Frames and coverage
Results
All (58)
All (58) (10 to 20 of 58 results)
- Articles and reports: 12-001-X200700210492Description:
Multiple Frame Surveys were originally proposed to foster cost savings on the basis of an optimality approach. As surveys on special, rare and difficult-to-sample populations are becoming more prominent, a single list of population units to be used as a sampling frame is often unavailable in sampling practice. In recent literature multiple frame designs have been put forward in order to increase population coverage, to improve response rates and to capture differences and subgroups. Alternative approaches to multiple frame estimation have appeared, all of them relying upon the virtual partition of the set of the available overlapping frames into disjointed domains. Hence the correct classification of sampled units into the domains is required for practical applications. In this paper a multiple frame estimator is proposed using a multiplicity approach. Multiplicity estimators require less information about unit domain membership hence they are insensitive to misclassification. Moreover the proposed estimator is analytically simple so that it is easy to implement and its exact variance is given. Empirical results from an extensive simulation study comparing the multiplicity estimator with major competitors are also provided.
Release date: 2008-01-03 - 12. Estimation of the coverage of the 2000 census of population in Switzerland: Methods and results ArchivedArticles and reports: 12-001-X200700210497Description:
Coverage deficiencies are estimated and analysed for the 2000 population census in Switzerland. For the undercoverage component, the estimation is based on a sample independent of the census and a match with the census. For the overcoverage component, the estimation is based on a sample drawn from the census list and a match with the rest of the census. The over- and undercoverage components are then combined to obtain an estimate of the resulting net coverage. This estimate is based on a capture-recapture model, named the dual system, combined with a synthetic model. The estimators are calculated for the full population and different subgroups, with a variance estimated by a stratified jackknife. The coverage analyses are supplemented by a study of matches between the independent sample and the census in order to determine potential errors of measurement and location in the census data.
Release date: 2008-01-03 - 13. Single frame estimation in multiple frame survey ArchivedArticles and reports: 11-522-X20050019449Description:
Literature about Multiple Frame estimation theory mainly concentrates over the Dual Frame case and it is only rarely concerned with the important practical issue of the variance estimation. By using a multiplicity approach a fixed weights Single Frame estimator for Multiple Frame Survey is proposed.
Release date: 2007-03-02 - 14. The redesign of the Dutch business register ArchivedArticles and reports: 11-522-X20050019452Description:
The redesign of the Dutch Business Register was started for both technical and statistical reasons. The major changes in the new register are the use of the new Dutch Basic Business Register as the source for legal and local units, the inclusion of administrative units in the register and a new automated algorithm to derive the statistical frame from administrative sources.
Release date: 2007-03-02 - Articles and reports: 11-522-X20050019454Geography: CanadaDescription:
The goal of the BR Redesign Project is to simplify, optimize, and harmonize its processes and methods. This paper provides an overview of the BR Redesign with emphasis on the issues that affect the methodology of business surveys.
Release date: 2007-03-02 - Articles and reports: 12-001-X20060029551Description:
To select a survey sample, it happens that one does not have a frame containing the desired collection units, but rather another frame of units linked in a certain way to the list of collection units. It can then be considered to select a sample from the available frame in order to produce an estimate for the desired target population by using the links existing between the two. This can be designated by Indirect Sampling.
Estimation for the target population surveyed by Indirect Sampling can constitute a big challenge, in particular if the links between the units of the two are not one-to-one. The problem comes especially from the difficulty to associate a selection probability, or an estimation weight, to the surveyed units of the target population. In order to solve this type of estimation problem, the Generalized Weight Share Method (GWSM) has been developed by Lavallée (1995) and Lavallée (2002). The GWSM provides an estimation weight for every surveyed unit of the target population.
This paper first describes Indirect Sampling, which constitutes the foundations of the GWSM. Second, an overview of the GWSM is given where we formulate the GWSM in a theoretical framework using matrix notation. Third, we present some properties of the GWSM such as unbiasedness and transitivity. Fourth, we consider the special case where the links between the two populations are expressed by indicator variables. Fifth, some special typical linkages are studied to assess their impact on the GWSM. Finally, we consider the problem of optimality. We obtain optimal weights in a weak sense (for specific values of the variable of interest), and conditions for which these weights are also optimal in a strong sense and independent of the variable of interest.
Release date: 2006-12-21 - Articles and reports: 11-522-X20040018752Description:
This paper outlines some possible applications of the permanent sample of households ready to respond with respect to surveying difficult-to-reach population groups.
Release date: 2005-10-27 - Articles and reports: 11-522-X20040018756Description:
This paper evaluates several approaches that have been used to construct or augment frames for a variety of Statistics Canada surveys. On the basis of these experiences, some good practices for frame construction and use are proposed.
Release date: 2005-10-27 - Articles and reports: 12-001-X20040027756Description:
It is usually discovered in the data collection phase of a survey that some units in the sample are ineligible even if the frame information has indicated otherwise. For example, in many business surveys a nonnegligible proportion of the sampled units will have ceased trading since the latest update of the frame. This information may be fed back to the frame and used in subsequent surveys, thereby making forthcoming samples more efficient by avoiding sampling ineligible units. On the first of two survey occasions, we assume that all ineligible units in the sample (or set of samples) are detected and excluded from the frame. On the second occasion, a subsample of the eligible part is observed again. The subsample may be augmented with a fresh sample that will contain both eligible and ineligible units. We investigate what effect on survey estimation the process of feeding back information on ineligibility may have, and derive an expression for the bias that can occur as a result of feeding back. The focus is on estimation of the total using the common expansion estimator. An estimator that is nearly unbiased in the presence of feed back is obtained. This estimator relies on consistent estimates of the number of eligible and ineligible units in the population being available.
Release date: 2005-02-03 - Articles and reports: 11-522-X20030017596Description:
This paper discusses the measurement problems that affected the Demographic Analysis (DA), a coverage measurement program used for Census 2000.
Release date: 2005-01-26
Data (0)
Data (0) (0 results)
No content available at this time.
Analysis (58)
Analysis (58) (10 to 20 of 58 results)
- Articles and reports: 12-001-X200700210492Description:
Multiple Frame Surveys were originally proposed to foster cost savings on the basis of an optimality approach. As surveys on special, rare and difficult-to-sample populations are becoming more prominent, a single list of population units to be used as a sampling frame is often unavailable in sampling practice. In recent literature multiple frame designs have been put forward in order to increase population coverage, to improve response rates and to capture differences and subgroups. Alternative approaches to multiple frame estimation have appeared, all of them relying upon the virtual partition of the set of the available overlapping frames into disjointed domains. Hence the correct classification of sampled units into the domains is required for practical applications. In this paper a multiple frame estimator is proposed using a multiplicity approach. Multiplicity estimators require less information about unit domain membership hence they are insensitive to misclassification. Moreover the proposed estimator is analytically simple so that it is easy to implement and its exact variance is given. Empirical results from an extensive simulation study comparing the multiplicity estimator with major competitors are also provided.
Release date: 2008-01-03 - 12. Estimation of the coverage of the 2000 census of population in Switzerland: Methods and results ArchivedArticles and reports: 12-001-X200700210497Description:
Coverage deficiencies are estimated and analysed for the 2000 population census in Switzerland. For the undercoverage component, the estimation is based on a sample independent of the census and a match with the census. For the overcoverage component, the estimation is based on a sample drawn from the census list and a match with the rest of the census. The over- and undercoverage components are then combined to obtain an estimate of the resulting net coverage. This estimate is based on a capture-recapture model, named the dual system, combined with a synthetic model. The estimators are calculated for the full population and different subgroups, with a variance estimated by a stratified jackknife. The coverage analyses are supplemented by a study of matches between the independent sample and the census in order to determine potential errors of measurement and location in the census data.
Release date: 2008-01-03 - 13. Single frame estimation in multiple frame survey ArchivedArticles and reports: 11-522-X20050019449Description:
Literature about Multiple Frame estimation theory mainly concentrates over the Dual Frame case and it is only rarely concerned with the important practical issue of the variance estimation. By using a multiplicity approach a fixed weights Single Frame estimator for Multiple Frame Survey is proposed.
Release date: 2007-03-02 - 14. The redesign of the Dutch business register ArchivedArticles and reports: 11-522-X20050019452Description:
The redesign of the Dutch Business Register was started for both technical and statistical reasons. The major changes in the new register are the use of the new Dutch Basic Business Register as the source for legal and local units, the inclusion of administrative units in the register and a new automated algorithm to derive the statistical frame from administrative sources.
Release date: 2007-03-02 - Articles and reports: 11-522-X20050019454Geography: CanadaDescription:
The goal of the BR Redesign Project is to simplify, optimize, and harmonize its processes and methods. This paper provides an overview of the BR Redesign with emphasis on the issues that affect the methodology of business surveys.
Release date: 2007-03-02 - Articles and reports: 12-001-X20060029551Description:
To select a survey sample, it happens that one does not have a frame containing the desired collection units, but rather another frame of units linked in a certain way to the list of collection units. It can then be considered to select a sample from the available frame in order to produce an estimate for the desired target population by using the links existing between the two. This can be designated by Indirect Sampling.
Estimation for the target population surveyed by Indirect Sampling can constitute a big challenge, in particular if the links between the units of the two are not one-to-one. The problem comes especially from the difficulty to associate a selection probability, or an estimation weight, to the surveyed units of the target population. In order to solve this type of estimation problem, the Generalized Weight Share Method (GWSM) has been developed by Lavallée (1995) and Lavallée (2002). The GWSM provides an estimation weight for every surveyed unit of the target population.
This paper first describes Indirect Sampling, which constitutes the foundations of the GWSM. Second, an overview of the GWSM is given where we formulate the GWSM in a theoretical framework using matrix notation. Third, we present some properties of the GWSM such as unbiasedness and transitivity. Fourth, we consider the special case where the links between the two populations are expressed by indicator variables. Fifth, some special typical linkages are studied to assess their impact on the GWSM. Finally, we consider the problem of optimality. We obtain optimal weights in a weak sense (for specific values of the variable of interest), and conditions for which these weights are also optimal in a strong sense and independent of the variable of interest.
Release date: 2006-12-21 - Articles and reports: 11-522-X20040018752Description:
This paper outlines some possible applications of the permanent sample of households ready to respond with respect to surveying difficult-to-reach population groups.
Release date: 2005-10-27 - Articles and reports: 11-522-X20040018756Description:
This paper evaluates several approaches that have been used to construct or augment frames for a variety of Statistics Canada surveys. On the basis of these experiences, some good practices for frame construction and use are proposed.
Release date: 2005-10-27 - Articles and reports: 12-001-X20040027756Description:
It is usually discovered in the data collection phase of a survey that some units in the sample are ineligible even if the frame information has indicated otherwise. For example, in many business surveys a nonnegligible proportion of the sampled units will have ceased trading since the latest update of the frame. This information may be fed back to the frame and used in subsequent surveys, thereby making forthcoming samples more efficient by avoiding sampling ineligible units. On the first of two survey occasions, we assume that all ineligible units in the sample (or set of samples) are detected and excluded from the frame. On the second occasion, a subsample of the eligible part is observed again. The subsample may be augmented with a fresh sample that will contain both eligible and ineligible units. We investigate what effect on survey estimation the process of feeding back information on ineligibility may have, and derive an expression for the bias that can occur as a result of feeding back. The focus is on estimation of the total using the common expansion estimator. An estimator that is nearly unbiased in the presence of feed back is obtained. This estimator relies on consistent estimates of the number of eligible and ineligible units in the population being available.
Release date: 2005-02-03 - Articles and reports: 11-522-X20030017596Description:
This paper discusses the measurement problems that affected the Demographic Analysis (DA), a coverage measurement program used for Census 2000.
Release date: 2005-01-26
- Previous Go to previous page of Analysis results
- 1 Go to page 1 of Analysis results
- 2 (current) Go to page 2 of Analysis results
- 3 Go to page 3 of Analysis results
- 4 Go to page 4 of Analysis results
- 5 Go to page 5 of Analysis results
- 6 Go to page 6 of Analysis results
- Next Go to next page of Analysis results
Reference (0)
Reference (0) (0 results)
No content available at this time.
- Date modified: