Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please "contact us" to request a format other than those available.
Notes
1. (A) Goods (other than radioactive ores) answering to a description in heading 28.44 or 28.45 are to be classified in those headings and in no other heading of the Nomenclature.
(B) Subject to paragraph (A) above, goods answering to a description in heading 28.43, 28.46 or 28.52 are to be classified in those headings and in no other heading of this Section.
2. Subject to Note 1 above, goods classifiable in heading 30.04, 30.05, 30.06, 32.12, 33.03, 33.04, 33.05, 33.06, 33.07, 35.06, 37.07 or 38.08 by reason of being put up in measured doses or for retail sale are to be classified in those headings and in no other heading of the Nomenclature.
3. Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this Section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are:
(a) having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked;
(b) presented together; and
(c) identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another.
Notes
1. Except where the context otherwise requires, the headings of this Chapter apply only to:
(a) Separate chemical elements and separate chemically defined compounds, whether or not containing impurities;
(b) The products mentioned in (a) above dissolved in water;
(c) The products mentioned in (a) above dissolved in other solvents provided that the solution constitutes a normal and necessary method of putting up these products adopted solely for reasons of safety or for transport and that the solvent does not render the product particularly suitable for specific use rather than for general use;
(d) The products mentioned in (a), (b) or (c) above with an added stabilizer (including an anti-caking agent) necessary for their preservation or transport;
(e) The products mentioned in (a), (b), (c) or (d) above with an added anti-dusting agent or a colouring substance added to facilitate their identification or for safety reasons, provided that the additions do not render the product particularly suitable for a specific use rather than for general use.
2. In addition to dithionites and sulphoxylates, stabilized with organic substances (heading 28.31), carbonates and peroxocarbonates of inorganic bases (heading 28.36), cyanides, cyanide oxides and complex cyanides of inorganic bases (heading 28.37), fulminates, cyanates and thiocyanates, of inorganic bases (heading 28.42), organic products included in heading 28.43 to 28.46 and 28.52 and carbides (heading 28.49), only the following compounds of carbon are to be classified in this Chapter:
(a) Oxides of carbon, hydrogen cyanide and fulminic, isocyanic, thiocyanic and other simple or complex cyanogen acids (heading 28.11);
(b) Halide oxides of carbon (heading 28.12);
(c) Carbon disulphide (heading 28.13);
(d) Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (heading 28.42);
(e) Hydrogen peroxide, solidified with urea (heading 28.47), carbon oxysulphide, thiocarbonyl halides, cyanogen, cyanogen halides and cyanamide and its metal derivatives (heading 28.53) other than calcium cyanamide, whether or not pure (Chapter 31).
3. Subject to the provisions of Note 1 to Section VI, this Chapter does not cover:
(a) Sodium chloride or magnesium oxide, whether or not pure, or other products of Section V;
(b) Organo-inorganic compounds other than those mentioned in Note 2 above;
(c) Products mentioned in Notes 2, 3, 4 or 5 to Chapter 31;
(d) Inorganic products of a kind used as luminophores, of heading 32.06; glass frit and other glass in the form of powder, granules or flakes, of heading 32.07;
(e) Artificial graphite (heading 38.01); products put up as charges for fire-extinguishers or put up in fire-extinguishing grenades, of heading 38.13; ink removers put up in packings for retail sale, of heading 38.24; cultured crystals (other than optical elements) weighing not less than 2.5 grams each, of the halides of the alkali or alkaline-earth metals, of heading 38.24;
(f) Precious or semi-precious stones (natural, synthetic or reconstructed) or dust or powder of such stones (headings 71.02 to 71.05), or precious metals or precious metal alloys of Chapter 71;
(g) The metals, whether or not pure, metal alloys or cermets, including sintered metal carbides (metal carbides sintered with a metal), of Section XV; or
(h) Optical elements, for example, of the halides of the alkali or alkaline-earth metals (heading 90.01).
4. Chemically defined complex acids consisting of a non-metal acid of sub-Chapter II and a metal acid of sub-Chapter IV are to be classified in heading 28.11.
5. Headings 28.26 to 28.42 apply only to metal or ammonium salts or peroxysalts.
Except where the context otherwise requires, double or complex salts are to be classified in heading 28.42.
6. Heading 28.44 applies only to:
(a) Technetium (atomic No. 43), promethium (atomic No. 61), polonium (atomic No. 84) and all elements with an atomic number greater than 84;
(b) Natural or artificial radioactive isotopes (including those of the precious metals or of the base metals of Sections XIV and XV), whether or not mixed together;
(c) Compounds, inorganic or organic, of these elements or isotopes, whether or not chemically defined, whether or not mixed together;
(d) Alloys, dispersions (including cermets), ceramic products and mixtures containing these elements or isotopes or inorganic or organic compounds thereof and having a specific radioactivity exceeding 74 Bq/g (0.002 microcurie per gram);
(e) Spent (irradiated) fuel elements (cartridges) of nuclear reactors;
(f) Radioactive residues whether or not usable.
The term “isotopes”, for the purposes of this Note and of the wording of headings 28.44 and 28.45 refers to:
7. Heading 28.48 includes copper phosphide (phosphor copper) containing more than 15% by weight of phosphorus.
8. Chemical elements (for example, silicon and selenium) doped for use in electronics are to be classified in this Chapter, provided that they are in forms unworked as drawn, or in the form of cylinders or rods. When cut in the form of discs, wafers or similar forms, they fall in heading 38.18.
Notes
1. Except where the context otherwise requires, the headings of this Chapter apply only to:
(a) Separate chemically defined organic compounds, whether or not containing impurities;
(b) Mixtures of two or more isomers of the same organic compound (whether or not containing impurities), except mixtures of acyclic hydrocarbon isomers (other than stereoisomers), whether or not saturated (Chapter 27);
(c) The products of headings 29.36 to 29.39 or the sugar ethers, sugar acetals and sugar esters, and their salts, of heading 29.40, or the products of heading 29.41, whether or not chemically defined;
(d) The products mentioned in (a), (b) or (c) above dissolved in water;
(e) The products mentioned in (a), (b) or (c) above dissolved in other solvents provided that the solution constitutes a normal and necessary method of putting up these products adopted solely for reasons of safety or for transport and that the solvent does not render the product particularly suitable for specific use rather than for general use;
(f) The products mentioned in (a), (b), (c), (d) or (e) above with an added stabilizer (including an anti-caking agent) necessary for their preservation or transport;
(g) The products mentioned in (a), (b), (c), (d), (e) or (f) above with an added anti-dusting agent or a colouring or odoriferous substance added to facilitate their identification or for safety reasons, provided that the additions do not render the product particularly suitable for specific use rather than for general use;
(h) The following products, diluted to standard strengths, for the production of azo dyes: diazonium salts, couplers used for these salts and diazotisable amines and their salts.
2. This Chapter does not cover:
(a) Goods of heading 15.04 or crude glycerol of heading 15.20;
(b) Ethyl alcohol (heading 22.07 or 22.08);
(c) Methane and propane (heading 27.11);
(d) The compounds of carbon mentioned in Note 2 to Chapter 28;
(e) Urea (heading 31.02 or 31.05);
(f) Colouring matter of vegetable or animal origin (heading 32.03), synthetic organic colouring matter, synthetic organic products of a kind used as fluorescent brightening agents or as luminophores (heading 32.04) or dyes or other colouring matter put up in forms or packings for retail sale (heading 32.12);
(g) Enzymes (heading 35.07);
(h) Metaldehyde, hexamethylenetetramine and similar substances, put up in forms (for example, tablets, sticks or similar forms) for use as fuels, or liquid or liquefied-gas fuels in containers of a kind used for filling or refilling cigarette or similar lighters and of a capacity not exceeding 300 cm3 (heading 36.06);
(ij) Products put up as charges for fire-extinguishers or put up in fire-extinguishing grenades, of heading 38.13; ink removers put up in packings for retail sale, of heading 38.24; or
(k) Optical elements, for example, of ethylenediamine tartrate (heading 90.01).
3. Goods which could be included in two or more of the headings of this Chapter are to be classified in that one of those headings which occurs last in numerical order.
4. In headings 29.04 to 29.06, 29.08 to 29.11 and 29.13 to 29.20, any reference to halogenated, sulphonated, nitrated or nitrosated derivatives includes a reference to compound derivatives, such as sulphohalogenated, nitrohalogenated, nitrosulphonated or nitrosulphohalogenated derivatives.
Nitro or nitroso groups are not be be taken as “nitrogen-functions” for the purposes of heading 29.29.
For the purposes of headings 29.11, 29.12, 29.14, 29.18 and 29.22, “oxygen-function” is to be restricted to the functions (the characteristic organic oxygen-containing groups) referred to in headings 29.05 to 29.20.
5. (A) The esters of acid-function organic compounds of sub-Chapters I to VII with organic compounds of these sub-Chapters are to be classified with that compound which is classified in the heading which occurs last in numerical order in these sub-Chapters.
(B) Esters of ethyl alcohol with acid-function organic compounds of sub-Chapters I to VII are to be classified in the same heading as the corresponding acid-function compounds.
(C) Subject to Note 1 to Section VI and Note 2 to Chapter 28:
(1) Inorganic salts of organic compounds such as acid-, phenol- or enol-function compounds or organic bases, of sub-Chapters I to X or heading 29.42, are to be classified in the heading appropriate to the organic compound;
(2) Salts formed between organic compounds of sub-Chapters I to X or heading 29.42 are to be classified in the heading appropriate to the base or to the acid (including phenol- or enol-function compounds) from which they are formed, whichever occurs last in numerical order in the Chapter; and
(D) Metal alcoholates are to be classified in the same heading as the corresponding alcohols except in the case of ethanol (heading 29.05).
(E) Halides of carboxylic acids are to be classified in the same heading as the corresponding acids.
6. The compounds of headings 29.30 and 29.31 are organic compounds the molecules of which contain, in addition to atoms of hydrogen, oxygen or nitrogen, atoms of other non-metals or of metals (such as sulphur, arsenic or lead) directly linked to carbon atoms.
7. Headings 29.32, 29.33 and 29.34 do not include epoxides with a three-membered ring, ketone peroxides, cyclic polymers of aldehydes or of thioaldehydes, anhydrides of polybasic carboxylic acids, cyclic esters of polyhydric alcohols or phenols with polybasic acids, or imides of polybasic acids.
8. For the purposes of heading 29.37:
(a) the term “hormones” includes hormone-releasing or hormone-stimulating factors, hormone inhibitors and hormone antagonists (anti-hormones);
(b) the expression “used primarily as hormones” applies not only to hormone derivatives and structural analogues used primarily for their hormonal effect, but also to those derivatives and structural analogues used primarily as intermediates in the synthesis of products of this heading.
Subheading notes
1. Within any one heading of this Chapter, derivatives of a chemical compound (or group of chemical compounds) are to be classified in the same subheading as that compound (or group of compounds) provided that they are not more specifically covered by any other subheading and that there is no residual subheading named “Other” in the series of subheadings concerned.
2. Note 3 to Chapter 29 does not apply to the subheadings of this Chapter.
Table
Chapter 29 Organic chemicals
Notes
1. This Chapter does not cover:
(a) Foods or beverages (such as dietetic, diabetic or fortified foods, food supplements, tonic beverages and mineral waters), other than nutritional preparations for intravenous administration (Section IV);
(b) Plasters specially calcined or finely ground for use in dentistry (heading 25.20);
(c) Aqueous distillates or aqueous solutions of essential oils, suitable for medicinal uses (heading 33.01);
(d) Preparations of headings 33.03 to 33.07, even if they have therapeutic or prophylactic properties;
(e) Soap or other products of heading 34.01 containing added medicaments;
(f) Preparations with a basis of plaster for use in dentistry (heading 34.07); or
(g) Blood albumin not prepared for therapeutic or prophylactic uses (heading 35.02).
2. For the purposes of heading 30.02, the expression “modified immunological products” applies only to monoclonal antibodies (MABs), antibody fragments, antibody conjugates and antibody fragment conjugates.
3. For the purposes of headings 30.03 and 30.04 and of Note 4 (d) to this Chapter, the following are to be treated:
(a) As unmixed products:
(1) Unmixed products dissolved in water;
(2) All goods of Chapter 28 or 29; and
(3) Simple vegetable extracts of heading 13.02, merely standardized or dissolved in any solvent;
(b) As products which have been mixed:
(1) Colloidal solutions and suspensions (other than colloidal sulphur);
(2) Vegetable extracts obtained by the treatment of mixtures of vegetable materials; and
(3) Salts and concentrates obtained by evaporating natural mineral waters.
4. Heading 30.06 applies only to the following, which are to be classified in that heading and in no other heading of the Nomenclature:
(a) Sterile surgical catgut, similar sterile suture materials (including sterile absorbable surgical or dental yarns) and sterile tissue adhesives for surgical wound closure;
(b) Sterile laminaria and sterile laminaria tents;
(c) Sterile absorbable surgical or dental haemostatics; sterile surgical or dental adhesion barriers, whether or not absorbable;
(d) Opacifying preparations for X-ray examinations and diagnostic reagents designed to be administered to the patient, being unmixed products put up in measured doses or products consisting of two or more ingredients which have been mixed together for such uses;
(e) Blood-grouping reagents;
(f) Dental cements and other dental fillings; bone reconstruction cements;
(g) First-aid boxes and kits;
(h) Chemical contraceptive preparations based on hormones, on other products of heading 29.37 or on spermicides;
(ij) Gel preparations designed to be used in human or veterinary medicine as a lubricant for parts of the body for surgical operations or physical examinations or as a coupling agent between the body and medical instruments;
(k) Waste pharmaceuticals, that is, pharmaceutical products which are unfit for their original intended purpose due to, for example, expiry of shelf life; and
(l) Appliances identifiable for ostomy use, that is, colostomy, ileostomy and urostomy pouches cut to shape and their adhesive wafers or faceplates.
Table
Chapter 30 Pharmaceutical products
Notes
1. This Chapter does not cover:
(a) Animal blood of heading 05.11;
(b) Separate chemically defined compounds (other than those answering to the descriptions in Note 2 (a), 3 (a), 4 (a) or 5 below); or
(c) Cultured potassium chloride crystals (other than optical elements) weighing not less than 2.5 g each, of heading 38.24; optical elements of potassium chloride (heading 90.01).
2. Heading 31.02 applies only to the following goods, provided that they are not put up in the forms or packages described in heading 31.05:
(a) Goods which answer to one or other of the descriptions given below:
(i) Sodium nitrate, whether or not pure;
(ii) Ammonium nitrate, whether or not pure;
(iii) Double salts, whether or not pure, of ammonium sulphate and ammonium nitrate;
(iv) Ammonium sulphate, whether or not pure;
(v) Double salts (whether or not pure) or mixtures of calcium nitrate and ammonium nitrate;
(vi) Double salts (whether or not pure) or mixtures of calcium nitrate and magnesium nitrate;
(vii) Calcium cyanamide, whether or not pure or treated with oil;
(viii) Urea, whether or not pure.
(b) Fertilizers consisting of any of the goods described in (a) above mixed together.
(c) Fertilizers consisting of ammonium chloride or of any of the goods described in (a) or (b) above mixed with chalk, gypsum or other inorganic non-fertilizing substances.
(d) Liquid fertilizers consisting of the goods of subparagraph (a) (ii) or (viii) above, or of mixtures of those goods, in an aqueous or ammoniacal solution.
3. Heading 31.03 applies only to the following goods, provided that they are not put up in the forms or packages described in heading 31.05:
(a) Goods which answer to one or other of the descriptions given below:
(i) Basic slag;
(ii) Natural phosphates of heading 25.10, calcined or further heat-treated than for the removal of impurities;
(iii) Superphosphates (single, double or triple);
(iv) Calcium hydrogenorthophosphate containing not less than 0.2% by weight of fluorine calculated on the dry anhydrous product.
(b) Fertilizers consisting of any of the goods described in (a) above mixed together, but with no account being taken of the fluorine content limit.
(c) Fertilizers consisting of any of the goods described in (a) or (b) above, but with no account being taken of the fluorine content limit, mixed with chalk, gypsum or other inorganic non-fertilizing substances.
4. Heading 31.04 applies only to the following goods, provided that they are not put up in the forms or packages described in heading 31.05:
(a) Goods which answer to one or other of the descriptions given below:
(i) Crude natural potassium salts (for example, carnallite, kainite and sylvite);
(ii) Potassium chloride, whether or not pure, except as provided in Note 1 (c) above;
(iii) Potassium sulphate, whether or not pure;
(iv) Magnesium potassium sulphate, whether or not pure.
(b) Fertilizers consisting of any of the goods described in (a) above mixed together.
5. Ammonium dihydrogenorthophosphate (monoammonium phosphate) and diammonium hydrogenorthophosphate (diammonium phosphate), whether or not pure, and intermixtures thereof, are to be classified in heading 31.05.
6. For the purposes of heading 31.05, the term “other fertilizers” applies only to products of a kind used as fertilizers and containing, as an essential constituent, at least one of the fertilizing elements nitrogen, phosphorus or potassium.
Notes
1. This Chapter does not cover:
(a) Separate chemically defined elements or compounds (except those of heading 32.03 or 32.04, inorganic products of a kind used as luminophores (heading 32.06), glass obtained from fused quartz or other fused silica in the forms provided for in heading 32.07, and also dyes and other colouring matter put up in forms or packings for retail sale, of heading 32.12);
(b) Tannates or other tannin derivatives of products of headings 29.36 to 29.39, 29.41 or 35.01 to 35.04; or
(c) Mastics of asphalt or other bituminous mastics (heading 27.15).
2. Heading 32.04 includes mixtures of stabilized diazonium salts and couplers for the production of azo dyes.
3. Headings 32.03, 32.04, 32.05 and 32.06 apply also to preparations based on colouring matter (including, in the case of heading 32.06, colouring pigments of heading 25.30 or Chapter 28, metal flakes and metal powders), of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations. The headings do not apply, however, to pigments dispersed in non-aqueous media, in liquid or paste form, of a kind used in the manufacture of paints, including enamels (heading 32.12), or to other preparations of heading 32.07, 32.08, 32.09, 32.10, 32.12, 32.13 or 32.15.
4. Heading 32.08 includes solutions (other than collodions) consisting of any of the products specified in headings 39.01 to 39.13 in volatile organic solvents when the weight of the solvent exceeds 50% of the weight of the solution.
5. The expression “colouring matter” in this Chapter does not include products of a kind used as extenders in oil paints, whether or not they are also suitable for colouring distempers.
6. The expression “stamping foils” in heading 32.12 applies only to thin sheets of a kind used for printing, for example, book covers or hat bands, and consisting of:
(a) Metallic powder (including powder of precious metal) or pigment, agglomerated with glue, gelatin or other binder; or
(b) Metal (including precious metal) or pigment, deposited on a supporting sheet of any material.
Notes
1. This Chapter does not cover:
(a) Natural oleoresins or vegetable extracts of heading 13.01 or 13.02;
(b) Soap and other products of heading 34.01; or
(c) Gum, wood or sulphate turpentine or other products of heading 38.05.
2. The expression “odoriferous substances” in heading 33.02 refers only to the substances of heading 33.01, to odoriferous constituents isolated from those substances or to synthetic aromatics.
3. Headings 33.03 to 33.07 apply, inter alia, to products, whether or not mixed (other than aqueous distillates and aqueous solutions of essential oils), suitable for use as goods of these headings and put up in packings of a kind sold by retail for such use.
4. The expression “perfumery, cosmetic or toilet preparations” in heading 33.07 applies, inter alia, to the following products: scented sachets; odoriferous preparations which operate by burning; perfumed papers and papers impregnated or coated with cosmetics; contact lens or artificial eye solutions; wadding, felt and nonwovens, impregnated, coated or covered with perfume or cosmetics; animal toilet preparations.
Table
Chapter 33 Essential oils
and resinoids; perfumery, cosmetic or toilet preparations
Notes
1. This Chapter does not cover:
(a) Edible mixtures or preparations of animal or vegetable fats or oils of a kind used as mould release preparations (heading 15.17);
(b) Separate chemically defined compounds; or
(c) Shampoos, dentifrices, shaving creams and foams, or bath preparations, containing soap or other organic surface-active agents (heading 33.05, 33.06 or 33.07).
2. For the purposes of heading 34.01, the expression “soap” applies only to soap soluble in water. Soap and the other products of heading 34.01 may contain added substances (for example, disinfectants, abrasive powders, fillers or medicaments). Products containing abrasive powders remain classified in heading 34.01 only if in the form of bars, cakes or moulded pieces or shapes. In other forms they are to be classified in heading 34.05 as “scouring powders and similar preparations”.
3. For the purposes of heading 34.02, “organic surface-active agents” are products which when mixed with water at a concentration of 0.5% at 20 °C and left to stand for one hour at the same temperature:
(a) give a transparent or translucent liquid or stable emulsion without separation of insoluble matter; and
(b) reduce the surface tension of water to 4.5 x 10-2 N/m (45 dyne/cm) or less.
4. In heading 34.03 the expression “petroleum oils and oils obtained from bituminous minerals” applies to the products defined in Note 2 to Chapter 27.
5. In heading 34.04, subject to the exclusions provided below, the expression “artificial waxes and prepared waxes” applies only to:
(a) Chemically produced organic products of a waxy character, whether or not water-soluble;
(b) Products obtained by mixing different waxes;
(c) Products of a waxy character with a basis of one or more waxes and containing fats, resins, mineral substances or other materials.
The heading does not apply to:
(a) Products of heading 15.16, 34.02 or 38.23, even if having a waxy character;
(b) Unmixed animal waxes or unmixed vegetable waxes, whether or not refined or coloured, of heading 15.21;
(c) Mineral waxes or similar products of heading 27.12, whether or not intermixed or merely coloured; or
(d) Waxes mixed with, dispersed in or dissolved in a liquid medium (headings 34.05, 38.09, etc.).
Notes
1. This Chapter does not cover:
(a) Yeasts (heading 21.02);
(b) Blood fractions (other than blood albumin not prepared for therapeutic or prophylactic uses), medicaments or other products of Chapter 30;
(c) Enzymatic preparations for pre-tanning (heading 32.02);
(d) Enzymatic soaking or washing preparations or other products of Chapter 34;
(e) Hardened proteins (heading 39.13); or
(f) Gelatin products of the printing industry (Chapter 49).
2. For the purposes of heading 35.05, the term “dextrins” means starch degradation products with a reducing sugar content, expressed as dextrose on the dry substance, not exceeding 10%.
Such products with a reducing sugar content exceeding 10% fall in heading 17.02.
Statistical note
1. For the purposes of subheading 3506.91, adhesives based on copolymers shall be classified according to principles for the classification of copolymers outlined in the Explanatory Notes to Chapter 39.
Table
Chapter 35 Albuminoidal
substances; modified starches; glues; enzymes
Notes
1. This Chapter does not cover separate chemically defined compounds other than those described in Note 2 (a) or (b) below.
2. The expression “articles of combustible materials” in heading 36.06 applies only to:
(a) Metaldehyde, hexamethylenetetramine and similar substances, put up in forms (for example, tablets, sticks or similar forms) for use as fuels; fuels with a basis of alcohol, and similar prepared fuels, in solid or semi-solid form;
(b) Liquid or liquefied-gas fuels in containers of a kind used for filling or refilling cigarette or similar lighters and of a capacity not exceeding 300 cm3; and
(c) Resin torches, firelighters and the like.
Notes
1. This Chapter does not cover waste or scrap.
2. In this Chapter the word “photographic” relates to the process by which visible images are formed, directly or indirectly, by the action of light or other forms of radiation on photosensitive surfaces.
Table
Chapter 37 Photographic or
cinematographic goods
Notes
1. This Chapter does not cover:
(a) Separate chemically defined elements or compounds with the exception of the following:
(1) Artificial graphite (heading 38.01);
(2) Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up as described in heading 38.08;
(3) Products put up as charges for fire-extinguishers or put up in fire-extinguishing grenades (heading 38.13);
(4) Certified reference materials specified in Note 2 below;
(5) Products specified in Note 3 (a) or 3 (c) below;
(b) Mixtures of chemicals with foodstuffs or other substances with nutritive value, of a kind used in the preparation of human foodstuffs (generally, heading 21.06);
(c) Slag, ash and residues (including sludges, other than sewage sludge), containing metals, arsenic or their mixtures and meeting the requirements of Note 3 (a) or 3 (b) to Chapter 26 (heading 26.20);
(d) Medicaments (heading 30.03 or 30.04); or
(e) Spent catalysts of a kind used for the extraction of base metals or for the manufacture of chemical compounds of base metals (heading 26.20), spent catalysts of a kind used principally for the recovery of precious metal (heading 71.12) or catalysts consisting of metals or metal alloys in the form of, for example, finely divided powder or woven gauze (Section XIV or XV).
2. (A) For the purpose of heading 38.22, the expression “certified reference materials” means reference materials which are accompanied by a certificate which indicates the values of the certified properties, the methods used to determine these values and the degree of certainty associated with each value and which are suitable for analytical, calibrating or referencing purposes.
(B) With the exception of the products of Chapter 28 or 29, for the classification of certified reference materials, heading 38.22 shall take precedence over any other heading in the Nomenclature.
3. Heading 38.24 includes the following goods which are not to be classified in any other heading of the Nomenclature:
(a) Cultured crystals (other than optical elements) weighing not less than 2.5 g each, of magnesium oxide or of the halides of the alkali or alkaline-earth metals;
(b) Fusel oil; Dippel’s oil;
(c) Ink removers put up in packings for retail sale;
(d) Stencil correctors and other correcting fluids put up in packings for retail sale; and
(e) Ceramic firing testers, fusible (for example, Seger cones).
4. Throughout the Nomenclature, “municipal waste” means waste of a kind collected from households, hotels, restaurants, hospitals, shops, offices, etc., road and pavement sweepings, as well as construction and demolition waste. Municipal waste generally contains a large variety of materials such as plastics, rubber, wood, paper, textiles, glass, metals, food materials, broken furniture and other damaged or discarded articles. The term “municipal waste”, however, does not cover:
(a) Individual materials or articles segregated from the waste, such as wastes of plastics, rubber, wood, paper, textiles, glass or metals and spent batteries which fall in their appropriate headings of the Nomenclature;
(b) Industrial waste;
(c) Waste pharmaceuticals, as defined in Note 4 (k) to Chapter 30; or
(d) Clinical waste, as defined in Note 6 (a) below.
5. For the purposes of heading 38.25, “sewage sludge” means sludge arising from urban effluent treatment plant and includes pre-treatment waste, scourings and unstabilized sludge. Stabilized sludge when suitable for use as fertilizer is excluded (Chapter 31).
6. For the purposes of heading 38.25, the expression “other wastes” applies to:
(a) Clinical waste, that is, contaminated waste arising from medical research, diagnosis, treatment or other medical, surgical, dental or veterinary procedures, which often contain pathogens and pharmaceutical substances and require special disposal procedures (for example, soiled dressings, used gloves and used syringes);
(b) Waste organic solvents;
(c) Wastes of metal pickling liquors, hydraulic fluids, brake fluids and anti-freezing fluids; and
(d) Other wastes from chemical or allied industries.
The expression “other wastes” does not, however, cover wastes which contain mainly petroleum oils or oils obtained from bituminous minerals (heading 27.10).
Subheading notes
1. Subheading 3808.50 covers only goods of heading 38.08, containing one or more of the following substances: aldrin (ISO); binapacryl (ISO); camphechlor (ISO) (toxaphene); captafol (ISO); chlordane (ISO); chlordimeform (ISO); chlorobenzilate (ISO); DDT (ISO) (clofenotane (INN), 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane); dieldrin (ISO, INN); dinoseb (ISO), its salts or its esters; ethylene dibromide (ISO) (1,2-dibromoethane); ethylene dichloride (ISO) (1,2-dichloroethane); fluoroacetamide (ISO); heptachlor (ISO); hexachlorobenzene (ISO); 1,2,3,4,5,6-hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN); mercury compounds; methamidophos (ISO); monocrotophos (ISO); oxirane (ethylene oxide); parathion (ISO); parathion-methyl (ISO) (methyl-parathion); pentachlorophenol (ISO); phosphamidon (ISO); 2,4,5-T (ISO) (2,4,5-trichlorophenoxyacetic acid), its salts or its esters.
2. For the purposes of subheadings 3825.41 and 3825.49, “waste organic solvents” are wastes containing mainly organic solvents, not fit for further use as presented as primary products, whether or not intended for recovery of the solvents.
Table
Chapter 38 Miscellaneous chemical products