Keyword search

Description:

The objective of this study was to determine if the prevalence of overweight and obesity is associated with neighbourhood walkability. The analysis tested whether a dose-response relationship between the Street Smart Walk Score® and various measures of physical activity, overweight, and obesity existed in a large, population-based sample of adults in urban and suburban Ontario.

Description:

Discrepancies between self-reported and objectively measured physical activity are well-known. For the purpose of validation, this study compares a new self-reported physical activity questionnaire with an existing one and with accelerometer data.

Description:

The 2012/2013 Canadian Health Measures Survey collected audiometric and self-reported data to estimate the prevalence of hearing loss and limitations in a population-based sample of Canadians. This study presents an analysis of CHMS audiometric and self-reported hearing data for adults aged 20 to 79.

Description:

This overview document describes the conceptual underpinnings of the Integrated Business Statistics Program and explains how program components facilitate a more integrated approach to economic surveying at Statistics Canada.

Description:

The Cancer Risk Management Model incorporates the risk of developing cancer, disease screening and clinical management with cost and labour data to assess health outcomes and economic impact. A screening module added to the lung cancer module enables a variety of scenarios to be evaluated for different target populations with varying rates of participation, compliance, and frequency of low-dose computed tomography screening.

Description:

Estimates of the underground economy by province and territory for the period 2007 to 2012 are now available for the first time. The objective of this technical note is to explain how the methodology employed to derive upper-bound estimates of the underground economy for the provinces and territories differs from that used to derive national estimates.

Description:

This new dataset increases the information available for comparing the performance of provinces and territories across a range of measures. It combines often fragmented provincial time series data that, as such, are of limited utility for examining the evolution of provincial economies over extended periods. More advanced statistical methods, and models with greater breadth and depth, are difficult to apply to existing fragmented Canadian data. The longitudinal nature of the new provincial dataset remedies this shortcoming. This report explains the construction of the latest vintage of the dataset. The dataset contains the most up-to-date information available.

Description:

This paper introduces and explains modifications made to the Labour Force Survey estimates in January 2015. Some of these modifications include the adjustment of all LFS estimates to reflect population counts based on the 2011 Census and includes updates to 2011 Geography classification system.

Description:

Using data from the Provincial KLEMS database, this paper asks whether provincial economies have undergone structural change in their business sectors since 2000. It does so by applying a measure of industrial change (the dissimilarity index) using measures of output (real GDP) and hours worked. The paper also develops a statistical methodology to test whether the shifts in the industrial composition of output and hours worked over the period are due to random year-over-year changes in industrial structure or long-term systematic change in the structure of provincial economies. The paper is designed to inform discussion and analysis of recent changes in industrial composition at the national level, notably, the decline in manufacturing output and the concomitant rise of resource industries, and the implications of this change for provincial economies.

Description:

The migration data are released annually from a modelled databank that monitors and tracks the movements of people to and within Canada. Data are derived from the comparison of two consecutive years of tax files. Most current data show migration between 2011 and 2012.

Data on international migration and internal migration are generally available 15 to 18 months after the tax filing deadline.

The data consist of estimates of migration flows between census divisions (CDs) or census metropolitan areas (CMAs), by sex and broad age groups. Information may be requested by province of origin/destination, by age group, by type of migration (interprovincial, intraprovincial and international) and sex; and for migration flows by census division of origin/destination, or by census metropolitan area/non-census metropolitan area of origin/destination. The statistics are derived from the annual tax file provided by the Canada Revenue Agency.

Note: Intraprovincial migration: movement of people between two CDs or CMAs located within the same province. The CD/CMA of departure is the CD/CMA of origin and the CD/CMA of arrival is the CD/CMA of destination. Interprovincial migration: movement of people between CDs and CMAs located in two different provinces. The province of departure is the province of origin and the province of arrival is the province of destination. International migration: movement of people between an area in Canada and another country. Migration flows: migration flows for any given CD or CMA. The flows are listed in descending order of net migration for the most recent year of migration.

Description:

The first in this series is the Consulting Engineering Services Price Index (CEPI) which is an annual index that measures changes in the prices for services provided by consulting engineers. These services encompass advisory and design work as well as construction or project management. They are provided for many types of projects (fields of specialization), and to both Canadian and foreign clients. Price indexes are published for 10 fields of specialization as well as for national, regional, and foreign markets.

Description:

The National Population Health Survey (NPHS) is designed to enhance the understanding of the processes affecting health. The survey collects cross-sectional as well as longitudinal data. In 1994/95 the survey interviewed a panel of 17,276 individuals, then returned to interview them a second time in 1996/97. The response rate for these individuals was 96% in 1996/97. Data collection from the panel will continue for up to two decades. For cross-sectional purposes, data were collected for a total of 81,000 household residents in all provinces (except people on Indian reserves or on Canadian Forces bases) in 1996/97.

This overview illustrates the variety of information available by presenting data on perceived health, chronic conditions, injuries, repetitive strains, depression, smoking, alcohol consumption, physical activity, consultations with medical professionals, use of medications and use of alternative medicine.

Description:

Documentation to accompany public-use microdata files. Contains a detailed description of the survey design, content and methods, as well as the record layout and the data dictionary.

Description:

Cycle 10 collected data from persons 15 years and older and concentrated on the respondent's family. Topics covered include marital history, common- law unions, biological, adopted and step children, family origins, child leaving and fertility intentions.

The target population of the GSS (General Social Survey) consisted of all individuals aged 15 and over living in a private household in one of the ten provinces.

Description:

While there are many studies on differences in earnings between immigrants and the native-born or among immigrant groups, they ignore the distribution and concentration of income. These aspects are important for understanding the distribution of economic welfare and consumer behaviour among members and hence are policy relevant.

Using the 1991 Census data, the distribution and concentration of income have been examined among 15 broad birthplace groups for population aged 55 years and over. About 19% of males and 15% of females receive less than half the median income and obtain 5% and 3% of the aggregate income respectively. About 30% of males and 29% of females receive more than one and half times the median income and obtain 61% and59% of aggregate income respectively. About 51% of males and 56% of females who receive incomes between half and one and half times the median income are termed middle-class and their shares of aggregate income amount to 34 and 38% respectively.

Although, older immigrants aged 55 years and over, as a group, have roughly the same quartile distribution and concentration of income as their Canadian-born counterparts, the birthplace groups differ from each other. The groups coming from the developing regions, that is, the very groups that have lower average annual incomes, also have more inequitable distribution of income than the Canadian-born or their counterparts from the developed regions. Thus, the income distribution is more polarized in the populations from developing regions than in the populations from developed regions or in the Canadian-born population. On average, females receive 45% less income than males, and there is less polarization of income among them than among males regardless of the place of birth. A part of the explanation lies in the receipt of government transfers which tend to equalize rather than polarize incomes, and older women derive higher proportion of their income from government transfers than older men.

Description:

New firms are seen to play a key role in the innovation process, especially in certain key sectors of the economy. This study therefore examines the differences in the profiles of successful new firms in science-based industries and other industries. The firms that are examined are entrants who survey into their early teen years. The study examines numerous factors that are seen to influence the success of new businesses. These include the competitive environment, business strategies and the financial structure of the businesses.

Successful new firms in science-based industries are found to differ in a number of dimensions from new firms in other industries. They are more likely to be exporters. They face greater technological change and intense competition with regards to the rate at which new products are being introduced. They tend to put more emphasis on quality, the frequent introduction of new products and the customization of products. They make greater use of information technology. They place more stress on new technology development, research and development facilities and the use of intellectual property. They are much more likely to innovate and they place more importance on recruiting skilled labour and on training. Finally, they are more likely to use non-traditional financial measures to evaluate performance and they are less likely to rely on secured credit for financing both their research and development activity and their machinery and equipment that are firms in other sectors.

Description:

Considerable attention has been directed at understanding the structural changes that are generating an increased need for skilled workers. These changes are perceived to be the result of developments associated with the emergence of the new knowledge economy, whose potential is often linked to the growth of new technology-based firms (NTBFs). Where are these firms to be found? Related work on changes in technology and innovativeness has been accompanied by the creation of taxonomies that classify industries as high-tech or high-knowledge, based primarily on the characteristics of large firms. There is a temptation to use these taxonomies to identify new technology-based firms only within certain sectors. This paper uses a special survey that collected data on new firms to argue that this would be unwise.

The paper investigates the limitations of existing classification schemes that might be used to classify industries as high- or low-tech, as advanced or otherwise. Characteristically unidimensional in scope, many of these taxonomies employ conceptual and operational measures that are narrow and incomplete. Consequently, previous rankings that identify sectors as high- or low-tech using these measures obscure the degree of innovativeness and human capital formation exhibited by certain industries. In a policy environment wherein emotive 'scoreboard' classifications have direct effects on resource allocation, the social costs of misclassification are potentially significant.

Using a comparative methodology, this study investigates the role that conceptualization plays in devising taxonomies of high- and low-tech industries. Far from producing definitive classifications, existing measures of technological advancement are found to be wanting when their underpinnings are examined closely. Our objective in the current analysis is to examine the limitations of standard classification schemes, particularly when applied to new small firms, and to suggest an alternative framework based on a competency-model of the firm.

Description:

Statistics Canada is engaged in the "Information System for Science and Technology Project" to develop useful indicators of activity and a framework to tie them together into a coherent picture of science and technology (S&T) in Canada. The working papers series is used to publish results of the different initiatives conducted within this project. The data are related to the activities, linkages and outcomes of S&T. Several key areas are covered such as: innovation, technology diffusion, human resources in S&T and interrelations between different actors involved in S&T. This series also presents data tabulations taken from regular surveys on research and development (R&D) and S&T and made possible by the project.

Description:

Homicide – the killing of one human being by another - tends to receive more media attention than any other criminal act. Governments, criminal justice agencies and the general public have a vested interest in monitoring the nature and extent of these occurrences. Despite a growing concern among Canadians about violence, the homicide rate has gradually been declining since the mid 1970s.

Description:

Statistics Canada is engaged in a project "Information System for Science and Technology" which purpose is to develop useful indicators of activity and a framework to tie them together into a coherent picture of science and technology (S&T) in Canada. The Working papers series is used to publish results of the different initiatives conducted within this project. The produced data are related to the activities, linkages and outcomes of S&T. Several key areas are covered such as: innovation, technology diffusion, human resources in S&T and interrelations between different actors involved in S&T. This series also presents important data tabulations taken from regular surveys on R&D and S&T and made possible because of the existing Project.

Description:

This paper presents the magnitude of the problem, its impact, the methodology to adjust for anticipated revisions and how it reduces the underestimate.

Description:

This study examines whether the Survey of Labour and Income Dynamics (SLID) could provide the same data as the Absence from Work Survey (AWS), and if so, how the estimates compare between the two surveys.

Description:

This paper gives an overview of the different sources of errors that occur with this methodology and presents some results on the impact of this mixed approach. The research has focused on micro-comparisons and has attempted to quantify the impact on measures of change.

Description:

Homicide tends to receive more media attention and consequently closer public scrutiny than any other criminal act. The act itself, especially if cruel in nature or targeting defenceless members of society, promotes fear in the general public. Despite a growing concern among Canadians about threats of attack or violence, the homicide rate has gradually been declining since the mid 1970s.

Description: This handbook complements the tables of the Pan-Canadian Education Indicators Program (PCEIP). It is a guide that provides general descriptions for each indicator and indicator component. PCEIP has five broad indicator sets: a portrait of the school-age population; financing education systems; elementary and secondary education; postsecondary education; and transitions and outcomes.

The Pan-Canadian Education Indicators Program (PCEIP) is a joint venture of Statistics Canada and the Council of Ministers of Education, Canada.

Description: The Canadian Survey on Disability (CSD) is a national survey of Canadians aged 15 and over whose everyday activities are limited because of a long-term condition or health-related problem. The 2022 CSD Concepts and Methods Guide is designed to assist CSD data users by providing relevant information on survey content and concepts, sampling design, collection methods, data processing, data quality and product availability.

Description: This electronic publication presents the methodology underlying the production of the life tables for Canada, provinces and territories.

Description: The Census Subdivision Boundary File contains the boundaries of all census subdivisions which combined cover all of Canada. A census subdivision is a municipality or an area treated as an equivalent to a municipality for statistical purposes (for example, Indian reserves and unorganized territories). The file provides a framework for mapping and spatial analysis using commercially available geographic information systems (GIS) or other mapping software.

The Census Subdivision Boundary File is portrayed in Lambert conformal conic projection and is based on the North American Datum of 1983 (NAD83). A reference guide is available (92-162-G).

Description: This reference guide is intended for users of the Census Subdivisions Boundary File. The guide provides an overview of the file, the general methodology used to create it, and important technical information for users.

Description: This document introduces and describes updates to the Labour Force Survey estimates in January 2023. These updates include the transition to National Occupational Classification (NOC) 2021 as well as enhancements to the LFS data processing system.

Description:

This paper introduces and explains modifications made to the Labour Force Survey estimates.

Description: This report aims to describe the methods used for the calculation of projection parameters, the various projection assumptions and their rationales.

Description:

This guide describes the content and applications of the product, as well as providing information on data quality, record layouts, and methodology.

Description:

This guide describes the content and applications of the product, as well as providing information on data quality, methodology and installation instructions.