Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Type

1 facets displayed. 0 facets selected.

Year of publication

1 facets displayed. 1 facets selected.
Sort Help
entries

Results

All (11)

All (11) (0 to 10 of 11 results)

  • Articles and reports: 12-001-X197900254834
    Description: An alternative to the direct selection of sample is suggested, which while retaining the efficiency at the same level simplifies the selection and variance estimation processes in a wide variety of situations. If n* is the largest feasible pPS sample size that can be drawn from a given population of size N, then the proposed method entails selection of m (=N - n*) units using a pPS scheme and rejecting these units from the population such that the remainder is a pPS sample of n* units; the final sample of n units is then selected as a subsample from the remainder set. This method for selecting the pPS sample can be seen as an analogue of SRS where it is well known that the “unsampled” part of the population as well as any subsample from this part are also SRS from the entire population when SRS is the procedure used. The method is very practical for situations where m is less than the actual sample size n. Moreover, the method has the additional advantage in the context of continuing surveys, e.g. Canadian Labour Force Survey (LFS), where the number of primary sampling units (PSU’s) may have to be increased (or decreased) subsequent to the initial selection of the sample. The method also has advantages in the case of sample rotation. Main features of the proposed scheme and its limitations are given. Efficiency of the method is also evaluated empirically.
    Release date: 1979-12-15

  • Articles and reports: 12-001-X197900254835
    Description: The problem considered in this paper is the estimation of various agricultural variables using a multiple frame approach. The list frame is completely contained within the area frame. The stratification for the list and area frames are based on different criteria. Overall, the multiple frame shows some gains in terms of variance over the area frame. However, a more careful analysis reveals problem areas associated with the list frame such as the method of stratification and the degeneration of list strata over time.
    Release date: 1979-12-15

  • Articles and reports: 12-001-X197900254836
    Description: This article presents the methodology and analysis of two major pretests undertaken in order to compare the effectiveness of different interviewing methods and to assess the feasibility of collecting information which would meet Victimization Survey information requirements.
    Release date: 1979-12-15

  • Articles and reports: 12-001-X197900254832
    Description:

    A Hot Deck imputation procedure is defined to be one where an incomplete response is completed by using values from one or more other records on the same file and the choice of these records varies with the record requiring imputation.

    General approaches to Hot Deck imputation are outlined, with emphasis on the interaction between the edit constraints and the imputation procedures. Distance functions can be constructed on a mixture of categorical and numeric fields, can be modified to take account of the relative importance of fields and can discriminate against less desirable donors. Matching fields may be correlated with missing fields, may be linked with missing fields by edits or may be natural stratification variables; but increasing the number of matching fields does not necessarily result in a better match. It is important to audit the imputation process and to summarize its performance.

    Hot Deck procedures should be evaluated to study the bias and reliability of the estimates, donor usage and frequency of imputation failure in terms of a variety of conditions of the data and variations of the imputation procedure. It appears that the only generally available approach to evaluation is by simulation.

    Release date: 1979-12-14

  • Articles and reports: 12-001-X197900254833
    Description:

    This paper looks at the current state of development of social statistics in Canada. Some key concepts related to statistics and social information are defined and discussed. The availability and analysis of administrative data is highlighted, along with the need for social surveys. Suggestions are made about the types of data analysis needed for the development of social decision models to meet policy requirements. Finally, an outline of priorities for future work toward the effective use of social statistics is given.

    Release date: 1979-12-14

  • Articles and reports: 12-001-X197900100001
    Description: This paper discusses the management of information within the context of the information industry and indicates some likely future trends related thereto. The information industry itself is first briefly described. Then the process used in producing information, the organizational structure required for such production, and the legislation relating to the information industry are discussed in turn. Finally, some approaches to solving the problems of the future are suggested.
    Release date: 1979-06-15

  • Articles and reports: 12-001-X197900100002
    Description: This paper includes a description of interviewer techniques and procedures used to minimize non-response, an outline of methods used to monitor and control non-response, and a discussion of how non-respondents are treated in the data processing and estimation stages of the Canadian Labour Force Survey. Recent non-response rates as well as data on the characteristics of non-respondents are also given. It is concluded that a yearly non-response rate of approximately 5 percent is probably the best that can be achieved in the Labour Force Survey.
    Release date: 1979-06-15

  • Articles and reports: 12-001-X197900100003
    Description: Two methods for estimating the correlated response variance of a survey estimator are studied by way of both theoretical comparison and empirical investigation. The variance of these estimators is discussed and the effects of outliers examined. Finally, an improved estimator is developed and evaluated.
    Release date: 1979-06-15

  • Articles and reports: 12-001-X197900100004
    Description: Let U = {1, 2, …, i, …, N} be a finite population of N identifiable units. A known “size measure” x_i is associated with unit i; i = 1, 2, ..., N. A sampling procedure for selecting a sample of size n (2 < n < N) with probability proportional to size (PPS) and without replacement (WOR) from the population is proposed. With this method, the inclusion probability is proportional to size (IPPS) for each unit in the population.
    Release date: 1979-06-15

  • Articles and reports: 12-001-X197900100005
    Description: Approximate cutoff rules for stratifying a population into a take-all and take-some universe have been given by Dalenius (1950) and Glasser (1962). They expressed the cutoff value (that value which delineates the boundary of the take-all and take-some) as a function of the mean, the sampling weight and the population variance. Their cutoff values were derived on the assumption that a single random sample of size n was to be drawn without replacement from the population of size N.

    In the present context, exact and approximate cutoff rules have been worked out for a similar situation. Rather than providing the sample size of the sample, the precision (coefficient of variation) is given. Note that in many sampling situations, the sampler is given a set of objectives in terms of reliability and not sample size. The result is particularly useful for determining the take-all - take-some boundary for samples drawn from a known population. The procedure is also extended to ratio estimation.
    Release date: 1979-06-15
Data (0)

Data (0) (0 results)

No content available at this time.

Analysis (11)

Analysis (11) (0 to 10 of 11 results)

  • Articles and reports: 12-001-X197900254834
    Description: An alternative to the direct selection of sample is suggested, which while retaining the efficiency at the same level simplifies the selection and variance estimation processes in a wide variety of situations. If n* is the largest feasible pPS sample size that can be drawn from a given population of size N, then the proposed method entails selection of m (=N - n*) units using a pPS scheme and rejecting these units from the population such that the remainder is a pPS sample of n* units; the final sample of n units is then selected as a subsample from the remainder set. This method for selecting the pPS sample can be seen as an analogue of SRS where it is well known that the “unsampled” part of the population as well as any subsample from this part are also SRS from the entire population when SRS is the procedure used. The method is very practical for situations where m is less than the actual sample size n. Moreover, the method has the additional advantage in the context of continuing surveys, e.g. Canadian Labour Force Survey (LFS), where the number of primary sampling units (PSU’s) may have to be increased (or decreased) subsequent to the initial selection of the sample. The method also has advantages in the case of sample rotation. Main features of the proposed scheme and its limitations are given. Efficiency of the method is also evaluated empirically.
    Release date: 1979-12-15

  • Articles and reports: 12-001-X197900254835
    Description: The problem considered in this paper is the estimation of various agricultural variables using a multiple frame approach. The list frame is completely contained within the area frame. The stratification for the list and area frames are based on different criteria. Overall, the multiple frame shows some gains in terms of variance over the area frame. However, a more careful analysis reveals problem areas associated with the list frame such as the method of stratification and the degeneration of list strata over time.
    Release date: 1979-12-15

  • Articles and reports: 12-001-X197900254836
    Description: This article presents the methodology and analysis of two major pretests undertaken in order to compare the effectiveness of different interviewing methods and to assess the feasibility of collecting information which would meet Victimization Survey information requirements.
    Release date: 1979-12-15

  • Articles and reports: 12-001-X197900254832
    Description:

    A Hot Deck imputation procedure is defined to be one where an incomplete response is completed by using values from one or more other records on the same file and the choice of these records varies with the record requiring imputation.

    General approaches to Hot Deck imputation are outlined, with emphasis on the interaction between the edit constraints and the imputation procedures. Distance functions can be constructed on a mixture of categorical and numeric fields, can be modified to take account of the relative importance of fields and can discriminate against less desirable donors. Matching fields may be correlated with missing fields, may be linked with missing fields by edits or may be natural stratification variables; but increasing the number of matching fields does not necessarily result in a better match. It is important to audit the imputation process and to summarize its performance.

    Hot Deck procedures should be evaluated to study the bias and reliability of the estimates, donor usage and frequency of imputation failure in terms of a variety of conditions of the data and variations of the imputation procedure. It appears that the only generally available approach to evaluation is by simulation.

    Release date: 1979-12-14

  • Articles and reports: 12-001-X197900254833
    Description:

    This paper looks at the current state of development of social statistics in Canada. Some key concepts related to statistics and social information are defined and discussed. The availability and analysis of administrative data is highlighted, along with the need for social surveys. Suggestions are made about the types of data analysis needed for the development of social decision models to meet policy requirements. Finally, an outline of priorities for future work toward the effective use of social statistics is given.

    Release date: 1979-12-14

  • Articles and reports: 12-001-X197900100001
    Description: This paper discusses the management of information within the context of the information industry and indicates some likely future trends related thereto. The information industry itself is first briefly described. Then the process used in producing information, the organizational structure required for such production, and the legislation relating to the information industry are discussed in turn. Finally, some approaches to solving the problems of the future are suggested.
    Release date: 1979-06-15

  • Articles and reports: 12-001-X197900100002
    Description: This paper includes a description of interviewer techniques and procedures used to minimize non-response, an outline of methods used to monitor and control non-response, and a discussion of how non-respondents are treated in the data processing and estimation stages of the Canadian Labour Force Survey. Recent non-response rates as well as data on the characteristics of non-respondents are also given. It is concluded that a yearly non-response rate of approximately 5 percent is probably the best that can be achieved in the Labour Force Survey.
    Release date: 1979-06-15

  • Articles and reports: 12-001-X197900100003
    Description: Two methods for estimating the correlated response variance of a survey estimator are studied by way of both theoretical comparison and empirical investigation. The variance of these estimators is discussed and the effects of outliers examined. Finally, an improved estimator is developed and evaluated.
    Release date: 1979-06-15

  • Articles and reports: 12-001-X197900100004
    Description: Let U = {1, 2, …, i, …, N} be a finite population of N identifiable units. A known “size measure” x_i is associated with unit i; i = 1, 2, ..., N. A sampling procedure for selecting a sample of size n (2 < n < N) with probability proportional to size (PPS) and without replacement (WOR) from the population is proposed. With this method, the inclusion probability is proportional to size (IPPS) for each unit in the population.
    Release date: 1979-06-15

  • Articles and reports: 12-001-X197900100005
    Description: Approximate cutoff rules for stratifying a population into a take-all and take-some universe have been given by Dalenius (1950) and Glasser (1962). They expressed the cutoff value (that value which delineates the boundary of the take-all and take-some) as a function of the mean, the sampling weight and the population variance. Their cutoff values were derived on the assumption that a single random sample of size n was to be drawn without replacement from the population of size N.

    In the present context, exact and approximate cutoff rules have been worked out for a similar situation. Rather than providing the sample size of the sample, the precision (coefficient of variation) is given. Note that in many sampling situations, the sampler is given a set of objectives in terms of reliability and not sample size. The result is particularly useful for determining the take-all - take-some boundary for samples drawn from a known population. The procedure is also extended to ratio estimation.
    Release date: 1979-06-15
Reference (0)

Reference (0) (0 results)

No content available at this time.

Date modified: