Science and technology

Description:

The linkages between university research and its contribution to national and regional economies are not well understood. During the summer of 1998, Statistics Canada conducted a pilot survey of intellectual property (IP) commercialization in the higher education sector to begin to measure some of the contributions. The voluntary questionnaire was sent to 81 universities and degree-granting colleges, of which 74 responded. The results show that most universities participate in a wide variety of activities including identifying, protecting, promoting and commercializing IP.

Description:

Statistics Canada is engaged in the "Information System for Science and Technology Project" to develop useful indicators of activity and a framework to tie them together into a coherent picture of science and technology (S&T) in Canada. The working papers series is used to publish results of the different initiatives conducted within this project. The data are related to the activities, linkages and outcomes of S&T. Several key areas are covered such as: innovation, technology diffusion, human resources in S&T and interrelations between different actors involved in S&T. This series also presents data tabulations taken from regular surveys on research and development (R&D) and S&T and made possible by the project.

Description:

Entry and exit are important phenomena. This paper reviews the evidence on the size of this process and its contribution to productivity and innovation. It then develops a detailed portrait of the characteristics of new firms that survive and those that fail. In doing so, it examines the type of competencies that are developed in both groups of firms. It asks which competencies are developed by new firms. In particular, it focuses on the innovative capabilities of new firms. It shows that small firms in general and entrants in particular are heterogeneous when it comes to their innovative activity. The types of innovative activity in which they are engaged vary widely. Some focus on research and development (R&D) and new products. Others focus on new technologies. Still others stress the development of human capital. In addition, this paper examines the competitive environment that new firms face and the connection between growth and innovation. It also examines the complementary skills that are employed by innovators. Finally, the paper focuses on the causes of failure in the firm population. It extends earlier work that finds that failing firms differ from surviving firms in terms of basic competencies-management, financial management and marketing capabilities.

Description:

The framework described here is intended as a basic operational instrument for systematic development of statistical information respecting the evolution of science and technology and its interactions with the society, the economy and the political system of which it is a part.

Description:

Innovation is at the heart of economic growth and development. It is through innovation that new products are brought to market, new production processes developed and organizational change realized. Given existing cross-industry variations in structure, competitiveness and maturity, it is reasonable to expect that firms in different industries will innovate for different reasons, in different ways and with different results. This report focuses on how the innovation activities of firms in three dynamic service industries are conditioned by their different environments.

Through an understanding of what competitive pressures come into play and how these pressures affect the type of innovation that is performed, Innovation in dynamic service industries goes some way in illustrating how innovation regimes differ substantially, and quite logically, from one industry to another.

This is the fifth in the series of publications on innovation and technological change in Canada. One of the earlier studies investigated the type of innovation taking place in the manufacturing sector (Baldwin and Da Pont, Innovation in Canadian manufacturing enterprises, Catalogue No. 88-513-XPB). Two others focused on advanced manufacturing technologies. The first (Baldwin and Sabourin, Technology adoption in Canadian manufacturing, Catalogue No. 88-512-XPB) outlined the intensity of use of these technologies. The second (Baldwin, Sabourin, and Rafiquzzaman, Benefits and problems associated with technology adoption, Catalogue No. 88-514-XPE) investigated the determinants of adoption. Another study (Baldwin, Innovation and intellectual property, Catalogue No. 88-515-XPE) examined how innovative firms protect their intellectual property after they have innovated.

Description:

Considerable attention has been directed at understanding the structural changes that are generating an increased need for skilled workers. These changes are perceived to be the result of developments associated with the emergence of the new knowledge economy, whose potential is often linked to the growth of new technology-based firms (NTBFs). Where are these firms to be found? Related work on changes in technology and innovativeness has been accompanied by the creation of taxonomies that classify industries as high-tech or high-knowledge, based primarily on the characteristics of large firms. There is a temptation to use these taxonomies to identify new technology-based firms only within certain sectors. This paper uses a special survey that collected data on new firms to argue that this would be unwise.

The paper investigates the limitations of existing classification schemes that might be used to classify industries as high- or low-tech, as advanced or otherwise. Characteristically unidimensional in scope, many of these taxonomies employ conceptual and operational measures that are narrow and incomplete. Consequently, previous rankings that identify sectors as high- or low-tech using these measures obscure the degree of innovativeness and human capital formation exhibited by certain industries. In a policy environment wherein emotive 'scoreboard' classifications have direct effects on resource allocation, the social costs of misclassification are potentially significant.

Using a comparative methodology, this study investigates the role that conceptualization plays in devising taxonomies of high- and low-tech industries. Far from producing definitive classifications, existing measures of technological advancement are found to be wanting when their underpinnings are examined closely. Our objective in the current analysis is to examine the limitations of standard classification schemes, particularly when applied to new small firms, and to suggest an alternative framework based on a competency-model of the firm.

Description:

This release provides data on the Research and development activities of the private nonprofit sector.

Description:

This study uses the results of the 1991 Survey of Research and Development in Canadian Industry to examine exchanges of funds between Canadian firms for R & D purposes. Through such exchanges of funds, Canadian companies form alliances that collectively constitute a network that fosters exchanges of knowledge. These networks are widely dispersed, covering the great majority of industrial activities.

Four case studies are presented. They reveal that different industries pursue different alliance strategies. R & D alliances in the information technology, business services, oil, and pulp and paper sectors are examined. The alliance strategies are diverse, encompassing vertical integration of large related firms, a collection of small companies providing services to all sectors, and industry-specific networks in which firms have their R & D performed by research institutes. Understanding R & D alliances helps shed some light on the intricacy of the national innovation system concept.

Description:

Human resources in science and technology are deemed to be important to Canada's economic growth because of the key role they play in the development and use of new technologies. To gain a better understanding of this group and its relation to industry, this paper examines its demographic structure, occupation and education profile as well as its working conditions. The analysis is based on data from the 1991 census of population. It reveals a picture of a well-educated, well-paid, middle-aged (25-44 years) professionals and managers who work full-time all year. The majority are male and have an educational specialization related to their scientific occupation. However, the correspondence between scientific education and occupation is not perfect. There are some who have a certain educational background but who work elsewhere, and there are some who work in scientific occupations without the typical educational profile. The distribution across occupations appears to be changing, with the younger generation moving towards mathematics and systems occupations and away from engineering and the natural and applied sciences. The profile of women differs from that of men in terms of their greater concentration in mathematics and systems occupations. Women in the oldest group have more varied specializations than men.

Description:

Canada has a service economy and research and development (R&D) in Canada is mainly a service sector activity. This paper examines the sectoral distribution of expenditure on R&D performance, with emphasis on the business sector in Canada and with international comparisons. The principal observation is the key role played by service industry firms in the performing and commissioning of R&D.

Description:

This table contains 5400 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada) North American Industry Classification System (NAICS) (75 items: Total all industries; Agriculture, forestry, fishing and hunting; Agriculture (except aquaculture) and support activities for crop production and animal production; Forestry, logging and support activities for forestry; ...) Country of control (3 items: Total country of control; Canada; Foreign) Sources of funds (24 items: Total sources of funds; Total Canada; Funds from Canadian business enterprise sector; Funds from research and development performing companies (Canada); ...).

Description: This table contains 9450 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada) North American Industry Classification System (NAICS) (75 items: Total all industries; Agriculture, forestry, fishing and hunting; Agriculture (except aquaculture) and support activities for crop production and animal production; Forestry, logging and support activities for forestry; ...) Country of control (3 items: Total country of control; Canada; Foreign) Field of research and development (42 items: Total in-house research and development expenditures in Canada by field of research and development; Natural sciences and engineering; Natural and formal sciences, computer sciences, and information technology and bioinformatics; Mathematics; ...).

Description:

This table contains 900 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada) North American Industry Classification System (NAICS) (75 items: Total all industries; Agriculture, forestry, fishing and hunting; Agriculture (except aquaculture) and support activities for crop production and animal production; Forestry, logging and support activities for forestry; ...) Country of control (3 items: Total country of control; Canada; Foreign) Nature of research and development (4 items: Total in-house research and development expenditures in Canada; Basic research; Applied research; Experimental development).

Description:

This table contains 1575 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada) North American Industry Classification System (NAICS) (75 items: Total all industries; Agriculture, forestry, fishing and hunting; Agriculture (except aquaculture) and support activities for crop production and animal production; Forestry, logging and support activities for forestry; ...) Research and development expenditure type units (3 items: Total in-house and outsourced research and development expenditures; In-house research and development expenditures; Outsourced research and development expenditures) Results of research and development expenditures from previous three years (7 items: Any improvements selected; Goods; Services; Methods of manufacturing or producing goods or services; ...) .

Description:

This table contains 10125 series, with data for years 2014 - 2017 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada) North American Industry Classification System (NAICS) (75 items: Total all industries; Agriculture, forestry, fishing and hunting; Agriculture (except aquaculture) and support activities for crop production and animal production; Forestry, logging and support activities for forestry; ...) Country of control (3 items: Total country of control; Canada; Foreign) Location of recipients (3 items: Total location of recipients; Within Canada; Outside Canada) Sector of recipients (15 items: Total outsourced (contracted out or granted) payments for research and development performed by other organizations; Business enterprise sector; Parent, affiliated and subsidiary companies; Other companies; ...).

Description:

This table contains 30 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada);  Country of control (3 items: Total country of control; Canada; Foreign);  Revenue groups (10 items: Total revenue groups; Less than $250,000; $250,000 to $999,999; $1,000,000 to $1,999,999; ...).

Description:

This table contains 33 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada);  Country of control (3 items: Total country of control; Canada; Foreign);  Employment size (11 items: Total employment size; 1 to 4 employees; 5 to 9 employees; 10 to 19 employees; ...).

Description:

This table contains 24 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada);  Country of control (3 items: Total country of control; Canada; Foreign);  Research and development expenditure groups (8 items: Total research and development expenditure groups; Less than $50,000; $50,000 to $99,999; $100,000 to $249,999; ...).

Description:

This table contains 30 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada);  Country of control (3 items: Total country of control; Canada; Foreign);  Revenue groups (10 items: Total revenue groups; Less than $250,000; $250,000 to $999,999; $1,000,000 to $1,999,999; ...).

Description:

This table contains 33 series, with data for years 2014 - 2015 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada);  Country of control (3 items: Total country of control; Canada; Foreign);  Employment size (11 items: Total employment size; 1 to 4 employees; 5 to 9 employees; 10 to 19 employees; ...).

Description: This infographic examines Canadian exporters in 2021 that have been funded by the federal government through Business Innovation and Growth Support (BIGS) programs. Data is presented by program, countries of export, industry and comparison highlights.

Description: This infographic focuses on product and business process innovation introduced by Canadian businesses during the 2020-2022 period, based on data from the 2022 Survey of Innovation and Business Strategy. It presents the rate of innovation among Canadian businesses, the most common obstacles to innovation reported by businesses, the prevalent types of intellectual property (IP) protection filed by innovation businesses that developed new products, and the role of government support for innovation.

Description: This paper presents a profile of Canadian women inventors who patent in Canada, based on a rigorous matching methodology and a comprehensive linked dataset that allows examination of not only patent applications, but also various demographic and business characteristics associated with inventors. Using data on patent applications from the Canadian Intellectual Property Office, linked to the Canadian Employer–Employee Dynamics Database from 2005 to 2019, this research seeks to answer the following questions: Who are the women inventors in Canada? What are their demographic characteristics? In what types of businesses do they work? How many are entrepreneurs?

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: This research study examines the economic impact of the semiconductor industry in Canada in 2020 as it relates to several economic concepts, such as sales and revenue, employment, research and development, and international trade. The study is based on a custom list of 561 firms in the industry provided by Innovation, Science and Economic Development Canada.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description: This analysis provides a first-ever snapshot of the businesses performing clean technology activities that have been funded by the federal government through Business Innovation and Growth Support (BIGS) programs.

Description: Release published in The Daily – Statistics Canada’s official release bulletin

Description:

The concordance table provides a link between data tables and the survey questions from the Survey of Innovation and Business Strategy (SIBS).

Description: This classification system was developed conjointly by the Social Sciences and Humanities Research Council of Canada (SSHRC), the Natural Sciences and Engineering Research Council of Canada (NSERC), the Canada Foundation for Innovation (CFI), the Canadian Institutes of Health Research (CIHR), and Statistics Canada which is the custodian. This shared standard classification, inspired by the Frascati Model 2015 of the Organisation for Economic Co-operation and Development (OECD), will be used by the federal granting agencies and Statistics Canada to collect and disseminate data related to research and development in Canada. The Canadian Research and Development Classification (CRDC) first official version is the 2020 version 1.0. The CRDC will be revised within 2 years of its first release and on a five-year cycle after that, with possibility of 'evergreening' for minor changes once a year to reflect the changes in the research fields. CRDC 2020 version 1.0 is composed of 3 main pieces: the type of activity or TOA (with 3 categories), the field of research or FOR (with 1663 fields at the lowest level) and socioeconomic objective or SEO (with 85 main groups at the lowest level).

Description:

Summary of the technical workshop on Estimates of Research and Development in the Higher Education Sector (HERD), held in Ottawa on October 16, 2009. Data users and experts from universities and colleges, granting councils and provincial and federal government departments proposed general and detailed recommendations for the methodology applied in estimating the HERD.

Description:

The issue of biotechnology in agriculture has generated much debate. This activity is designed to help students better understand biological systems for producing materials and their advantages over synthetic systems.

Description:

This activity looks at the different ways in which technology is used on the farm.

Description:

This report focusses on new studies that analyse information and communications technology industries, science-based industries, high-technology industries and firms, the knowledge-based economy, and knowledge workers.

Description:

Statistics Canada's annual Economic Conference provides a forum for the exchange of empirical research among business, government, research and labour communities. The conference is also a means to promote economic and socio-economic analyses while subjecting existing data to critical assessment as part of an ongoing process of statistical development and review. This year's theme was Innovation in an Evolving Economy. At the May 6-7, 2002 conference there were 12 presentations, based directly on the analysis of Science, Innovation and Electronic Information Division (SIEID) data. These presentations were given by SIEID analysts, by Statistics Canada analysts in other groups, by facilitated access researchers and by analysts using published or commissioned estimates.

Description:

The Quebec Institute of Statistics hosted a forum for Statistics Canada and provincial government experts dealing with the subject of science and technology statistics.

Description:

This paper describes the experiences, the issues and the expectations of the many different players involved in the implementation of document imaging for the Canadian Census of Agriculture.

Description:

Statistics Canada is engaged in a project "Information System for Science and Technology" which purpose is to develop useful indicators of activity and a framework to tie them together into a coherent picture of science and technology (S&T) in Canada. The Working papers series is used to publish results of the different initiatives conducted within this project. The produced data are related to the activities, linkages and outcomes of S&T. Several key areas are covered such as: innovation, technology diffusion, human resources in S&T and interrelations between different actors involved in S&T. This series also presents important data tabulations taken from regular surveys on R&D and S&T and made possible because of the existing Project.