Analysis

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: As the twelfth goal outlined in the 2030 Agenda for Sustainable Development, Canada and other UN member states have committed to ensure sustainable consumption and production patterns by 2030. This 2024 infographic provides an overview of indicators underlying the twelfth Sustainable Development Goal in support of responsible consumption and production, and the statistics and data sources used to monitor and report on this goal in Canada.

Description: The purpose of this research paper is to highlight the impact of the many challenges faced over time by the sawmill industry on its development and its role as an economic lever for many Canadian communities.

Description:

This infographic looks at the impact the pandemic and supply chain disruptions have had on manufacturing in Canada. Specific data that is collected by the Monthly Survey of Manufacturing is shown on the infographic to help highlight the impacts.

Description:

The federal government offers business innovation and growth support through program streams managed by its departments and agencies. In 2017, enterprises in the manufacturing sector accounted for almost one-quarter of the beneficiaries of this support and received almost one-third of the total value of support (Statistics Canada, 2020). The objective of this analysis is to assess the impact of federal growth and innovation support on the employment and revenue of beneficiary enterprises in the manufacturing sector between 2007 and 2017. This analysis suggests that enterprises that received federal support for growth and innovation experienced stronger employment and revenue growth relative to non-beneficiary enterprises. Over the three years following receipt of support, employment growth for beneficiary enterprises averaged 1.8% per year while, on average, enterprises that did not receive support experienced employment declines. Over the same period, the average annual revenue growth of beneficiary enterprises was higher than that of non-beneficiary enterprises by 4.6 percentage points.

Description: This infographic features sales and inventories for the petroleum and coal products industry, as well as refinery production, while highlighting the impacts related to the COVID-19 pandemic.

Description: As the twelfth goal outlined in the 2030 Agenda for Sustainable Development, Canada and other UN member states have committed to ensure sustainable consumption and production patterns by 2030. This 2020 infographic provides an overview of indicators underlying the twelfth Sustainable Development Goal in support of responsible consumption and production, and the statistics and data sources used to monitor and report on this goal in Canada.

Description:

From the early 2000s to the mid-2010s, the number of employees in manufacturing fell by roughly half a million in Canada. During that period, the percentage of Canadian men aged 21 to 55 employed mainly full time for at least 48 weeks in a given year fell by 5 percentage points, from 63.6% in 2000 to 58.6% in 2015. This study investigates whether the two trends are connected, i.e., whether the decline in manufacturing employment caused a decline in employment rates and wages among men.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

This infographic looks at the impact the pandemic and supply chain disruptions have had on manufacturing in Canada. Specific data that is collected by the Monthly Survey of Manufacturing is shown on the infographic to help highlight the impacts.

Description: This infographic features sales and inventories for the petroleum and coal products industry, as well as refinery production, while highlighting the impacts related to the COVID-19 pandemic.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: As the twelfth goal outlined in the 2030 Agenda for Sustainable Development, Canada and other UN member states have committed to ensure sustainable consumption and production patterns by 2030. This 2024 infographic provides an overview of indicators underlying the twelfth Sustainable Development Goal in support of responsible consumption and production, and the statistics and data sources used to monitor and report on this goal in Canada.

Description: The purpose of this research paper is to highlight the impact of the many challenges faced over time by the sawmill industry on its development and its role as an economic lever for many Canadian communities.

Description:

The federal government offers business innovation and growth support through program streams managed by its departments and agencies. In 2017, enterprises in the manufacturing sector accounted for almost one-quarter of the beneficiaries of this support and received almost one-third of the total value of support (Statistics Canada, 2020). The objective of this analysis is to assess the impact of federal growth and innovation support on the employment and revenue of beneficiary enterprises in the manufacturing sector between 2007 and 2017. This analysis suggests that enterprises that received federal support for growth and innovation experienced stronger employment and revenue growth relative to non-beneficiary enterprises. Over the three years following receipt of support, employment growth for beneficiary enterprises averaged 1.8% per year while, on average, enterprises that did not receive support experienced employment declines. Over the same period, the average annual revenue growth of beneficiary enterprises was higher than that of non-beneficiary enterprises by 4.6 percentage points.

Description: As the twelfth goal outlined in the 2030 Agenda for Sustainable Development, Canada and other UN member states have committed to ensure sustainable consumption and production patterns by 2030. This 2020 infographic provides an overview of indicators underlying the twelfth Sustainable Development Goal in support of responsible consumption and production, and the statistics and data sources used to monitor and report on this goal in Canada.

Description:

From the early 2000s to the mid-2010s, the number of employees in manufacturing fell by roughly half a million in Canada. During that period, the percentage of Canadian men aged 21 to 55 employed mainly full time for at least 48 weeks in a given year fell by 5 percentage points, from 63.6% in 2000 to 58.6% in 2015. This study investigates whether the two trends are connected, i.e., whether the decline in manufacturing employment caused a decline in employment rates and wages among men.

Description: The need to measure both the desirable outputs (goods and services) and the undesirable outputs (emissions of greenhouse gases [GHGs] and criteria air contaminants [CACs]) from economic activity is becoming increasingly important as economic performance and environmental performance become ever more intertwined. Standard measures of multifactor productivity (MFP) growth provide insights into rising standards of living and the performance of economies, but they may be misleading if only desirable outputs are considered. This study presents estimates of environmentally adjusted multifactor productivity (EAMFP) growth using a new comprehensive database. This database contains information on GHG and CAC emissions, as well as on the production activities of Canadian manufacturers.

Description:

The industrial capacity utilization rate (ICUR) is the ratio of an industry’s actual output to its estimated potential output—it represents the intensity with which industries use their production capacity. The rate provides insight into the overall slack in the economy or in a firm at a given point in time.

Description:

The paper investigates recent changes in the importance of foreign ownership in Canadian manufacturing in the 2000s, and also compares these changes to those in the previous decades from 1973 to 1999. The importance of foreign firms in manufacturing is measured by the share of output under foreign control, and its changes are examined at different levels: aggregate, sector and industry.

Description:

Output growth in Canadian manufacturing was slower in the 2000s than in the 1990s. The sector’s real output declined, in contrast to an overall increase in output in the business sector (Clarke and Couture 2017). It fell rapidly during the 2007-to-2009 financial crisis, and returned to its pre-crisis level only in 2016. The market share of foreign-controlled firms also declined after 2000 (Baldwin and Li 2017).

This paper examines the role of multinationals and reallocation in productivity growth in the Canadian manufacturing sector for the period from 2001 to 2010, a period of significant change in this sector. It contributes to the literature on several fronts. First, it complements the literature by examining productivity growth at the firm level. This paper also seeks to examine whether the decline that started around 2006 was associated with changes in the effect of reallocation and the role of foreign multinationals in aggregate productivity growth.

Description:

This Economic Insights article reports on changes in the Canadian manufacturing sector since 2000. Using data from the Canadian System of National Accounts and the U.S. Bureau of Economic Analysis, it provides an analysis of recent trends in Canadian manufacturing sector output, as well as a decomposition of the contribution of manufacturing industries to the evolution of the sector and a comparison with the United States.

Description:

Presented in almanac style, the 2012 Canada Year Book contains more than 500 pages of tables, charts and succinct analytical articles on every major area of Statistics Canada's expertise. The Canada Year Book is the premier reference on the social and economic life of Canada and its citizens.

Description:

This document describes all aspects of output-based Gross Domestic Product (GDP), also known as GDP by industry or simply monthly GDP. It contains a comprehensive record of specific methodologies and data sources, on an industry by industry basis.

It is meant to complement a previous Statistics Canada publication, released in November 2002, entitled Gross Domestic Product by Industry, Sources and Methods (Catalogue no. 15-547), which discusses in general terms the concepts, definitions, classifications and statistical methods underlying the monthly GDP measures.

Description:

This publication of the Canadian food processing industry provides an overview of industry trends and comparisons with the other G-7 countries.

Description:

The Canada e-Book is an online version of the Canada Year Book with texts, tables, charts and audio clips that present the country's economic and social trends. The Canada e-Book illustrates Canada and Canadians under four broad headings: The Land, The People, The Economy, and The State. You will find a wealth of information on topics including the human imprint on the environment, population and demography, health, education, household and family life, labour force, arts and leisure, industries, finance, government and justice. All Canadians will enjoy this useful reference that helps explain the social, economic and cultural forces that shape our nation.

Description:

The intent of this research paper series is to address a variety of topics related to the Canadian manufacturing sector as a whole. The papers in this series are based on the Annual Survey of Manufactures (ASM) and focus on the entire manufacturing sector (all 22 major manufacturing groups). Other data sources are used in specific papers. The topics covered include packaging products used by manufacturing industries, evolution of production costs, comparison of establishment groups (ranked by volume of shipments) and stages of processing.

Description:

Fabricated metal products industries remain in the middle of an expansion period. The construction sector's vitality, as well as the high North-American demand for industrial products, allow metal products manufacturers to live glorious days. However, where competitiveness is concerned, there could be trouble in paradise. In the last few years, the cost of labour has been on the rise, while the value added for each paid hour has been weakening. Moreover, imports have been increasing at a higher pace than exports in the last two years.

Description:

Data from the Annual Survey of manufactures (ASM) is the prime source for this publication. The results of the 1997 survey are supplemented by data from sub-annual Statistics Canada surveys and major economic indicators.

Description:

The latest issue contains the article "Performance of the textile products industries. by Yasmin Sheikh. The business climate under which the manufacturing sector has been operating has evolved particularly in the last decade. Within manufacturing, certain industries have responded better than others to the challenge brought about by advancement in technology and increased globalization. Textile products was the fastest growing industry in terms of Gross Domestic Product (GDP) from 1961 to 1987 compared to the overall economy, the manufacturing sector and closely related Primary Textile Industries. However, this industry's GDP declined sharply between 1988 and 1992. Except for 1996, the industry again experienced growth from 1993 onwards but its GDP growth index is well below its peak in 1987.

Results of the Annual Survey of Manufacturers show that manufacturing shipments of textile products in constant 1992 dollars peaked in 1988 and have since declined. This paper reviews data from this survey for the period 1988 to 1997 to underline the changes in the size, structure and performance of this industry and how it has fared in comparison to the Primary Textiles Industry. It also highlights current developments using results of the Monthly Survey of Manufacturers.

Description:

The latest issue contains the article "Refined petroleum and coal products industries" by Randall Sheldrick. The Canadian economy has been on the rise for almost a decade. But, the economy suffered a modest set back in 1998 due to the effects of the Asian economic and financial market crisis. While most manufacturing industries continued to expand, resource-based industries such as refined petroleum were hard hit by a slump in commodity prices.

This document presents an overview of the Refined Petroleum Products Industry. Most of the findings are based on the Annual Survey of Manufactures (ASM). According to this survey the total value of shipments for the industry stalled at just over $21 billion in 1997. Despite the fact that the industry tends to be cyclical in nature, demand for refined petroleum products is expected to increase steadily into the next century.

Description:

The most recent issue contains the article "The beverage industries: two markets" by Peter Zylstra.This paper presents recent developments in the Beverage Industries. Following a brief introduction, the industry is analysed in terms of the four component sub-industries, which fall into two groups: soft drinks and alcoholic beverages. The two groups constitute different overall markets. The summary of recent developments is based on results of the 1997 Annual Survey of Manufactures (ASM). Other sources are used to provide industry environment and economic backgroun.