Keyword search

View results
Sort Help
entries

Results

All (25)

All (25) (0 to 10 of 25 results)

  • 1. Cities and Growth: Knowledge Spillovers in the Adoption of Advanced Manufacturing Technologies Archived
    Articles and reports: 11-622-M2008018
    Geography: Canada
    Description:

    This paper examines the presence of knowledge spillovers that affect the adoption of advanced technologies in the Canadian manufacturing sector. It examines whether plants that adopt advanced technologies are more likely to do so when there are other nearby plants that do so within a model of technology adoption.

    Release date: 2008-02-05
  • 2. Industrial Capacity Utilization Rates in Canada
    64C0013
    Description:

    Quarterly and annual estimates of capacity utilization for good producing industries (excluding farmers), historically back to 1971.

    Release date: 2005-04-01
  • 3. Impediments to Advanced Technology Adoption for Canadian Manufacturers Archived
    Articles and reports: 11F0019M2001173
    Geography: Canada
    Description:

    Using survey data, this paper investigates problems that firms in the Canadian manufacturing sector face in their decision to adopt advanced technology. The data show that while the use of advanced technology is relatively important (users account for over 80% of all shipments), it is not widespread among firms (users represent only about one-third of all establishments). One explanation lies in the fact that while advanced technologies provide a wide range of benefits, firms also face a series of problems that impede them from adopting advanced technology. These impediments fall into five groups: cost-related, institution-related, labour-related, organization-related, and information-related.

    While it might be expected that impediments would be higher for non-users than users of technologies, the opposite occurs. We posit that the reason for this is that innovation involves a learning process. Innovators and technology users face problems that they have to solve and the more innovative firms have greater problems. We test this by examining the factors that are related to whether a firm reports that it faced impediments. Our multivariate analysis reveals that impediments are reported more frequently among technology users than non-users; and more frequently among innovating firms than non-innovating ones. We conclude that the information on impediments in technology and other related surveys (innovation) should not be interpreted as impenetrable barriers that prevent technology adoption. Rather, these surveys indicate areas where successful firms face and solve problems.

    Release date: 2001-09-21
  • 4. Furniture and Fixture Industries Archived
    Table: 35-251-X
    Description:

    Data on furniture and fixture industries clearly show the tremendous expansion period affecting these industries. Several establishments have taken advantage of the favourable economic conditions and the openness of North American markets to increase their deliveries to the United States. Foreign markets have been the driving force behind the furniture and fixture industries' growth in the past decade, since large establishments generally have more resources to break into these markets.

    Release date: 2000-09-01
  • 5. Fabricated Metal Products Industries Archived
    Journals and periodicals: 41-251-X
    Geography: Canada
    Description:

    Fabricated metal products industries remain in the middle of an expansion period. The construction sector's vitality, as well as the high North-American demand for industrial products, allow metal products manufacturers to live glorious days. However, where competitiveness is concerned, there could be trouble in paradise. In the last few years, the cost of labour has been on the rise, while the value added for each paid hour has been weakening. Moreover, imports have been increasing at a higher pace than exports in the last two years.

    Release date: 2000-09-01
  • 6. Primary Metal Industries Archived
    Journals and periodicals: 41-250-X
    Description:

    Data from the Annual Survey of manufactures (ASM) is the prime source for this publication. The results of the 1997 survey are supplemented by data from sub-annual Statistics Canada surveys and major economic indicators.

    Release date: 2000-04-27
  • 7. Textile Products Industries Archived
    Journals and periodicals: 34-251-X
    Description:

    The latest issue contains the article "Performance of the textile products industries. by Yasmin Sheikh. The business climate under which the manufacturing sector has been operating has evolved particularly in the last decade. Within manufacturing, certain industries have responded better than others to the challenge brought about by advancement in technology and increased globalization. Textile products was the fastest growing industry in terms of Gross Domestic Product (GDP) from 1961 to 1987 compared to the overall economy, the manufacturing sector and closely related Primary Textile Industries. However, this industry's GDP declined sharply between 1988 and 1992. Except for 1996, the industry again experienced growth from 1993 onwards but its GDP growth index is well below its peak in 1987.

    Results of the Annual Survey of Manufacturers show that manufacturing shipments of textile products in constant 1992 dollars peaked in 1988 and have since declined. This paper reviews data from this survey for the period 1988 to 1997 to underline the changes in the size, structure and performance of this industry and how it has fared in comparison to the Primary Textiles Industry. It also highlights current developments using results of the Monthly Survey of Manufacturers.

    Release date: 2000-04-06
  • 8. Refined Petroleum and Coal Products Industries Archived
    Journals and periodicals: 45-250-X
    Description:

    The latest issue contains the article "Refined petroleum and coal products industries" by Randall Sheldrick. The Canadian economy has been on the rise for almost a decade. But, the economy suffered a modest set back in 1998 due to the effects of the Asian economic and financial market crisis. While most manufacturing industries continued to expand, resource-based industries such as refined petroleum were hard hit by a slump in commodity prices.

    This document presents an overview of the Refined Petroleum Products Industry. Most of the findings are based on the Annual Survey of Manufactures (ASM). According to this survey the total value of shipments for the industry stalled at just over $21 billion in 1997. Despite the fact that the industry tends to be cyclical in nature, demand for refined petroleum products is expected to increase steadily into the next century.

    Release date: 2000-04-06
  • 9. Beverage and Tobacco Products Industries Archived
    Journals and periodicals: 32-251-X
    Description:

    The most recent issue contains the article "The beverage industries: two markets" by Peter Zylstra.This paper presents recent developments in the Beverage Industries. Following a brief introduction, the industry is analysed in terms of the four component sub-industries, which fall into two groups: soft drinks and alcoholic beverages. The two groups constitute different overall markets. The summary of recent developments is based on results of the 1997 Annual Survey of Manufactures (ASM). Other sources are used to provide industry environment and economic backgroun.

    Release date: 2000-04-01
  • 10. Consumption of Containers and Other Packaging Supplies by the Manufacturing Industries Archived
    Table: 31-212-X
    Description:

    This publication shows expenditures, by industry, for the various types of packaging materials.

    Release date: 2000-03-03
Data (2)

Data (2) ((2 results))

  • 1. Furniture and Fixture Industries Archived
    Table: 35-251-X
    Description:

    Data on furniture and fixture industries clearly show the tremendous expansion period affecting these industries. Several establishments have taken advantage of the favourable economic conditions and the openness of North American markets to increase their deliveries to the United States. Foreign markets have been the driving force behind the furniture and fixture industries' growth in the past decade, since large establishments generally have more resources to break into these markets.

    Release date: 2000-09-01
  • 2. Consumption of Containers and Other Packaging Supplies by the Manufacturing Industries Archived
    Table: 31-212-X
    Description:

    This publication shows expenditures, by industry, for the various types of packaging materials.

    Release date: 2000-03-03
Analysis (22)

Analysis (22) (0 to 10 of 22 results)

  • 1. Cities and Growth: Knowledge Spillovers in the Adoption of Advanced Manufacturing Technologies Archived
    Articles and reports: 11-622-M2008018
    Geography: Canada
    Description:

    This paper examines the presence of knowledge spillovers that affect the adoption of advanced technologies in the Canadian manufacturing sector. It examines whether plants that adopt advanced technologies are more likely to do so when there are other nearby plants that do so within a model of technology adoption.

    Release date: 2008-02-05
  • 2. Impediments to Advanced Technology Adoption for Canadian Manufacturers Archived
    Articles and reports: 11F0019M2001173
    Geography: Canada
    Description:

    Using survey data, this paper investigates problems that firms in the Canadian manufacturing sector face in their decision to adopt advanced technology. The data show that while the use of advanced technology is relatively important (users account for over 80% of all shipments), it is not widespread among firms (users represent only about one-third of all establishments). One explanation lies in the fact that while advanced technologies provide a wide range of benefits, firms also face a series of problems that impede them from adopting advanced technology. These impediments fall into five groups: cost-related, institution-related, labour-related, organization-related, and information-related.

    While it might be expected that impediments would be higher for non-users than users of technologies, the opposite occurs. We posit that the reason for this is that innovation involves a learning process. Innovators and technology users face problems that they have to solve and the more innovative firms have greater problems. We test this by examining the factors that are related to whether a firm reports that it faced impediments. Our multivariate analysis reveals that impediments are reported more frequently among technology users than non-users; and more frequently among innovating firms than non-innovating ones. We conclude that the information on impediments in technology and other related surveys (innovation) should not be interpreted as impenetrable barriers that prevent technology adoption. Rather, these surveys indicate areas where successful firms face and solve problems.

    Release date: 2001-09-21
  • 3. Fabricated Metal Products Industries Archived
    Journals and periodicals: 41-251-X
    Geography: Canada
    Description:

    Fabricated metal products industries remain in the middle of an expansion period. The construction sector's vitality, as well as the high North-American demand for industrial products, allow metal products manufacturers to live glorious days. However, where competitiveness is concerned, there could be trouble in paradise. In the last few years, the cost of labour has been on the rise, while the value added for each paid hour has been weakening. Moreover, imports have been increasing at a higher pace than exports in the last two years.

    Release date: 2000-09-01
  • 4. Primary Metal Industries Archived
    Journals and periodicals: 41-250-X
    Description:

    Data from the Annual Survey of manufactures (ASM) is the prime source for this publication. The results of the 1997 survey are supplemented by data from sub-annual Statistics Canada surveys and major economic indicators.

    Release date: 2000-04-27
  • 5. Textile Products Industries Archived
    Journals and periodicals: 34-251-X
    Description:

    The latest issue contains the article "Performance of the textile products industries. by Yasmin Sheikh. The business climate under which the manufacturing sector has been operating has evolved particularly in the last decade. Within manufacturing, certain industries have responded better than others to the challenge brought about by advancement in technology and increased globalization. Textile products was the fastest growing industry in terms of Gross Domestic Product (GDP) from 1961 to 1987 compared to the overall economy, the manufacturing sector and closely related Primary Textile Industries. However, this industry's GDP declined sharply between 1988 and 1992. Except for 1996, the industry again experienced growth from 1993 onwards but its GDP growth index is well below its peak in 1987.

    Results of the Annual Survey of Manufacturers show that manufacturing shipments of textile products in constant 1992 dollars peaked in 1988 and have since declined. This paper reviews data from this survey for the period 1988 to 1997 to underline the changes in the size, structure and performance of this industry and how it has fared in comparison to the Primary Textiles Industry. It also highlights current developments using results of the Monthly Survey of Manufacturers.

    Release date: 2000-04-06
  • 6. Refined Petroleum and Coal Products Industries Archived
    Journals and periodicals: 45-250-X
    Description:

    The latest issue contains the article "Refined petroleum and coal products industries" by Randall Sheldrick. The Canadian economy has been on the rise for almost a decade. But, the economy suffered a modest set back in 1998 due to the effects of the Asian economic and financial market crisis. While most manufacturing industries continued to expand, resource-based industries such as refined petroleum were hard hit by a slump in commodity prices.

    This document presents an overview of the Refined Petroleum Products Industry. Most of the findings are based on the Annual Survey of Manufactures (ASM). According to this survey the total value of shipments for the industry stalled at just over $21 billion in 1997. Despite the fact that the industry tends to be cyclical in nature, demand for refined petroleum products is expected to increase steadily into the next century.

    Release date: 2000-04-06
  • 7. Beverage and Tobacco Products Industries Archived
    Journals and periodicals: 32-251-X
    Description:

    The most recent issue contains the article "The beverage industries: two markets" by Peter Zylstra.This paper presents recent developments in the Beverage Industries. Following a brief introduction, the industry is analysed in terms of the four component sub-industries, which fall into two groups: soft drinks and alcoholic beverages. The two groups constitute different overall markets. The summary of recent developments is based on results of the 1997 Annual Survey of Manufactures (ASM). Other sources are used to provide industry environment and economic backgroun.

    Release date: 2000-04-01
  • 8. Primary Textile Industries Archived
    Journals and periodicals: 34-250-X
    Geography: Canada
    Description:

    In recent years, several economic forces have caused a change in the structure of the economy. Factors such as globalization and trade liberalization, among others, have intensified competition resulting in reallocation of resources among sectors in Canada. As business services, communications and wholesale trade emerged as engines of growth, it is generally perceived that the manufacturing industry has lost its significance. In contrast, a review of historical data on the Gross Domestic Product (GDP) show that the share of manufacturing output was slightly up, from 17.2% in 1961 to 17.8% in 1998.

    This paper reflects upon the importance of manufacturing in the economy and focuses on one industry - Primary Textiles. It concentrates on the evolution and significance of this industry within an overall changing economic structure using Statistics Canada's data base, CANSIM, results of the Annual Survey of Manufactures (1988 to 1997) along with current findings of the Monthly Survey of Manufacturing (1998 and 1999).

    Release date: 2000-02-18
  • 9. Electrical and Electronic Products Industries Archived
    Journals and periodicals: 43-250-X
    Geography: Canada
    Description:

    The latest issue consists of the article "Strong growth propels the electrical and electronic products industry into the 21st century" by Russell Kowaluk. Despite the recent turmoil in global stock markets, manufacturing in Canada is finally reaping the benefits of prosperity on many accounts, and such positive indicators are prevalent in one of Canada's more innovative, and dynamic industries, the electrical and electronic products industry (Major Group 33). Following a brief pause in 1996, the value of shipments surpassed the $30 billion mark in 1997. Employment levels recorded their strongest growth in ten years, while international trade estimates again achieved record highs.

    This review paper highlights the results of the 1997 Annual Survey of Manufactures (ASM), and details various prevailing economic indicators, illustrating the growth in the electrical and electronic products industry. These factors will be highlighted and analyzed, and the electrical and electronic products sector will be compared to other industries and measured relative to the manufacturing sector as a whole. Key current indicators to be investigated include the value of shipments and costs of production, international trade and labor statistics.

    Release date: 2000-02-18
  • 10. Machinery Industries, Except Electrical Machinery Archived
    Journals and periodicals: 42-250-X
    Description:

    The most recent issue contains "Non-Electrical machinery industries post strong growth in 1997, with market uncertainty on the horizon" by Russell Kowaluk. Based on statistical information provided by the Annual Survey of Manufactures (ASM), this article explores the machinery industries (except electrical machinery), discussing various key statistics including shipment value, input costs and labour information. Other significant economic indicators to be assessed include monthly manufacturing estimates, international trade statistics, and rates of capacity utilization and investment.

    Canada's machinery industries remained one of the fastest growing manufacturing sectors in 1997. However, during the later half of 1998 and into 1999, recent developments confirm that the tide of prosperity the industry has benefited from in recent years has tapered off. The ensuing article discusses the industry, detailing the results of the 1997 ASM, and highlighting the economic climate now challenging the sector.

    Release date: 2000-02-04
Reference (0)

Reference (0) (0 results)

No content available at this time.

Report a problem or mistake on this page
Date modified:

Search help

How do I use the filters and the search box?

  • You can initiate a search by entering keywords or selecting filters (e.g., under Subject, Geography, etc.) on the left side of the page.

  • Filters can be used together or in any combination. Each time you select a filter, the results on the page are updated.

  • To start a new search, click on the Clear all button above the search box or deselect each filter.

  • Specified keywords and filters appear above the search box. You can deselect any or all the tags to refine or clear your search.

How do I refine my search?

  • You can enter keywords in the search box. It is not necessary to use “+” or “, “ or “AND”.

  • You can delete some or all of the keywords from your search string.

  • Quotes around keywords limit the search to a specific phrase.

    • For example, “labour force survey” will limit results to products containing this phrase.

  • Use “or” between keywords to obtain results that contain one or more search terms.

    • For example, labour or­ force or survey will limit results to products containing any or all of these words.

How does the search work?

  • This search looks for results that have your query term in the title, description, subject, geography, product number or other information about the product.

    • For example, when searching the term ‘Diseases’, all results with the word ‘Diseases’ in the title, description or tagged the subject appear.

  • The text within an article or publication are not searched. For full text searching of articles, use the site search.

Sort help

How are the results ordered?

The Sort by feature provides three options:

  • By date – sorts results by product release date starting with the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.

Sort help

How are the results ordered?

The Sort by feature provides four options:

  • By date – sorts results by product release date starting with the most recent.
  • By most popular – gives priority to results that are most frequently selected by users, followed by the most recent.
  • By relevance is only needed or beneficial when you use the search box and submit a search query. Results are ordered by a combination of where the search term appears in the content, e.g., if it appears in the title, it likely means the product is more relevant to your search; how up to date or new the content in the product is; how popular the product is; and other factors.
  • By title – sorts results alphabetically.