Keyword search

Description: Lumber, monthly production, shipments and stocks by species; data in thousands of cubic metres.

Description:

Lumber, monthly production, by product; data in thousands of cubic metres.

Description:

Lumber, monthly shipments, by product; data in thousands of cubic metres.

Description:

Lumber, monthly stocks, by product; data in thousands of cubic metres.

Description:

Lumber, monthly production, by species, for British Columbia; data in thousands of cubic metres.

Description:

Lumber, monthly shipments, by species, for British Columbia; data in thousands of cubic metres.

Description: Lumber, monthly stock, by species for British Columbia; data in thousands of cubic metres.

Description: Wood chips, monthly production, shipments and stocks for Canada, British Columbia, British Columbia coast, British Columbia interior and other provinces. The data are in thousands of oven-dry metric tonnes.

Description: Data presented at the national level by supply and disposition characteristic (supply of coal, coal coke received, etc.).

Description: Data presented on petroleum and other liquids by supply and disposition characteristics (e.g., production, exports, inventories, products supplied). Not all combinations are available.

Description: Lumber, monthly production, shipments and stocks by species; data in thousands of cubic metres.

Description:

Lumber, monthly production, by product; data in thousands of cubic metres.

Description:

Lumber, monthly shipments, by product; data in thousands of cubic metres.

Description:

Lumber, monthly stocks, by product; data in thousands of cubic metres.

Description:

Lumber, monthly production, by species, for British Columbia; data in thousands of cubic metres.

Description:

Lumber, monthly shipments, by species, for British Columbia; data in thousands of cubic metres.

Description: Lumber, monthly stock, by species for British Columbia; data in thousands of cubic metres.

Description: Wood chips, monthly production, shipments and stocks for Canada, British Columbia, British Columbia coast, British Columbia interior and other provinces. The data are in thousands of oven-dry metric tonnes.

Description: Data presented at the national level by supply and disposition characteristic (supply of coal, coal coke received, etc.).

Description: Data presented on petroleum and other liquids by supply and disposition characteristics (e.g., production, exports, inventories, products supplied). Not all combinations are available.

Description:

This article reviews trends in the manufacturing sector in 2011. Manufacturing sales are examined at the industry level along with other relevant variables. Important drivers, such as price changes and capital expenditures are also presented.

Description:

This paper asks how market expansion contributes to productivity growth. It investigates whether entry to both new international markets and new domestic markets is associated with greater productivity growth. It also examines whether exit from export markets is necessarily associated with deteriorating performance or whether it too can lead to success when associated with movements to new markets. Finally, the paper examines the strategy of firms that move to new markets after they withdraw from export markets in order to examine the differences that set them apart from their counterparts that do not find themselves able to adapt because they simply withdraw to their home domestic markets.

Description:

This study deals with the softwood lumber industry in Canada for the period 2004 to 2010. It analyzes the trend of a number of economic variables, including: sales, production volume, employment, the number of operating sawmills and exports.

Description:

Labour productivity growth in the Canadian business sector slowed substantially after 2000. Most of the slowdown occurred in the manufacturing sector. This paper examines how this slowdown was associated with the restructuring that occurred in manufacturing as a result of the increase in excess capacity, the dramatic increase in the Canada-U.S. exchange rate and a slowdown in export growth.

Description:

Do exporters and foreign-controlled establishments pay their workers higher wages than non-exporters and domestic-controlled establishments? This paper draws on an employer-employee dataset to explore the existence of exporter and foreign-controlled wage premiums in the Canadian manufacturing sector.

Trade and foreign direct investment (FDI) are central to the process of globalization. Over the last 50 years, advocates of greater trade and FDI liberalization have been guided by the notion that removing barriers to both stimulates economic growth. An extensive body of work using newly available micro-data files has emerged comparing the productivity levels of exporters against those of non-exporters, and of foreign-controlled firms against those of domestic firms.

Description:

This study reviews status and trends for the manufacturing sector in 20010. It analyses major provincial and industry shifts in production and puts them in the context of major socio-economic drivers such as employment, productivity, prices and exports.

Description:

This study examines the recent changes in the number and types of manufacturing firms in rural and small town areas; identifies the number and change in manufacturing firms that are part of the value chain of a resource sector; and examines the number and change in manufacturing firms located in rural resource-reliant communities.

Description:

Operation and maintenance (O&M) costs associated with the acquisition and treatment of water will vary by treatment technology, annual production volumes and the type of source water processed. This study analyzes the data collected by the 2007 Survey of Drinking Water Plants to illustrate how O&M costs vary by these factors.

Description:

Potable water of sufficient quality and in adequate quantities is fundamental to human health and the economy. This article examines temporal and geographic variations in drinking water production volumes.

Description:

Employment in manufacturing in Canada has fluctuated over recent decades. The level reached a historically high in 2004 and has been declining since that time.

In 2008, over one-half (54%) of all Canadian manufacturing workers were employed in the value chain of a resource sector.

In 2008, resource sector manufacturing employment was relatively more important in rural and small town areas (69% of manufacturing employment and 9% of total employment) compared to larger urban centres (50% of manufacturing employment and 6% of total employment).

In the 2001 to 2008 period, resource manufacturing employment became a larger share of total manufacturing employment (up from 51% to 54%) because resource manufacturing employment declined less (-6%) compared to the decline of all 'other' manufacturing employment (-18%).

Also, in the 2001 to 2008 period, resource manufacturing employment become relatively more important in rural and small town areas as the decline (-3%) was smaller in rural and small town areas compared to the decline in larger urban centres (-7%).

Within rural and small town areas at the Canada level, 9% of total employment in 2008 was resource sector manufacturing employment. This ranged from 14% within the rural and small town areas of Quebec to 2% within the rural and small town areas of Saskatchewan.

Within rural and small town areas in 2008, employment in wood processing accounted for the largest share of resource sector manufacturing employment (43%).

Description:

The mandate of the Analytical Studies Branch (ASB) is to provide high-quality, relevant and timely information on economic, health and social issues that are important to Canadians. The branch strategically makes use of expert knowledge and a large range of statistical sources to describe, draw inferences from, and make objective and scientifically supported deductions about the evolving nature of the Canadian economy and society. Research questions are addressed by applying leading-edge methods, including microsimulation and predictive analytics using a range of linked and integrated administrative and survey data. In supporting greater access to data, ASB linked data are made available to external researchers and policy makers to support evidence-based decision making. Research results are disseminated by the branch using a range of mediums (i.e., research papers, studies, infographics, videos, and blogs) to meet user needs. The branch also provides analytical support and training, feedback, and quality assurance to the wide range of programs within and outside Statistics Canada.

Description:

This overview document describes the conceptual underpinnings of the Integrated Business Statistics Program and explains how program components facilitate a more integrated approach to economic surveying at Statistics Canada.

Description:

Most of us think of farm animals only as sources of meat, eggs or milk. This article shows the variety of other products and benefits we get from pigs.

Description:

Starting with the August 2004 reference month, the Monthly Survey of Manufacturing (MSM) is using administrative data (Goods and Services Tax files) to derive shipments for a portion of the small establishments in the sample. This document is being published to complement the release of MSM data for that month.

Description:

This activity considers some of the new produce we are seeing in Canadian grocery stores. It looks at the origins of these vegetables, and how they made it to the produce aisle.

Description:

This reference document provides a basis for the Estimates for the Industrial Consumption of Energy (ICE) on the North American Industrial Classification System (NAICS) basis for the 1990 reference year. The 1990 ICE is a pivotal year for climate change benchmarks with the signing of the Kyoto Protocol. The 1990 and the 1995-2000 period inclusively provide ICE estimates on the new NAICS which permits users to compare and analyze more recent trends and events with common classification structures.

Description:

This practical and informative guide for manufacturers and exporters will assist in navigating through numerous Statistics Canada products and services. In addition, some recent articles and research papers have been highlighted.

Description:

This on-line product describes the personalization of the long-form questionnaires of Canada's Annual Survey of Manufactures (ASM). Personalization was motivated by the desire to reduce respondent burden. Prior to personalization, long-form questionnaires were the same for all the establishments of a given 4-digit SIC industry. Each questionnaire contained a list comprising almost all the commodities likely to be used as inputs or produced as outputs by that industry. For the typical establishment, only a small subset of the commodities listed was applicable. Personalization involved tailoring those lists to each individual establishment, based on the previous reporting of that same establishment.

After first defining terms and then providing some quantification of the need for personalization, the paper details a number of the prerequisites - an algorithm for commodity selection, a set of stand-alone commodity descriptions, and an automated questionnaire production system. The paper next details a number of the impacts of personalization - and does so in terms of response burden, loss of information, and automation. The paper concludes with a summary and some recommendations.

Description: The objective of this survey is to provide statistics on the technological capabilities of establishments in the food processing industry.

Description: The purpose of this survey is to obtain information on the supply of, and/or demand for, energy in Canada.