Frames and coverage

Skip to main content
Skip to footer

Language selection

Français

Search and menus

Search and menus

Search

Skip to filters. View results.

Results

All (70)

All (70) (10 to 20 of 70 results)

11. Alternative survey sample designs: Sampling with multiple overlapping frames Archived
Articles and reports: 12-001-X201100211608
Description:
Designs and estimators for the single frame surveys currently used by U.S. government agencies were developed in response to practical problems. Federal household surveys now face challenges of decreasing response rates and frame coverage, higher data collection costs, and increasing demand for small area statistics. Multiple frame surveys, in which independent samples are drawn from separate frames, can be used to help meet some of these challenges. Examples include combining a list frame with an area frame or using two frames to sample landline telephone households and cellular telephone households. We review point estimators and weight adjustments that can be used to analyze multiple frame surveys with standard survey software, and summarize construction of replicate weights for variance estimation. Because of their increased complexity, multiple frame surveys face some challenges not found in single frame surveys. We investigate misclassification bias in multiple frame surveys, and propose a method for correcting for this bias when misclassification probabilities are known. Finally, we discuss research that is needed on nonsampling errors with multiple frame surveys.
Release date: 2011-12-21
12. Conceptual framework for Culture Statistics 2011 Archived
Surveys and statistical programs – Documentation: 87-542-X2011001
Geography: Canada
Description:
The first issue of the series presents the Conceptual Framework for Culture Statistics 2011, a revision of the 2004 Canadian Framework for Culture Statistics.
The conceptual framework contains an official statistical definition of culture and describes a set of culture domains that can be used to measure culture from creation to use.
Release date: 2011-10-24
13. Classification Guide for the Canadian Framework for Culture Statistics 2011 Archived
Surveys and statistical programs – Documentation: 87-542-X2011002
Geography: Canada
Description:
The second issue of this series is a companion piece to the Conceptual Framework for Culture Statistics 2011, a revision to the 2004 Canadian Framework for Culture Statistics.
The guide maps the 2011 Canadian framework for culture statistics to the following Statistics Canada's standard classification systems: the North American Industry Classification System (NAICS) 2007, the North American Product Classification System (NAPCS) - Canada (Provisional Version 0.1), National Occupational Classification - Statistics (NOC-S) 2006 and Classification of Instructional Programs (CIP), Canada, 2000.
It contains explanations, definitions and examples of how the classification codes are mapped to the conceptual framework. It also contains a series of tables that contain codes, by classification system, which help illustrate the framework domains and sub-domains, and flags those codes that do not map well to the framework.
Release date: 2011-10-24
14. Canadian Framework for Culture Statistics
Surveys and statistical programs – Documentation: 87-542-X
Geography: Canada
Description:
This series the Canadian Framework for Culture Statistics 2011 replaces the 2004 Canadian Framework for Culture Statistics (Catalogue 81-595-MIE2004021).
The first issue of this series presents the conceptual framework, including a definition of culture, domains and sub-domains, and criteria for their inclusion in culture. The second issue is a guide that maps the conceptual framework to selected standard classification systems. It is intended to foster a standard approach to the measurement of culture in Canada.
Release date: 2011-10-24
15. Nonsampling errors in dual frame telephone surveys Archived
Articles and reports: 12-001-X201100111443
Description:
Dual frame telephone surveys are becoming common in the U.S. because of the incompleteness of the landline frame as people transition to cell phones. This article examines nonsampling errors in dual frame telephone surveys. Even though nonsampling errors are ignored in much of the dual frame literature, we find that under some conditions substantial biases may arise in dual frame telephone surveys due to these errors. We specifically explore biases due to nonresponse and measurement error in these telephone surveys. To reduce the bias resulting from these errors, we propose dual frame sampling and weighting methods. The compositing factor for combining the estimates from the two frames is shown to play an important role in reducing nonresponse bias.
Release date: 2011-06-29
16. 2006 Census Technical Report: Coverage
Surveys and statistical programs – Documentation: 92-567-X
Description:
The Coverage Technical Report will present the error included in census data that results from persons missed by the 2006 Census or persons enumerated in error. Population coverage errors are one of the most important types of error because they affect not only the accuracy of population counts but also the accuracy of all of the census data describing characteristics of the population universe.
Release date: 2010-03-25
17. Evaluation of the coverage of linked Canadian Community Health Survey and hospital inpatient records Archived
Articles and reports: 11-522-X200800010972
Description:
Background: Evaluation of the coverage that results from linking routinely collected administrative hospital data with survey data is an important preliminary step to undertaking analyses based on the linked file. Data and methods: To evaluate the coverage of the linkage between data from cycle 1.1 of the Canadian Community Health Survey (CCHS) and in-patient hospital data (Health Person-Oriented Information or HPOI), the number of people admitted to hospital according to HPOI was compared with the weighted estimate for CCHS respondents who were successfully linked to HPOI. Differences between HPOI and the linked and weighted CCHS estimate indicated linkage failure and/or undercoverage. Results: According to HPOI, from September 2000 through November 2001, 1,572,343 people (outside Quebec) aged 12 or older were hospitalized. Weighted estimates from the linked CCHS, adjusted for agreement to link and plausible health number, were 7.7% lower. Coverage rates were similar for males and females. Provincial rates did not differ from those for the rest of Canada, although differences were apparent for the territories. Coverage rates were significantly lower among people aged 75 or older than among those aged 12 to 74.
Release date: 2009-12-03
18. Mailing census questionnaires: Results from 2006 and plans for 2011 Archived
Articles and reports: 11-522-X200800010979
Description:
Prior to 2006, the Canadian Census of Population relied on field staff to deliver questionnaires to all dwellings in Canada. For the 2006 Census, an address frame was created to cover almost 70% of dwellings in Canada, and these questionnaires were delivered by Canada Post. For the 2011 Census, Statistics Canada aims to expand this frame further, with a target of delivering questionnaires by mail to between 80% and 85% of dwellings. Mailing questionnaires for the Census raises a number of issues, among them: ensuring returned questionnaires are counted in the right area, creating an up to date address frame that includes all new growth, and determining which areas are unsuitable for having questionnaires delivered by mail. Changes to the address frame update procedures for 2011, most notably the decision to use purely administrative data as the frame wherever possible and conduct field update exercises only where deemed necessary, provide a new set of challenges for the 2011 Census.
Release date: 2009-12-03
19. Wireless substitution in the U.S. and Canada: prevalence and impact on random-digit-dialed health surveys Archived
Articles and reports: 11-522-X200600110420
Description:
Most major survey research organizations in the United States and Canada do not include wireless telephone numbers when conducting random-digit-dialed (RDD) household telephone surveys. In this paper, we offer the most up-to-date estimates available from the U.S. National Center for Health Statistics and Statistics Canada concerning the prevalence and demographic characteristics of the wireless-only population. We then present data from the U.S. National Health Interview Survey on the health and health care access of wireless-only adults, and we examine the potential for coverage bias when health research is conducted using RDD surveys that exclude wireless telephone numbers.
Release date: 2008-03-17
20. A single frame multiplicity estimator for multiple frame surveys Archived
Articles and reports: 12-001-X200700210492
Description:
Multiple Frame Surveys were originally proposed to foster cost savings on the basis of an optimality approach. As surveys on special, rare and difficult-to-sample populations are becoming more prominent, a single list of population units to be used as a sampling frame is often unavailable in sampling practice. In recent literature multiple frame designs have been put forward in order to increase population coverage, to improve response rates and to capture differences and subgroups. Alternative approaches to multiple frame estimation have appeared, all of them relying upon the virtual partition of the set of the available overlapping frames into disjointed domains. Hence the correct classification of sampled units into the domains is required for practical applications. In this paper a multiple frame estimator is proposed using a multiplicity approach. Multiplicity estimators require less information about unit domain membership hence they are insensitive to misclassification. Moreover the proposed estimator is analytically simple so that it is easy to implement and its exact variance is given. Empirical results from an extensive simulation study comparing the multiplicity estimator with major competitors are also provided.
Release date: 2008-01-03

Data (0)

Data (0) (0 results)

No content available at this time.

Analysis (60)

Analysis (60) (30 to 40 of 60 results)

31. Population size and total estimation when sampling from incomplete list frames with heterogeneous inclusion probabilities Archived
Articles and reports: 12-001-X20000025531
Description:
Information from list and area sampling frames is combined to obtain efficient estimates of population size and totals. We consider the case where the probabilities of inclusion on the list frames are heterogeneous and are modeled as a function of covariates. We adapt and modify the methodology of Huggins (1989) and Albo (1990) for modeling auxiliary variables in capture-recapture studies using a logistic regression model. We present the results from a simulation study which compares various estimators of frame size and population totals using the logistic regression approach to modeling heterogeneous inclusion probabilities.
Release date: 2001-02-28
32. Census coverage error: A demographic evaluation Archived
Articles and reports: 12-001-X20000015177
Description:
The 1996 Canadian Census is adjusted for coverage error as estimated primarily through the Reverse Record Check (RRC). In this paper, we will show how there is a wealth of additional information from the 1996 Reverse Record Check of direct value to population estimation. Beyond its ability to estimate coverage error, it is possible to extend the Reverse Record Check classification results to obtain an alternative estimate of demographic growth - potentially decomposed by component. This added feature of the Reverse Record Check provides promise in the evaluation of estimated census coverage error as well as insight as to possible problems in the estimation of selected components in the population estimates program.
Release date: 2000-08-30
33. Estimates of the errors in classification in the Labour Force Survey and their effect on the reported unemployment rate Archived
Articles and reports: 12-001-X19980024353
Description:
This paper studies response errors in the Current Population Survey of the U.S. Bureau of the Census and assesses their impact on the unemployment rates published by the Bureau of Labour Statistics. The measurement of these error rates is obtained from reinterview data, using an extension of the Hui and Walter (1980) procedure for the evaluation of diagnostic tests. Unlike prior studies which assumed that the reconciled reinterview yields the true status, the method estimates the error rates in both interviews. Using these estimated error rates, we show that the misclassification in the original survey creates a cyclical effect on the reported estimated unemployment rates. In particular, the degress of underestimation increases when true unemployment is high. As there was insufficient data to distinguish between a model assuming that the misclassification rates are the same throughout the business cycle, and one that allows the error rates to differ in periods of low, moderate and high unemployment, our findings should be regarded as preliminary. Nonetheless, they indicated that the relationship between the models used to assess the accuracy of diagnostic tests, and those measuring misclassification rates of survey data, deserves further study.
Release date: 1999-01-14
34. Measuring Low Income and Poverty in Canada: An Update Archived
Articles and reports: 75F0002M1998013
Description:
This paper outlines the existing poverty and income measures and summarizes the recent developments of new measures.
Release date: 1998-09-30
35. Estimation in sample surveys using frames with a many-to-many structure Archived
Articles and reports: 12-001-X19980013906
Description:
In sample surveys, the units contained in the sampling frame ideally have a one-to-one correspondence with the elements in the target population under study. In many cases, however, the frame has a many-to-many structure. That is, a unit in the frame may be associated with multiple target population elements and a target population element may be associated with multiple frame units. Such was the case in a building characteristics survey in which the frame was a list of street addresses, but the target population was commercial buildings. The frame was messy because a street address corresponded either to a single building, multiple buildings, or part of a building. In this paper, we develop estimators and formulas for their variances in both simple and stratified random sampling designs when the frame has a many-to-many structure.
Release date: 1998-07-31
36. Combining multiple frames to estimate population size and totals Archived
Articles and reports: 12-001-X19980013912
Description:
Efficient estimates of population size and totals based on information from multiple list frames and an independent area frame are considered. This work is an extension of the methodology proposed by Harley (1962) which considers two general frames. A main disadvantage of list frames is that they are typically incomplete. In this paper, we propose several methods to address frame deficiencies. A joint list-area sampling design incorporates multiple frames and achieves full coverage of the target population. For each combination of frames, we present the appropriate notation, likelihood function, and parameter estimators. Results from a simulation study that compares the various properties of the proposed estimators are also presented.
Release date: 1998-07-31
37. Temporary mobility and reporting of usual residence Archived
Articles and reports: 12-001-X19980013913
Description:
Temporary mobility is hypothesized to contribute toward within-household coverage error since it may affect an individual's determination of "usual residence" - a concept commonly applied when listing persons as part of a household-based survey or census. This paper explores a typology of temporary mobility patterns and how they relate to the identification of usual residence. Temporary mobility is defined by the pattern of movement away from, but usually back to a single residence over a two-three month reference period. The typology is constructed using two dimensions: the variety of places visited and the frequency of visits made. Using data from the U.S. Living Situation Survey (LSS) conducted in 1993, four types of temporary mobility patterns are identified. In particular, two groups exhibiting patterns of repeat visit behavior were found to contain more of the types of people who tend to be missed during censuses and surveys. Log-linear modeling indicates spent away and demographic characteristics.
Release date: 1998-07-31
38. A Review of Procedures for Estimating the Net Undercount of Censuses in Canada, the United States, Britain and Australia Archived
Articles and reports: 91F0015M1998005
Geography: Canada
Description:
All countries that organize censuses have concerns about data quality and coverage error. Different methods have been developed in evaluating the quality of census data and census undercount. Some methods make use of information independent of the census itself, while some others are designed to check the internal consistency of the data. These are expensive and complicated operations.
Given that the population in each country is organized differently and that the administrative structures differ from one country to another, no universal method can be applied. In order to compare the methods and identify their strengths and gaps, Demography Division of Statistics Canada has reviewed the procedures used in four industrialized countries: the United States, the United Kingdom, Australia and, of course, Canada. It appears from this review that demographic analysis can help considerably in the identification of inconsistencies through comparisons of consecutive censuses, while micro-level record linkage and survey based procedures are essential in order to estimate the number of people omitted or counted twice in census collection. The most important conclusion from this review is that demographers and statisticians have to work together in order to evaluate the figures the accuracy of which will always remain questionable.
Release date: 1998-03-27
39. A synthetic, robust and efficient method of making small area population estimates in France Archived
Articles and reports: 12-001-X19970023620
Description:
Since France has no population registers, population censuses are the basis for its socio-demographic information system. However, between two censuses, some data must be updated, in particular at a high level of geographic detail, especially since censuses are tending, for various reasons, to be less frequent. In 1993, the Institut National de la Statistique et des Études Économiques (INSEE) set up a team whose objective was to propose a system to substantially improve the existing mechanism for making small area population estimates. Its task was twofold: to prepare an efficient and robust synthesis of the information available from different administrative sources, and to assemble a sufficient number of "good" sources. The "multi-source" system that it designed, which is reported on here, is flexible and reliable, without being overly complex.
Release date: 1998-03-12
40. Statistical process control of sampling frames Archived
Articles and reports: 12-001-X199500214391
Description:
Statistical process control can be used as a quality tool to assure the accuracy of sampling frames that are constructed periodically. Sampling frame sizes are plotted in a control chart to detect special causes of variation. Procedures to identify the appropriate time series (ARIMA) model for serially correlated observations are described. Applications of time series analysis to the construction of control charts are discussed. Data from the United States Department of Labor’s Unemployment Insurance Benefits Quality Control Program is used to illustrate the technique.
Release date: 1995-12-15

Reference (10)

Reference (10) ((10 results))

No content available at this time.

Report a problem or mistake on this page

Date modified:: 2024-04-18