Frames and coverage
Filter results by
Search HelpKeyword(s)
Type
Survey or statistical program
Results
All (70)
All (70) (0 to 10 of 70 results)
- Articles and reports: 75F0002M2023001Description: This discussion paper describes the work being achieved and undertaken by Statistics Canada, in partnership with the Treasury Board of Canada Secretariat, the Department of Finance Canada and the Privy Council Office, on developing the Quality of Life Framework for Canada and related outputs, including an online Hub. This is the first paper in a series that will provide updates on the progress of work relating to the Framework.Release date: 2023-04-19
- Articles and reports: 36-28-0001202300100003Description: Quality of life and well-being research often involves survey content that is subjective in nature, for example questions pertaining to life satisfaction. Two phenomena impacting responses to self-reported life satisfaction are studied across a range of social surveys: the framing effect, where a respondent’s answer is influenced by the theme of the survey or its content; and the mode effect, where a respondent’s answer is influenced by the method in which survey data is collected (with an interviewer, through an online collection portal, etc.). The objective of this paper is to document the effect that survey collection and survey content have on Canadians’ self-reported satisfaction with their lives. The impact of these effects on life satisfaction responses is measured across three Statistics Canada survey series: the General Social Survey, the Canadian Community Health Survey, and the Canadian Social Survey.Release date: 2023-01-25
- Articles and reports: 12-001-X201900300008Description:
Dual frame surveys are useful when no single frame with adequate coverage exists. However estimators from dual frame designs require knowledge of the frame memberships of each sampled unit. When this information is not available from the frame itself, it is often collected from the respondent. When respondents provide incorrect membership information, the resulting estimators of means or totals can be biased. A method for reducing this bias, using accurate membership information obtained about a subsample of respondents, is proposed. The properties of the new estimator are examined and compared to alternative estimators. The proposed estimator is applied to the data from the motivating example, which was a recreational angler survey, using an address frame and an incomplete fishing license frame.
Release date: 2019-12-17 - 4. A modern framework: Breaking new ground ArchivedStats in brief: 11-629-X2019004Description:
This video explains the Necessity and Proportionality Framework, which assesses data sensitivity and gathering in a more integrated way while ensuring the data needs of Canadians are met.
Release date: 2019-11-26 - Surveys and statistical programs – Documentation: 98-303-XDescription:
The Coverage Technical Report will present the error included in census data that results from either persons being missed (not enumerated) or from persons being enumerated more than once by the 2016 Census. The population coverage error is one of the most important types of errors because it affects not only the accuracy of population counts, but also the accuracy of all the census data results describing the characteristics of the population universe.
Release date: 2019-11-13 - 6. Enterprise Portfolio Management ArchivedStats in brief: 11-629-X2016003Description:
Discover how the Enterprise Portfolio Management team (EPM) supports some of Canada’s largest enterprises.
Release date: 2016-06-02 - Surveys and statistical programs – Documentation: 11-522-X201700014708Description:
Statistics Canada’s Household Survey Frames (HSF) Programme provides various universe files that can be used alone or in combination to improve survey design, sampling, collection, and processing in the traditional “need to contact a household model.” Even as surveys are migrating onto these core suite of products, the HSF is starting to plan the changes to infrastructure, organisation, and linkages with other data assets in Statistics Canada that will help enable a shift to increased use of a wide variety of administrative data as input to the social statistics programme. The presentation will provide an overview of the HSF Programme, foundational concepts that will need to be implemented to expand linkage potential, and will identify strategic research being under-taken toward 2021.
Release date: 2016-03-24 - Articles and reports: 12-001-X201500114149Description:
This paper introduces a general framework for deriving the optimal inclusion probabilities for a variety of survey contexts in which disseminating survey estimates of pre-established accuracy for a multiplicity of both variables and domains of interest is required. The framework can define either standard stratified or incomplete stratified sampling designs. The optimal inclusion probabilities are obtained by minimizing costs through an algorithm that guarantees the bounding of sampling errors at the domains level, assuming that the domain membership variables are available in the sampling frame. The target variables are unknown, but can be predicted with suitable super-population models. The algorithm takes properly into account this model uncertainty. Some experiments based on real data show the empirical properties of the algorithm.
Release date: 2015-06-29 - Articles and reports: 12-001-X201400214128Description:
Users, funders and providers of official statistics want estimates that are “wider, deeper, quicker, better, cheaper” (channeling Tim Holt, former head of the UK Office for National Statistics), to which I would add “more relevant” and “less burdensome”. Since World War II, we have relied heavily on the probability sample survey as the best we could do - and that best being very good - to meet these goals for estimates of household income and unemployment, self-reported health status, time use, crime victimization, business activity, commodity flows, consumer and business expenditures, et al. Faced with secularly declining unit and item response rates and evidence of reporting error, we have responded in many ways, including the use of multiple survey modes, more sophisticated weighting and imputation methods, adaptive design, cognitive testing of survey items, and other means to maintain data quality. For statistics on the business sector, in order to reduce burden and costs, we long ago moved away from relying solely on surveys to produce needed estimates, but, to date, we have not done that for household surveys, at least not in the United States. I argue that we can and must move from a paradigm of producing the best estimates possible from a survey to that of producing the best possible estimates to meet user needs from multiple data sources. Such sources include administrative records and, increasingly, transaction and Internet-based data. I provide two examples - household income and plumbing facilities - to illustrate my thesis. I suggest ways to inculcate a culture of official statistics that focuses on the end result of relevant, timely, accurate and cost-effective statistics and treats surveys, along with other data sources, as means to that end.
Release date: 2014-12-19 - 10. Overcoverage in the 2011 Canadian Census ArchivedSurveys and statistical programs – Documentation: 11-522-X201300014269Description:
The Census Overcoverage Study (COS) is a critical post-census coverage measurement study. Its main objective is to produce estimates of the number of people erroneously enumerated, by province and territory, study the characteristics of individuals counted multiple times and identify possible reasons for the errors. The COS is based on the sampling and clerical review of groups of connected records that are built by linking the census response database to an administrative frame, and to itself. In this paper we describe the new 2011 COS methodology. This methodology has incorporated numerous improvements including a greater use of probabilistic record-linkage, the estimation of linking parameters with an Expectation-Maximization (E-M) algorithm, and the efficient use of household information to detect more overcoverage cases.
Release date: 2014-10-31
Data (0)
Data (0) (0 results)
No content available at this time.
Analysis (60)
Analysis (60) (20 to 30 of 60 results)
- Articles and reports: 12-001-X20040027756Description:
It is usually discovered in the data collection phase of a survey that some units in the sample are ineligible even if the frame information has indicated otherwise. For example, in many business surveys a nonnegligible proportion of the sampled units will have ceased trading since the latest update of the frame. This information may be fed back to the frame and used in subsequent surveys, thereby making forthcoming samples more efficient by avoiding sampling ineligible units. On the first of two survey occasions, we assume that all ineligible units in the sample (or set of samples) are detected and excluded from the frame. On the second occasion, a subsample of the eligible part is observed again. The subsample may be augmented with a fresh sample that will contain both eligible and ineligible units. We investigate what effect on survey estimation the process of feeding back information on ineligibility may have, and derive an expression for the bias that can occur as a result of feeding back. The focus is on estimation of the total using the common expansion estimator. An estimator that is nearly unbiased in the presence of feed back is obtained. This estimator relies on consistent estimates of the number of eligible and ineligible units in the population being available.
Release date: 2005-02-03 - Articles and reports: 11-522-X20030017596Description:
This paper discusses the measurement problems that affected the Demographic Analysis (DA), a coverage measurement program used for Census 2000.
Release date: 2005-01-26 - Articles and reports: 12-001-X20030026777Description:
The Accuracy and Coverage Evaluation survey was conducted to estimate the coverage in the 2000 U.S. Census. After field procedures were completed, several types of missing data had to be addressed to apply dual-system estimation. Some housing units were not interviewed. Two noninterview adjustments were devised from the same set of interviews, one for each of two points in time. In addition, the resident, match, or enumeration status of some respondents was not determined. Methods applied in the past were replaced to accommodate a tighter schedule to compute and verify the estimates. This paper presents the extent of missing data in the survey, describes the procedures applied, comparing them to past and current alternatives, and provides analytical summaries of the procedures, including comparisons of dual-system estimates of population under alternatives. Because the resulting levels of missing data were low, it appears that alternative procedures would not have affected the results substantially. However some changes in the estimates are noted.
Release date: 2004-01-27 - Articles and reports: 12-001-X20030026780Description:
Coverage errors and other coverage issues related to the population censuses are examined in the light of the recent literature. Especially, when the actual population census count of persons are matched with their corresponding post enumeration survey counts, the aggregated results in a dual record system setting can provide some coverage error statistics.
In this paper, the coverage error issues are evaluated and alternative solutions are discussed in the light of the results from the latest Population Census of Turkey. By using the Census and post enumeration survey data, regional comparison of census coverage was also made and has shown greater variability among regions. Some methodological remarks are also made on the possible improvements on the current enumeration procedures.
Release date: 2004-01-27 - Articles and reports: 12-001-X20020026431Description:
When stand-alone sampling frames that list all establishments and their measures of size are available, establishment surveys typically use the Hansen-Hurwitz (HH) PPS (probability proportional to size) estimator to estimate the volume of transactions that establishments have with populations. This paper proposes the network sampling (NS) version of the HH estimator as a potential competitor of the PPS estimator. The NS estimator depends on the population survey-generated establishment frame that lists households and their selection probabilities in a population sample survey, and the number of transactions, if any, of each household with each establishment. A statistical model is developed in this paper to compare the efficiencies of the HH and NS estimators in single-stage and two-stage establishment sample surveys assuming the stand-alone sampling frame and the population survey-generated frame are flawless in coverage and size measures.
Release date: 2003-01-29 - Articles and reports: 11-522-X20010016248Description:
This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.
The Sawmill Survey is a voluntary census of sawmills in Great Britain. It is limited to fixed mills using domestically-grown timber. Three approaches to assess the coverage of this survey are described:
(1) A sample survey of the sawmilling industry from the UK's business register, excluding businesses already sampled in the Sawmill Survey, is used to assess the undercoverage in the list of known sawmills; (2) A non-response follow-up using local knowledge of regional officers of the Forestry Commission, is used to estimate the sawmills that do not respond (mostly the smaller mills); and (3) A survey of small-scale sawmills and mobile sawmills (many of these businesses are micro-enterprises) is conducted to analyse their significance.
These three approaches are synthesized to give an estimate of the coverage of the original survey compared with the total activity identified, and to estimate the importance of micro-enterprises to the sawmilling industry in Great Britain.
Release date: 2002-09-12 - Articles and reports: 11-522-X20010016266Description:
This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.
The key measure of Census quality is the level of response achieved. In recent censuses around the world, this level has been in the high nineties percentage range. This was also true of the 1991 Census in Britain (98%). However, what was particularly noticeable about this Census was the differential response rate and the difficulty in effectively measuring this rate. The United Kingdom set up the One Number Census program in order to research and develop a more effective methodology to measure and account for under-enumeration in the 2001 Census. The key element in this process is the Census Coverage Survey - a significantly larger and redesigned post-enumeration survey.
This paper describes the planning and design of the Census Coverage Survey with particular emphasis on the implementation of the proposed field methodology. It also provides a high-level overview of the success of this survey.
Release date: 2002-09-12 - 28. Coverage issues in the Canadian Labour Force Survey ArchivedArticles and reports: 11-522-X20010016296Description:
This paper discusses in detail issues dealing with the technical aspects of designing and conducting surveys. It is intended for an audience of survey methodologists.
The Canadian Labour Force Survey (LFS) is one of Statistics Canada's most important surveys. It is a monthly survey that collects data concerning the person's labour force status, the nature of the person's work or reason for not working, and the person's demographics. The survey sample consists of approximately 52,000 households. Coverage error is a measure of data quality that is important to any survey. One of the key measures of coverage error in the LFS is the percentage difference between the Census of Population estimates and the LFS population counts; this error is called slippage. A negative value indicates that the LFS has a problem of overcoverage, while a positive value indicates the LFS has an undercoverage problem. In general, slippage is positive, thus meaning that the LFS consistently misses people who should be enumerated.
The purpose of this study was to determine why slippage is increasing and what can be done to remedy it. The study was conducted in two stages. The first stage was a historical review of the projects that have studied and tried to control slippage in the LFS, as well as the operational changes that have been implemented over time. The second stage was an analysis of factors such as vacancy rates, non-response, demographics, urban and rural status and the impact of these factors on the slippage rate.
Release date: 2002-09-12 - Articles and reports: 12-001-X20020016419Description:
Since some individuals in a population may lack telephones, telephone surveys using random digit dialling within strata may result in asymptotically biased estimators of ratios. The impact from not being able to sample the non-telephone population is examined. We take into account the propensity that a household owns a telephone, when proposing a post-stratified telephone-weighted estimator, which seems to perform better than the typical post-stratified estimator in terms of mean squared error. Such coverage propensities are estimated using the Public Use Microdata Samples, as provided by the United States Census. Non-post-stratified estimators are considered when sample sizes are small. The asymptotic mean squared error, along with its estimate based on a sample of each of the estimators is derived. Real examples are analysed using the Public Use Microdata Samples. Other forms of no-nresponse are not examined herein.
Release date: 2002-07-05 - Articles and reports: 12-001-X20010026089Description:
Telephone surveys are a convenient and efficient method of data collection. Bias may be introduced into population estimates, however, by the exclusion of nontelephone households from these surveys. Data from the U.S. Federal Communications Commission (FCC) indicates that five and a half to six percent of American households are without phone service at any given time. The bias introduced can be significant since nontelephone households may differ from telephone households in ways that are not adequately handled by poststratification. Many households, called "transients", move in and out of the telephone population during the year, sometimes due to economic reasons or relocation. The transient telephone population may be representative of the nontelephone population in general since its members have recently been in the nontelephone population.
Release date: 2002-02-28
- Previous Go to previous page of Analysis results
- 1 Go to page 1 of Analysis results
- 2 Go to page 2 of Analysis results
- 3 (current) Go to page 3 of Analysis results
- 4 Go to page 4 of Analysis results
- 5 Go to page 5 of Analysis results
- 6 Go to page 6 of Analysis results
- Next Go to next page of Analysis results
Reference (10)
Reference (10) ((10 results))
- Surveys and statistical programs – Documentation: 98-303-XDescription:
The Coverage Technical Report will present the error included in census data that results from either persons being missed (not enumerated) or from persons being enumerated more than once by the 2016 Census. The population coverage error is one of the most important types of errors because it affects not only the accuracy of population counts, but also the accuracy of all the census data results describing the characteristics of the population universe.
Release date: 2019-11-13 - Surveys and statistical programs – Documentation: 11-522-X201700014708Description:
Statistics Canada’s Household Survey Frames (HSF) Programme provides various universe files that can be used alone or in combination to improve survey design, sampling, collection, and processing in the traditional “need to contact a household model.” Even as surveys are migrating onto these core suite of products, the HSF is starting to plan the changes to infrastructure, organisation, and linkages with other data assets in Statistics Canada that will help enable a shift to increased use of a wide variety of administrative data as input to the social statistics programme. The presentation will provide an overview of the HSF Programme, foundational concepts that will need to be implemented to expand linkage potential, and will identify strategic research being under-taken toward 2021.
Release date: 2016-03-24 - 3. Overcoverage in the 2011 Canadian Census ArchivedSurveys and statistical programs – Documentation: 11-522-X201300014269Description:
The Census Overcoverage Study (COS) is a critical post-census coverage measurement study. Its main objective is to produce estimates of the number of people erroneously enumerated, by province and territory, study the characteristics of individuals counted multiple times and identify possible reasons for the errors. The COS is based on the sampling and clerical review of groups of connected records that are built by linking the census response database to an administrative frame, and to itself. In this paper we describe the new 2011 COS methodology. This methodology has incorporated numerous improvements including a greater use of probabilistic record-linkage, the estimation of linking parameters with an Expectation-Maximization (E-M) algorithm, and the efficient use of household information to detect more overcoverage cases.
Release date: 2014-10-31 - 4. Conceptual framework for Culture Statistics 2011 ArchivedSurveys and statistical programs – Documentation: 87-542-X2011001Geography: CanadaDescription:
The first issue of the series presents the Conceptual Framework for Culture Statistics 2011, a revision of the 2004 Canadian Framework for Culture Statistics.
The conceptual framework contains an official statistical definition of culture and describes a set of culture domains that can be used to measure culture from creation to use.
Release date: 2011-10-24 - Surveys and statistical programs – Documentation: 87-542-X2011002Geography: CanadaDescription:
The second issue of this series is a companion piece to the Conceptual Framework for Culture Statistics 2011, a revision to the 2004 Canadian Framework for Culture Statistics.
The guide maps the 2011 Canadian framework for culture statistics to the following Statistics Canada's standard classification systems: the North American Industry Classification System (NAICS) 2007, the North American Product Classification System (NAPCS) - Canada (Provisional Version 0.1), National Occupational Classification - Statistics (NOC-S) 2006 and Classification of Instructional Programs (CIP), Canada, 2000.
It contains explanations, definitions and examples of how the classification codes are mapped to the conceptual framework. It also contains a series of tables that contain codes, by classification system, which help illustrate the framework domains and sub-domains, and flags those codes that do not map well to the framework.
Release date: 2011-10-24 - Surveys and statistical programs – Documentation: 87-542-XGeography: CanadaDescription:
This series the Canadian Framework for Culture Statistics 2011 replaces the 2004 Canadian Framework for Culture Statistics (Catalogue 81-595-MIE2004021).
The first issue of this series presents the conceptual framework, including a definition of culture, domains and sub-domains, and criteria for their inclusion in culture. The second issue is a guide that maps the conceptual framework to selected standard classification systems. It is intended to foster a standard approach to the measurement of culture in Canada.
Release date: 2011-10-24 - Surveys and statistical programs – Documentation: 92-567-XDescription:
The Coverage Technical Report will present the error included in census data that results from persons missed by the 2006 Census or persons enumerated in error. Population coverage errors are one of the most important types of error because they affect not only the accuracy of population counts but also the accuracy of all of the census data describing characteristics of the population universe.
Release date: 2010-03-25 - Surveys and statistical programs – Documentation: 92-394-XDescription:
This report deals with coverage errors that occur when persons, households, dwellings or families are missed or enumerated in error by the census. After the 2001 Census was taken, a number of studies were carried out to estimate gross undercoverage, gross overcoverage and net undercoverage. This report presents the results of the Dwelling Classification Study, the Reverse Record Check Study, the Automated Match Study and the Collective Dwelling Study. The report first describes census universes, coverage error and census collection and processing procedures that may result in coverage error. Then it gives estimates of net undercoverage for a number of demographic characteristics. After, the technical report presents the methodology and results of each coverage study and the estimates of coverage error after describing how the results of the various studies are combined. A historical perspective completes the product.
Release date: 2004-11-25 - Surveys and statistical programs – Documentation: 92-370-XDescription:
Series description
This series includes five general reference products - the Preview of Products and Services; the Catalogue; the Dictionary; the Handbook and the Technical Reports - as well as geography reference products - GeoSuite and Reference Maps.
Product description
Technical Reports examine the quality of data from the 1996 Census, a large and complex undertaking. While considerable effort was taken to ensure high quality standards throughout each step, the results are subject to a certain degree of error. Each report looks at the collection and processing operations and presents results from data evaluation, as well as notes on historical comparability.
Technical Reports are aimed at moderate and sophisticated users but are written in a manner which could make them useful to all census data users. Most of the technical reports have been cancelled, with the exception of Age, Sex, Marital Status and Common-law Status, Coverage and Sampling and Weighting. These reports will be available as bilingual publications as well as being available in both official languages on the Internet as free products.
This report deals with coverage errors, which occured when persons, households, dwellings or families were missed by the 1996 Census or enumerated in error. Coverage errors are one of the most important types of error since they affect not only the accuracy of the counts of the various census universes but also the accuracy of all of the census data describing the characteristics of these universes. With this information, users can determine the risks involved in basing conclusions or decisions on census data.
Release date: 1999-12-14 - Surveys and statistical programs – Documentation: 5241Description: The SRGD is conducting a Global Positioning System (GPS) and digital mapping test to improve Statistic Canada's rural dwelling inventory by collecting dwelling identifiers to be used by field collection staff. In rural areas dwelling identification can be difficult where there is an absence of civic style addresses. The test is evaluating alternative methods for dwelling identification including the collection of GPS coordinates and digital photos using a mapping application and a digital tablet
- Date modified: