Inference and foundations

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Type

1 facets displayed. 1 facets selected.

Geography

1 facets displayed. 0 facets selected.

Survey or statistical program

2 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (92)

All (92) (0 to 10 of 92 results)

  • Articles and reports: 12-001-X202300200005
    Description: Population undercoverage is one of the main hurdles faced by statistical analysis with non-probability survey samples. We discuss two typical scenarios of undercoverage, namely, stochastic undercoverage and deterministic undercoverage. We argue that existing estimation methods under the positivity assumption on the propensity scores (i.e., the participation probabilities) can be directly applied to handle the scenario of stochastic undercoverage. We explore strategies for mitigating biases in estimating the mean of the target population under deterministic undercoverage. In particular, we examine a split population approach based on a convex hull formulation, and construct estimators with reduced biases. A doubly robust estimator can be constructed if a followup subsample of the reference probability survey with measurements on the study variable becomes feasible. Performances of six competing estimators are investigated through a simulation study and issues which require further investigation are briefly discussed.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200009
    Description: In this paper, we investigate how a big non-probability database can be used to improve estimates of finite population totals from a small probability sample through data integration techniques. In the situation where the study variable is observed in both data sources, Kim and Tam (2021) proposed two design-consistent estimators that can be justified through dual frame survey theory. First, we provide conditions ensuring that these estimators are more efficient than the Horvitz-Thompson estimator when the probability sample is selected using either Poisson sampling or simple random sampling without replacement. Then, we study the class of QR predictors, introduced by Särndal and Wright (1984), to handle the less common case where the non-probability database contains no study variable but auxiliary variables. We also require that the non-probability database is large and can be linked to the probability sample. We provide conditions ensuring that the QR predictor is asymptotically design-unbiased. We derive its asymptotic design variance and provide a consistent design-based variance estimator. We compare the design properties of different predictors, in the class of QR predictors, through a simulation study. This class includes a model-based predictor, a model-assisted estimator and a cosmetic estimator. In our simulation setups, the cosmetic estimator performed slightly better than the model-assisted estimator. These findings are confirmed by an application to La Poste data, which also illustrates that the properties of the cosmetic estimator are preserved irrespective of the observed non-probability sample.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202300200018
    Description: Sample surveys, as a tool for policy development and evaluation and for scientific, social and economic research, have been employed for over a century. In that time, they have primarily served as tools for collecting data for enumerative purposes. Estimation of these characteristics has been typically based on weighting and repeated sampling, or design-based, inference. However, sample data have also been used for modelling the unobservable processes that gave rise to the finite population data. This type of use has been termed analytic, and often involves integrating the sample data with data from secondary sources.

    Alternative approaches to inference in these situations, drawing inspiration from mainstream statistical modelling, have been strongly promoted. The principal focus of these alternatives has been on allowing for informative sampling. Modern survey sampling, though, is more focussed on situations where the sample data are in fact part of a more complex set of data sources all carrying relevant information about the process of interest. When an efficient modelling method such as maximum likelihood is preferred, the issue becomes one of how it should be modified to account for both complex sampling designs and multiple data sources. Here application of the Missing Information Principle provides a clear way forward.

    In this paper I review how this principle has been applied to resolve so-called “messy” data analysis issues in sampling. I also discuss a scenario that is a consequence of the rapid growth in auxiliary data sources for survey data analysis. This is where sampled records from one accessible source or register are linked to records from another less accessible source, with values of the response variable of interest drawn from this second source, and where a key output is small area estimates for the response variable for domains defined on the first source.
    Release date: 2024-01-03

  • Articles and reports: 12-001-X202200200001
    Description:

    Conceptual arguments and examples are presented suggesting that the Bayesian approach to survey inference can address the many and varied challenges of survey analysis. Bayesian models that incorporate features of the complex design can yield inferences that are relevant for the specific data set obtained, but also have good repeated-sampling properties. Examples focus on the role of auxiliary variables and sampling weights, and methods for handling nonresponse. The article offers ten top reasons for favoring the Bayesian approach to survey inference.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200200002
    Description:

    We provide a critical review and some extended discussions on theoretical and practical issues with analysis of non-probability survey samples. We attempt to present rigorous inferential frameworks and valid statistical procedures under commonly used assumptions, and address issues on the justification and verification of assumptions in practical applications. Some current methodological developments are showcased, and problems which require further investigation are mentioned. While the focus of the paper is on non-probability samples, the essential role of probability survey samples with rich and relevant information on auxiliary variables is highlighted.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200200003
    Description:

    Non-probability surveys play an increasing role in survey research. Wu’s essay ably brings together the many tools available when assuming the non-response is conditionally independent of the study variable. In this commentary, I explore how to integrate Wu’s insights in a broader framework that encompasses the case in which non-response depends on the study variable, a case that is particularly dangerous in non-probabilistic polling.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200200004
    Description:

    This discussion attempts to add to Wu’s review of inference from non-probability samples, as well as to highlighting aspects that are likely avenues for useful additional work. It concludes with a call for an organized stable of high-quality probability surveys that will be focused on providing adjustment information for non-probability surveys.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200200005
    Description:

    Strong assumptions are required to make inferences about a finite population from a nonprobability sample. Statistics from a nonprobability sample should be accompanied by evidence that the assumptions are met and that point estimates and confidence intervals are fit for use. I describe some diagnostics that can be used to assess the model assumptions, and discuss issues to consider when deciding whether to use data from a nonprobability sample.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200200006
    Description:

    Non-probability samples are deprived of the powerful design probability for randomization-based inference. This deprivation, however, encourages us to take advantage of a natural divine probability that comes with any finite population. A key metric from this perspective is the data defect correlation (ddc), which is the model-free finite-population correlation between the individual’s sample inclusion indicator and the individual’s attribute being sampled. A data generating mechanism is equivalent to a probability sampling, in terms of design effect, if and only if its corresponding ddc is of N-1/2 (stochastic) order, where N is the population size (Meng, 2018). Consequently, existing valid linear estimation methods for non-probability samples can be recast as various strategies to miniaturize the ddc down to the N-1/2 order. The quasi design-based methods accomplish this task by diminishing the variability among the N inclusion propensities via weighting. The super-population model-based approach achieves the same goal through reducing the variability of the N individual attributes by replacing them with their residuals from a regression model. The doubly robust estimators enjoy their celebrated property because a correlation is zero whenever one of the variables being correlated is constant, regardless of which one. Understanding the commonality of these methods through ddc also helps us see clearly the possibility of “double-plus robustness”: a valid estimation without relying on the full validity of either the regression model or the estimated inclusion propensity, neither of which is guaranteed because both rely on device probability. The insight generated by ddc also suggests counterbalancing sub-sampling, a strategy aimed at creating a miniature of the population out of a non-probability sample, and with favorable quality-quantity trade-off because mean-squared errors are much more sensitive to ddc than to the sample size, especially for large populations.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200200007
    Description:

    Statistical inference with non-probability survey samples is a notoriously challenging problem in statistics. We introduce two new methods of nonparametric propensity score technique for weighting in the non-probability samples. One is the information projection approach and the other is the uniform calibration in the reproducing kernel Hilbert space.

    Release date: 2022-12-15
Data (0)

Data (0) (0 results)

No content available at this time.

Analysis (92)

Analysis (92) (10 to 20 of 92 results)

  • Articles and reports: 12-001-X202200200008
    Description:

    This response contains additional remarks on a few selected issues raised by the discussants.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200200011
    Description:

    Two-phase sampling is a cost effective sampling design employed extensively in surveys. In this paper a method of most efficient linear estimation of totals in two-phase sampling is proposed, which exploits optimally auxiliary survey information. First, a best linear unbiased estimator (BLUE) of any total is formally derived in analytic form, and shown to be also a calibration estimator. Then, a proper reformulation of such a BLUE and estimation of its unknown coefficients leads to the construction of an “optimal” regression estimator, which can also be obtained through a suitable calibration procedure. A distinctive feature of such calibration is the alignment of estimates from the two phases in an one-step procedure involving the combined first-and-second phase samples. Optimal estimation is feasible for certain two-phase designs that are used often in large scale surveys. For general two-phase designs, an alternative calibration procedure gives a generalized regression estimator as an approximate optimal estimator. The proposed general approach to optimal estimation leads to the most effective use of the available auxiliary information in any two-phase survey. The advantages of this approach over existing methods of estimation in two-phase sampling are shown both theoretically and through a simulation study.

    Release date: 2022-12-15

  • Articles and reports: 12-001-X202200100004
    Description:

    When the sample size of an area is small, borrowing information from neighbors is a small area estimation technique to provide more reliable estimates. One of the famous models in small area estimation is a multinomial-Dirichlet hierarchical model for multinomial counts. Due to natural characteristics of the data, making unimodal order restriction assumption to parameter spaces is relevant. In our application, body mass index is more likely at an overweight level, which means the unimodal order restriction may be reasonable. The same unimodal order restriction for all areas may be too strong to be true for some cases. To increase flexibility, we add uncertainty to the unimodal order restriction. Each area will have similar unimodal patterns, but not the same. Since the order restriction with uncertainty increases the inference difficulty, we make comparison with the posterior summaries and approximated log-pseudo marginal likelihood.

    Release date: 2022-06-21

  • Articles and reports: 12-001-X202200100009
    Description:

    In finite population estimation, the inverse probability or Horvitz-Thompson estimator is a basic tool. Even when auxiliary information is available to model the variable of interest, it is still used to estimate the model error. Here, the inverse probability estimator is generalized by introducing a positive definite matrix. The usual inverse probability estimator is a special case of the generalized estimator, where the positive definite matrix is the identity matrix. Since calibration estimation seeks weights that are close to the inverse probability weights, it too can be generalized by seeking weights that are close to those of the generalized inverse probability estimator. Calibration is known to be optimal, in the sense that it asymptotically attains the Godambe-Joshi lower bound. That lower bound has been derived under a model where no correlation is present. This too, can be generalized to allow for correlation. With the correct choice of the positive definite matrix that generalizes the calibration estimators, this generalized lower bound can be asymptotically attained. There is often no closed-form formula for the generalized estimators. However, simple explicit examples are given here to illustrate how the generalized estimators take advantage of the correlation. This simplicity is achieved here, by assuming a correlation of one between some population units. Those simple estimators can still be useful, even if the correlation is smaller than one. Simulation results are used to compare the generalized estimators to the ordinary estimators.

    Release date: 2022-06-21

  • Articles and reports: 12-001-X202100200003
    Description:

    Calibration weighting is a statistically efficient way for handling unit nonresponse. Assuming the response (or output) model justifying the calibration-weight adjustment is correct, it is often possible to measure the variance of estimates in an asymptotically unbiased manner. One approach to variance estimation is to create jackknife replicate weights. Sometimes, however, the conventional method for computing jackknife replicate weights for calibrated analysis weights fails. In that case, an alternative method for computing jackknife replicate weights is usually available. That method is described here and then applied to a simple example.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202100200006
    Description:

    Sample-based calibration occurs when the weights of a survey are calibrated to control totals that are random, instead of representing fixed population-level totals. Control totals may be estimated from different phases of the same survey or from another survey. Under sample-based calibration, valid variance estimation requires that the error contribution due to estimating the control totals be accounted for. We propose a new variance estimation method that directly uses the replicate weights from two surveys, one survey being used to provide control totals for calibration of the other survey weights. No restrictions are set on the nature of the two replication methods and no variance-covariance estimates need to be computed, making the proposed method straightforward to implement in practice. A general description of the method for surveys with two arbitrary replication methods with different numbers of replicates is provided. It is shown that the resulting variance estimator is consistent for the asymptotic variance of the calibrated estimator, when calibration is done using regression estimation or raking. The method is illustrated in a real-world application, in which the demographic composition of two surveys needs to be harmonized to improve the comparability of the survey estimates.

    Release date: 2022-01-06

  • Articles and reports: 12-001-X202000100001
    Description:

    For several decades, national statistical agencies around the world have been using probability surveys as their preferred tool to meet information needs about a population of interest. In the last few years, there has been a wind of change and other data sources are being increasingly explored. Five key factors are behind this trend: the decline in response rates in probability surveys, the high cost of data collection, the increased burden on respondents, the desire for access to “real-time” statistics, and the proliferation of non-probability data sources. Some people have even come to believe that probability surveys could gradually disappear. In this article, we review some approaches that can reduce, or even eliminate, the use of probability surveys, all the while preserving a valid statistical inference framework. All the approaches we consider use data from a non-probability source; data from a probability survey are also used in most cases. Some of these approaches rely on the validity of model assumptions, which contrasts with approaches based on the probability sampling design. These design-based approaches are generally not as efficient; yet, they are not subject to the risk of bias due to model misspecification.

    Release date: 2020-06-30

  • Articles and reports: 12-001-X201800254956
    Description:

    In Italy, the Labor Force Survey (LFS) is conducted quarterly by the National Statistical Institute (ISTAT) to produce estimates of the labor force status of the population at different geographical levels. In particular, ISTAT provides LFS estimates of employed and unemployed counts for local Labor Market Areas (LMAs). LMAs are 611 sub-regional clusters of municipalities and are unplanned domains for which direct estimates have overly large sampling errors. This implies the need of Small Area Estimation (SAE) methods. In this paper, we develop a new area level SAE method that uses a Latent Markov Model (LMM) as linking model. In LMMs, the characteristic of interest, and its evolution in time, is represented by a latent process that follows a Markov chain, usually of first order. Therefore, areas are allowed to change their latent state across time. The proposed model is applied to quarterly data from the LFS for the period 2004 to 2014 and fitted within a hierarchical Bayesian framework using a data augmentation Gibbs sampler. Estimates are compared with those obtained by the classical Fay-Herriot model, by a time-series area level SAE model, and on the basis of data coming from the 2011 Population Census.

    Release date: 2018-12-20

  • Articles and reports: 12-001-X201800154928
    Description:

    A two-phase process was used by the Substance Abuse and Mental Health Services Administration to estimate the proportion of US adults with serious mental illness (SMI). The first phase was the annual National Survey on Drug Use and Health (NSDUH), while the second phase was a random subsample of adult respondents to the NSDUH. Respondents to the second phase of sampling were clinically evaluated for serious mental illness. A logistic prediction model was fit to this subsample with the SMI status (yes or no) determined by the second-phase instrument treated as the dependent variable and related variables collected on the NSDUH from all adults as the model’s explanatory variables. Estimates were then computed for SMI prevalence among all adults and within adult subpopulations by assigning an SMI status to each NSDUH respondent based on comparing his (her) estimated probability of having SMI to a chosen cut point on the distribution of the predicted probabilities. We investigate alternatives to this standard cut point estimator such as the probability estimator. The latter assigns an estimated probability of having SMI to each NSDUH respondent. The estimated prevalence of SMI is the weighted mean of those estimated probabilities. Using data from NSDUH and its subsample, we show that, although the probability estimator has a smaller mean squared error when estimating SMI prevalence among all adults, it has a greater tendency to be biased at the subpopulation level than the standard cut point estimator.

    Release date: 2018-06-21

  • Articles and reports: 12-001-X201700254872
    Description:

    This note discusses the theoretical foundations for the extension of the Wilson two-sided coverage interval to an estimated proportion computed from complex survey data. The interval is shown to be asymptotically equivalent to an interval derived from a logistic transformation. A mildly better version is discussed, but users may prefer constructing a one-sided interval already in the literature.

    Release date: 2017-12-21
Reference (0)

Reference (0) (0 results)

No content available at this time.

Date modified: