# Inference and foundations

## Filter results by

Search Help### Keyword(s)

### Type

### Survey or statistical program

### Results

## All (82)

## All (82) (60 to 70 of 82 results)

- Surveys and statistical programs – Documentation: 11-522-X19990015650Description:
The U.S. Manufacturing Plant Ownership Change Database (OCD) was constructed using plant-level data taken from the Census Bureau's Longitudinal Research Database (LRD). It contains data on all manufacturing plants that have experienced ownership change at least once during the period 1963-92. This paper reports the status of the OCD and discuss its research possibilities. For an empirical demonstration, data taken from the database are used to study the effects of ownership changes on plant closure.

Release date: 2000-03-02 - Articles and reports: 11-522-X19990015654Description:
A meta analysis was performed to estimate the proportion of liver carcinogens, the proportion of chemicals carcinogenic at any site, and the corresponding proportion of anticarcinogens among chemicals tested in 397 long-term cancer bioassays conducted by the U.S. National Toxicology Program. Although the estimator used was negatively biased, the study provided persuasive evidence for a larger proportion of liver carcinogens (0.43,90%CI: 0.35,0.51) than was identified by the NTP (0.28). A larger proportion of chemicals carcinogenic at any site was also estimated (0.59,90%CI: 0.49,0.69) than was identified by the NTP (0.51), although this excess was not statistically significant. A larger proportion of anticarcinogens (0.66) was estimated than carcinogens (0.59). Despite the negative bias, it was estimated that 85% of the chemicals were either carcinogenic or anticarcinogenic at some site in some sex-species group. This suggests that most chemicals tested at high enough doses will cause some sort of perturbation in tumor rates.

Release date: 2000-03-02 - Surveys and statistical programs – Documentation: 11-522-X19990015658Description:
Radon, a naturally occurring gas found at some level in most homes, is an established risk factor for human lung cancer. The U.S. National Research Council (1999) has recently completed a comprehensive evaluation of the health risks of residential exposure to radon, and developed models for projecting radon lung cancer risks in the general population. This analysis suggests that radon may play a role in the etiology of 10-15% of all lung cancer cases in the United States, although these estimates are subject to considerable uncertainty. In this article, we present a partial analysis of uncertainty and variability in estimates of lung cancer risk due to residential exposure to radon in the United States using a general framework for the analysis of uncertainty and variability that we have developed previously. Specifically, we focus on estimates of the age-specific excess relative risk (ERR) and lifetime relative risk (LRR), both of which vary substantially among individuals.

Release date: 2000-03-02 - 64. Delineation of Canada's North: An Examination of the North-South Relationship in Canada ArchivedArticles and reports: 92F0138M2000003Description:
Statistics Canada's interest in a common delineation of the north for statistical analysis purposes evolved from research to devise a classification to further differentiate the largely rural and remote areas that make up 96% of Canada's land area. That research led to the establishment of the census metropolitan area and census agglomeration influenced zone (MIZ) concept. When applied to census subdivisions, the MIZ categories did not work as well in northern areas as in the south. Therefore, the Geography Division set out to determine a north-south divide that would differentiate the north from the south independent of any standard geographic area boundaries.

This working paper describes the methodology used to define a continuous line across Canada to separate the north from the south, as well as lines marking transition zones on both sides of the north-south line. It also describes the indicators selected to derive the north-south line and makes comparisons to alternative definitions of the north. The resulting classification of the north complements the MIZ classification. Together, census metropolitan areas, census agglomerations, MIZ and the North form a new Statistical Area Classification (SAC) for Canada.

Two related Geography working papers (catalogue no. 92F0138MPE) provide further details about the MIZ classification. Working paper no. 2000-1 (92F0138MPE00001) briefly describes MIZ and includes tables of selected socio-economic characteristics from the 1991 Census tabulated by the MIZ categories, and working paper no. 2000-2 (92F0138MPE00002) describes the methodology used to define the MIZ classification.

Release date: 2000-02-03 - 65. Comparative Study of Analytical Consumer Price Indexes for Different Subgroups of the Reference Population ArchivedArticles and reports: 62F0014M1998013Geography: CanadaDescription:
The reference population for the Consumer Price Index (CPI) has been represented, since the 1992 updating of the basket of goods and services, by families and unattached individuals living in private urban or rural households. The official CPI is a measure of the average percentage change over time in the cost of a fixed basket of goods and services purchased by Canadian consumers.

Because of the broadly defined target population of the CPI, the measure has been criticised for failing to reflect the inflationary experiences of certain socio-economic groups. This study examines this question for three sub-groups of the reference population of the CPI. It is an extension of earlier studies on the subject done at Statistics Canada.

In this document, analytical consumer price indexes sub-group indexes are compared to the analytical index for the whole population calculated at the national geographic level.

The findings tend to point to those of earlier Statistics Canada studies on sub-groups in the CPI reference population. Those studies have consistently concluded that a consumer price index established for a given sub-group does not differ substantially from the index for the whole reference population.

Release date: 1999-05-13 - Geographic files and documentation: 92F0138M1993001Geography: CanadaDescription:
The Geography Divisions of Statistics Canada and the U.S. Bureau of the Census have commenced a cooperative research program in order to foster an improved and expanded perspective on geographic areas and their relevance. One of the major objectives is to determine a common geographic area to form a geostatistical basis for cross-border research, analysis and mapping.

This report, which represents the first stage of the research, provides a list of comparable pairs of Canadian and U.S. standard geographic areas based on current definitions. Statistics Canada and the U.S. Bureau of the Census have two basic types of standard geographic entities: legislative/administrative areas (called "legal" entities in the U.S.) and statistical areas.

The preliminary pairing of geographic areas are based on face-value definitions only. The definitions are based on the June 4, 1991 Census of Population and Housing for Canada and the April 1, 1990 Census of Population and Housing for the U.S.A. The important aspect is the overall conceptual comparability, not the precise numerical thresholds used for delineating the areas.

Data users should use this report as a general guide to compare the census geographic areas of Canada and the United States, and should be aware that differences in settlement patterns and population levels preclude a precise one-to-one relationship between conceptually similar areas. The geographic areas compared in this report provide a framework for further empirical research and analysis.

Release date: 1999-03-05 - 67. Inverse sampling design algorithms ArchivedSurveys and statistical programs – Documentation: 12-001-X19970013101Description:
In the main body of statistics, sampling is often disposed of by assuming a sampling process that selects random variables such that they are independent and identically distributed (IID). Important techniques, like regression and contingency table analysis, were developed largely in the IID world; hence, adjustments are needed to use them in complex survey settings. Rather than adjust the analysis, however, what is new in the present formulation is to draw a second sample from the original sample. In this second sample, the first set of selections are inverted, so as to yield at the end a simple random sample. Of course, to employ this two-step process to draw a single simple random sample from the usually much larger complex survey would be inefficient, so multiple simple random samples are drawn and a way to base inferences on them developed. Not all original samples can be inverted; but many practical special cases are discussed which cover a wide range of practices.

Release date: 1997-08-18 - Surveys and statistical programs – Documentation: 12-001-X19970013102Description:
The selection of auxiliary variables is considered for regression estimation in finite populations under a simple random sampling design. This problem is a basic one for model-based and model-assisted survey sampling approaches and is of practical importance when the number of variables available is large. An approach is developed in which a mean squared error estimator is minimised. This approach is compared to alternative approaches using a fixed set of auxiliary variables, a conventional significance test criterion, a condition number reduction approach and a ridge regression approach. The proposed approach is found to perform well in terms of efficiency. It is noted that the variable selection approach affects the properties of standard variance estimators and thus leads to a problem of variance estimation.

Release date: 1997-08-18 - 69. A transformation method for finite population sampling calibrated with empirical likelihood ArchivedSurveys and statistical programs – Documentation: 12-001-X19960022980Description:
In this paper, we study a confidence interval estimation method for a finite population average when some auxiliairy information is available. As demonstrated by Royall and Cumberland in a series of empirical studies, naive use of existing methods to construct confidence intervals for population averages may result in very poor conditional coverage probabilities, conditional on the sample mean of the covariate. When this happens, we propose to transform the data to improve the precision of the normal approximation. The transformed data are then used to make inference on the original population average, and the auxiliary information is incorporated into the inference directly, or by calibration with empirical likelihood. Our approach is design-based. We apply our approach to six real populations and find that when transformation is needed, our approach performs well compared to the usual regression method.

Release date: 1997-01-30 - Articles and reports: 91F0015M1996001Geography: CanadaDescription:
This paper describes the methodology for fertility projections used in the 1993-based population projections by age and sex for Canada, provinces and territories, 1993-2016. A new version of the parametric model known as the Pearsonian Type III curve was applied for projecting fertility age pattern. The Pearsonian Type III model is considered as an improvement over the Type I used in the past projections. This is because the Type III curve better portrays both the distribution of the age-specific fertility rates and the estimates of births. Since the 1993-based population projections are the first official projections to incorporate the net census undercoverage in the population base, it has been necessary to recalculate fertility rates based on the adjusted population estimates. This recalculation resulted in lowering the historical series of age-specific and total fertility rates, 1971-1993. The three sets of fertility assumptions and projections were developed with these adjusted annual fertility rates.

It is hoped that this paper will provide valuable information about the technical and analytical aspects of the current fertility projection model. Discussions on the current and future levels and age pattern of fertility in Canada, provinces and territories are also presented in the paper.

Release date: 1996-08-02

- Previous Go to previous page of All results
- 1 Go to page 1 of All results
- ...
- 3 Go to page 3 of All results
- 4 Go to page 4 of All results
- 5 Go to page 5 of All results
- 6 Go to page 6 of All results
- 7 (current) Go to page 7 of All results
- 8 Go to page 8 of All results
- 9 Go to page 9 of All results
- Next Go to next page of All results

## Data (0)

## Data (0) (0 results)

No content available at this time.

## Analysis (69)

## Analysis (69) (50 to 60 of 69 results)

- Articles and reports: 11-522-X19990015654Description:
A meta analysis was performed to estimate the proportion of liver carcinogens, the proportion of chemicals carcinogenic at any site, and the corresponding proportion of anticarcinogens among chemicals tested in 397 long-term cancer bioassays conducted by the U.S. National Toxicology Program. Although the estimator used was negatively biased, the study provided persuasive evidence for a larger proportion of liver carcinogens (0.43,90%CI: 0.35,0.51) than was identified by the NTP (0.28). A larger proportion of chemicals carcinogenic at any site was also estimated (0.59,90%CI: 0.49,0.69) than was identified by the NTP (0.51), although this excess was not statistically significant. A larger proportion of anticarcinogens (0.66) was estimated than carcinogens (0.59). Despite the negative bias, it was estimated that 85% of the chemicals were either carcinogenic or anticarcinogenic at some site in some sex-species group. This suggests that most chemicals tested at high enough doses will cause some sort of perturbation in tumor rates.

Release date: 2000-03-02 - 52. Delineation of Canada's North: An Examination of the North-South Relationship in Canada ArchivedArticles and reports: 92F0138M2000003Description:
Statistics Canada's interest in a common delineation of the north for statistical analysis purposes evolved from research to devise a classification to further differentiate the largely rural and remote areas that make up 96% of Canada's land area. That research led to the establishment of the census metropolitan area and census agglomeration influenced zone (MIZ) concept. When applied to census subdivisions, the MIZ categories did not work as well in northern areas as in the south. Therefore, the Geography Division set out to determine a north-south divide that would differentiate the north from the south independent of any standard geographic area boundaries.

This working paper describes the methodology used to define a continuous line across Canada to separate the north from the south, as well as lines marking transition zones on both sides of the north-south line. It also describes the indicators selected to derive the north-south line and makes comparisons to alternative definitions of the north. The resulting classification of the north complements the MIZ classification. Together, census metropolitan areas, census agglomerations, MIZ and the North form a new Statistical Area Classification (SAC) for Canada.

Two related Geography working papers (catalogue no. 92F0138MPE) provide further details about the MIZ classification. Working paper no. 2000-1 (92F0138MPE00001) briefly describes MIZ and includes tables of selected socio-economic characteristics from the 1991 Census tabulated by the MIZ categories, and working paper no. 2000-2 (92F0138MPE00002) describes the methodology used to define the MIZ classification.

Release date: 2000-02-03 - 53. Comparative Study of Analytical Consumer Price Indexes for Different Subgroups of the Reference Population ArchivedArticles and reports: 62F0014M1998013Geography: CanadaDescription:
The reference population for the Consumer Price Index (CPI) has been represented, since the 1992 updating of the basket of goods and services, by families and unattached individuals living in private urban or rural households. The official CPI is a measure of the average percentage change over time in the cost of a fixed basket of goods and services purchased by Canadian consumers.

Because of the broadly defined target population of the CPI, the measure has been criticised for failing to reflect the inflationary experiences of certain socio-economic groups. This study examines this question for three sub-groups of the reference population of the CPI. It is an extension of earlier studies on the subject done at Statistics Canada.

In this document, analytical consumer price indexes sub-group indexes are compared to the analytical index for the whole population calculated at the national geographic level.

The findings tend to point to those of earlier Statistics Canada studies on sub-groups in the CPI reference population. Those studies have consistently concluded that a consumer price index established for a given sub-group does not differ substantially from the index for the whole reference population.

Release date: 1999-05-13 - 54. Inverse sampling design algorithms ArchivedSurveys and statistical programs – Documentation: 12-001-X19970013101Description:
In the main body of statistics, sampling is often disposed of by assuming a sampling process that selects random variables such that they are independent and identically distributed (IID). Important techniques, like regression and contingency table analysis, were developed largely in the IID world; hence, adjustments are needed to use them in complex survey settings. Rather than adjust the analysis, however, what is new in the present formulation is to draw a second sample from the original sample. In this second sample, the first set of selections are inverted, so as to yield at the end a simple random sample. Of course, to employ this two-step process to draw a single simple random sample from the usually much larger complex survey would be inefficient, so multiple simple random samples are drawn and a way to base inferences on them developed. Not all original samples can be inverted; but many practical special cases are discussed which cover a wide range of practices.

Release date: 1997-08-18 - Surveys and statistical programs – Documentation: 12-001-X19970013102Description:
The selection of auxiliary variables is considered for regression estimation in finite populations under a simple random sampling design. This problem is a basic one for model-based and model-assisted survey sampling approaches and is of practical importance when the number of variables available is large. An approach is developed in which a mean squared error estimator is minimised. This approach is compared to alternative approaches using a fixed set of auxiliary variables, a conventional significance test criterion, a condition number reduction approach and a ridge regression approach. The proposed approach is found to perform well in terms of efficiency. It is noted that the variable selection approach affects the properties of standard variance estimators and thus leads to a problem of variance estimation.

Release date: 1997-08-18 - 56. A transformation method for finite population sampling calibrated with empirical likelihood ArchivedSurveys and statistical programs – Documentation: 12-001-X19960022980Description:
In this paper, we study a confidence interval estimation method for a finite population average when some auxiliairy information is available. As demonstrated by Royall and Cumberland in a series of empirical studies, naive use of existing methods to construct confidence intervals for population averages may result in very poor conditional coverage probabilities, conditional on the sample mean of the covariate. When this happens, we propose to transform the data to improve the precision of the normal approximation. The transformed data are then used to make inference on the original population average, and the auxiliary information is incorporated into the inference directly, or by calibration with empirical likelihood. Our approach is design-based. We apply our approach to six real populations and find that when transformation is needed, our approach performs well compared to the usual regression method.

Release date: 1997-01-30 - Articles and reports: 91F0015M1996001Geography: CanadaDescription:
This paper describes the methodology for fertility projections used in the 1993-based population projections by age and sex for Canada, provinces and territories, 1993-2016. A new version of the parametric model known as the Pearsonian Type III curve was applied for projecting fertility age pattern. The Pearsonian Type III model is considered as an improvement over the Type I used in the past projections. This is because the Type III curve better portrays both the distribution of the age-specific fertility rates and the estimates of births. Since the 1993-based population projections are the first official projections to incorporate the net census undercoverage in the population base, it has been necessary to recalculate fertility rates based on the adjusted population estimates. This recalculation resulted in lowering the historical series of age-specific and total fertility rates, 1971-1993. The three sets of fertility assumptions and projections were developed with these adjusted annual fertility rates.

It is hoped that this paper will provide valuable information about the technical and analytical aspects of the current fertility projection model. Discussions on the current and future levels and age pattern of fertility in Canada, provinces and territories are also presented in the paper.

Release date: 1996-08-02 - 58. Multiple sample estimation of population and census undercount in the presence of matching errors ArchivedArticles and reports: 12-001-X199600114385Description:
The multiple capture-recapture census is reconsidered by relaxing the traditional perfect matching assumption. We propose matching error models to characterize error-prone matching mechanisms. The observed data take the form of an incomplete 2^k contingency table with one missing cell and follow a multinomial distribution. We develop a procedure for the estimation of the population size. Our approach applies to both standard log-linear models for contingency tables and log-linear models for heterogeneity of catchability. We illustrate the method and estimation using a 1988 dress rehearsal study for the 1990 census conducted by the U.S. Bureau of the Census.

Release date: 1996-06-14 - 59. Design effects for correlated (P_i - P_j) ArchivedArticles and reports: 12-001-X199500214398Description:
We present empirical evidence from 14 surveys in six countries concerning the existence and magnitude of design effects (defts) for five designs of two major types. The first type concerns deft (p_i – p_j), the difference of two proportions from a polytomous variable of three or more categories. The second type uses Chi-square tests for differences from two samples. We find that for all variables in all designs deft (p_i – p_j) \cong [deft (p_i) + deft (p_j)] / 2 are good approximations. These are empirical results, and exceptions disprove the existence of mere analytical inequalities. These results hold despite great variations of defts between variables and also between categories of the same variables. They also show the need for sample survey treatment of survey data even for analytical statistics. Furthermore they permit useful approximations of deft (p_i – p_j) from more accessible deft (p_i) values.

Release date: 1995-12-15 - 60. Median estimation using auxiliary information ArchivedArticles and reports: 12-001-X199500114408Description:
The problem of estimating the median of a finite population when an auxiliary variable is present is considered. Point and interval estimators based on a non-informative Bayesian approach are proposed. The point estimator is compared to other possible estimators and is seen to perform well in a variety of situations.

Release date: 1995-06-15

- Previous Go to previous page of Analysis results
- 1 Go to page 1 of Analysis results
- 2 Go to page 2 of Analysis results
- 3 Go to page 3 of Analysis results
- 4 Go to page 4 of Analysis results
- 5 Go to page 5 of Analysis results
- 6 (current) Go to page 6 of Analysis results
- 7 Go to page 7 of Analysis results
- Next Go to next page of Analysis results

## Reference (16)

## Reference (16) (0 to 10 of 16 results)

- 1. The Potential Use of Remote Sensing to Produce Field Crop Statistics at Statistics Canada ArchivedSurveys and statistical programs – Documentation: 11-522-X201300014259Description:
In an effort to reduce response burden on farm operators, Statistics Canada is studying alternative approaches to telephone surveys for producing field crop estimates. One option is to publish harvested area and yield estimates in September as is currently done, but to calculate them using models based on satellite and weather data, and data from the July telephone survey. However before adopting such an approach, a method must be found which produces estimates with a sufficient level of accuracy. Research is taking place to investigate different possibilities. Initial research results and issues to consider are discussed in this paper.

Release date: 2014-10-31 - 2. A weighted composite likelihood approach to inference for two-level models from survey data ArchivedSurveys and statistical programs – Documentation: 12-001-X201300211887Description:
Multi-level models are extensively used for analyzing survey data with the design hierarchy matching the model hierarchy. We propose a unified approach, based on a design-weighted log composite likelihood, for two-level models that leads to design-model consistent estimators of the model parameters even when the within cluster sample sizes are small provided the number of sample clusters is large. This method can handle both linear and generalized linear two-level models and it requires level 2 and level 1 inclusion probabilities and level 1 joint inclusion probabilities, where level 2 represents a cluster and level 1 an element within a cluster. Results of a simulation study demonstrating superior performance of the proposed method relative to existing methods under informative sampling are also reported.

Release date: 2014-01-15 - Surveys and statistical programs – Documentation: 12-001-X201200211758Description:
This paper develops two Bayesian methods for inference about finite population quantiles of continuous survey variables from unequal probability sampling. The first method estimates cumulative distribution functions of the continuous survey variable by fitting a number of probit penalized spline regression models on the inclusion probabilities. The finite population quantiles are then obtained by inverting the estimated distribution function. This method is quite computationally demanding. The second method predicts non-sampled values by assuming a smoothly-varying relationship between the continuous survey variable and the probability of inclusion, by modeling both the mean function and the variance function using splines. The two Bayesian spline-model-based estimators yield a desirable balance between robustness and efficiency. Simulation studies show that both methods yield smaller root mean squared errors than the sample-weighted estimator and the ratio and difference estimators described by Rao, Kovar, and Mantel (RKM 1990), and are more robust to model misspecification than the regression through the origin model-based estimator described in Chambers and Dunstan (1986). When the sample size is small, the 95% credible intervals of the two new methods have closer to nominal confidence coverage than the sample-weighted estimator.

Release date: 2012-12-19 - Surveys and statistical programs – Documentation: 12-001-X201200111688Description:
We study the problem of nonignorable nonresponse in a two dimensional contingency table which can be constructed for each of several small areas when there is both item and unit nonresponse. In general, the provision for both types of nonresponse with small areas introduces significant additional complexity in the estimation of model parameters. For this paper, we conceptualize the full data array for each area to consist of a table for complete data and three supplemental tables for missing row data, missing column data, and missing row and column data. For nonignorable nonresponse, the total cell probabilities are allowed to vary by area, cell and these three types of "missingness". The underlying cell probabilities (i.e., those which would apply if full classification were always possible) for each area are generated from a common distribution and their similarity across the areas is parametrically quantified. Our approach is an extension of the selection approach for nonignorable nonresponse investigated by Nandram and Choi (2002a, b) for binary data; this extension creates additional complexity because of the multivariate nature of the data coupled with the small area structure. As in that earlier work, the extension is an expansion model centered on an ignorable nonresponse model so that the total cell probability is dependent upon which of the categories is the response. Our investigation employs hierarchical Bayesian models and Markov chain Monte Carlo methods for posterior inference. The models and methods are illustrated with data from the third National Health and Nutrition Examination Survey.

Release date: 2012-06-27 - Surveys and statistical programs – Documentation: 12-001-X201100211603Description:
In many sample surveys there are items requesting binary response (e.g., obese, not obese) from a number of small areas. Inference is required about the probability for a positive response (e.g., obese) in each area, the probability being the same for all individuals in each area and different across areas. Because of the sparseness of the data within areas, direct estimators are not reliable, and there is a need to use data from other areas to improve inference for a specific area. Essentially, a priori the areas are assumed to be similar, and a hierarchical Bayesian model, the standard beta-binomial model, is a natural choice. The innovation is that a practitioner may have much-needed additional prior information about a linear combination of the probabilities. For example, a weighted average of the probabilities is a parameter, and information can be elicited about this parameter, thereby making the Bayesian paradigm appropriate. We have modified the standard beta-binomial model for small areas to incorporate the prior information on the linear combination of the probabilities, which we call a constraint. Thus, there are three cases. The practitioner (a) does not specify a constraint, (b) specifies a constraint and the parameter completely, and (c) specifies a constraint and information which can be used to construct a prior distribution for the parameter. The griddy Gibbs sampler is used to fit the models. To illustrate our method, we use an example on obesity of children in the National Health and Nutrition Examination Survey in which the small areas are formed by crossing school (middle, high), ethnicity (white, black, Mexican) and gender (male, female). We use a simulation study to assess some of the statistical features of our method. We have shown that the gain in precision beyond (a) is in the order with (b) larger than (c).

Release date: 2011-12-21 - Surveys and statistical programs – Documentation: 12-001-X201000111250Description:
We propose a Bayesian Penalized Spline Predictive (BPSP) estimator for a finite population proportion in an unequal probability sampling setting. This new method allows the probabilities of inclusion to be directly incorporated into the estimation of a population proportion, using a probit regression of the binary outcome on the penalized spline of the inclusion probabilities. The posterior predictive distribution of the population proportion is obtained using Gibbs sampling. The advantages of the BPSP estimator over the Hájek (HK), Generalized Regression (GR), and parametric model-based prediction estimators are demonstrated by simulation studies and a real example in tax auditing. Simulation studies show that the BPSP estimator is more efficient, and its 95% credible interval provides better confidence coverage with shorter average width than the HK and GR estimators, especially when the population proportion is close to zero or one or when the sample is small. Compared to linear model-based predictive estimators, the BPSP estimators are robust to model misspecification and influential observations in the sample.

Release date: 2010-06-29 - Surveys and statistical programs – Documentation: 12-002-X20040027035Description:
As part of the processing of the National Longitudinal Survey of Children and Youth (NLSCY) cycle 4 data, historical revisions have been made to the data of the first 3 cycles, either to correct errors or to update the data. During processing, particular attention was given to the PERSRUK (Person Identifier) and the FIELDRUK (Household Identifier). The same level of attention has not been given to the other identifiers that are included in the data base, the CHILDID (Person identifier) and the _IDHD01 (Household identifier). These identifiers have been created for the public files and can also be found in the master files by default. The PERSRUK should be used to link records between files and the FIELDRUK to determine the household when using the master files.

Release date: 2004-10-05 - 8. Survey of Financial Security - Methodology for Estimating the Value of Employer Pension Plan Benefits ArchivedSurveys and statistical programs – Documentation: 13F0026M2001003Description:
Initial results from the Survey of Financial Security (SFS), which provides information on the net worth of Canadians, were released on March 15 2001, in The daily. The survey collected information on the value of the financial and non-financial assets owned by each family unit and on the amount of their debt.

Statistics Canada is currently refining this initial estimate of net worth by adding to it an estimate of the value of benefits accrued in employer pension plans. This is an important addition to any asset and debt survey as, for many family units, it is likely to be one of the largest assets. With the aging of the population, information on pension accumulations is greatly needed to better understand the financial situation of those nearing retirement. These updated estimates of the Survey of Financial Security will be released in late fall 2001.

The process for estimating the value of employer pension plan benefits is a complex one. This document describes the methodology for estimating that value, for the following groups: a) persons who belonged to an RPP at the time of the survey (referred to as current plan members); b) persons who had previously belonged to an RPP and either left the money in the plan or transferred it to a new plan; c) persons who are receiving RPP benefits.

This methodology was proposed by Hubert Frenken and Michael Cohen. The former has many years of experience with Statistics Canada working with data on employer pension plans; the latter is a principal with the actuarial consulting firm William M. Mercer. Earlier this year, Statistics Canada carried out a public consultation on the proposed methodology. This report includes updates made as a result of feedback received from data users.

Release date: 2001-09-05 - 9. Survey of Financial Security - Estimating the Value of Employer Pension Plan Benefits - A Discussion Paper ArchivedSurveys and statistical programs – Documentation: 13F0026M2001002Description:
The Survey of Financial Security (SFS) will provide information on the net worth of Canadians. In order to do this, information was collected - in May and June 1999 - on the value of the assets and debts of each of the families or unattached individuals in the sample. The value of one particular asset is not easy to determine, or to estimate. That is the present value of the amount people have accrued in their employer pension plan. These plans are often called registered pension plans (RPP), as they must be registered with Canada Customs and Revenue Agency. Although some RPP members receive estimates of the value of their accrued benefit, in most cases plan members would not know this amount. However, it is likely to be one of the largest assets for many family units. And, as the baby boomers approach retirement, information on their pension accumulations is much needed to better understand their financial readiness for this transition.

The intent of this paper is to: present, for discussion, a methodology for estimating the present value of employer pension plan benefits for the Survey of Financial Security; and to seek feedback on the proposed methodology. This document proposes a methodology for estimating the value of employer pension plan benefits for the following groups:a) persons who belonged to an RPP at the time of the survey (referred to as current plan members); b) persons who had previously belonged to an RPP and either left the money in the plan or transferred it to a new plan; c) persons who are receiving RPP benefits.

Release date: 2001-02-07 - Surveys and statistical programs – Documentation: 11-522-X19990015642Description:
The Longitudinal Immigration Database (IMDB) links immigration and taxation administrative records into a comprehensive source of data on the labour market behaviour of the landed immigrant population in Canada. It covers the period 1980 to 1995 and will be updated annually starting with the 1996 tax year in 1999. Statistics Canada manages the database on behalf of a federal-provincial consortium led by Citizenship and Immigration Canada. The IMDB was created specifically to respond to the need for detailed and reliable data on the performance and impact of immigration policies and programs. It is the only source of data at Statistics Canada that provides a direct link between immigration policy levers and the economic performance of immigrants. The paper will examine the issues related to the development of a longitudinal database combining administrative records to support policy-relevant research and analysis. Discussion will focus specifically on the methodological, conceptual, analytical and privacy issues involved in the creation and ongoing development of this database. The paper will also touch briefly on research findings, which illustrate the policy outcome links the IMDB allows policy-makers to investigate.

Release date: 2000-03-02

- Date modified: