Monthly Survey of Manufacturing, October 2018
Manufacturing sales edged down 0.1% in October to $58.2 billion, following four increases in the previous five months. Lower sales at wood product and primary metal industries were largely offset by higher sales at food and machinery industries.
Overall, sales were down in 7 of 21 industries, representing 40.5% of the manufacturing sector. Sales of durable goods decreased 0.9% to $30.0 billion, while sales of non-durable goods rose 0.7% to $28.3 billion.
Constant dollar sales increased 0.2%, indicating a higher volume of goods sold.
Wood product industry posts the largest decrease
Sales at wood product manufacturers were down for the fifth consecutive month, falling 7.5% to $2.6 billion in October. Wood sales typically increase in October but many factors led to the decrease in sales this year, notably the continued decline in prices and timber supply shortages. In constant dollars, sales volumes of wood products fell 5.0%.
Primary metal manufacturing sales were down 3.0% in October to $4.1 billion—the fifth consecutive monthly decline. The decrease in October was largely attributable to lower sales in the non-ferrous metal production and processing and the alumina and aluminum production and processing industries.
Partially offsetting these declines were increases in the food and machinery industries. Food manufacturing industry sales rose 1.5% to $8.7 billion, following two consecutive monthly decreases. The gain in October reflected higher sales in the meat, other food manufacturing and animal food product industries. In constant dollars, sales volumes in the food manufacturing industry increased 1.0%.
Machinery sales rose 2.9% in October to $3.4 billion, led by higher sales in the agricultural, construction and mining machinery as well as the other general-purpose machinery industries.
Sales also increased in the petroleum and coal product (+0.9%), fabricated metal product (+1.6%), motor vehicle parts (+1.7%) and motor vehicle (+0.9%) industries in October.
Sales declines concentrated in Quebec and New Brunswick
In dollar terms, manufacturing sales were down the most in Quebec (-1.5%), New Brunswick (-12.0%) and, to a lesser extent, British Columbia (-0.9%). These declines were partly offset by gains in the other provinces, led by Ontario (+0.7%).
Sales in Quebec fell 1.5% to $13.9 billion in October, following a slight decline in September and largely offsetting the 1.7% increase in August. Manufacturers of aerospace products and parts (-19.1%) and primary metals (-5.3%) reported the largest declines. Despite the decrease, total sales in Quebec were 5.9% higher in October compared with 12 months earlier.
In New Brunswick, manufacturing sales declined for the second consecutive month, mainly as a result of a 13.3% drop in non-durable goods sales. Manufacturing sales totalled $1.3 billion in New Brunswick in October—the lowest level since November 2016.
Sales were down 0.9% to $4.7 billion in British Columbia. The decline was driven by a 7.2% drop in wood product sales to $991 million. Excluding the wood product industry, sales in the rest of the province's manufacturing sector were up 1.0%.
Sales rose 0.7% in Ontario to $26.7 billion in October, a second consecutive monthly gain. The growth was partly attributable to a 2.1% rise in sales in the transportation equipment industry. Sales were also up at petroleum and coal products (+6.2%), fabricated metal products (+7.2%) and machinery (+5.6%) industries. These increases were partially offset by lower sales in chemical product manufacturing (-6.4%), printing and related support activities (-9.6%) and plastics and rubber products (-2.8%) industries.
Sales in Manitoba rose 3.1% to $1.6 billion in October, following an 8.7% decline in September. The increase in October was attributable to higher sales of durable and non-durable goods.
In Saskatchewan, sales were up 3.1% to $1.5 billion, mainly due to higher sales in the non-durable goods industries.
Sales gains in Newfoundland and Labrador (+5.4%) and Nova Scotia (+4.8%) mostly reflected increases in the durable goods industries.
Inventory levels increase
Inventory levels rose 1.0% to $85.0 billion in October. Inventories were up in 14 of 21 industries, with the largest increases in the machinery (+6.3%), transportation equipment (+1.6%) and primary metal (+2.3%) industries. These increases were partially offset by a 2.8% decline in chemical product inventories.
The inventory-to-sales ratio increased from 1.44 in September to 1.46 in October. This ratio measures the time, in months, that would be required to exhaust inventories if sales were to remain at their current level.
Unfilled orders rise
Unfilled orders increased 1.4% to $96.4 billion in October, following a 0.2% decline in September. Most of the gain was attributable to a 1.5% increase in the transportation equipment industry. Unfilled orders in this industry reached $64.7 billion in October, their highest level since January 2016. Unfilled orders also rose in the machinery (+2.2%) and fabricated metal product (+2.1%) industries.
After four consecutive monthly decreases, new orders were up 2.4% to $59.6 billion in October. The gain mostly reflected an increase in new orders in the railroad and rolling stock, other transportation equipment, fabricated metal product and aerospace products and parts manufacturing industries.
Capacity utilization rate
The capacity utilization rate (not seasonally adjusted) for the manufacturing sector declined 1.2 percentage points, from 81.9% in September to 80.7% in October.
Overall, the capacity utilization rate fell in 8 of 21 industries in October, led by the petroleum and coal product and the transportation equipment manufacturing industries.
The capacity utilization rate for the petroleum and coal product industry declined for the third consecutive month, falling 9.0 percentage points to 79.0% in October. Shutdowns were partly responsible for the decrease in October.
The capacity utilization rate of the transportation equipment industry decreased 3.5 percentage points to 83.3%, reflecting the lower capacity utilization rate in the aerospace product and parts industry.
The capacity utilization rate of the primary metal industry rose 2.4 percentage points to 80.2% in October. The increase was mostly attributable to gains in the iron and steel mills, non-ferrous production and processing and foundries industries.
Note to readers
Monthly data in this release are seasonally adjusted and are expressed in current dollars unless otherwise specified.
For information on seasonal adjustment, see Seasonally adjusted data – Frequently asked questions. For information on trend-cycle data, see Trend-cycle estimates – Frequently asked questions.
Non-durable goods industries include food, beverage and tobacco products, textile mills, textile product mills, clothing, leather and allied products, paper, printing and related support activities, petroleum and coal products, chemicals, and plastics and rubber products.
Durable goods industries include wood products, non-metallic mineral products, primary metals, fabricated metal products, machinery, computer and electronic products, electrical equipment, appliances and components, transportation equipment, furniture and related products, and miscellaneous manufacturing.
For the aerospace and shipbuilding industries, the value of production is used instead of the value of sales of goods manufactured. The value of production is calculated by adjusting monthly sales of goods manufactured by the monthly change in inventories of goods in process and finished products manufactured. The value of production is used because of the extended period of time that it normally takes to manufacture products in these industries.
Unfilled orders are a stock of orders that will contribute to future sales assuming that the orders are not cancelled.
New orders are those received, whether sold in the current month or not. New orders are measured as the sum of sales for the current month plus the change in unfilled orders from the previous month to the current month.
Manufacturers reporting sales, inventories and unfilled orders in US dollars
Some Canadian manufacturers report sales, inventories and unfilled orders in US dollars. These data are then converted to Canadian dollars as part of the data production cycle.
For sales, based on the assumption that they occur throughout the month, the monthly average exchange rate for the reference month established by the Bank of Canada is used for the conversion. The monthly average exchange rate is available in table 33-10-0163-01. Inventories and unfilled orders are reported at the end of the reference period. For most respondents, the daily average exchange rate on the last working day of the month is used for the conversion of these variables.
However, some manufacturers choose to report their data as of a day other than the last day of the month. In these instances, the daily average exchange rate on the day selected by the respondent is used. Note that because of exchange rate fluctuations, the daily average exchange rate on the day selected by the respondent can differ from both the exchange rate on the last working day of the month and the monthly average exchange rate. Daily average exchange rate data are available in table 33-10-0036-01.
Each month, the Monthly Survey of Manufacturing releases preliminary data for the reference month and revised data for the three previous months. Revisions are made to reflect new information provided by respondents and updates to administrative data.
Real-time data tables
Real-time data tables 16-10-0118-01, 16-10-0119-01, 16-10-0014-01 and 16-10-0015-01 will be updated on January 4, 2019.
Data from the Monthly Survey of Manufacturing for November 2018 will be released on January 22, 2019.
For more information, contact us (toll-free 1-800-263-1136; 514-283-8300; STATCAN.infostats-infostats.STATCAN@canada.ca). For more information, or to enquire about the concepts, methods or data quality of this release, contact Bechir Oueriemmi (613-951-7938; email@example.com), Mining, Manufacturing and Wholesale Trade Division.
- Date modified: