3 mm | KGM |
| -Not further worked than hot-rolled, not in coils: | |||
| 7219.21 | 00 | --Of a thickness exceeding 10 mm | KGM |
| 7219.22 | 00 | --Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM |
| 7219.23 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7219.24 | 00 | --Of a thickness of less than 3 mm | KGM |
| -Not further worked than cold-rolled (cold-reduced): | |||
| 7219.31 | 00 | --Of a thickness of 4.75 mm or more | KGM |
| 7219.32 | 00 | --Of a thickness of 3 mm or more but less than 4.75 mm | KGM |
| 7219.33 | 00 | --Of a thickness exceeding 1 mm but less than 3 mm | KGM |
| 7219.34 | 00 | --Of a thickness of 0.5 mm or more but not exceeding 1 mm | KGM |
| 7219.35 | 00 | --Of a thickness of less than 0.5 mm | KGM |
| 7219.90 | 00 | -Other | KGM |
| 72.20 | Flat-rolled products of stainless steel, of a width of less than 600 mm. | ||
| -Not further worked than hot-rolled: | |||
| 7220.11 | 00 | --Of a thickness of 4.75 mm or more | KGM |
| 7220.12 | 00 | --Of a thickness of less than 4.75 mm | KGM |
| 7220.20 | 00 | -Not further worked than cold-rolled (cold-reduced) | KGM |
| 7220.90 | 00 | -Other | KGM |
| 7221.00 | 00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | KGM |
| 72.22 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. | ||
| -Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: | |||
| 7222.11 | 00 | --Of circular cross-section | KGM |
| 7222.19 | 00 | --Other | KGM |
| 7222.20 | 00 | -Bars and rods, not further worked than cold-formed or cold-finished | KGM |
| 7222.30 | 00 | -Other bars and rods | KGM |
| 7222.40 | 00 | -Angles, shapes and sections | KGM |
| 7223.00 | 00 | Wire of stainless steel | KGM |
| IV. Other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | |||
| 72.24 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. | ||
| 7224.10 | 00 | -Ingots and other primary forms | TNE |
| 7224.90 | 00 | -Other | TNE |
| 72.25 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. | ||
| -Of silicon-electrical steel: | |||
| 7225.11 | 00 | --Grain-oriented | KGM |
| 7225.19 | 00 | --Other | KGM |
| 7225.30 | 00 | -Other, not further worked than hot-rolled, in coils | KGM |
| 7225.40 | 00 | -Other, not further worked than hot-rolled, not in coils | KGM |
| 7225.50 | 00 | -Other, not further worked than cold-rolled (cold-reduced) | KGM |
| -Other: | |||
| 7225.91 | 00 | --Electrolytically plated or coated with zinc | KGM |
| 7225.92 | 00 | --Otherwise plated or coated with zinc | KGM |
| 7225.99 | 00 | --Other | KGM |
| 72.26 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. | ||
| -Of silicon-electrical steel: | |||
| 7226.11 | 00 | --Grain-oriented | KGM |
| 7226.19 | 00 | --Other | KGM |
| 7226.20 | 00 | -Of high speed steel | KGM |
| -Other: | |||
| 7226.91 | 00 | --Not further worked than hot-rolled | KGM |
| 7226.92 | 00 | --Not further worked than cold-rolled (cold-reduced) | KGM |
| 7226.99 | 00 | --Other | KGM |
| 72.27 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. | ||
| 7227.10 | 00 | -Of high speed steel | KGM |
| 7227.20 | 00 | -Of silico-manganese steel | KGM |
| 7227.90 | 00 | -Other | KGM |
| 72.28 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. | ||
| 7228.10 | 00 | -Bars and rods, of high speed steel | KGM |
| 7228.20 | 00 | -Bars and rods, of silico-manganese steel | KGM |
| 7228.30 | 00 | -Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded | KGM |
| 7228.40 | 00 | -Other bars and rods, not further worked than forged | KGM |
| 7228.50 | 00 | -Other bars and rods, not further worked than cold-formed or cold-finished | KGM |
| 7228.60 | 00 | -Other bars and rods | KGM |
| 7228.70 | 00 | -Angles, shapes and sections | KGM |
| 7228.80 | 00 | -Hollow drill bars and rods | KGM |
| 72.29 | Wire of other alloy steel. | ||
| 7229.20 | 00 | -Of silico-manganese steel | KGM |
| 7229.90 | 00 | -Other | KGM |
