Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please "contact us" to request a format other than those available.



MethodologySurvey universe Survey universeSLID is a household survey that covers all individuals in Canada, excluding residents of the Yukon, the Northwest Territories and Nunavut, residents of institutions and persons living on Indian reserves or in military barracks. Overall, these exclusions amount to less than three percent of the population. The sampleThe samples for SLID are selected from the monthly Labour Force Survey (LFS) and thus share the latter's sample design. The LFS sample is drawn from an area frame and is based on a stratified, multistage design that uses probability sampling. The total sample is composed of six independent samples, called rotation groups, because each month one sixth of the sample (or one rotation group) is replaced. The SLID sample is composed of two panels. Each panel consists of two LFS rotation groups and includes roughly 17,000 households. A panel is surveyed for a period of six consecutive years. A new panel is introduced every three years, so two panels always overlap. WeightingThe estimation of population characteristics from a survey is based on the premise that each sampled unit represents, in addition to itself, a certain number of unsampled units in the population. A basic survey weight is attached to each record to indicate the number of units in the population that are represented by that unit in the sample. For each reference year, SLID produces two sets of weights: one is representative of the initial population (the longitudinal weights) while the other is representative of the current population (the crosssectional weights). For the production of the crosssectional weights, SLID combines two independent samples and assigns a probability of selection to individuals who joined the sample after the panel was selected. Two types of adjustment are applied to the basic survey weights in order to improve the reliability of the estimates. The basic weights are first inflated to compensate for nonresponse. The nonresponse adjusted weights are then further adjusted to ensure that estimates on relevant population characteristics would respect population totals from sources other than the survey. The first set of population totals used for SLID is based on Statistics Canada's Demography Division population counts for different age/sex groups as well as counts by household and family size at the provincial level. These annual population totals are based in large part on totals from the Census of population. The second set of totals is derived from Canada Revenue Agency (CRA) administrative data (T4 file) and is intended to ensure that the weighted distribution of income (based on wages and salaries) in the data set matches that of the Canadian population. The switch from 1996 to 2001 Censusbased population totals for recent years and the use of T4 information from CRA were introduced with the release of data for 2003. SCF estimates from 1990 to 1995 and SLID estimates from 1996 to 2002 were revised back to 1990 at the same time Crosssectional representationEach longitudinal sample, or “panel” in SLID initially constitutes a representative crosssectional sample of the population. However, because the real population changes each year, whereas by design the longitudinal sample does not, the sample must be modified to properly reflect these changes to the composition of the population. This is done by adding to the sample all new people in the population who are found to be living with the initial respondents (and likewise dropping them from the sample if they leave at later timepoints). Any original respondents who leave the target population (by moving abroad, into institutions, etc.) are given a zero weight for crosssectional purposes. In this way, the crosssectional sample, composed of the original respondents minus those who left the target population plus those who have entered it, is virtually fully representative of the population at each subsequent timepoint. The missing group is composed of persons who have newly entered the target population and are not living with anyone who was in the target population when the most recent panel was selected. However, since SLID introduces a new panel every three years, this group is quite small Data qualityThere are two types of errors inherent in sample survey data, namely, nonsampling errors and sampling errors. The reliability of survey estimates depends on the combined impact of nonsampling and sampling errors. For more detailed information on data quality indicators see (link to working paper but registration in progress) Nonsampling errorsNonsampling errors generally result from human errors such as simple mistakes, misunderstanding or misinterpretation. The impact of randomly occurring errors over a large number of observations will be minimal. Errors occurring systematically can, on the other hand, have a major impact on the reliability of estimates. Considerable time and effort is invested into reducing nonsampling errors in SLID. Nonsampling errors may arise from a variety of sources such as coverage, response, nonresponse and processing errors. Coverage error arises when sampling frame units do not exactly represent the target population. Units may have been omitted from the sampling frame (undercoverage), or units not in the target population may have been included (overcoverage), or units may have been included more than once (duplicates). Undercoverage represents the most common coverage problem. Slippage is a measure of survey coverage error. It is defined as the percentage difference between control totals (Census population projections) and weighted sample counts. Slippage rates for household surveys are generally positive because some people that should be enumerated are missed. Slippage rates have been revised back to 1996 using the 2001 Census population projections. According to the numbers in the table below, in 2003, SLID covered 86.5% of its target population. SLID estimation procedures use Census population projections to compensate for determined slippage. Rates are also available upon request for sex, province and age groupings. Table E. Slippage rates in SLID
Response errors may be due to many factors, such as faulty questionnaire design, interviewers' or respondents' misinterpretation of questions, or respondents' faulty reporting. Great effort is invested in SLID to reduce the occurrence of response error. Measures undertaken to minimize response errors include the use of highlyskilled and welltrained interviewers, and supervision of interviewers to detect misinterpretation of instructions or problems with the questionnaire design. Response error can also be brought about by respondents who, willingly or not, provide inaccurate responses. Income data are especially prone to misreporting, as income is a sensitive issue and includes many items with which respondents are not always familiar. Therefore, respondents are provided with information by mail prior to the interview, informing them of the income related questions. This gives them time to consult documents and have information available at the time of the interview. For respondents who grant Statistics Canada permission to access their tax files (the majority of respondents), SLID collects income data directly from administrative files. This procedure reduces misreporting of income in the SLID. Nonresponse errors occur in sample surveys because not all potential respondents cooperate fully. The extent of nonresponse varies from partial nonresponse to total nonresponse. Total nonresponse occurs when the interviewer is unable to contact the respondent, no member of the household is able to provide information, or the respondent refuses to participate in the survey. Response is calculated at the household level. A household is considered to be “respondent” if at least one of its members responds to either the January or the May interview. There is the additional stipulation that the information on the household's composition cannot be missing for more than one year. Total household nonresponse is handled by adjusting the basic survey weight for individuals within responding households to compensate for individuals in nonresponding households. Nonresponding members (if any) within responding households who did not respond to one or both of the collection phases will have final data that is either shown as “missing” on the final database or imputed, depending on the variable (see partial non response section for details on imputation). The importance of the nonresponse error is unknown but in general this error is significant when a group of people with particular characteristics in common refuse to cooperate and where those characteristics are important determinants of survey results. The bias introduced by nonresponse increases with the differences between respondent and nonrespondent characteristics. Methods employed to compensate for nonresponse make use of information available for both respondents and nonrespondents in an attempt to minimize this bias. High response rates are essential for the data quality of any survey and thus considerable effort is invested to encourage effective participation from SLID respondents. Crosssectional response rates, given in Table F, range between 78.3% (2003) and 86.0% (1996). Table F: Response rate in SCF (19901995) and SLID (19962003)
Partial non response occurs when the respondent does not understand or misinterprets a question, refuses to answer a question, or is unable to recall the requested information. Imputing missing values compensates for this partial nonresponse. Income data are imputed using previous years' data updated for any changes in circumstances. In the absence of previous years' data, data is imputed using the “nearest neighbour” technique, in which a respondent with certain similar characteristics becomes the “donor” for the imputed value. Amounts received through certain government programs, such as child tax benefits, the Goods and Services Harmonized Sales Tax Credit, and the Guaranteed Income Supplement, are also derived from other information. Data obtained from the tax route are complete and do not need imputation. Processing errors can occur at various stages in the survey: data capture, editing, coding, weighting or tabulation. The computerassisted collection method used for SLID reduces the chance of introducing capture errors because checks for consistency and completeness of the data are built into the computer application. To minimize coding, weighting or tabulation errors, diagnostic tests are carried out periodically. These tests include comparisons of results with other data sources Sampling errorsSampling errors occur because inferences about the entire population are based on information obtained from only a sample of the population. The results are usually different from those that would be obtained if information were collected from the whole population. Errors due to the extension of conclusions based on the sample to the entire population are known as sampling errors. The sample design, the variability of the population characteristics measured by the survey, and the sample size determine the magnitude of the sampling error. In addition, for a given sample design, different methods of estimation will result in sampling errors of different sizes. Standard error and coefficient of variationA common measure of sampling error is the standard error (SE). The standard error measures the degree of variation introduced in estimates by selecting one particular sample rather than another of the same size and design. The standard error may also be used to calculate confidence intervals associated with an estimate (Y). Confidence intervals are used to express the precision of the estimate. It has been demonstrated mathematically that, if the sampling were repeated many times, the true population value would lie within the confidence interval Y ± 2SE 95 times out of 100 and within the narrower confidence interval defined by Y ± SE, 68 times out of 100. Another important measure of sampling error is given by the coefficient of variation, which is computed as the estimated standard error as a percentage of the estimate Y (i.e., 100 × SE / Y). To illustrate the relationship between the standard error, the confidence intervals and the coefficient of variation, let us take the following example. Suppose that the estimated average income from a given source is $10,000, and that its corresponding standard error is $200. The coefficient of variation is therefore equal to 2%. The 95% confidence interval estimated from this sample ranges from $9,600 to $10,400, i.e. $10,000 ± $400. Thus it is assumed with a 95% degree of confidence that the average income of the target population is between $9,600 and $10,400. The bootstrap approach is used for the calculation of the standard errors of the estimates. For more information on standard errors and coefficients of variation, refer to the Statistics Canada publication, Methodology of the Canadian Labour Force Survey Quality IndicatorsQuality indicators (QIs) are based on the estimate's coefficient of variation (CV) and suppression rules. At present, quality indicators are applied mostly to the 2003 estimates with the exception of a few longitudinal tables. For years where the quality indicators are not available, they are omitted. The following symbols are used: Table D. Quality rules
Suppression rulesSuppression rules, or data reliability cutoffs, are currently established based on the sample size that underlies the estimate. In general, a sample size of 25 observations is required for the estimate to be published. Depending on the type of estimate, this rule can vary slightly. These rules help protect the confidentiality of survey respondents and ensure the reliability of estimates. Table C. Suppression rules
*The denominator sample size refers to the sample size of the total estimate from which the distribution, percentage, proportion or share is derived. 
