Inference and foundations

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Geography

1 facets displayed. 0 facets selected.

Survey or statistical program

2 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (100)

All (100) (70 to 80 of 100 results)

  • Articles and reports: 11F0019M2003199
    Geography: Canada
    Description:

    Using a nationally representative sample of establishments, we have examined whether selected alternative work practices (AWPs) tend to reduce quit rates. Overall, our analysis provides strong evidence of a negative association between these AWPs and quit rates among establishments of more than 10 employees operating in high-skill services. We also found some evidence of a negative association in low-skill services. However, the magnitude of this negative association was reduced substantially when we added an indicator of whether the workplace has a formal policy of information sharing. There was very little evidence of a negative association in manufacturing. While establishments with self-directed workgroups have lower quit rates than others, none of the bundles of work practices considered yielded a negative and statistically significant effect. We surmise that key AWPs might be more successful in reducing labour turnover in technologically complex environments than in low-skill ones.

    Release date: 2003-03-17

  • Articles and reports: 12-001-X20020026428
    Description:

    The analysis of survey data from different geographical areas where the data from each area are polychotomous can be easily performed using hierarchical Bayesian models, even if there are small cell counts in some of these areas. However, there are difficulties when the survey data have missing information in the form of non-response, especially when the characteristics of the respondents differ from the non-respondents. We use the selection approach for estimation when there are non-respondents because it permits inference for all the parameters. Specifically, we describe a hierarchical Bayesian model to analyse multinomial non-ignorable non-response data from different geographical areas; some of them can be small. For the model, we use a Dirichlet prior density for the multinomial probabilities and a beta prior density for the response probabilities. This permits a 'borrowing of strength' of the data from larger areas to improve the reliability in the estimates of the model parameters corresponding to the smaller areas. Because the joint posterior density of all the parameters is complex, inference is sampling-based and Markov chain Monte Carlo methods are used. We apply our method to provide an analysis of body mass index (BMI) data from the third National Health and Nutrition Examination Survey (NHANES III). For simplicity, the BMI is categorized into 3 natural levels, and this is done for each of 8 age-race-sex domains and 34 counties. We assess the performance of our model using the NHANES III data and simulated examples, which show our model works reasonably well.

    Release date: 2003-01-29

  • Articles and reports: 11-522-X20010016277
    Description:

    This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.

    The advent of computerized record-linkage methodology has facilitated the conduct of cohort mortality studies in which exposure data in one database are electronically linked with mortality data from another database. In this article, the impact of linkage errors on estimates of epidemiological indicators of risk, such as standardized mortality ratios and relative risk regression model parameters, is explored. It is shown that these indicators can be subject to bias and additional variability in the presence of linkage errors, with false links and non-links leading to positive and negative bias, respectively, in estimates of the standardized mortality ratio. Although linkage errors always increase the uncertainty in the estimates, bias can be effectively eliminated in the special case in which the false positive rate equals the false negative rate within homogeneous states defined by cross-classification of the covariates of interest.

    Release date: 2002-09-12

  • Surveys and statistical programs – Documentation: 13F0026M2001003
    Description:

    Initial results from the Survey of Financial Security (SFS), which provides information on the net worth of Canadians, were released on March 15 2001, in The daily. The survey collected information on the value of the financial and non-financial assets owned by each family unit and on the amount of their debt.

    Statistics Canada is currently refining this initial estimate of net worth by adding to it an estimate of the value of benefits accrued in employer pension plans. This is an important addition to any asset and debt survey as, for many family units, it is likely to be one of the largest assets. With the aging of the population, information on pension accumulations is greatly needed to better understand the financial situation of those nearing retirement. These updated estimates of the Survey of Financial Security will be released in late fall 2001.

    The process for estimating the value of employer pension plan benefits is a complex one. This document describes the methodology for estimating that value, for the following groups: a) persons who belonged to an RPP at the time of the survey (referred to as current plan members); b) persons who had previously belonged to an RPP and either left the money in the plan or transferred it to a new plan; c) persons who are receiving RPP benefits.

    This methodology was proposed by Hubert Frenken and Michael Cohen. The former has many years of experience with Statistics Canada working with data on employer pension plans; the latter is a principal with the actuarial consulting firm William M. Mercer. Earlier this year, Statistics Canada carried out a public consultation on the proposed methodology. This report includes updates made as a result of feedback received from data users.

    Release date: 2001-09-05

  • Surveys and statistical programs – Documentation: 13F0026M2001002
    Description:

    The Survey of Financial Security (SFS) will provide information on the net worth of Canadians. In order to do this, information was collected - in May and June 1999 - on the value of the assets and debts of each of the families or unattached individuals in the sample. The value of one particular asset is not easy to determine, or to estimate. That is the present value of the amount people have accrued in their employer pension plan. These plans are often called registered pension plans (RPP), as they must be registered with Canada Customs and Revenue Agency. Although some RPP members receive estimates of the value of their accrued benefit, in most cases plan members would not know this amount. However, it is likely to be one of the largest assets for many family units. And, as the baby boomers approach retirement, information on their pension accumulations is much needed to better understand their financial readiness for this transition.

    The intent of this paper is to: present, for discussion, a methodology for estimating the present value of employer pension plan benefits for the Survey of Financial Security; and to seek feedback on the proposed methodology. This document proposes a methodology for estimating the value of employer pension plan benefits for the following groups:a) persons who belonged to an RPP at the time of the survey (referred to as current plan members); b) persons who had previously belonged to an RPP and either left the money in the plan or transferred it to a new plan; c) persons who are receiving RPP benefits.

    Release date: 2001-02-07

  • Articles and reports: 89-552-M2000007
    Geography: Canada
    Description:

    This paper addresses the problem of statistical inference with ordinal variates and examines the robustness to alternative literacy measurement and scaling choices of rankings of average literacy and of estimates of the impact of literacy on individual earnings.

    Release date: 2000-06-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015642
    Description:

    The Longitudinal Immigration Database (IMDB) links immigration and taxation administrative records into a comprehensive source of data on the labour market behaviour of the landed immigrant population in Canada. It covers the period 1980 to 1995 and will be updated annually starting with the 1996 tax year in 1999. Statistics Canada manages the database on behalf of a federal-provincial consortium led by Citizenship and Immigration Canada. The IMDB was created specifically to respond to the need for detailed and reliable data on the performance and impact of immigration policies and programs. It is the only source of data at Statistics Canada that provides a direct link between immigration policy levers and the economic performance of immigrants. The paper will examine the issues related to the development of a longitudinal database combining administrative records to support policy-relevant research and analysis. Discussion will focus specifically on the methodological, conceptual, analytical and privacy issues involved in the creation and ongoing development of this database. The paper will also touch briefly on research findings, which illustrate the policy outcome links the IMDB allows policy-makers to investigate.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015650
    Description:

    The U.S. Manufacturing Plant Ownership Change Database (OCD) was constructed using plant-level data taken from the Census Bureau's Longitudinal Research Database (LRD). It contains data on all manufacturing plants that have experienced ownership change at least once during the period 1963-92. This paper reports the status of the OCD and discuss its research possibilities. For an empirical demonstration, data taken from the database are used to study the effects of ownership changes on plant closure.

    Release date: 2000-03-02

  • Articles and reports: 11-522-X19990015654
    Description:

    A meta analysis was performed to estimate the proportion of liver carcinogens, the proportion of chemicals carcinogenic at any site, and the corresponding proportion of anticarcinogens among chemicals tested in 397 long-term cancer bioassays conducted by the U.S. National Toxicology Program. Although the estimator used was negatively biased, the study provided persuasive evidence for a larger proportion of liver carcinogens (0.43,90%CI: 0.35,0.51) than was identified by the NTP (0.28). A larger proportion of chemicals carcinogenic at any site was also estimated (0.59,90%CI: 0.49,0.69) than was identified by the NTP (0.51), although this excess was not statistically significant. A larger proportion of anticarcinogens (0.66) was estimated than carcinogens (0.59). Despite the negative bias, it was estimated that 85% of the chemicals were either carcinogenic or anticarcinogenic at some site in some sex-species group. This suggests that most chemicals tested at high enough doses will cause some sort of perturbation in tumor rates.

    Release date: 2000-03-02

  • Surveys and statistical programs – Documentation: 11-522-X19990015658
    Description:

    Radon, a naturally occurring gas found at some level in most homes, is an established risk factor for human lung cancer. The U.S. National Research Council (1999) has recently completed a comprehensive evaluation of the health risks of residential exposure to radon, and developed models for projecting radon lung cancer risks in the general population. This analysis suggests that radon may play a role in the etiology of 10-15% of all lung cancer cases in the United States, although these estimates are subject to considerable uncertainty. In this article, we present a partial analysis of uncertainty and variability in estimates of lung cancer risk due to residential exposure to radon in the United States using a general framework for the analysis of uncertainty and variability that we have developed previously. Specifically, we focus on estimates of the age-specific excess relative risk (ERR) and lifetime relative risk (LRR), both of which vary substantially among individuals.

    Release date: 2000-03-02
Data (0)

Data (0) (0 results)

No content available at this time.

Analysis (92)

Analysis (92) (50 to 60 of 92 results)

  • Articles and reports: 12-002-X20050018030
    Description:

    People often wish to use survey micro-data to study whether the rate of occurrence of a particular condition in a subpopulation is the same as the rate of occurrence in the full population. This paper describes some alternatives for making inferences about such a rate difference and shows whether and how these alternatives may be implemented in three different survey software packages. The software packages illustrated - SUDAAN, WesVar and Bootvar - all can make use of bootstrap weights provided by the analyst to carry out variance estimation.

    Release date: 2005-06-23

  • Articles and reports: 12-001-X20040027753
    Description:

    Samplers often distrust model-based approaches to survey inference because of concerns about misspecification when models are applied to large samples from complex populations. We suggest that the model-based paradigm can work very successfully in survey settings, provided models are chosen that take into account the sample design and avoid strong parametric assumptions. The Horvitz-Thompson (HT) estimator is a simple design-unbiased estimator of the finite population total. From a modeling perspective, the HT estimator performs well when the ratios of the outcome values and the inclusion probabilities are exchangeable. When this assumption is not met, the HT estimator can be very inefficient. In Zheng and Little (2003, 2004) we used penalized splines (p-splines) to model smoothly - varying relationships between the outcome and the inclusion probabilities in one-stage probability proportional to size (PPS) samples. We showed that p spline model-based estimators are in general more efficient than the HT estimator, and can provide narrower confidence intervals with close to nominal confidence coverage. In this article, we extend this approach to two-stage sampling designs. We use a p-spline based mixed model that fits a nonparametric relationship between the primary sampling unit (PSU) means and a measure of PSU size, and incorporates random effects to model clustering. For variance estimation we consider the empirical Bayes model-based variance, the jackknife and balanced repeated replication (BRR) methods. Simulation studies on simulated data and samples drawn from public use microdata in the 1990 census demonstrate gains for the model-based p-spline estimator over the HT estimator and linear model-assisted estimators. Simulations also show the variance estimation methods yield confidence intervals with satisfactory confidence coverage. Interestingly, these gains can be seen for a common equal-probability design, where the first stage selection is PPS and the second stage selection probabilities are proportional to the inverse of the first stage inclusion probabilities, and the HT estimator leads to the unweighted mean. In situations that most favor the HT estimator, the model-based estimators have comparable efficiency.

    Release date: 2005-02-03

  • Articles and reports: 11-522-X20030017700
    Description:

    This paper suggests a useful framework for exploring the effects of moderate deviations from idealized conditions. It offers evaluation criteria for point estimators and interval estimators.

    Release date: 2005-01-26

  • Articles and reports: 11-522-X20030017722
    Description:

    This paper shows how to adapt design-based and model-based frameworks to the case of two-stage sampling.

    Release date: 2005-01-26

  • Articles and reports: 11-522-X20020016708
    Description:

    In this paper, we discuss the analysis of complex health survey data by using multivariate modelling techniques. Main interests are in various design-based and model-based methods that aim at accounting for the design complexities, including clustering, stratification and weighting. Methods covered include generalized linear modelling based on pseudo-likelihood and generalized estimating equations, linear mixed models estimated by restricted maximum likelihood, and hierarchical Bayes techniques using Markov Chain Monte Carlo (MCMC) methods. The methods will be compared empirically, using data from an extensive health interview and examination survey conducted in Finland in 2000 (Health 2000 Study).

    The data of the Health 2000 Study were collected using personal interviews, questionnaires and clinical examinations. A stratified two-stage cluster sampling design was used in the survey. The sampling design involved positive intra-cluster correlation for many study variables. For a closer investigation, we selected a small number of study variables from the health interview and health examination phases. In many cases, the different methods produced similar numerical results and supported similar statistical conclusions. Methods that failed to account for the design complexities sometimes led to conflicting conclusions. We also discuss the application of the methods in this paper by using standard statistical software products.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016717
    Description:

    In the United States, the National Health and Nutrition Examination Survey (NHANES) is linked to the National Health Interview Survey (NHIS) at the primary sampling unit level (the same counties, but not necessarily the same persons, are in both surveys). The NHANES examines about 5,000 persons per year, while the NHIS samples about 100,000 persons per year. In this paper, we present and develop properties of models that allow NHIS and administrative data to be used as auxiliary information for estimating quantities of interest in the NHANES. The methodology, related to Fay-Herriot (1979) small-area models and to calibration estimators in Deville and Sarndal (1992), accounts for the survey designs in the error structure.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016719
    Description:

    This study takes a look at the modelling methods used for public health data. Public health has a renewed interest in the impact of the environment on health. Ecological or contextual studies ideally investigate these relationships using public health data augmented with environmental characteristics in multilevel or hierarchical models. In these models, individual respondents in health data are the first level and community data are the second level. Most public health data use complex sample survey designs, which require analyses accounting for the clustering, nonresponse, and poststratification to obtain representative estimates of prevalence of health risk behaviours.

    This study uses the Behavioral Risk Factor Surveillance System (BRFSS), a state-specific US health risk factor surveillance system conducted by the Center for Disease Control and Prevention, which assesses health risk factors in over 200,000 adults annually. BRFSS data are now available at the metropolitan statistical area (MSA) level and provide quality health information for studies of environmental effects. MSA-level analyses combining health and environmental data are further complicated by joint requirements of the survey sample design and the multilevel analyses.

    We compare three modelling methods in a study of physical activity and selected environmental factors using BRFSS 2000 data. Each of the methods described here is a valid way to analyse complex sample survey data augmented with environmental information, although each accounts for the survey design and multilevel data structure in a different manner and is thus appropriate for slightly different research questions.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016727
    Description:

    The census data are widely used in the distribution and targeting of resources at national, regional and local levels. In the United Kingdom (UK), a population census is conducted every 10 years. As time elapses, the census data become outdated and less relevant, thus making the distribution of resources less equitable. This paper examines alternative methods in rectifying this.

    A number of small area methods have been developed for producing postcensal estimates, including the Structural Preserving Estimation technique as a result of Purcell and Kish (1980). This paper develops an alternative approach that is based on a linear mixed modelling approach to producing postcensal estimates. The validity of the methodology is tested on simulated data from the Finnish population register and the technique is applied to producing updated estimates for a number of the 1991 UK census variables.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016730
    Description:

    A wide class of models of interest in social and economic research can be represented by specifying a parametric structure for the covariances of observed variables. The availability of software, such as LISREL (Jöreskog and Sörbom 1988) and EQS (Bentler 1995), has enabled these models to be fitted to survey data in many applications. In this paper, we consider approaches to inference about such models using survey data derived by complex sampling schemes. We consider evidence of finite sample biases in parameter estimation and ways to reduce such biases (Altonji and Segal 1996) and associated issues of efficiency of estimation, standard error estimation and testing. We use longitudinal data from the British Household Panel Survey for illustration. As these data are subject to attrition, we also consider the issue of how to use nonresponse weights in the modelling.

    Release date: 2004-09-13

  • Articles and reports: 11-522-X20020016731
    Description:

    Behavioural researchers use a variety of techniques to predict respondent scores on constructs that are not directly observable. Examples of such constructs include job satisfaction, work stress, aptitude for graduate study, children's mathematical ability, etc. The techniques commonly used for modelling and predicting scores on such constructs include factor analysis, classical psychometric scaling and item response theory (IRT), and for each technique there are often several different strategies that can be used to generate individual scores. However, researchers are seldom satisfied with simply measuring these constructs. They typically use the derived scores in multiple regression, analysis of variance and numerous multivariate procedures. Though using predicted scores in this way can result in biased estimates of model parameters, not all researchers are aware of this difficulty. The paper will review the literature on this issue, with particular emphasis on IRT methods. Problems will be illustrated, some remedies suggested, and areas for further research will be identified.

    Release date: 2004-09-13
Reference (8)

Reference (8) ((8 results))

No content available at this time.

Date modified: