Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Geography

3 facets displayed. 0 facets selected.

Survey or statistical program

74 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (287)

All (287) (40 to 50 of 287 results)

  • Articles and reports: 82-003-X201500514169
    Description:

    The Cancer Risk Management Model incorporates the risk of developing cancer, disease screening and clinical management with cost and labour data to assess health outcomes and economic impact. A screening module added to the lung cancer module enables a variety of scenarios to be evaluated for different target populations with varying rates of participation, compliance, and frequency of low-dose computed tomography screening.

    Release date: 2015-05-20

  • Surveys and statistical programs – Documentation: 13-605-X201500414166
    Description:

    Estimates of the underground economy by province and territory for the period 2007 to 2012 are now available for the first time. The objective of this technical note is to explain how the methodology employed to derive upper-bound estimates of the underground economy for the provinces and territories differs from that used to derive national estimates.

    Release date: 2015-04-29

  • Articles and reports: 13-604-M2015077
    Description:

    This new dataset increases the information available for comparing the performance of provinces and territories across a range of measures. It combines often fragmented provincial time series data that, as such, are of limited utility for examining the evolution of provincial economies over extended periods. More advanced statistical methods, and models with greater breadth and depth, are difficult to apply to existing fragmented Canadian data. The longitudinal nature of the new provincial dataset remedies this shortcoming. This report explains the construction of the latest vintage of the dataset. The dataset contains the most up-to-date information available.

    Release date: 2015-02-12

  • Surveys and statistical programs – Documentation: 71F0031X2015001
    Geography: Canada
    Description:

    This paper introduces and explains modifications made to the Labour Force Survey estimates in January 2015. Some of these modifications include the adjustment of all LFS estimates to reflect population counts based on the 2011 Census and includes updates to 2011 Geography classification system.

    Release date: 2015-01-28

  • Surveys and statistical programs – Documentation: 71F0031X
    Description:

    This paper introduces and explains modifications made to the Labour Force Survey estimates.

    Release date: 2015-01-28

  • Articles and reports: 11F0027M2014092
    Geography: Province or territory
    Description:

    Using data from the Provincial KLEMS database, this paper asks whether provincial economies have undergone structural change in their business sectors since 2000. It does so by applying a measure of industrial change (the dissimilarity index) using measures of output (real GDP) and hours worked. The paper also develops a statistical methodology to test whether the shifts in the industrial composition of output and hours worked over the period are due to random year-over-year changes in industrial structure or long-term systematic change in the structure of provincial economies. The paper is designed to inform discussion and analysis of recent changes in industrial composition at the national level, notably, the decline in manufacturing output and the concomitant rise of resource industries, and the implications of this change for provincial economies.

    Release date: 2014-05-07

  • 91C0025
    Description:

    The migration data are released annually from a modelled databank that monitors and tracks the movements of people to and within Canada. Data are derived from the comparison of two consecutive years of tax files. Most current data show migration between 2011 and 2012.

    Data on international migration and internal migration are generally available 15 to 18 months after the tax filing deadline.

    The data consist of estimates of migration flows between census divisions (CDs) or census metropolitan areas (CMAs), by sex and broad age groups. Information may be requested by province of origin/destination, by age group, by type of migration (interprovincial, intraprovincial and international) and sex; and for migration flows by census division of origin/destination, or by census metropolitan area/non-census metropolitan area of origin/destination. The statistics are derived from the annual tax file provided by the Canada Revenue Agency.

    Note:Intraprovincial migration: movement of people between two CDs or CMAs located within the same province. The CD/CMA of departure is the CD/CMA of origin and the CD/CMA of arrival is the CD/CMA of destination.Interprovincial migration: movement of people between CDs and CMAs located in two different provinces. The province of departure is the province of origin and the province of arrival is the province of destination.International migration: movement of people between an area in Canada and another country.Migration flows: migration flows for any given CD or CMA. The flows are listed in descending order of net migration for the most recent year of migration.

    Release date: 2013-10-16

  • Articles and reports: 12-001-X201300111823
    Description:

    Although weights are widely used in survey sampling their ultimate justification from the design perspective is often problematical. Here we will argue for a stepwise Bayes justification for weights that does not depend explicitly on the sampling design. This approach will make use of the standard kind of information present in auxiliary variables however it will not assume a model relating the auxiliary variables to the characteristic of interest. The resulting weight for a unit in the sample can be given the usual interpretation as the number of units in the population which it represents.

    Release date: 2013-06-28

  • Articles and reports: 12-001-X201300111824
    Description:

    In most surveys all sample units receive the same treatment and the same design features apply to all selected people and households. In this paper, it is explained how survey designs may be tailored to optimize quality given constraints on costs. Such designs are called adaptive survey designs. The basic ingredients of such designs are introduced, discussed and illustrated with various examples.

    Release date: 2013-06-28

  • Surveys and statistical programs – Documentation: 12-001-X201300111825
    Description:

    A considerable limitation of current methods for automatic data editing is that they treat all edits as hard constraints. That is to say, an edit failure is always attributed to an error in the data. In manual editing, however, subject-matter specialists also make extensive use of soft edits, i.e., constraints that identify (combinations of) values that are suspicious but not necessarily incorrect. The inability of automatic editing methods to handle soft edits partly explains why in practice many differences are found between manually edited and automatically edited data. The object of this article is to present a new formulation of the error localisation problem which can distinguish between hard and soft edits. Moreover, it is shown how this problem may be solved by an extension of the error localisation algorithm of De Waal and Quere (2003).

    Release date: 2013-06-28
Data (14)

Data (14) (0 to 10 of 14 results)

  • Public use microdata: 12M0026X
    Description:

    This package was designed to help users access and manipulate the public use microdata file (PUMF – provincial) for the 2014 General Social Survey (GSS) on Canadians’ Safety (Victimization). It contains the PUMF data and describes the objectives, methodology and estimation procedures for this survey as well as guidelines for releasing estimates.

    Statistics Canada collected data on the topic of Canadians’ safety (Victimization) for the sixth time in 2014. Data were previously collected in 1988 (Cycle 3), 1993 (Cycle 8), 1999 (Cycle 13), 2004 (Cycle 18) and 2009 (Cycle 23). The 2014 provincial GSS collected data from persons aged 15 years and over living in private households in Canada, excluding residents of the Yukon, Northwest Territories and Nunavut and full time residents of institutions.

    Between 2009 and 2014, the core content of the survey was revised in a number of ways, based on experience gained from earlier iterations. Some questions were revised to improve their clarity for respondents, and others were added or dropped following consultations with stakeholders from the justice sector, government and academic communities.

    Release date: 2016-07-27

  • Public use microdata: 12M0023X
    Description:

    This package was designed to enable users to access and manipulate the microdata file for Cycle 23 (2009) of the General Social Survey (GSS). It contains information on the objectives, methodology and estimation procedures, as well as guidelines for releasing estimates based on the survey.

    Cycle 23 collected data from persons 15 years and over living in private households in Canada, excluding residents of the Yukon, Northwest Territories and Nunavut; and full-time residents of institutions.

    The purpose of this survey is to better understand how Canadians perceive crime and the justice system and their experiences of victimization. The survey is designed to produce estimates of the extent to which persons are the victims of eight types of offences (assault, sexual assault, robbery, theft of personal property, breaking and entering, motor vehicle theft, theft of household property and vandalism); to examine the risk factors associated with victimization; to examine the rates of reporting to the police; and to evaluate the fear of crime and public perceptions of crime and the criminal justice system.

    Cycle 23 is the fifth cycle of the GSS dedicated to collecting data on victimization. Previous cycles had been conducted in 1988, 1993, 1999 and 2004. Cycle 23 includes most of the content from previous cycles as well as new content, added to reflect the society's emerging issues of crime prevention and Internet victimization.

    Release date: 2011-02-10

  • Public use microdata: 12M0021X
    Description:

    This package was designed to enable users to access and manipulate the microdata file for the 21st cycle (2007) of the General Social Survey (GSS). It contains information on the objectives, methodology and estimation procedures, as well as guidelines for releasing estimates based on the survey. Cycle 21 of the GSS collected data from persons aged 45 years and over living in private households in the 10 provinces of Canada. The survey covered a wide range of topics such as well-being, family composition, retirement decisions and plans, care giving and care receiving experiences, social networks and housing.

    Release date: 2009-05-04

  • Public use microdata: 12M0015X
    Geography: Canada
    Description:

    Cycle 15 of the General Social Survey (GSS) is the third cycle to collect detailed information on family life in Canada. The previous GSS cycles that collected family data were Cycles 5 and 10. Topics include demographic characteristics such as age, sex, and marital status; family origin of parents; brothers and sisters; marriages of respondent; common-law unions of respondent; fertility and family intentions; values and attitudes; education history; work history; main activity and other characteristics.

    The target population for Cycle 15 of the GSS is all persons 15 years of age and older in Canada, excluding residents of the Yukon, Northwest Territories, and Nunavut, and full-time residents of institutions.

    Release date: 2003-04-04

  • Table: 85-226-X
    Geography: Province or territory
    Description:

    This publication presents data on young offender admissions to custody and community services, with breakdowns by custody (remand, secure, open) and probation, and key case characteristics, such as age, sex, Aboriginal/non-Aboriginal status and most serious offence. In addition, it includes data pertaining to releases from remand, secure custody and open custody, by sex and time served. These breakdowns are presented at the national and provincial/territorial levels.

    Data presented in this publication are drawn from two primary sources: 1) The Youth Custody and Community Services (YCCS) Survey. The objective of this survey is to collect and analyse information on the application of dispositions under the Young Offenders Act from provincial and territorial agencies responsible for youth corrections and programs. 2) The Youth Key Indicator Report (YKIR). This survey measures the average counts of youth in custody (remand, secure and open) and on probation. The YKIR describes average daily counts (caseload), which measure the volume of offenders held in custody or on probation on an average day at month-end. This information also provides an examination of youth incarceration and probation rates in Canada.

    Release date: 2002-10-09

  • Thematic map: 16F0025X
    Description:

    This Statistics Canada publication is a collection of five annotated maps and graphs that describe the geographic distribution of manure in Canada by river basin. The amount of manure produced is estimated along with some of the major substances found in manure: (i) nitrogen, (ii) phosphorus, (iii) total coliform bacteria and (iv) fecal coliform bacteria.

    The maps and figures presented in this report indicate that there are geographic areas in Canada characterized by higher levels of total livestock manure and related production of nitrogen, phosphorus and bacteria. Areas that repeatedly showed the highest levels were found in central and southern Alberta, southern Manitoba, southern Ontario, southeastern Quebec, parts of Prince Edward Island, the west Fraser River area in southern British Columbia and an area near Wolfville and Kentville, Nova Scotia.

    Release date: 2001-02-22

  • Table: 63-236-X
    Description:

    This publication presents data on revenue and expense items from wholesalers and retailers by trade group and by province. There are 16 retail trade groups and 11 wholesale trade groups. Profiles of the retail trade groups are provided for each individual province/territory and are comprised of: number of locations, total operating revenues, cost of goods sold, gross margin and employee earnings and benefits. At the national level for each retail trade group are the following performance indicators: sales to inventory, cost of goods sold to inventory, gross margin and profit margin. Also provided at the national level are total operating revenues, number of locations for independent and for chain stores, the number of retail businesses by trade and total operating revenue by SIC (4 digit when possible).

    The 11 wholesale trade groups, plus grain and petroleum products, are profiled for each individual province/territory giving: number of locations, total operating revenues, cost of goods sold, gross margin and employee earnings and benefits. Performance indicators by trade group at the national level including sales to inventory, cost of goods sold to inventory, gross margin and profit margin are provided. Total operating revenue at the national level by Standard Industrial Classification and by class of customer and trade group are also provided.

    Release date: 2001-02-05

  • Table: 74-201-X
    Description:

    This publication presents information on the income, expenditure and assets of all trusteed pension funds in Canada in both the public and private sectors. Data are presented at the Canada level. The publication contains an analysis of the funds based on the size of the fund, the number of members and the type of benefit. It is a continuation of a series of reports produced since 1957. As a single pool of investment capital in Canada, these funds are surpassed in size only by the aggregate reserves held by the chartered banks.

    Release date: 2000-07-17

  • Table: 92F0138M2000001
    Description:

    With this working paper, Statistics Canada is releasing 1991 Census data tabulated by a new geographic classification called "census metropolitan area and census agglomeration influenced zones", or MIZ. This classification applies to census subdivisions (municipalities) that lie outside census metropolitan areas and census agglomerations. This part of Canada covers 96% of the country's total land mass and contains 22% of its population, yet up to now we have been limited in our means of differentiating this vast area. The MIZ classification shows the influence of census metropolitan areas (CMA) and census agglomerations (CA) on surrounding census subdivisions as measured by commuting flows based on 1991 Census place of work data. This version of the MIZ classification also incorporates a preliminary version of a north concept that flags census subdivisions according to their location in the north or south of Canada.

    The series of tables presented here show detailed demographic, social and economic characteristics for Canada as a whole, for the six major regions of Canada, and for individual provinces and territories. Within each table, the data are subdivided into five categories: census metropolitan area or census agglomeration, strong MIZ, moderate MIZ, weak MIZ and no MIZ. Within each of these categories, the data are further subdivided into north and south.

    Readers are invited to review and use the data tables to assess whether this combined MIZ and north/south classification of non-CMA/CA areas provides sufficient detail to support data analysis and research. The intent of this MIZ classification is to reveal previously hidden data detail and thereby help users address issues related to this vast geographic area.

    This is the first of three related Geography working papers (catalogue no. 92F0138MPE). The second working paper (no. 2000-2, 92F0138MPE00002) provides background information about the methodology used to delineate the MIZ classification. The third working paper (no. 2000-3, 92F0138MPE00003) describes the methodology used to define a continuous line across Canada that separates the north from the south to further differentiate the MIZ classification.

    Release date: 2000-02-03

  • Table: 62F0040X1999002
    Description:

    Consulting Engineering Services Price Index (CEPI) is an annual index that measures changes in the prices for services provided by consulting engineers. These services encompass advisory and design work as well as construction or project management. They are provided for many types of projects (fields of specialization), and to both Canadian and foreign clients. Price indexes are published for 10 fields of specialization as well as for national, regional, and foreign markets.

    Release date: 1999-10-14
Analysis (197)

Analysis (197) (60 to 70 of 197 results)

  • Articles and reports: 65-507-M2010008
    Description:

    This issue presents exporter statistics from 1993 to 2007 including the number of exporters, the value of their domestic exports by industry, exporter size, destination and province of residence as well as employment statistics of exporting establishments for the year 2007. The data in this issue are at the establishment level and are derived from the Exporter Register Database.

    Release date: 2010-01-27

  • Articles and reports: 82-003-X201000111066
    Geography: Canada
    Description:

    This article considers critical quality control and data reduction procedures that should be addressed before physical activity information is derived from accelerometry data.

    Release date: 2010-01-13

  • Articles and reports: 85F0033M2010022
    Geography: Canada
    Description:

    A large proportion of all victimization incidents are experienced by a relatively small number of victims who experienced multiple incidents. According to the 2004 General Social Survey (GSS) on Victimization, a little more than 10% of the population aged 15 and over were the victims of more than one crime during the 12 months preceding the survey, representing 60% of all criminal incidents. If one considers only violent crimes, 2% of the population accounted for 60% of all violent victimization reported to the GSS.

    Given that a small proportion of individuals and households face a significant proportion of crimes, as a result determining which characteristics increases a person's risk of being victimized will help to improve the effectiveness of crime prevention measures, and perhaps help prevent further incidents of victimization.

    Release date: 2010-01-06

  • Articles and reports: 11F0027M2009058
    Geography: Canada
    Description:

    This paper examines the different types of deflators that are used to compare volume estimates of national income and production across countries. It argues that these deflators need to be tailored to the specific income concept used for study. If the potential to spend concept is employed, a purchasing power deflator is needed. If a production based concept is used, a producing power deflator is necessary. The paper argues that present practice produces a hybrid deflator that fails both purposes when terms of trade shifts are large and offers a solution.

    Release date: 2009-12-10

  • Articles and reports: 11-522-X200800010920
    Description:

    On behalf of Statistics Canada, I would like to welcome you all, friends and colleagues, to Symposium 2008. This the 24th International Symposium organized by Statistics Canada on survey methodology.

    Release date: 2009-12-03

  • Articles and reports: 11-522-X200800010937
    Description:

    The context of the discussion is the increasing incidence of international surveys, of which one is the International Tobacco Control (ITC) Policy Evaluation Project, which began in 2002. The ITC country surveys are longitudinal, and their aim is to evaluate the effects of policy measures being introduced in various countries under the WHO Framework Convention on Tobacco Control. The challenges of organization, data collection and analysis in international surveys are reviewed and illustrated. Analysis is an increasingly important part of the motivation for large scale cross-cultural surveys. The fundamental challenge for analysis is to discern the real response (or lack of response) to policy change, separating it from the effects of data collection mode, differential non-response, external events, time-in-sample, culture, and language. Two problems relevant to statistical analysis are discussed. The first problem is the question of when and how to analyze pooled data from several countries, in order to strengthen conclusions which might be generally valid. While in some cases this seems to be straightforward, there are differing opinions on the extent to which pooling is possible and reasonable. It is suggested that for formal comparisons, random effects models are of conceptual use. The second problem is to find models of measurement across cultures and data collection modes which will enable calibration of continuous, binary and ordinal responses, and produce comparisons from which extraneous effects have been removed. It is noted that hierarchical models provide a natural way of relaxing requirements of model invariance across groups.

    Release date: 2009-12-03

  • Articles and reports: 11-522-X200800010941
    Description:

    Prior to 2004, the design and development of collection functions at Statistics New Zealand (Statistics NZ) was done by a centralised team of data collection methodologists. In 2004, an organisational review considered whether the design and development of these functions was being done in the most effective way. A key issue was the rising costs of surveying as the organisation moved from paper-based data collection to electronic data collection. The review saw some collection functions decentralised. However, a smaller centralised team of data collection methodologists was retained to work with subject matter areas across Statistics NZ.

    This paper will discuss the strategy used by the smaller centralised team of data collection methodologists to support subject matter areas. There are three key themes to the strategy. First, is the development of best practice standards and a central standards repository. Second, is training and introducing knowledge sharing forums. Third, is providing advice and independent review to subject matter areas which design and develop collection instruments.

    Release date: 2009-12-03

  • Articles and reports: 11-522-X200800010954
    Description:

    Over the past year, Statistics Canada has been developing and testing a new way to monitor the performance of interviewers conducting computer-assisted personal interviews (CAPI). A formal process already exists for monitoring centralized telephone interviews. Monitors listen to telephone interviews as they take place to assess the interviewer's performance using pre-defined criteria and provide feedback to the interviewer on what was well done and what needs improvement. For the CAPI program, we have developed and are testing a pilot approach whereby interviews are digitally recorded and later a monitor listens to these recordings to assess the field interviewer's performance and provide feedback in order to help improve the quality of the data. In this paper, we will present an overview of the CAPI monitoring project at Statistics Canada by describing the CAPI monitoring methodology and the plans for implementation.

    Release date: 2009-12-03

  • Articles and reports: 11-522-X200800010955
    Description:

    Survey managers are still discovering the usefulness of digital audio recording for monitoring and managing field staff. Its value so far has been for confirming the authenticity of interviews, detecting curbstoning, offering a concrete basis for feedback on interviewing performance and giving data collection managers an intimate view of in-person interviews. In addition, computer audio-recorded interviewing (CARI) can improve other aspects of survey data quality, offering corroboration or correction of response coding by field staff. Audio recordings may replace or supplement in-field verbatim transcription of free responses, and speech-to-text technology might make this technique more efficient in the future.

    Release date: 2009-12-03

  • Articles and reports: 11-522-X200800010957
    Description:

    Business surveys differ from surveys of populations of individual persons or households in many respects. Two of the most important differences are (a) that respondents in business surveys do not answer questions about characteristics of themselves (such as their experiences, behaviours, attitudes and feelings) but about characteristics of organizations (such as their size, revenues, policies, and strategies) and (b) that they answer these questions as an informant for that organization. Academic business surveys differ from other business surveys, such as of national statistical agencies, in many respects as well. The one most important difference is that academic business surveys usually do not aim at generating descriptive statistics but at testing hypotheses, i.e. relations between variables. Response rates in academic business surveys are very low, which implies a huge risk of non-response bias. Usually no attempt is made to assess the extent of non-response bias and published survey results might, therefore, not be a correct reflection of actual relations within the population, which in return increases the likelihood that the reported test result is not correct.

    This paper provides an analysis of how (the risk of) non-response bias is discussed in research papers published in top management journals. It demonstrates that non-response bias is not assessed to a sufficient degree and that, if attempted at all, correction of non-response bias is difficult or very costly in practice. Three approaches to dealing with this problem are presented and discussed:(a) obtaining data by other means than questionnaires;(b) conducting surveys of very small populations; and(c) conducting surveys of very small samples.

    It will be discussed why these approaches are appropriate means of testing hypotheses in populations. Trade-offs regarding the selection of an approach will be discussed as well.

    Release date: 2009-12-03
Reference (75)

Reference (75) (0 to 10 of 75 results)

  • Geographic files and documentation: 92-162-G
    Description:

    This guide describes the content and applications of the product, as well as providing information on data quality, record layouts and methodology.

    Release date: 2019-11-13

  • Geographic files and documentation: 92-162-X
    Description:

    The Census Subdivision Boundary File contains the boundaries of all census subdivisions which combined cover all of Canada. A census subdivision is a municipality or an area treated as an equivalent to a municipality for statistical purposes (for example, Indian reserves and unorganized territories). The file provides a framework for mapping and geographic analysis that is possible using commercially available geographic information systems (GIS) or other mapping software.

    A reference guide is included.

    Release date: 2019-11-13

  • Surveys and statistical programs – Documentation: 81-582-G
    Description:

    This handbook complements the tables of the Pan-Canadian Education Indicators Program (PCEIP). It is a guide that provides general descriptions for each indicator and indicator component. PCEIP has five broad indicator sets: a portrait of the school-age population; financing education systems; elementary and secondary education; postsecondary education; and transitions and outcomes.

    The Pan-Canadian Education Indicators Program (PCEIP) is a joint venture of Statistics Canada and the Council of Ministers of Education, Canada.

    Release date: 2019-09-18

  • Surveys and statistical programs – Documentation: 91-620-X
    Description:

    This report aims to describe the methods used for the calculation of projection parameters, the various projection assumptions and their rationales.

    Release date: 2019-09-17

  • Surveys and statistical programs – Documentation: 84-538-X
    Geography: Canada
    Description:

    This document presents the methodology underlying the production of the life tables for Canada, provinces and territories, from reference period 1980/1982 and onward.

    Release date: 2019-05-30

  • Surveys and statistical programs – Documentation: 71-526-X
    Description:

    The Canadian Labour Force Survey (LFS) is the official source of monthly estimates of total employment and unemployment. Following the 2011 census, the LFS underwent a sample redesign to account for the evolution of the population and labour market characteristics, to adjust to changes in the information needs and to update the geographical information used to carry out the survey. The redesign program following the 2011 census culminated with the introduction of a new sample at the beginning of 2015. This report is a reference on the methodological aspects of the LFS, covering stratification, sampling, collection, processing, weighting, estimation, variance estimation and data quality.

    Release date: 2017-12-21

  • Surveys and statistical programs – Documentation: 92-150-G
    Description:

    This guide describes the content and applications of the product, as well as providing information on data quality, methodology and installation instructions.

    Release date: 2017-11-29

  • Geographic files and documentation: 92-160-G
    Description:

    This reference guide is intended for users of the census boundary files. The guide provides an overview of the files, the general methodology used to create them, and important technical information for users.

    Release date: 2017-09-13

  • Surveys and statistical programs – Documentation: 12-586-X
    Description:

    The Quality Assurance Framework (QAF) serves as the highest-level governance tool for quality management at Statistics Canada. The QAF gives an overview of the quality management and risk mitigation strategies used by the Agency’s program areas. The QAF is used in conjunction with Statistics Canada management practices, such as those described in the Quality Guidelines.

    Release date: 2017-04-21

  • Geographic files and documentation: 92-151-G
    Description:

    The reference guide provides an overview of the Geographic Attribute File product, including the general methodology used to create it.

    Release date: 2017-02-08
Date modified: